請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/87608
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 王建凱 | zh_TW |
dc.contributor.advisor | Chien-Kai Wang | en |
dc.contributor.author | 林柏廷 | zh_TW |
dc.contributor.author | Po-Ting Lin | en |
dc.date.accessioned | 2023-06-20T16:20:26Z | - |
dc.date.available | 2023-11-09 | - |
dc.date.copyright | 2023-06-20 | - |
dc.date.issued | 2023 | - |
dc.date.submitted | 2023-02-03 | - |
dc.identifier.citation | S. J. Kline, "The purposes of uncertainty analysis," Journal of Fluids Engineering, vol. 107, no. 2, pp. 153-160, 1985.
E. M. Purcell, "Life at low Reynolds number," American journal of physics, vol. 45, no. 1, pp. 3-11, 1977. M. Garcia, S. Berti, P. Peyla, and S. Rafaï, "Random walk of a swimmer in a low-Reynolds-number medium," Physical Review E, vol. 83, no. 3, p. 035301, 2011. N. Hill and M. Bees, "Taylor dispersion of gyrotactic swimming micro-organisms in a linear flow," Physics of Fluids, vol. 14, no. 8, pp. 2598-2605, 2002. J. K. Oh, R. Drumright, D. J. Siegwart, and K. Matyjaszewski, "The development of microgels/nanogels for drug delivery applications," Progress in polymer science, vol. 33, no. 4, pp. 448-477, 2008. Y. Qiu and K. Park, "Environment-sensitive hydrogels for drug delivery," Advanced drug delivery reviews, vol. 53, no. 3, pp. 321-339, 2001. F. Yang et al., "A 3D human adipose tissue model within a microfluidic device," Lab on a Chip, vol. 21, no. 2, pp. 435-446, 2021. R. W. Walters and L. Huyse, "Uncertainty analysis for fluid mechanics with applications," 2002. D. C. H. J. M. Hammersley, Monte Carlo Methods. Springer Dordrecht, 1964. H. N. Najm, "Uncertainty quantification and polynomial chaos techniques in computational fluid dynamics," Annual review of fluid mechanics, vol. 41, pp. 35-52, 2009. Q.-Y. Chen, D. Gottlieb, and J. S. Hesthaven, "Uncertainty analysis for the steady-state flows in a dual throat nozzle," Journal of Computational Physics, vol. 204, no. 1, pp. 378-398, 2005. U. B. Mehta, "Some Aspects of Uncertainty in Computational Fluid Dynamics Results," Journal of Fluids Engineering, vol. 113, no. 4, pp. 538-543, 1991, doi: 10.1115/1.2926512. M. Kasperski and H.-J. Niemann, "The LRC (load-response-correlation)-method a general method of estimating unfavourable wind load distributions for linear and non-linear structural behaviour," Journal of Wind Engineering and Industrial Aerodynamics, vol. 43, no. 1-3, pp. 1753-1763, 1992. C.-K. Wang and P.-L. Ko, "Robust topology optimization of solid continua for peak response serviceability to uncertain quasi-static loads with temporal correlation," Structural and Multidisciplinary Optimization, vol. 60, no. 2, pp. 443-460, 2019. C.-K. Wang, C.-M. Tsai, B.-S. Chuang, and Y.