請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/85873
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊宏智(Hong-Tsu Young) | |
dc.contributor.advisor | 楊宏智(Hong-Tsu Young | yichinh@gmail.com | ), | |
dc.contributor.author | Yi-Tse Chang | en |
dc.contributor.author | 張以澤 | zh_TW |
dc.date.accessioned | 2023-03-19T23:27:13Z | - |
dc.date.copyright | 2022-09-26 | |
dc.date.issued | 2022 | |
dc.date.submitted | 2022-09-23 | |
dc.identifier.citation | [1] F. Shrouf, J. Ordieres, and G. Miragliotta, “Smart factories in Industry 4.0: A review of the concept and of energy management approached in production based on the Internet of Things paradigm,” in 2014 IEEE International Conference on Industrial Engineering and Engineering Management, Selangor Darul Ehsan, Malaysia, Dec. 2014, pp. 697–701. doi: 10.1109/IEEM.2014.7058728. [2] B. Neumeier and D. Schmitt-Landsiedel, “Online Condition Measurement of High Power Solid State Laser Cutting Optics using Ultrasound Signals,” Physics Procedia, vol. 56, pp. 1252–1260, 2014, doi: 10.1016/j.phpro.2014.08.041. [3] D. Reitemeyer, T. Seefeld, and F. Vollertsen, “Online focus shift measurement in high power fiber laser welding,” Physics Procedia, vol. 5, pp. 455–463, 2010, doi: 10.1016/j.phpro.2010.08.073. [4] M. H. Mahdieh, M. Akbari Jafarabadi, and E. Ahmadinejad, “Thermal lens effect induced by high power diode laser beam in liquid ethanol and its influence on a probe laser beam quality,” Chengdu, China, Feb. 2015, p. 925531. doi: 10.1117/12.2065656. [5] Chia Wang, Guan-Yi Hong, Kuan-Ming Li, and Hong-Tsu Young, “A Miniaturized Nickel Oxide Thermistor via Aerosol Jet Technology,” Sensors, vol. 17, no. 11, p. 2602, Nov. 2017, doi: 10.3390/s17112602. [6] I. Y. Han and S. J. Kim, “Diode temperature sensor array for measuring micro-scale surface temperatures with high resolution,” Sensors and Actuators A: Physical, vol. 141, no. 1, pp. 52–58, Jan. 2008, doi: 10.1016/j.sna.2007.07.020. [7] K.-M. Li and S. Y. Liang, “Modeling of Cutting Temperature in Near Dry Machining,” Journal of Manufacturing Science and Engineering, vol. 128, no. 2, pp. 416–424, May 2006, doi: 10.1115/1.2162907. [8] A. Feteira, “Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors: An Industrial Perspective,” Journal of the American Ceramic Society, vol. 92, no. 5, pp. 967–983, May 2009, doi: 10.1111/j.1551-2916.2009.02990.x. [9] D. Mateos et al., “Synthesis of high purity nickel oxide by a modified sol-gel method,” Ceramics International, vol. 45, no. 9, pp. 11403–11407, Jun. 2019, doi: 10.1016/j.ceramint.2019.03.005. [10] M. Farbod, V. K. dehbidi, and M. Z. Shoushtari, “Size dependence of optical and magnetic properties of nickel oxide nanoparticles fabricated by electric arc discharge method,” Ceramics International, vol. 43, no. 16, pp. 13670–13676, Nov. 2017, doi: 10.1016/j.ceramint.2017.07.077. [11] I. Hotovy, V. Rehacek, P. Siciliano, S. Capone, and L. Spiess, “Sensing characteristics of NiO thin films as NO2 gas sensor,” Thin Solid Films, vol. 418, no. 1, pp. 9–15, Oct. 2002, doi: 10.1016/S0040-6090(02)00579-5. [12] I. Hotovy, J. Huran, L. Spiess, S. Hascik, and V. Rehacek, “Preparation of nickel oxide thin films for gas sensors applications,” Sensors and Actuators B: Chemical, vol. 57, no. 1–3, pp. 147–152, Sep. 1999, doi: 10.1016/S0925-4005(99)00077-5. [13] R. A. B. John, J. Shruthi, M. V. Ramana