請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/85386
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 王倫 | zh_TW |
dc.contributor.advisor | Lon A. Wang | en |
dc.contributor.author | 蘇江平 | zh_TW |
dc.contributor.author | Chiang-Ping Saw | en |
dc.date.accessioned | 2023-03-19T23:16:01Z | - |
dc.date.available | 2023-11-10 | - |
dc.date.copyright | 2022-10-19 | - |
dc.date.issued | 2022 | - |
dc.date.submitted | 2002-01-01 | - |
dc.identifier.citation | [1]Bayindir, Mehmet, et al. "Metal–insulator–semiconductor optoelectronic fibres." Nature 431.7010 (2004): 826-829.
[2] Mehta, P., et al. "All-optical modulation using two-photon absorption in silicon core optical fibers." Optics express 19.20 (2011): 19078-19083. [3] Mehta, P., et al. "Nonlinear transmission properties of hydrogenated amorphous silicon core optical fibers." Optics express 18.16 (2010): 16826-16831. [4] Shen, L., et al. "Four-wave mixing and octave-spanning supercontinuum generation in a small core hydrogenated amorphous silicon fiber pumped in the mid-infrared." Optics Letters 39.19 (2014): 5721-5724. [5] Wu, Dong, et al. "Net optical parametric gain in a submicron silicon core fiber pumped in the telecom band." APL Photonics 4.8 (2019): 086102. [6] Sohanpal, Ronit, et al. "Parametric frequency comb generation using silicon core fiber." 2021 Optical Fiber Communications Conference and Exhibition (OFC). IEEE, 2021. [7] Peacock, Anna C., et al. "Wavelength conversion and supercontinuum generation in silicon optical fibers." IEEE Journal of Selected Topics in Quantum Electronics 24.3 (2017): 1-9. [8] Bass M 2010 Handbook of Optics: Volume IV—Optical Properties of Materials, Nonlinear Optics, Quantum Optics 3rd edn (New York: McGraw-Hill) ch5 [9] Eggleton, et al., "Chalcogenide photonics." Nature photonics 5.3 (2011): 141-148. [10] Peacock, Anna C., and Noel Healy. "Semiconductor optical fibres for infrared applications: A review." Semiconductor Science and Technology 31.10 (2016): 103004. [11] Sazio, Pier JA, et al. "Microstructured optical fibers as high-pressure microfluidic reactors." Science 311.5767 (2006): 1583-1586. [12] Coco, Michael G., et al. "HPCVD of ZnSxSe1–x Claddings for ZnSe Optical Fibers." Novel Optical Materials and Applications. Optical Society of America, 2021. [13] Matres, J., et al. "High nonlinear figure-of-merit amorphous silicon waveguides." Optics express 21.4 (2013): 3932-3940. [14] Ballato, J., et al. "Silicon optical fiber." Optics express 16.23 (2008): 18675-18683. [15] Ren, Haonan, et al. "Tapered silicon core fibers with nano-spikes for optical coupling via spliced silica fibers." Optics Express 25.20 (2017): 24157-24163. [16] Healy, Noel, et al. "CO2 laser‐induced directional recrystallization to produce single crystal silicon‐core optical fibers with low loss." Advanced Optical Materials 4.7 (2016): 1004-1008. [17] Kudinova, M., et al. "Silicon-core optical fiber with losses below 0.2 dB/cm." Specialty Optical Fibers. Optical Society of America, 2020. [18] Ordu, Mustafa, et al. "Effect of thermal annealing on mid-infrared transmission in semiconductor alloy-core glass-cladded fibers." Advanced Fiber Materials 2.3 (2020): 178-184. [19] Gupta, N., et al. "Annealing of silicon optical fibers." Journal of Applied Physics 110.9 (2011): 093107. 1 [20] Ji, Xiaoyu, et al. "Single-crystal silicon optical fiber by direct laser crystallization." ACS Photonics 4.1 (2017): 85-92. [21] Healy, Noel, et al. "CO2 laser‐induced directional recrystallization to produce single crystal silicon‐core optical fibers with low loss." Advanced Optical Materials 4.7 (2016): 1004-1008. [22] Iverson, R. B., and R. Reif. "Recrystallization of amorphized polycrystalline silicon films on SiO2: Temperature dependence of the crystallization parameters." Journal of applied physics 62.5 (1987): 1675-1681. [23] Zhao, Ziwen, et al. "CO 2 laser annealing of Ge core optical fibers with different laser power." Optical Materials Express 9.3 (2019): 1333-1347. [24] Hunsperger, Robert G., A. Yariv, and A. Lee. "Parallel end-butt coupling for optical integrated circuits." Applied optics 16.4 (1977): 1026-1032. [25] Sim, Dong Hoon, Yuichi Takushima, and Yun