-L. Lo, "Structural optimization with design constraints on peak responses to temporally correlated quasi-static load processes," Structural and Multidisciplinary Optimization, vol. 59, no. 2, pp. 521-538, 2019. J. G. Santiago, S. T. Wereley, C. D. Meinhart, D. Beebe, and R. J. Adrian, "A particle image velocimetry system for microfluidics," Experiments in fluids, vol. 25, no. 4, pp. 316-319, 1998. A. Schröder and C. E. Willert, "Particle image velocimetry: new developments and recent applications," 2008. D. P. Hart, "PIV error correction," Experiments in Fluids, vol. 29, no. 1, pp. 13-22, 2000/07/01 2000, doi: 10.1007/s003480050421. J. J. Gillissen, R. Bouffanais, and D. K. Yue, "Data assimilation method to de-noise and de-filter particle image velocimetry data," Journal of Fluid Mechanics, vol. 877, pp. 196-213, 2019. M. Raiola, S. Discetti, and A. Ianiro, "On the suppression of PIV measurement noise with a POD based filter," in 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 2014. J.-D. Tian and H.-H. Qiu, "Eliminating background noise effect in micro-resolution particle image velocimetry," Applied optics, vol. 41, no. 32, pp. 6849-6857, 2002. B. Wieneke, "PIV anisotropic denoising using uncertainty quantification," Experiments in Fluids, vol. 58, no. 8, pp. 1-10, 2017. L. Wang and M. Yu, "A p-multigrid flux reconstruction method for the steady Navier-Stokes equations," in AIAA Aviation 2019 Forum, 2019, p. 3061. H. B. Chew, S. Hong, and K.-S. Kim, "Cohesive zone laws for void growth—II. Numerical field projection of elasto-plastic fracture processes with vapor pressure," Journal of the Mechanics and Physics of Solids, vol. 57, no. 8, pp. 1374-1390, 2009. S. Hong, H. B. Chew, and K.-S. Kim, "Cohesive-zone laws for void growth—I. Experimental field projection of crack-tip crazing in glassy polymers," Journal of the Mechanics and Physics of Solids, vol. 57, no. 8, pp. 1357-1373, 2009. K. Kamrin and J.-C. Nave, "An Eulerian approach to the simulation of deformable solids: Application to finite-strain elasticity," arXiv preprint arXiv:0901.3799, 2009. C. I. Trombley and M. L. Ekiel-Jeżewska, "Basic Concepts of Stokes Flows," in Flowing Matter, F. Toschi and M. Sega Eds. Cham: Springer International Publishing, 2019, pp. 35-50. R. L. Sani, P. Gresho, R. L. Lee, D. Grifftths, and M. Engelman, "The cause and cure (!) of the spurious pressures generated by certain fem solutions of the incompressible Navier‐Stokes equations: Part 2," International Journal for Numerical Methods in Fluids, vol. 1, no. 2, pp. 171-204, 1981. R. L. Sani, P. M. Gresho, R. L. Lee, and D. F. Griffiths, "The cause and cure (?) of the spurious pressures generated by certain FEM solutions of the incompressible Navier‐Stokes equations: Part 1," International Journal for Numerical Methods in Fluids, vol. 1, no. 1, pp. 17-43, 1981. "Flow of a Uniform Incompressible Viscous Fluid," in An Introduction to Fluid Dynamics, G. K. Batchelor Ed., (Cambridge Mathematical Library. Cambridge: Cambridge University Press, 2000, pp. 174-263. J. N. Reddy and D. K. Gartling, The finite element method in heat transfer and fluid dynamics. CRC press, 2010. d. kopeliovich. "Gear oil SAE 80W-90" https://libraryguides.vu.edu.au/ieeereferencing/webbaseddocument (accessed Jan. 30, 2023). C. L. Chan, C. Anitescu, Y. Zhang, and T. Rabczuk, "Two and three dimensional image registration based on B-spline composition and level sets," Communications in Computational Physics, vol. 21, no. 2, pp. 600-622, 2017. 