Reddy, and A. Ruban Kumar, “Manganese doped nickel oxide as room temperature gas sensor for formaldehyde detection,” Ceramics International, p. S0272884222007829, Mar. 2022, doi: 10.1016/j.ceramint.2022.03.036. [14] N. D. Hoa and S. A. El-Safty, “Synthesis of Mesoporous NiO Nanosheets for the Detection of Toxic NO2 Gas,” Chem. Eur. J., vol. 17, no. 46, pp. 12896–12901, Nov. 2011, doi: 10.1002/chem.201101122. [15] S. Kim et al., “Highly sensitive non-enzymatic lactate biosensor driven by porous nanostructured nickel oxide,” Ceramics International, vol. 45, no. 17, pp. 23370–23376, Dec. 2019, doi: 10.1016/j.ceramint.2019.08.037. [16] H. Ohta et al., “Fabrication and photoresponse of a pn-heterojunction diode composed of transparent oxide semiconductors, p-NiO and n-ZnO,” Appl. Phys. Lett., vol. 83, no. 5, pp. 1029–1031, Aug. 2003, doi: 10.1063/1.1598624. [17] F. Zhang, Y. Zhou, and H. Li, “Nanocrystalline NiO as an electrode material for electrochemical capacitor,” Materials Chemistry and Physics, vol. 83, no. 2–3, pp. 260–264, Feb. 2004, doi: 10.1016/j.matchemphys.2003.09.046. [18] K. Fominykh et al., “Ultrasmall Dispersible Crystalline Nickel Oxide Nanoparticles as High-Performance Catalysts for Electrochemical Water Splitting,” Adv. Funct. Mater., vol. 24, no. 21, pp. 3123–3129, Jun. 2014, doi: 10.1002/adfm.201303600. [19] B. Zhao et al., “Synthesis of Flower-Like NiO and Effects of Morphology on Its Catalytic Properties,” J. Phys. Chem. C, vol. 113, no. 32, pp. 14440–14447, Aug. 2009, doi: 10.1021/jp904186k. [20] T. W. Kim et al., “Bifunctional Heterogeneous Catalysts for Selective Epoxidation and Visible Light Driven Photolysis: Nickel Oxide-Containing Porous Nanocomposite,” Adv. Mater., vol. 20, no. 3, pp. 539–542, Feb. 2008, doi: 10.1002/adma.200701677. [21] H. Liu, G. Wang, J. Liu, S. Qiao, and H. Ahn, “Highly ordered mesoporous NiO anode material for lithium ion batteries with an excellent electrochemical performance,” J. Mater. Chem., vol. 21, no. 9, p. 3046, 2011, doi: 10.1039/c0jm03132a. [22] S. Seo et al., “Reproducible resistance switching in polycrystalline NiO films,” Appl. Phys. Lett., vol. 85, no. 23, pp. 5655–5657, Dec. 2004, doi: 10.1063/1.1831560. [23] X. Wang et al., “NiO nanocone array electrode with high capacity and rate capability for Li-ion batteries,” J. Mater. Chem., vol. 21, no. 27, p. 9988, 2011, doi: 10.1039/c1jm11490e. [24] D. Paeng et al., “Laser-Induced Reductive Sintering of Nickel Oxide Nanoparticles under Ambient Conditions,” J. Phys. Chem. C, vol. 119, no. 11, pp. 6363–6372, Mar. 2015, doi: 10.1021/jp512776p. [25] D. Lee, D. Paeng, H. K. Park, and C. P. Grigoropoulos, “Vacuum-Free, Maskless Patterning of Ni Electrodes by Laser Reductive Sintering of NiO Nanoparticle Ink and Its Application to Transparent Conductors,” ACS Nano, vol. 8, no. 10, pp. 9807–9814, Oct. 2014, doi: 10.1021/nn503383z. [26] A. M. Soleimanpour, S. V. Khare, and A. H. Jayatissa, “Enhancement of Hydrogen Gas Sensing of Nanocrystalline Nickel Oxide by Pulsed-Laser Irradiation,” ACS Appl. Mater. Interfaces, vol. 4, no. 9, pp. 4651–4657, Sep. 2012, doi: 10.1021/am301024a. [27] I. Fasaki et al., “Nickel oxide thin films synthesized by reactive pulsed laser deposition: characterization and application to hydrogen sensing,” Appl. Phys. A, vol. 91, no. 3, pp. 487–492, Jun. 