請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/90618
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊申語 | zh_TW |
dc.contributor.advisor | Sen-Yeu Yang | en |
dc.contributor.author | 譚其節 | zh_TW |
dc.contributor.author | Chi-Jei Tan | en |
dc.date.accessioned | 2023-10-03T16:53:06Z | - |
dc.date.available | 2023-11-09 | - |
dc.date.copyright | 2023-10-03 | - |
dc.date.issued | 2023 | - |
dc.date.submitted | 2023-08-04 | - |
dc.identifier.citation | [1] T. K. S. Liwei Lin, and Chun-Jung Chiu, "Fabrication and Characterization of IC Processed Brightness Enhancement Films " International Conference on Solid State Sensors and Actuators, 1997.
[2] Z. Z. J. Lu, J. W. Lee, and J. M. Kim, "Wide-angle film diffuser," Journal of the Society for Information Display, vol. 15, no. 8, 2007, doi: 10.1889/1.2770856. [3] Y.-K. H. Jin-Yeol Kim, Eung-Ryul Kim, Kwang-Suck Suh, "Two-layer hybrid anti-reflection film prepared on the plastic substrates," Current Applied Physics, 2002. [4] M. W. a. S. K. Nayar, "Telecentric Optics for Focus Analysis," IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE, 1997. [5] P. Halevi, "Photonic Crystal Optics and Homogenization of 2D Periodic Composites," The American Physical Society, 1998. [6] W. Yuan, L.-H. Li, W.-B. Lee, and C.-Y. Chan, "Fabrication of Microlens Array and Its Application: A Review," Chinese Journal of Mechanical Engineering, vol. 31, no. 1, 2018, doi: 10.1186/s10033-018-0204-y. [7] S. Cai, Y. Sun, H. Chu, W. Yang, H. Yu, and L. Liu, "Microlenses arrays: Fabrication, materials, and applications," Microsc Res Tech, vol. 84, no. 11, pp. 2784-2806, Nov 2021, doi: 10.1002/jemt.23818. [8] M. Worgull, Hot embossing: theory and technology of microreplication. William Andrew, 2009. [9] L. Peng, H. Wu, Y. Shu, P. Yi, Y. Deng, and X. Lai, "Roll-to-roll hot embossing system with shape preserving mechanism for the large-area fabrication of microstructures," Review of Scientific Instruments, vol. 87, no. 10, p. 105120, 2016. [10] T. Mäkelä, T. Haatainen, P. Majander, J. Ahopelto, and V. Lambertini, "Continuous double-sided roll-to-roll imprinting of polymer film," Japanese journal of applied physics, vol. 47, no. 6S, p. 5142, 2008. [11] 吳景棠, "Development of a gasbag-roller-assisted UV imprint process and its application," Doctoral, Mechanical Engineering, National Taiwan University, 2010. [12] A. Striegel, M. Schneider, N. Schneider, C. Benkel, and M. Worgull, "Seamless tool fabrication for Roll-to-Roll microreplication," Microelectronic Engineering, vol. 194, pp. 8-14, 2018. [13] M. F. Land, "Variations in the structure and design of compound eyes," in Facets of vision: Springer, 1989, pp. 90-111. [14] M. F. Land and D.-E. Nilsson, Animal eyes. OUP Oxford, 2012. [15] M. F. Land, "The optics of animal eyes," Contemporary Physics, vol. 29, no. 5, pp. 435-455, 1988. [16] Y. C. Chen, "Lens effect on synthetic image generation based on light particle theory," The Visual Computer, vol. 3, no. 3, pp. 125-136, 1987. [17] J. Duparré and F. Wippermann, "Micro-optical artificial compound eyes, "Bioinspiration & biomimetics, vol. 1, no. 1, p. R1, 2006. [18] J. Pascault and R. Williams, "Glass transition temperature versus conversion relationships for thermosetting polymers," Journal