C. Chung. "High-speed multimode fiber transmission by using mode-field matched center-launching technique." Journal of Lightwave Technology 27.8 (2009): 1018-1026. [26] Shiraishi, Kazuo, Yoshizo Aizawa, and Shojiro Kawakami. "Beam expanding fiber using thermal diffusion of the dopant." Journal of lightwave technology 8.8 (1990): 1151-1161. [27] Kose, Bulent, et al. "Performance of single-mode transmission over multimode fiber: Offset launch vs fundamental mode launch." Optical Fiber Communication Conference. Optica Publishing Group, 2021. [28] Li, Qian, et al. "Production of monodisperse gold nanobipyramids with number percentages approaching 100% and evaluation of their plasmonic properties." Advanced Optical Materials 3.6 (2015): 801-812. [29]Rao, Yun-Jiang. "Recent progress in fiber-optic extrinsic Fabry–Perot interferometric sensors." Optical Fiber Technology 12.3 (2006): 227-237. [30] Foreman, Matthew R., Jon D. Swaim, and Frank Vollmer. "Whispering gallery mode sensors." Advances in optics and photonics 7.2 (2015): 168-240. [31]Svedendahl, Mikael, et al. "Refractometric sensing using propagating versus localized surface plasmons: a direct comparison." Nano letters 9.12 (2009): 4428-4433. [32]Wang, Qi, and Wan-Ming Zhao. "A comprehensive review of lossy mode resonance-based fiber optic sensors." Optics and Lasers in Engineering 100 (2018): 47-60. [33]Mishra, Satyendra Kumar, Bing Zou, and Kin Seng Chiang. "Surface-plasmon-resonance refractive-index sensor with Cu-coated polymer waveguide." IEEE photonics technology letters 28.17 (2016): 1835-1838. [34]Arregui, Francisco J., et al. "Giant sensitivity of optical fiber sensors by means of lossy mode resonance." Sensors and Actuators B: Chemical 232 (2016): 660-665. 8 [35] Testa, Genni, et al. "Planar silicon-polydimethylsiloxane optofluidic ring resonator sensors." IEEE Photonics Technology Letters 28.2 (2015): 155-158. [36] Wang, Da-Shin, and Shih-Kang Fan. "Microfluidic surface plasmon resonance sensors: From principles to point-of-care applications." Sensors 16.8 (2016): 1175. [37]Nooke, Alida, et al. "On the application of gold based SPR sensors for the detection of hazardous gases." Sensors and Actuators B: Chemical 149.1 (2010): 194-198. [38]BASAK, RAJAT KUMAR. Development of Specialty Photonic Crystal Fiber for Plasmonic Applications. Diss. CSIR-Central Glass and Ceramic Research Institute, 2018. [39] Cheng, Xu, and Yogesh Jaluria. "Effect of draw furnace geometry on high-speed optical fiber manufacturing." Numerical Heat Transfer: Part A: Applications 41.8 (2002): 757-781. [40] Mawardi, A., and R. Pitchumani. "Optical fiber drawing process model using an analytical neck-down profile." IEEE Photonics Journal 2.4 (2010): 620-629. [41] Choudhury, S. Roy, and Yogesh Jaluria. "Practical aspects in the drawing of an optical fiber." Journal of Materials Research 13.2 (1998): 483-493. [42] Bretherton, Francis Patton. "The motion of long bubbles in tubes." Journal of Fluid Mechanics 10.2 (1961): 166-188. [43] Sato, Yuzuru, et al. "Viscosity of molten silicon and the factors affecting measurement." Journal of Crystal Growth 249.3-4 (2003): 404-415. [44] Zhao, Ning, et al. "Viscosity and surface tension of liquid Sn-Cu lead-free solders." Journal of electronic materials 38.6 (2009): 828-833. [45] Magnini, M., et al. "Dynamics of long gas bubbles rising in a vertical tube in a cocurrent liquid flow." Physical Review Fluids 4.2 (2019): 023601. [46] Nur, A., R. Afrianita, and R. D. T. F. Ramli. "Effect of pipe diameter changes on the properties of fluid in closed channels using Osborne Reynold Apparatus." IOP Conference Series: Materials Science and Engineering. Vol. 602. No. 1. IOP Publishing, 2019. [47] Auguste, Jean-Louis, et al. "Modified powder-in-tube technique based on the consolidation processing of powder materials for fabricating specialty optical fibers." Materials 7.8 (2014): 6045-6063. [48] Paek, U. C., and C. R. Kurkjian. "Calculation of cooling rate and induced stresses in drawing of optical fibers." Journal of the American Ceramic Society 58.7‐8 (1975): 330-335. [49] Wissuchek, Donald J., Carl W. Ponader, and James J. Price. "Analysis of residual stress in optical fiber." Optical Fiber Reliability and Testing. Vol. 3848. SPIE, 1999. [50] Meng, Xiangmei, et al. "Combustion study of partially gasified willow and DDGS chars using TG analysis and COMSOL modeling." Biomass and bioenergy 39 (2012): 356-369. [51] Bhat, A. A., et al. "Thermal Analysis of Induction Furnace." Proceedings of the COSMOL conference in Banglore. 