2008, doi: 10.1007/s00339-008-4435-0. [28] K. Esenowo Jack, E. O. Nwangwu, I. Agwu Etu, and E. U. Osuagwu, “A Simple Thermistor Design for Industrial Temperature Measurement,” IOSR, vol. 11, no. 05, pp. 57–66, May 2016, doi: 10.9790/1676-1105035766. [29] P. Ouyang, H. Zhang, Y. Zhang, J. Wang, and Z. Li, “Zr-substituted SnO2-based NTC thermistors with wide application temperature range and high property stability,” J Mater Sci: Mater Electron, vol. 26, no. 8, pp. 6163–6169, Aug. 2015, doi: 10.1007/s10854-015-3197-7. [30] J. A. Becker, C. B. Green, and G. L. Pearson, “Properties and Uses of Thermistors-Thermally Sensitive Resistors,” p. 43. [31] S. D. Wood, B. W. Mangum, J. J. Filliben, and S. B. Tillett, “An investigation of the stability of thermistors,” J. RES. NATL. BUR. STAN., vol. 83, no. 3, p. 247, May 1978, doi: 10.6028/jres.083.015. [32] C. C. Wang, S. A. Akbar, W. Chen, and J. R. Schorr, “High-temperature thermistors based on yttria and calcium zirconate,” Sensors and Actuators A: Physical, vol. 58, no. 3, pp. 237–243, Mar. 1997, doi: 10.1016/S0924-4247(97)01394-0. [33] D. Houivet, J. Bernard, and J.-M. Haussonne, “High temperature NTC ceramic resistors (ambient–1000 °C),” Journal of the European Ceramic Society, vol. 24, no. 6, pp. 1237–1241, Jan. 2004, doi: 10.1016/S0955-2219(03)00376-5. [34] C.-C. Huang, Z.-K. Kao, and Y.-C. Liao, “Flexible Miniaturized Nickel Oxide Thermistor Arrays via Inkjet Printing Technology,” ACS Appl. Mater. Interfaces, vol. 5, no. 24, pp. 12954–12959, Dec. 2013, doi: 10.1021/am404872j. [35] R. K. Kamat and G. M. Naik, “Thermistors – in search of new applications, manufacturers cultivate advanced NTC techniques,” Sensor Review, vol. 22, no. 4, pp. 334–340, Dec. 2002, doi: 10.1108/02602280210444654. [36] T. G. Souza Cruz, M. U. Kleinke, and A. Gorenstein, “Evidence of local and global scaling regimes in thin films deposited by sputtering: An atomic force microscopy and electrochemical study,” Appl. Phys. Lett., vol. 81, no. 26, pp. 4922–4924, Dec. 2002, doi: 10.1063/1.1530739. [37] M. Lee, S. Seo, D. Seo, E. Jeong, and I. K. Yoo, “Properties of Nickel Oxide Films by DC Reactive Sputtering,” Integrated Ferroelectrics, vol. 68, no. 1, pp. 19–25, Jan. 2004, doi: 10.1080/10584580490895509. [38] Z. Jiao, M. Wu, Z. Qin, and H. Xu, “The electrochromic characteristics of sol gel-prepared NiO thin film,” Nanotechnology, vol. 14, no. 4, pp. 458–461, Apr. 2003, doi: 10.1088/0957-4484/14/4/310. [39] Y. Wang, C. Ma, X. Sun, and H. Li, “Preparation and photoluminescence properties of organic–inorganic nanocomposite with a mesolamellar nickel oxide,” Microporous and Mesoporous Materials, vol. 71, no. 1–3, pp. 99–102, Jun. 2004, doi: 10.1016/j.micromeso.2004.03.022. [40] O. Oluwatosin Abegunde et al., “Overview of thin film deposition techniques,” AIMS Materials Science, vol. 6, no. 2, pp. 174–199, 2019, doi: 10.3934/matersci.2019.2.174. [41] Q. Huang and Y. Zhu, “Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications,” Adv. Mater. Technol., vol. 4, no. 5, p. 1800546, May 2019, doi: 10.1002/admt.201800546. [42] Y. Li, K. Zhou, P. Tan, S. B. Tor, C. K. Chua, and K. F. Leong, “Modeling temperature and residual stress fields in selective laser melting,” International Journal of Mechanical Sciences, vol. 136, pp. 24–35, Feb. 2018, doi: 10.1016/j.ijmecsci.2017.12.001. [43] J. Linares, J. Chaves-Jacob, Q. Lopez, and J.