請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/89978
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 蔡明哲 | zh_TW |
dc.contributor.advisor | Ming-Jer Tsai | en |
dc.contributor.author | 楊欣諭 | zh_TW |
dc.contributor.author | Hsin-Yu Yang | en |
dc.date.accessioned | 2023-09-22T16:55:01Z | - |
dc.date.available | 2023-11-09 | - |
dc.date.copyright | 2023-09-22 | - |
dc.date.issued | 2023 | - |
dc.date.submitted | 2023-08-09 | - |
dc.identifier.citation | 中華民國國家標準 CNS 2215(2017)粒片板。經濟部標準檢驗局。
中華民國國家標準 CNS 4713(2021)木材中乙醇甲苯萃取物試驗法。經濟部標準檢驗局。 中華民國國家標準 CNS 14907(2018)木材中酸不溶性木質素試驗法。經濟部標準檢驗局。 黃夢雪、張文標、張曉春、李文珠、余文軍、張宏、沈德長 (2015)。竹材軟化展平研究及其進展。竹子研究匯刊34(1),31–36。 呂錦明(2010)。台灣竹圖鑑。臺中市:晨星。 南投縣政府文化局(2022)竹藝博物館-竹材應用。取自南投縣政府文化局網址https://www.nthcc.gov.tw/B3_3/content/1709 唐讓雷(1990)。竹材之強度性質。載於王松永(主編),竹材綜合利用與加工(頁51-64)。宜蘭縣:中華民國林產事業協會。 吳建全(2016)。水熱—漆酶預處理及木質素自膠合機理研究。取自北京林業大學網址https://cdmd.cnki.com.cn/Article/CDMD-10022-1016137613.htm 吳順昭、謝榮生(1990)。台灣新引種竹材構造變異之研究。載於王松永(主編),竹材綜合利用與加工(頁15-38)。宜蘭縣:中華民國林產事業協會。 謝榮生(1985)。台灣產竹材超微構造之研究(碩士論文)。國立台灣大學,臺北市。 謝榮生、吳順昭、王秀華(1990)。單稈竹與叢生竹之組織構造研究。載於王松永(主編),竹材綜合利用與加工(頁15-38)。宜蘭縣:中華民國林產事業協會。 行政院農業委員會(2022)。農業主題館林展利用-認識竹子。取自行政院農業委員會,農業部林業試驗所網址:https://kmweb.moa.gov.tw/subject/subject.php?id=46959 Amada, S., Tamotsu, M., Nagase, Y., Ichikawa, Y., Kirigai, A., & Yang, Z. (1995). The Mechanical Structure of Bamboos in Viewpoint of Functionally Gradient and Composite Materials. Journal of Composite Materials, 30, 800–819. Back, E. L., & Salmen, N. L. (1982). Glass transitions of wood components hold implications for molding and pulping processes. Tappi Journal, 65(7), 107–110. Habibi, M. K., Samaei, A. T., Gheshlaghi, B., Lu, J., & Lu, Y. (2015). Asymmetric flexural behavior from bamboo’s functionally graded hierarchical structure: Underlying mechanisms. Acta Biomaterialia, 16, 178–186. Xu, H., Li, J., Ma, X.X., Yi, W.K., & Wang, H.K. (2021). Intelligent analysis technology of bamboo structure. Part II: The variability of radial distribution of fiber volume fraction. Industrual Crops & Products, 174(114164). doi:10.1016/j.indcrop.2021.114164 Li, D., Wu, J.Q., Peng, W.X., Xiao, W.F., Wu, J.G., Zhuo, J.Y., Yuan, T.Q., & Sun, R.C. (2015). Effect of Lignin on Bamboo Biomass Self-Bonding During Hot-Pressing: Lignin Structure and Characterization. BioResources, 10(4), 6769–6782. Lian, C. P., Liu, R., Zhang, S. Q., Yuan, J., Luo, J. J., Yang, F., & Fei, B. H. (2020). Ultrastructure of parenchyma cell wall in bamboo (Phyllostachys edulis) culms. Cellulose, 27, 7321–7329. doi:10.1007/s10570-020-03265-9 Louis E. Wise, Edwin C. Jahn, & F. E. Brauns. (1952). Wood Chemistry (2nd ed.). New York, NY: Reinhold Publishing Corporation. Tajuddin, M., Ahmad, Z., & Ismail, H. (2016). A Review of Natural Fibers and Processing Operations for the Production of Binderless Boards. BioResources, 11(2), 5600–5617. Maria Fernanda N. dos Santos, Rosane Ap. G. Battistelle, Barbara Stolte Bezerra, & Humberto S.A. Varum. (2014). Comparative study of the life cycle assessment of particleboards made of residues from sugarcane. 