of Polymer Science Part B: Polymer Physics, vol. 28, no. 1, pp. 85-95, 1990. [19] H. Becker and U. Heim, "Hot embossing as a method for the fabrication of polymer high aspect ratio structures," Sensors and Actuators A: Physical, vol. 83, no. 1-3, pp. 130-135, 2000. [20] S. Y. Chou, P. R. Krauss, and P. J. Renstrom, "Nanoimprint lithography," Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, vol. 14, no. 6, pp. 4129-4133, 1996. [21] A. Revzin et al., "Fabrication of poly (ethylene glycol) hydrogel microstructures using photolithography," Langmuir, vol. 17, no. 18, pp. 5440-5447, 2001. [22] N. Kooy, K. Mohamed, L. T. Pin, and O. S. Guan, "A review of roll-to-roll nanoimprint lithography," Nanoscale research letters, vol. 9, no. 1, pp. 1-13, 2014. [23] M. T. Gale, "Replication techniques for diffractive optical elements, "Microelectronic Engineering, vol. 34, no. 3-4, pp. 321-339, 1997. [24] S. Ng and Z. Wang, "Hot roller embossing for microfluidics: process and challenges," Microsystem technologies, vol. 15, no. 8, pp. 1149-1156, 2009. [25] Y.-C. Lee, H.-W. Chen, and F.-B. Hsiao, "Fabrication of seamless roller mold for continuous roller imprinting of microlens array films," Journal of microelectromechanical systems, vol. 21, no. 2, pp. 316-323, 2011. [26] J. J. Dumond and H. Yee Low, "Recent developments and design challenges in continuous roller micro-and nanoimprinting," Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena, vol. 30, no. 1, p. 010801, 2012. [27] H. Deckman and J. Dunsmuir, "Natural lithography," Applied Physics Letters, vol. 41, no. 4, pp. 377-379, 1982. [28] D. J. Norris, E. G. Arlinghaus, L. Meng, R. Heiny, and L. Scriven, "Opaline photonic crystals: how does self‐assembly work?" Advanced Materials, vol. 16, no. 16, pp. 1393-1399, 2004. [29] X. Bulliard et al., "Enhanced performance in polymer solar cells by surface energy control," Advanced Functional Materials, vol. 20, no. 24, pp. 4381-4387, 2010. [30] X. Zhang, C. R. Yonzon, and R. P. Van Duyne, "Nanosphere lithography fabricated plasmonic materials and their applications," Journal of Materials Research, vol. 21, no. 5, pp. 1083-1092, 2006. [31] H. J. Nam, D.-Y. Jung, G.-R. Yi, and H. Choi, "Close-packed hemispherical microlens array from two-dimensional ordered polymeric microspheres, "Langmuir, vol. 22, no. 17, pp. 7358-7363, 2006. [32] Y. Ishihara and K. Tanigaki, "A high photosensitive IL-CCD image sensor with monolithic resin lens array," in 1983 International Electron Devices Meeting, 1983: IEEE, pp. 497-500. [33] Z. D. Popovic, R. A. Sprague, and G. N. Connell, "Technique for monolithic fabrication of microlens arrays," Applied optics, vol. 27, no. 7, pp. 1281-1284, 1988. [34] C. Pan and C. Su, "Fabrication of gapless triangular micro-lens array," Sensors and Actuators A: Physical, vol. 134, no. 2, pp. 631-640, 2007. [35] J. Qiu, M. Li, H. Ye, J. Zhu, and C. Ji, "Fabrication of high fill-factor microlens array using spatially constrained thermal reflow," Sensors and Actuators A: Physical, vol. 279, pp. 17-26, 2018. [36] B. Yang, J. Zhou, Q. Chen, L. Lei, and K. Wen, "Fabrication of hexagonal compound eye microlens array using DMD-based lithography with dose modulation," Optics Express, vol. 26, no. 22, pp. 28927-28937, 2018. [37] D. MacFarlane, V. Narayan, J. Tatum, W. Cox, T. Chen, and D. Hayes, "Microjet fabrication of microlens arrays," IEEE Photonics Technology Letters, vol. 6, no. 9, pp. 1112-1114, 1994. [38] J.