-M. Sprauel, “Fatigue life optimization for 17-4Ph steel produced by selective laser melting,” RPJ, vol. 28, no. 6, pp. 1182–1192, May 2022, doi: 10.1108/RPJ-03-2021-0062. [44] M. Khorasani, A. Ghasemi, B. Rolfe, and I. Gibson, “Additive manufacturing a powerful tool for the aerospace industry,” RPJ, vol. 28, no. 1, pp. 87–100, Jan. 2022, doi: 10.1108/RPJ-01-2021-0009. [45] A. Mette, P. L. Richter, M. Hörteis, and S. W. Glunz, “Metal aerosol jet printing for solar cell metallization,” Prog. Photovolt: Res. Appl., vol. 15, no. 7, pp. 621–627, Nov. 2007, doi: 10.1002/pip.759. [46] R. (Ross) Salary, J. P. Lombardi, M. S. Tootooni, R. Donovan, P. K. Rao, and M. D. Poliks, “In Situ Sensor-Based Monitoring and Computational Fluid Dynamics (CFD) Modeling of Aerosol Jet Printing (AJP) Process,” in Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing, Blacksburg, Virginia, USA, Jun. 2016, p. V002T04A049. doi: 10.1115/MSEC2016-8535. [47] Y.-T. Chang, K.-Y. Hung, H.-T. Young, K.-M. Li, and R. K. Chen, “Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors,” Int J Adv Manuf Technol, Sep. 2021, doi: 10.1007/s00170-021-08046-7. [48] H. Zheng et al., “Low voltage driven NiO thin film capacitors for tunable applications,” Thin Solid Films, vol. 669, pp. 151–156, Jan. 2019, doi: 10.1016/j.tsf.2018.10.051. [49] M. El-Kemary, N. Nagy, and I. El-Mehasseb, “Nickel oxide nanoparticles: Synthesis and spectral studies of interactions with glucose,” Materials Science in Semiconductor Processing, vol. 16, no. 6, pp. 1747–1752, Dec. 2013, doi: 10.1016/j.mssp.2013.05.018. [50] J.-E. Kang et al., “LaNiO3 conducting particle dispersed NiMn2O4 nanocomposite NTC thermistor thick films by aerosol deposition,” Journal of Alloys and Compounds, vol. 534, pp. 70–73, Sep. 2012, doi: 10.1016/j.jallcom.2012.04.038. [51] D. C. Montgomery, Design and Analysis of Experiments. John Wiley & Sons, 2017. [52] X. Wan, Z. Zhang, B. Leng, and X. Deng, “Three dimensional measurements of engine plumes with four-channel single spectral tomography,” J. Appl. Phys., p. 7. [53] J. Shanker, M. Buchi Suresh, P. Saravanan, and D. Suresh Babu, “Effects of Fe substitution on structural, electrical and magnetic properties of Erbium ortho-chromite nano polycrystalline material,” Journal of Magnetism and Magnetic Materials, vol. 477, pp. 167–181, May 2019, doi: 10.1016/j.jmmm.2018.10.094. [54] D. R. Flynn, “Thermal Conductivity of Loose-Fill Materials by a Radial-Heat-Flow Method,” in Compendium of Thermophysical Property Measurement Methods, K. D. Maglić, A. Cezairliyan, and V. E. Peletsky, Eds. Boston, MA: Springer US, 1992, pp. 33–75. doi: 10.1007/978-1-4615-3286-6_2. [55] M. J. Assael, S. Botsios, K. Gialou, and I. N. Metaxa, “Thermal Conductivity of Polymethyl Methacrylate (PMMA) and Borosilicate Crown Glass BK7,” Int J Thermophys, vol. 26, no. 5, pp. 1595–1605, Sep. 2005, doi: 10.1007/s10765-005-8106-5. [56] D. Zhao, X. Qian, X. Gu, S. A. Jajja, and R. Yang, “Measurement Techniques for Thermal Conductivity and Interfacial Thermal Conductance of Bulk and Thin Film Materials,” Journal of Electronic Packaging, vol. 138, no. 4, p. 040802, Dec. 2016, doi: 10.1115/1.4034605. [57] “UserManual-KeyenceVK-X200K.pdf.” [58] B. D. Cullity and J. W. Weymouth, “Elements of X-Ray Diffraction,” American Journal