64, 345–355. doi:10.1016/j.jclepro.2013.06.039 Lobobikov, M., Paudel, S., Piazza, M., Ren, H., & Wu, J. (2007). World bamboo resources. Rome, Italy: Food and Agriculture Organization of the United Nations Pizzi, A., Papadopoulos, A. N., & Policardi, F. (2020). Wood Composites and Their Polymer Binders. Polymers, 12(5), 1115. doi:10.3390/polym12051115 Qiao, P. (2013). Developments in Fiber-reinforced Polymer (FRP) Composites for Civil Engineering. Sawston. England: Woodhead Publishing. Ricardo Gabriel de Almeida Mesquita, José Manoel Marconcini, Anand Ramesh Sanadi, Antônia Amanda da Silva César, Gustavo Henrique Denzin Tonoli, Thomas Mark Venås, & Lourival Marin Mendes. (2016). Coir and Sisal Fibers as Fillers in the Production of Eucalyptus Medium Density Particleboards—MDP. Materials Research, 19. doi: 10.1590/1980-5373-MR-2016-0361 Gibson, R. F. (2007). Principles of Composite Material Mechanics (second edition). New York, NY: CRC Press. Crawford, R. J., & Throne, J. L. (2002). Rotational Molding Polymers. Rotational Molding Technology (19–68). Saito, Y., Ishii, M., & Sato, M. (2013). The suitable harvesting season and the part of moso bamboo (Phyllostachys pubescens) for producing binderless boards. Wood Science and Technology, 47(5), 1071–1081. doi:10.1007/s00226-013-0560-9 Shao, Z.P., Fang, C.H., Huang, S.X., & Tian, G.L. (2010). Tensile properties of Moso bamboo (Phyllostachys pubescens) and its components with respect to its fiber-reinforced composite structure. Wood Science and Technology, 44(4), 655–666. Tan, T., Rahbar, N., Allameh, S. M., Kwofie, S., Dissmore, D., Ghavami, K., & Soboyejo, W. O. (2011). Mechanical properties of functionally graded hierarchical bamboo structures. Acta Biomaterialia, 7(10), 3796–3803. Wang, B., Li, D.L., Chen, T.Y., Qin, Z.Y., Peng, W.X., & Wen, J.L. (2016). Understanding the Mechanism of Self-Bonding of Bamboo Binderless Boards: Investigating the Structural Changes of Lignin Macromolecule during the Molding Pressing Process. BioResources, 12(1), 514–532. Wei, X., Zhou, H., Chen, F., & Wang, G. (2019). Bending Flexibility of Moso Bamboo (Phyllostachys Edulis) with Functionally Graded Structure. Materials,12(2007). doi: 10.3390/ma12122007. Widyorini, R., Yudha, A. P., & Prayitno, T. A. (2011). Some of the Properties of Binderless Particleboard Manufactured from Bamboo. Wood Research Journal, 2(2), 89-93. Yusuf Akinbade, Kent A. Harries, Chelsea V. Flower, Ian Nettleship, Christopher Papadopoulos, & Shawn Platt. (2019). Through-culm wall mechanical behaviour of bamboo. Construction and Building Materials 216, 485–495. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/89978 | - |