-P. Lu, W.-K. Huang, and F.-C. Chen, "Self-positioning microlens arrays prepared using ink-jet printing," Optical Engineering, vol. 48, no. 7, p. 073606, 2009. [39] J. Y. Kim, K. Pfeiffer, A. Voigt, G. Gruetzner, and J. Brugger, "Directly fabricated multi-scale microlens arrays on a hydrophobic flat surface by a simple ink-jet printing technique," Journal of Materials Chemistry, vol. 22, no. 7, pp. 3053-3058, 2012. [40] X. Zhu et al., "Flexible biconvex microlens array fabrication using combined inkjet-printing and imprint-lithography method," Optics & Laser Technology, vol. 115, pp. 118-124, 2019. [41] Q. Zhang et al., "Fabrication of Microlens Arrays with High Quality and High Fill Factor by Inkjet Printing," Advanced Optical Materials, vol. 10, no. 14, p. 2200677, 2022. [42] L.-W. Pan, X. Shen, and L. Lin, "Microplastic lens array fabricated by a hot intrusion process," Journal of microelectromechanical systems, vol. 13, no. 6, pp. 1063-1071, 2004. [43] C.-Y. Chang, S.-Y. Yang, L.-S. Huang, and J.-H. Chang, "Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon mold, "Infrared physics & technology, vol. 48, no. 2, pp. 163-173, 2006. [44] D. Xie, X. Chang, X. Shu, Y. Wang, H. Ding, and Y. Liu, "Rapid fabrication of thermoplastic polymer refractive microlens array using contactless hot embossing technology," Optics Express, vol. 23, no. 4, pp. 5154-5166, 2015. [45] K. Li, G. Xu, X. Huang, Z. Xie, and F. Gong, "Manufacturing of micro-lens array using contactless micro-embossing with an EDM-mold," Applied Sciences, vol. 9, no. 1, p. 85, 2018. [46] S. Moore, J. Gomez, D. Lek, B. H. You, N. Kim, and I.-H. Song, "Experimental study of polymer microlens fabrication using partial-filling hot embossing technique," Microelectronic Engineering, vol. 162, pp. 57-62, 2016, doi: 10.1016/j.mee.2016.05.009. [47] C. Lim, M. Hong, A. S. Kumar, M. Rahman, and X. Liu, "Fabrication of concave micro lens array using laser patterning and isotropic etching," International Journal of Machine Tools and Manufacture, vol. 46, no. 5, pp. 552-558, 2006. [48] H. Oh, G. Kim, H. Seo, Y. Song, K. Lee, and S. S. Yang, "Fabrication of micro lens array using quartz wet etching and polymer," Sensors and Actuators A: Physical, vol. 164, no. 1-2, pp. 161-167, 2010. [49] G. H. Baek, E. S. Hwang, and B.-H. Cheong, "Quasi-periodic micro-lens array via laser-assisted wet etching," AIP Advances, vol. 12, no. 10, p. 105219, 2022. [50] S. Hayashi, Y. Kumamoto, T. Suzuki, and T. Hirai, "Imaging by polystyrene latex particles," Journal of colloid and interface science, vol. 144, no. 2, pp. 538-547, 1991. [51] Y. Lu, Y. Yin, and Y. Xia, "A Self‐Assembly Approach to the Fabrication of Patterned, Two‐Dimensional Arrays of Microlenses of Organic Polymers, "Advanced materials, vol. 13, no. 1, pp. 34-37, 2001. [52] W.-K. Kuo, G.-F. Kuo, S.