of Physics 25, pp. 394–395, 1957. [59] V. Biju, N. Sugathan, V. Vrinda, and S. L. Salini, “Estimation of lattice strain in nanocrystalline silver from X-ray diffraction line broadening,” J Mater Sci, vol. 43, no. 4, pp. 1175–1179, Feb. 2008, doi: 10.1007/s10853-007-2300-8. [60] V. Senthilkumar, P. Vickraman, M. Jayachandran, and C. Sanjeeviraja, “Structural and electrical studies of nano structured Sn1−x Sb x O2 (x = 0.0, 1, 2.5, 4.5 and 7 at%) prepared by co-precipitation method,” J Mater Sci: Mater Electron, vol. 21, no. 4, pp. 343–348, Apr. 2010, doi: 10.1007/s10854-009-9918-z. [61] G. Schnell, U. Duenow, and H. Seitz, “Effect of Laser Pulse Overlap and Scanning Line Overlap on Femtosecond Laser-Structured Ti6Al4V Surfaces,” Materials, vol. 13, no. 4, p. 969, Feb. 2020, doi: 10.3390/ma13040969. [62] Y.-T. Chang, K.-Y. Hung, C.-H. Chien, H.-T. Young, W.-T. Hsiao, and K.-M. Li, “Ultraviolet Laser Sintering of Printed Nickel Oxide Nanoparticles for Thin-Film Thermistor via Aerosol Jet Printing Technology,” Applied Sciences, vol. 12, no. 14, p. 7206, Jul. 2022, doi: 10.3390/app12147206. [63] T. S. Ponmudi, C.-W. Lee, C.-C. Lai, and C.-H. Tsai, “Comparative study on the effect of annealing temperature on sol–gel-derived nickel oxide thin film as hole transport layers for inverted perovskite solar cells,” J Mater Sci: Mater Electron, vol. 32, no. 6, pp. 8157–8166, Mar. 2021, doi: 10.1007/s10854-021-05537-x. [64] R. L. Coble, “A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials,” Journal of Applied Physics, vol. 34, no. 6, pp. 1679–1682, Jun. 1963, doi: 10.1063/1.1702656. [65] Department of Physics, V.V.Vanniaperumal College for Women, Virudhunagar – 626001, Tamilnadu, India., P. Malliga, J. Pandiarajan, N. Prithivikumaran, and K. Neyvasagam, “Influence of Film Thickness on Structural and Optical Properties of Sol – Gel Spin Coated TiO2 Thin Film,” IOSRJAP, vol. 6, no. 1, pp. 22–28, 2014, doi: 10.9790/4861-06112228. [66] P. Muhammed Shafi and A. Chandra Bose, “Impact of crystalline defects and size on X-ray line broadening: A phenomenological approach for tetragonal SnO 2 nanocrystals,” AIP Advances, vol. 5, no. 5, p. 057137, May 2015, doi: 10.1063/1.4921452. [67] G. Madhu, V. C. Bose, K. Maniammal, A. S. Aiswarya Raj, and V. Biju, “Microstrain in nanostructured nickel oxide studied using isotropic and anisotropic models,” Physica B: Condensed Matter, vol. 421, pp. 87–91, Jul. 2013, doi: 10.1016/j.physb.2013.04.028. [68] K. Maniammal, G. Madhu, and V. Biju, “X-ray diffraction line profile analysis of nanostructured nickel oxide: Shape factor and convolution of crystallite size and microstrain contributions,” Physica E: Low-dimensional Systems and Nanostructures, vol. 85, pp. 214–222, Jan. 2017, doi: 10.1016/j.physe.2016.08.035. [69] B. P. Jelle, “Solar radiation glazing factors for window panes, glass structures and electrochromic windows in buildings—Measurement and calculation,” Solar Energy Materials and Solar Cells, vol. 116, pp. 291–323, Sep. 2013, doi: 10.1016/j.solmat.2013.04.032. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/85873 | - |