dc.description.abstract | 竹材具有纖維體積分數隨縱向及徑向漸進變化之特性,竹子之各項強度、組織及化學組成與此梯度功能特性密切相關,斷面影像分析為測量竹材纖維體積分數的方法之一。自膠合技術因利用材料本身既有的木質素作為天然膠合劑無須另外添加,近年來愈發受到關注,然而目前尚未有竹材纖維體積分數對竹粒片自膠合板製程與性質之相關探討,故本試驗以三年生孟宗竹為材料,分部位記錄其纖維體積分數,並比較對應的自膠合板基礎性質及化學組成。為了解熱壓後之粒片型態,拍攝電子顯微鏡影像,觀察取自不同纖維體積分數之竹材部位的粒片,比較其型態差異。結果顯示,竹基部外側具有最高纖維體積分數39%,竹梢次之為35%,竹中為31%,竹基部內側具最低纖維體積分數19%。觀測板芯溫度經時變化結果發現,180oC,二階段式熱壓,最大壓力3MPa,30分鐘板芯溫度約達175oC。內聚強度結果顯示,竹基部內側自膠合板具最佳強度0.272MPa,為四者中最良好之膠合品質,其餘三者內聚強度不具顯著差異。主成分定量結果顯示,竹基部外側粒片具最高木質素含量27.5%,竹梢與竹中同為26.9%,竹基部內側之木質素含量最低25.5%。木質素含量與纖維體積分數具有相同趨勢,隨著纖維占比提升,木質素含量隨之上升,兩者具顯著相關。熱壓後所有部位之全纖維素比例皆因高溫造成半纖維素降解而下降。壓縮比對缺乏膠合劑固化的自膠合板之膠合效果影響甚鉅。電子顯微鏡拍攝自膠合板板面與板芯狀態結果顯示,由於竹自膠合粒片型態為針狀且長度分布跨度較大,導致板面粒徑較大孔隙較多,板芯粒片則較為緻密。竹基部內側粒片的自膠合板其板材粒片具有明顯壓潰,另外三者則粒片形狀較為立體且完整。180oC,3MPa之熱壓條件對竹基部內側竹粒片具較好的自膠合效果。取自較高纖維體積分數部位之粒片,需要較高溫高壓之熱壓條件方可達到足夠的自膠合效果。 | zh_TW |
dc.description.abstract | Bamboo exhibits a characteristic of gradual variation in fiber volume fraction along both longitudinal and radial directions. The strengths, structure, and chemical composition are related to this gradient functional feature. Image analysis of cross section is one of the methods used for measuring the fiber volume fraction of bamboo. Self-bonding technology, which utilizes the inherent lignin of the material as a natural adhesive without the need for additional additives, has gained increasing attention in recent years. However, there has been limited investigation into the correlation between the fiber volume fraction of bamboo and the process and properties of bamboo particle self-bonding boards. Therefore, in this study, three-year-old Moso bamboo was used as the material. The fiber volume fractions were recorded for different sections of the bamboo, and the corresponding basic properties and chemical composition of the self-bonding boards were compared. To understand the particle morphology after hot pressing, electron microscope images were taken to observe the particles from bamboo sections with different fiber volume fractions, and their morphological differences were compared. The experimental results reveal that the outer part of the bamboo base has the highest fiber volume fraction at 39%, followed by 35% in the bamboo tip, 31% in the middle portion, and the inner side of the bamboo base has the lowest fiber volume fraction at 19%. Observation of the temporal evolution of the core temperature during the two-stage hot-press process at 180°C with a maximum pressure of 3 MPa for 30 minutes indicates that the core temperature reaches approximately 175°C. Regarding the internal bond strength, the bamboo self-bonding board from the inner side of the bamboo base exhibits the optimal strength of 0.272 MPa, showcasing the highest adhesive quality among the four samples. The internal bond strengths of the other three samples do not exhibit significant differences. Quantitative analysis of the main components reveals that the bamboo particles from the outer part of the bamboo base have the highest lignin content of 27.5%, while both the bamboo tip and middle part possess 