盧中仁, "連體力學導論,"課程講義 (機械工程學研究所, 臺灣大學,). 2021. C. H. Rycroft, C.-H. Wu, Y. Yu, and K. Kamrin, "Reference map technique for incompressible fluid–structure interaction," Journal of Fluid Mechanics, vol. 898, 2020. K. Kamrin, C. H. Rycroft, and J.-C. Nave, "Reference map technique for finite-strain elasticity and fluid–solid interaction," Journal of the Mechanics and Physics of Solids, vol. 60, no. 11, pp. 1952-1969, 2012. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/87608 | - |
dc.description.abstract | 本論文進行連體力學研究,係針對不可壓縮斯托克斯流,提出新式場域極值反應之解析方法,和場域量測數據之降噪技術。關於極值反應解析方法,本論文基於高斯分佈統計函數描述隨機邊界條件,並結合有限元素理論推導,發展出一分析理論,可以直接且準確評估出受隨機邊界條件刺激之斯托克斯流場域極值速度與壓力場反應。為完整驗證此方法之解析能力,本論文針對不同的不確定性邊界條件,將重複執行計算流體力學所得結果之統計資料,與由本研究提出直接解析方法所得結果進行比較,除得到良好的一致性外,並進而呈現此新式分析理論之準確性;關於量測數據降噪技術,本論文結合有限元素法與拉格朗日乘數法,開發出一計算方法,將流體速度與壓力場量測數據進行降噪,且融合影像校準技術,設計一系列計算例,測試對於不同程度量測不確定性之場域降噪能力。
論文內容方面:第一章回顧斯托克斯流、場域極值反應求解方法、量測場域數據降噪技術的發展背景與相關重要研究文獻;第二章以伽遼金有限元素法(Galerkin finite element method)架構詳細推導斯托克斯流之有限元素法線性代數式,以數值解析出場域中各自由度的速度與壓力分佈;第三章提出本研究新開發流場極值反應解析之直接有限元素求解技術,推導出不可壓縮斯托克斯流在隨機刺激下之極端響應,並針對狄利克雷與諾伊曼邊界條件之不確定性,進行一系列之計算例;第四章,提出本研究新開發之不可壓縮斯托克斯流場域降噪技術,本技術主要融合有限元素理論與拉格朗日乘數法,並利用影像校準技術與參考映射技術等應用數學方法進行實作;第五章為本論文研究之結論與未來展望。 | zh_TW |
dc.description.abstract | This thesis research investigates continuum mechanics on incompressible Stokes flow. This thesis proposes a novel method to analyze extreme field responses accurately and a new technique to effectively reduce the noise in measurement field data. The extreme response method combines the concepts of uncertain boundary conditions, based on the statistical model of Laplace-Gaussian distributions, with the finite element theory. By these concepts, this analytical method can directly and accurately evaluate the extreme velocity field and pressure field responses of the Stokes flow under random boundary conditions. To investigate and validate the capabilities of the proposed analytical method under different uncertain boundary conditions, the extreme responses of Stokes flow through numerous conventional computational fluid mechanics simulations are compared with the ones from the proposed method in this study. The extreme flow data obtained by repetitive simulations are in good agreement with the direct evaluation. And the accuracy of the proposed technique is thus verified. Regarding the noise reduction technique, it combines the finite element method with the Lagrange multiplier method and can reduce measurement fluid velocity and pressure field data. This thesis utilizes the image registration technique to design a series of example and test the noise reduction capability with different degrees of measurement uncertainty.
The thesis is organized as follows. The research background and core concepts of Stokes flow, extreme responses analysis, and measurement noise reduction are thoroughly reviewed in Chapter 1. Chapter 2 introduces the essential concepts of the Galerkin finite element method exploiting Stokes flow mechanics and analyzes the velocity and pressure distribution over degrees of freedom on model meshes numerically. Chapter 3 presents a new direct finite element method for analyzing the