dc.description.abstract | 熱透鏡效應是因不可預期的透鏡加熱變形而導致折射率改變、焦點位移的現象。造成異常的加溫之原因主要是光學元件表面沾黏加工碎屑或是劣質光學元件導致熱能在透鏡中累積。因此,在本研究中運用氧化鎳薄膜熱敏電阻來達到監控球形透鏡中心溫度的目的。感測薄膜透過氣溶膠噴印技術可以精準且有效率的製作於曲面之上。 為了達到高效率的小批量生產,感測器的燒結利用355奈米波長紫外光雷射並搭配噴印技術進而達到縮減工序以及降低製程時間的效果。相較於先前研究常見的烘箱燒結製程,紫外光雷射不只大幅度的增加電性並且將單一熱敏電阻的燒結時間從一小時降至一秒左右。實驗結果顯示最佳雷射燒結參數將氧化鎳熱敏電阻從烘箱燒結的電阻106.8 MΩ 降低到了 6.15 MΩ,使得氧化鎳熱敏電阻可以在常溫之下穩定的操作。本研究中以電性、表面形貌和X光繞射分析(XRD),探討了紫外光雷射對於氧化鎳燒結影響。當能量過高時,發現紫外光雷射的高能量吸收會產生薄膜裂縫並降低電阻。XDR分析中顯示,不管是晶粒大小或是晶面距離都顯示紫外光雷射在實驗範圍內並沒有造成薄膜的再結晶,且有應力累積的現象。燒結後薄膜表面的裂縫是因為區域不均勻的收縮應變所導致。 熱敏電阻應用於球面鏡的結果顯示,感測器擁有高敏感度,穩定,可重複性,且沒有出現遲滯的現象。將測量到的熱敏電阻溫度利用熱傳公式計算鏡面中心溫度與實際使用熱像儀所偵測到的鏡面中心溫度進行誤差分析,計算的中心溫度和測量溫度的最大差異只有3.7%。證明本研究所提出之方法可用於球面鏡中心溫度監測。 | zh_TW |
dc.description.abstract | Thermal lens effect occurs due to the unexpected deformation of lens caused by laser abnormal heating, which has an impact on refractive index of lens. Usually, optic contaminations or bad quality of lens are two main reasons that cause abnormal heating and eventually lead to focal plane shifting. Therefore, a novel method, printed nanoparticle NiO thin film thermistors with Radial heat flow method, was applied for temperature detection of lens in this study. The thin film thermistors were printed by an aerosol jet printer, which is capable of fabricating thin films on the curve substrate via air stream. To approach high efficiency fabricating thin film thermistors in small batch sizes, the printed NiO nanoparticle thin films were sintered by using a 355 nm wavelength ultraviolet (UV) laser; this novel fabrication method reduced several steps of the conventional manufacturing process of the thermistor. Compared with furnace heat treatments of the NiO thermistor in previous studies, the UV laser sintering not only significantly improved the electrical properties but decreased the treatment time from an hour to a second. Since the resistance declined, the thermistor has been operated at an ambient temperature, which provides ready measurement. The resistance, morphology and XRD patterns of the thin films were analyzed for evaluating the effect of the laser treatment. Due to the laser-sintering parameters, namely, 2 W, 150 mm/s, 90 kHz, and a B value of 4683 K, the resistance has been reduced from 106.8 MΩ to 6.15 MΩ at 100 °C. For NiO nanoparticles, UV laser has higher absorption energy than that of other wavelength lasers, when excess laser output was applied to the NiO thin film, cracks were observed on the surface. It was found that the crystal plane distances were not affected by recrystallization, but the cracks were based on the XRD analysis. Based on the analysis, there were obvious regional compressive stains before the appearance of cracks, and the uneven shrinking strains caused the cracks on the surface as energy irradiation increased. According to the performance of the thermistors on lenses, the detection properties of NiO thin films were sensitive, stable, repeatable and without any hysteretic effects. Therefore, the method of thermistor and thermal conduction equation was feasible for temperature detection of focal lenses. The deviation between the detected temperatures and calculated temperatures from the thermal conduction equation were negligible. According to the results of calculated temperature, the deviations from thermal equation were able to be minimized by minifying the volume difference between lens and mathematical model and considering the effect of various radius of curvature on heat transfer rates | en |