26.9% lignin content. The inner side of the bamboo base has the lowest lignin content at 25.5%. Lignin content follows a similar trend as the fiber volume fraction, with an increase in fiber proportion leading to higher lignin content. The two variables are significantly correlated. Post hot-pressing, the cellulose content of all sections decreased due to the degradation of hemicellulose caused by the high temperature. The compression ratio significantly affects the bonding effectiveness of self-bonding boards lacking adhesive curing. Electron microscope images of the surface and core of the self-bonding boards revealed that the needle-like and widely distributed morphology of bamboo self-bonding particles results in larger pores and more voids on the surface, while the core particles are denser. The self-bonding board from the inner side of the bamboo base exhibited evident particle collapse, whereas the other three showed more three-dimensional and intact particle shapes. Under the conditions of 180°C and 3 MPa, the self-bonding effect on bamboo particles from the inner side of the bamboo base was notably favorable. Particles from sections with higher fiber volume fractions require higher temperature and pressure during hot-pressing to achieve sufficient self-bonding effects. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-09-22T16:55:00Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-09-22T16:55:01Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 誌謝 i
摘要 ii Summary iii 目錄 v 圖目次 vii 表目次 ix 第一章 前言 1 第二章 文獻回顧 2 一、孟宗竹簡介 2 (一)台灣現有竹材 2 (二)竹材特性 3 (三)孟宗竹解剖構造 6 (四)纖維體積分數 7 二、粒片板概述 7 三、自膠合概述 9 (一)木質素重組 9 (二)玻璃轉移溫度 10 (三)熱壓時間與溫度 13 第三章 材料與方法 15 一、試驗材料 15 二、纖維體積分數試驗 19 (一)試材製備 19 (二)斷面影像拍攝 19 (三)影像分析 19 (四)纖維體積分數計算 19 三、自膠合熱壓 24 (一)竹材破碎流程與篩分 24 (二)熱壓設備與條件 26 四、粒片板性質檢測 29 (一)密度 29 (二)含水率 29 (三)壓縮比 29 (四)抗彎性質 30 (五)內聚強度 31 五、主成分分析 32 (一)全纖維素定量 32 (二)木質素定量 33 六、纖維型態觀察 34 第四章 結果與討論 35 一、纖維體積分數 35 二、熱壓經時溫度變化 35 三、自膠合粒片板基礎性質 38 (一)板材抗彎性質與內聚強度 39 (二)木質素含量比較 41 (三)全纖維素含量比較 43 四、電子顯微鏡觀察纖維型態 47 第五章 結論 52 參考文獻 53 附錄 58 | - |
dc.language.iso | zh_TW | - |
dc.title | 纖維體積分數對孟宗竹自膠合粒片板製程與機械性質影響 | zh_TW |
dc.title | Effects of fiber fraction on mechanical properties and processing of self-bonding Phyllostachys edulis particleboards | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 楊德新;柯淳涵 | zh_TW |
dc.contributor.oralexamcommittee | Te-Hsin Yang;Chun-Han Ko | en |
dc.subject.keyword | 自膠合,孟宗竹,粒片板,纖維體積分數,熱壓, | zh_TW |
dc.subject.keyword | Self-bonding,Moso bamboo,Particle board,Fiber volume fraction,Hot Press, | en |
dc.relation.page | 63 | - |
dc.identifier.doi | 10.6342/NTU202303465 | - |
dc.rights.note | 未授權 | - |
dc.date.accepted | 2023-08-11 | - |
dc.contributor.author-college | 生物資源暨農學院 | - |
dc.contributor.author-dept | 森林環境暨資源學系 | - |
顯示於系所單位: | 森林環境暨資源學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf 目前未授權公開取用 | 6.84 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。