-Y. Lin, and H. H. Yu, "Fabrication and characterization of artificial miniaturized insect compound eyes for imaging," Bioinspiration & Biomimetics, vol. 10, no. 5, p. 056010, 2015. [53] X. Ye et al., "Monolayer Colloidal Crystals by Modified Air-Water Interface Self Assembly Approach," Nanomaterials (Basel), vol. 7, no. 10, Sep 25 2017, doi: 10.3390/nano7100291. [54] D. Bornside, C. Macosko, and L. Scriven, "MODELING OF SPIN COATING, "Journal of imaging technology, vol. 13, no. 4, pp. 122-130, 1987. [55] D. Grosso et al., "A first insight in the mechanisms involved in the self-assembly of 2D-hexagonal templated SiO2 and TiO2 mesostructured films during dip coating," Journal of sol-gel science and echnology, vol. 26, no. 1, pp. 561-565, 2003. [56] R. Xu, T. Zhou, and R. Cheung, "Fabrication of SiC concave microlens array mold based on microspheres self-assembly," Microelectronic Engineering, vol. 236, 2021, doi: 10.1016/j.mee.2020.111481. [57] S.-W. Tsai, P.-Y. Chen, and Y.-C. Lee, "Fabrication of a seamless roller mold with wavy microstructures using mask-less curved surface beam pen lithography," Journal of Micromechanics and Microengineering, vol. 24, no. 4, p. 045022, 2014. [58] J. H. Park, D. H. Yun, Y. W. Ma, C. Y. Gwak, G. Je, and B. S. Shin, "Laser interference lithography on non-planar surface for roll-to-roll process," in Laser based Micro-and Nanoprocessing XII, 2018, vol. 10520: SPIE, pp. 215-220. [59] Y. Xia and G. M. Whitesides, "Soft lithography," Angewandte Chemie International Edition, vol. 37, no. 5, pp. 550-575, 1998. [60] 朱明輝, "軟模低壓滾輪式轉印製程的研發與應用," 碩士, 國立台灣大學, 2007. [61] 莊岱融, "PDMS 環膜結合氣囊滾輪複製 UV 樹脂微奈米結構製程的之研發及應用," 碩士, 機械工程系, 國立台灣大學, 2010. [62] 李昀珩, "環形 PDMS 軟模結合氣囊滾輪複製 UV 樹脂連續陽極氧化鋁奈米結構製程研發," 2012. [Online]. Available: https://hdl.handle.net/11296/bfyvdu. [63] D. Meyerhofer, "Characteristics of resist films produced by spinning," Journal of Applied Physics, vol. 49, no. 7, pp. 3993-3997, 1978. [64] S. Shinde, S. Park, and J. Shin, "Spin synthesis of monolayer of SiO 2 thin films," Journal of Semiconductors, vol. 36, no. 4, pp. 043002-10, 2015. [65] T. Ogi, L. B. Modesto-Lopez, F. Iskandar, and K. Okuyama, "Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 297, no. 1-3, pp. 71-78, 2007. [66] S. Khanna et al., "Fabrication of long-ranged close-packed monolayer of silica nanospheres by spin coating," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 553, pp. 520-527, 2018. [67] P. Jiang, J. Bertone, K. S. Hwang, and V. Colvin, "Single-crystal colloidal multilayers of controlled thickness," Chemistry of Materials, vol. 11, no. 8, pp. 2132-2140, 1999. [68] L. Teh, N. Tan, C. Wong, and S. Li, "Growth imperfections in three-dimensional colloidal self-assembly," Applied Physics A, vol. 81, no. 7, pp. 1399-1404, 2005. [69] J.-M. Meijer et al., "Self-assembly of colloidal cubes via vertical deposition," Langmuir, vol. 28, no. 20, pp. 7631-7638, 2012. [70] Y. Suh, Q. Pham, B. Shao, and Y. Won, "The Control of Colloidal Grain Boundaries through Evaporative Vertical Self-Assembly," Small, vol. 15, no. 12, p. e1804523, Mar 2019, doi: 10.1002/smll.201804523. [71] C. Garcia Nunez, W. T. Navaraj, F. Liu, D. Shakthivel, and R. Dahiya, "Large Area Self-Assembly of Silica Microspheres/Nanospheres by Temperature Assisted Dip-Coating," ACS Appl Mater Interfaces, vol. 10, no. 3, pp. 3058-3068, Jan 24 2018, doi: 10.1021/acsami.7b15178. [72] colloidal-particles-at-liquid-interfaces, B. P. Binks, ed.: Cambridge University Press, 2006. Accessed on: October 2009. [73] O. N. Oliveira Jr, L. Caseli, and K. Ariga, "The past and the future of Langmuir and Langmuir–Blodgett films," Chemical Reviews, vol. 122, no. 6, pp. 6459-6513, 2022. [74] A. Pockels, "Surface tension," Nature, vol. 43, no. 1115, pp. 437-439, 1891. [75] N. P. E. S. by Bacterial, "THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. II. LIQUIDS," J. Am. Chem. Soc, vol. 39, no. 9, pp. 1848-1906, 1917. [76] K. B. Blodgett, "Use of interference to extinguish reflection of light from glass," Physical Review, vol. 55, no. 4, p. 391, 1939. [77] J. Rybczynski, U. Ebels, and M. Giersig, "Large-scale, 2D arrays of magnetic nanoparticles," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 219, no. 1-3, pp. 1-6, 2003. [78] D. Nagao, R. Kameyama, H. Matsumoto, Y. Kobayashi, and M. Konno, "Single and multi-layered patterns of polystyrene and silica particles assembled with a simple dip-coating," Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 317, no. 1-3, pp. 722-729, 2008. [79] Y. Wu et al., "Fabrication of wafer-size monolayer close-packed colloidal crystals via slope self-assembly and thermal treatment," Langmuir, vol. 29, no. 46, pp. 14017-14023, 2013. [80] S. Jeong, L. Hu, H. R. Lee, E. Garnett, J. W. Choi, and Y. Cui, "Fast and scalable printing of large area monolayer nanoparticles for nanotexturing applications," Nano letters, vol. 10, no. 8, pp. 2989-2994, 2010. [81] M. Colburn et al., "Step and flash imprint lithography: a new approach to high resolution patterning," in Emerging Lithographic Technologies III, 1999, vol. 3676: SPIE, pp. 379-389. [82] H. Lee, S. Hong, K. Yang, and K. Choi, "Fabrication of 100 nm metal lines on flexible plastic substrate using ultraviolet curing nanoimprint lithography," Applied physics letters, vol. 88, no. 14, p. 143112, 2006. [83] S. Park, K. Choi, G. Kim, and J. Lee, "Nanoscale patterning with the double-layered soft cylindrical stamps by means of UV-nanoimprint lithography," Microelectronic Engineering, vol. 86, no. 4-6, pp. 604-607, 2009. [84] S. H. Ahn and L. J. Guo, "High‐speed roll‐to‐roll nanoimprint lithography on flexible plastic substrates," Advanced materials, vol. 20, no. 11, pp. 2044-2049, 2008. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/90618 | - |
dc.description.abstract | 微透鏡陣列廣泛應用於具有成像需求的光學、生醫和檢測領域。為了降低微透鏡陣列的生產成本,學界一直在探索各種製作方式。目前普遍採用的方法是微壓印製程,能夠有效地在聚合物薄膜上複製大面積結構。然而,在微壓印製程中,滾筒模具的製作是一個具有挑戰性的核心問題,因為微結構位於曲面,使雷射等直接製作的方式變得更加困難;使用模具包覆方式也會產生接縫,導致壓印時轉
印出不可避免的缺陷。 本篇研究用複製玻璃管壁自組裝微米球製作無接縫透鏡模具:首先,使用浸潤塗佈調整活性劑濃度、管壁溫度、液面降速等參數,將直徑 5 微米的球體堆積於玻璃管內壁上,形成環形自組裝薄膜。接著,將直徑稍小的水溶性 PVA 圓柱體固定在玻璃管中央,PVA 圓柱與烘乾之自組裝微米球玻璃圓管內壁,形成一環型空隙,澆鑄 PDMS 後,即可製作無接縫之環形微透鏡陣列模具。 本研究也設計製作 UV 光固化滾壓機台,使用所製作的模具,進行微透鏡陣列的滾壓翻印。在 PET 膜上塗上 UV 膠,在滾壓中與模具完全接觸後,用紫外光固化。調整紫外光的光照能量,以及轉速的控制,成功的滾壓製作微透鏡陣列。於光學儀器量測下證實能有效的成像。 | zh_TW |
dc.description.abstract | Micro lens arrays are widely used in optical, biomedical, and inspection fields. Various fabrication methods have been explored to reduce their production cost. The commonly used method is micro imprinting, which replicates large-area structures on polymer films. However, fabricating roller molds is challenging due to the curved surfaces of the microstructures. Using mold coating methods also introduces seams and defects during imprinting.