dc.description.provenance | Made available in DSpace on 2023-03-19T23:27:13Z (GMT). No. of bitstreams: 1 U0001-2109202218103200.pdf: 26744315 bytes, checksum: 457f4934612497e4fcf8a8065d013051 (MD5) Previous issue date: 2022 | en |
dc.description.tableofcontents | 致謝 1 摘要 2 Abstract 3 Table of Contents 5 List of Figures 8 List of Table 12 Nomenclature 13 CHAPTER 1 Introduction 14 1.1 Background and motivation 14 1.2 Research aims and objectives 14 1.3 Structure of the dissertation 17 CHAPTER 2 Literature review 18 2.1 Monitoring Thermal Lens Effect 18 2.2 Nickel oxide applications 20 2.3 Negative temperature coefficient (NTC) 22 2.4 Thin film fabrication process 23 2.5 Light treatment process 25 2.6 Summary 27 CHAPTER 3 Research Design and Methods 28 3.1 Synopsis 28 3.2 Ultraviolet laser processing system 29 3.2.1 Laser experimental parameters for characterization experiments 30 3.3 Thin film deposition technique and NiO ink preparation 35 3.3.1 Aerosol jet printing technique 35 3.3.2 NiO ink preparation 37 3.4 Experimental design of characterizations experiments 39 3.4.1 NiO thin films fabrication 39 3.4.2 Experiment of characterization experiments 42 3.5 Experimental design of thermistor application 44 3.5.1 The fabrication of lens thermistor 44 3.5.2 Experiments of thermistor application 48 3.5.3 Calculation of center lens temperature by thermal conduction equation 53 3.6 Equipment of morphological analyses 56 3.6.1 Laser scanning confocal microscopy 56 3.6.2 Emission scanning electron microscope (FE-SEM) 57 3.6.3 X-ray diffractometer (XRD) 58 CHAPTER 4 Results and Discussions 61 4.1 Characterization of NiO thin films with furnace curing 61 4.2 Characterization experiments 62 4.2.1 Characterization of NiO thin films after laser sintering 62 4.2.2 Sensitivity (B value) 67 4.2.3 The optimal parameters setting 70 4.2.4 Surface morphological analyses 72 4.2.5 X-ray Diffraction (XRD) analysis 79 4.2.6 Summary of characterization experiments 86 4.3 Thermistor application 87 4.3.1 Results of stability, repeatability experiments 87 4.3.2 Establishment of resistance temperature regression equations 90 4.3.3 Estimation of the calculated center temperature of lenses 92 4.3.4 Deviation analysis of thermal conduction equation 95 4.3.5 Summary of thermistor application 101 CHAPTER 5 Conclusions and Future works 102 5.1 Conclusions 102 5.2 Future work 103 5.3 List of publications from this dissertation 104 References 105 Appendix 110 | |
dc.language.iso | en | |
dc.title | 紫外光雷射燒結奈米氧化鎳薄膜之特性分析與應用 | zh_TW |
dc.title | Characterization and Application of Ultraviolet Laser Sintering of Nickel Oxide Nanoparticle Thin‐Films | en |
dc.type | Thesis | |
dc.date.schoolyear | 110-2 | |
dc.description.degree | 博士 | |
dc.contributor.coadvisor | 李貫銘(Kuan-Ming Li) | |
dc.contributor.oralexamcommittee | 盧彥文(Yen-Wen Lu),葉家宏(Chia-Hung Yeh),蕭文澤(Wen-Tse H) | |
dc.subject.keyword | 紫外光雷射燒結,奈米氣溶膠噴印技術,熱敏電阻,奈米氧化鎳,透鏡溫度感測, | zh_TW |
dc.subject.keyword | Ultraviolet laser sintering,Aerosol jet printing,Thermistor,Nickel oxide nanoparticles,Temperature detection of lens, | en |
dc.relation.page | 112 | |
dc.identifier.doi | 10.6342/NTU202203755 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2022-09-25 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
dc.date.embargo-lift | 2022-09-26 | - |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
U0001-2109202218103200.pdf | 26.12 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。