extreme response of the incompressible Stokes flow under uncertainty boundary conditions. A series of computational examples considering the uncertain Dirichlet and Neumann boundary conditions are conducted for validating this method. Chapter 4 presents the newly developed measurement noise reduction technique for incompressible Stokes flow fields, which mainly combines the finite element theory and Lagrange multiplier method. In addition, the image registration approach and the reference mapping technique are utilized to implement several typical examples. Chapter 5 wraps the conclusion and future work of the thesis. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-06-20T16:20:26Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-06-20T16:20:26Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 誌謝 i
摘要 iii Abstract iv 目錄 v 圖目錄 viii 表目錄 xiii 第一章 緒論 1 1.1 研究動機 1 1.2 研究背景 1 1.3 文獻回顧 3 1.3.1 負載響應關聯法 3 1.3.2 平衡平滑法 4 1.4 研究內容介紹 5 第二章 有限元素法 6 2.1 斯托克斯流之守恆方程式 6 2.2 斯托克斯流之元素定義 7 2.3 斯托克斯流之邊界條件 9 2.4 斯托克斯流之有限元素法平衡方程式推導 10 2.5 斯托克斯流之簡化版有限元素法平衡方程式推導 11 2.6 高斯積分 13 2.7 流體有限元素法之穴室流範例 14 2.8 流體有限元素法之管流範例 16 2.9 斯托克斯流壓力場拉普拉斯方程式 17 2.10 黏滯係數對於斯托克斯流的影響 18 2.10.1 黏滯係數對於速度場驅動之斯托克斯流影響 19 2.10.2 黏滯係數對於壓力場驅動之斯托克斯流影響 19 第三章 斯托克斯流場域極值反應解析方法 26 3.1 系統之不確定性 26 3.2 流體負載響應關聯法(Fluid Load-Response-Correlation) 26 3.3 統計特徵公式 27 3.4 流體負載響應關聯法理論推導 27 3.5 以諾伊曼邊界條件定義之系統負載統計資訊 30 3.6 以狄利克雷邊界條件定義之系統負載統計資訊 32 3.7 統計特徵公式之隨機變數線性組合 33 3.8 複合式邊界條件之系統負載統計資訊 34 3.8.1 複合式邊界條件之負載響應關聯法理論驗證: 36 3.9 流體負載響應關聯法:數值計算例題 38 3.9.1 穴室流(Lid-driven cavity flow) 40 3.9.2 交錯流(Cross flow) 47 3.9.3 漸縮漸擴管(Converging-Diverging nozzle) 55 3.9.4 微流道混合器(Microfluidic mixer) 62 3.9.5 微流道活塞(Microfluidic piston) 71 3.9.6 微流道培養室(Microfluidic chamber) 83 3.9.7 微流道濃度梯度產生器(Concentration gradient generator) 91 第四章 斯托克斯流場域降噪技術 99 4.1 不可壓縮斯托克斯流場域降噪技術理論推導 99 4.2 降噪效果評斷指標 103 4.3 降噪技術之穴室流範例 103 4.4 壓力場拉普拉斯方程式 108 4.4.1 壓力場拉普拉斯方程式範例 109 4.5 降噪技術之庫埃特流範例 110 4.5.1 庫埃特流介紹 110 4.5.2 影像校準技術CDMFFD Image Registration 111 4.5.3 參考映射技術 111 4.5.4 庫埃特流速度場降噪過程 113 第五章 結論與未來展望 117 5.1 結論 117 5.2 未來展望 117 參考文獻 118 | - |
dc.language.iso | zh_TW | - |
dc.title | 考慮不確定性於斯托克斯流場域極值反應解析與量測數據降噪之連體力學研究 | zh_TW |
dc.title | Continuum Mechanics of Extreme Response Analysis and Measurement Noise Reduction for Stokes flow under Uncertainty | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-1 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 陳壁彰;董奕鍾;周逸儒;劉建豪 | zh_TW |
dc.contributor.oralexamcommittee | Bi-Chang Chen;Yi-Chung Tung;Yi-Ju Chou;Chien-Hao Liu | en |
dc.subject.keyword | 連體力學,斯托克斯流,不確定性,有限元素法,場域極值反應解析,場域量測降噪技術, | zh_TW |
dc.subject.keyword | Continuum mechanics,Stokes flow,Uncertainty,Finite element analysis,Extreme responses analysis,Measurement data noise reduction, | en |
dc.relation.page | 120 | - |
dc.identifier.doi | 10.6342/NTU202300224 | - |
dc.rights.note | 同意授權(限校園內公開) | - |
dc.date.accepted | 2023-02-07 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 機械工程學系 | - |
dc.date.embargo-lift | 2024-01-01 | - |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-1.pdf 授權僅限NTU校內IP使用(校園外請利用VPN校外連線服務) | 19.5 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。