In this study, a seamless micro-lens mold was fabricated using self-assembled microspheres on the replicated glass tube wall. Firstly, the parameters of immersion coating, such as surfactant concentration, wall temperature, and liquid surface descent rate, were adjusted to deposit 5-micrometer diameter spheres onto the inner wall of the glass tube, forming a ring-shaped self-assembled thin film. Next, a slightly smaller diameter water-soluble PVA cylinder was fixed at the center of the glass tube, creating a ring-shaped gap between the PVA cylinder and the dried self-assembled microspheres on the glass tube inner wall. The PDMS was poured and cured in a seamless ring-shaped micro-lens array mold. UV-cured roller imprinting was performed on the micro-lens array using a substrate-covered mold. The UV light exposure energy was tested, and successful replication of the micro lens array was achieved by adjusting the rotation speed. The replicated array showed effective imaging as measured by optical instruments. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-10-03T16:53:06Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-10-03T16:53:06Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 摘要 i
ABSTRACT iii 目錄 iv 圖目錄 vii 表目錄 xii 1. 第一章 導論 1 1.1 前言 1 1.2 微透鏡陣列應用 3 1.3 熱壓印技術 4 1.4 奈米壓印光刻技術 5 1.5 滾筒壓印技術 6 1.6 微球堆積微結構製作 8 1.7 研究動機與目的 9 1.8 論文內容及架構 10 2. 第二章 文獻回顧 11 2.1 微透鏡陣列成型技術 11 2.1.1 熱回流成型 11 2.1.2 噴墨成型 13 2.1.3 熱壓部分填充成型 15 2.1.4 等向性蝕刻模具成型 16 2.1.5 微奈米球自組裝模具成型 18 2.2 無縫微結構滾筒模具製作 21 2.2.1 非傳統透鏡成型加工 21 2.2.2 環形 PDMS 鑄造 23 2.3 微球自組裝技術 26 2.3.1 自組裝原理 26 2.3.2 旋轉塗佈法 26 2.3.3 垂直沉積法 29 2.3.4 浸潤塗佈法 32 2.3.5 線棒塗佈法 36 2.4 光固化成型 38 2.5 文獻回顧總結 41 3. 第三章 微透鏡陣列無縫滾筒模具製作 42 3.1 研究流程規劃 42 3.2 實驗材料 44 3.2.1 微米球挑選 44 3.2.2 表面活性劑 44 3.2.3 PDMS 46 3.2.4 光固化樹脂 46 3.2.5 紫外光源 47 3.3 模具製作流程 48 3.3.1 堆積槽 48 3.3.2 基板前處理 49 3.3.3 浸潤塗佈自組裝 51 3.3.4 PDMS 結構翻印 53 3.4 滾壓機構架設 54 3.4.1 基材包覆固化 56 3.4.2 主動輪設計 56 3.5 量測方法 57 3.5.1 光學顯微鏡 57 3.5.2 雷射共軛焦顯微鏡 57 3.5.3 ImageJ 影像處理軟體 58 3.5.4 UV 能量計 60 4. 第四章 浸潤塗佈法自組裝堆積 61 4.1 實驗設置與流程 61 4.2 堆積槽架設 64 4.2.1 流速控制測試 64 4.2.2 堆積槽設計 65 4.3 堆積成型成型視窗 67 4.3.1 堆積溫度影響 68 4.3.2 堆積速度影響 71 4.3.3 表面活性劑濃度影響 73 4.4 自組裝堆積結論 77 5. 第五章 微米球模具製造與成型驗證 79 5.1 模具製作 79 5.2 滾壓機台架設 82 5.2.1 紫外光強度測試 84 5.2.2 滾壓參數控制 85 5.3 實際成型結果 87 6. 第六章 研究總結與未來展望 91 6.1 研究總結 91 6.2 未來展望 92 參考資料 93 附錄 100 7. 微米球無縫模具優化實驗 100 7.1 模具優化測試 100 7.1.1 模具優化方法 100 7.1.2 實際實驗結果 103 | - |
dc.language.iso | zh_TW | - |
dc.title | 微米球自組裝技術製作無縫圓柱模具及其在滾壓微透鏡陣列的應用 | zh_TW |
dc.title | Development of Seamless Cylindrical Mold using Microsphere Self-assembly for Continuous UV Roller Imprinting of Micro-lens Array | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 張致遠;沈永康;粘世智 | zh_TW |
dc.contributor.oralexamcommittee | Chih-Yuan Chang;Yung-Kang Shen;Shih-Zhih Nian | en |
dc.subject.keyword | 微透鏡陣列,微壓印製程,滾筒模具製作,浸潤塗佈法,無接縫模具,微米球自組裝技術,UV 光固化,透鏡成像, | zh_TW |
dc.subject.keyword | Micro-lens array,micro imprinting,roller mold fabrication,dip coating method,seamless mold,microsphere self-assembly,UV curing,lens imaging, | en |
dc.relation.page | 105 | - |
dc.identifier.doi | 10.6342/NTU202302613 | - |
dc.rights.note | 同意授權(限校園內公開) | - |
dc.date.accepted | 2023-08-08 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 機械工程學系 | - |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf 目前未授權公開取用 | 8.66 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。