2012. [52] Heat Transfer Module User's Guide. COMSOL Multiphysics® v. 5.6. COMSOL AB, Stockholm, Sweden. 2021 [53] CFD Module User's Guide. COMSOL Multiphysics® v. 5.3. COMSOL AB, Stockholm, Sweden. 2017 [54]Fujiwara, Kozo. "Crystal growth behaviors of silicon during melt growth processes." International Journal of Photoenergy 2012 (2012). [55] Fujiwara, Kozo, et al. "Directional growth method to obtain high quality polycrystalline silicon from its melt." Journal of Crystal Growth 292.2 (2006): 282-285. [56] Wang, T. Y., et al. "Grain control using spot cooling in multi-crystalline silicon crystal growth." Journal of Crystal Growth 311.2 (2009): 263-267. [57] Lee, Jun-Kyu, et al. "Directional solidification behaviors of polycrystalline silicon by electron-beam melting." Japanese Journal of Applied Physics 52.10S (2013): 10MB09. [58] Calder, I. D., and R. Sue. "Modeling of cw laser annealing of multilayer structures." Journal of Applied Physics 53.11 (1982): 7545-7550. [59]Dornberger, E., et al. "Thermal simulation of the Czochralski silicon growth process by three different models and comparison with experimental results." Journal of crystal growth 180.3-4 (1997): 461-467. [60]Glassbrenner, C. Jo, and Glen A. Slack. "Thermal conductivity of silicon and germanium from 3 K to the melting point." Physical review 134.4A (1964): A1058. [61]Okhotin, A. S., A. S. Pushkarskii, and V. V. Gorbachev, Thermophysical Properties of Semiconductors, Moscow, "Atom" Publ. House, 1972, (in Russian). [62] T. Sat¯o, “Spectral Emissivity of Silicon”, Japanese Journal of Applied Physics 6, 339–347 (1967). [63]Homa, Marta, and Natalia Sobczak. "Measurements of temperature and heat of phase transformation of pure silicon by using differential scanning calorimetry." Journal of Thermal Analysis and Calorimetry 138.6 (2019): 4215-4221. [64] Rhim, et al. "Thermophysical properties measurement of molten silicon by high-temperature electrostatic levitator: density, volume expansion, specific heat capacity, emissivity, surface tension and viscosity." Journal of crystal growth 208.1-4 (2000): 313-321. [65]E. Takasuka, et al. “Emissivity of liquid silicon in visible and infrared regions”, Journal of Applied Physics 81, 6384–6389 (1997). [66]Combis, Patrick, et al. "Evaluation of the fused silica thermal conductivity by comparing infrared thermometry measurements with two-dimensional simulations." Applied Physics Letters 101.21 (2012): 211908. [67] Zhao, Jian, et al. "Structural modification of silica glass by laser scanning." Journal of applied physics 95.10 (2004): 5475-5482. [68] Tanaka, H., et al. "Evaluation of hemispherical total emissivity for thermal radiation calorimetry." International journal of thermophysics 21.4 (2000): 927-940. [69] Wang, Xiaoman, et al. "Thermal characterization of convective heat transfer in microwires based on modified steady state" hot wire" method." arXiv preprint arXiv:1907.10751 (2019). [70] Love, J. D., et al. "Tapered single-mode fibres and devices. Part 1: Adiabaticity criteria." IEE Proceedings J (Optoelectronics) 138.5 (1991): 343-354. [71] Ho, Keang-Po, and Joseph M. Kahn. "Mode-dependent loss and gain: statistics and effect on mode-division multiplexing." Optics express 19.17 (2011): 16612-16635. [72] Manuylovich, Egor S., Vladislav V. Dvoyrin, and Sergei K. Turitsyn. "Fast mode decomposition in few-mode fibers." Nature communications 11.1 (2020): 1-9. [73] Shapira, O., Abouraddy, A. F., Joannopoulos, J. D. & Fink, Y. Complete modal decomposition for optical waveguides. Phys. Rev. Lett. 94, 143902 (2005). [74] Lü, H., Zhou, P., Wang, X. & Jiang, Z. Fast and accurate modal decomposition of multimode fiber based on stochastic parallel gradient descent algorithm. Appl. Opt. 52, 2905–2908 (2013). [75] Reiter, Sina, et al. "Parasitic absorption in polycrystalline Si-layers for carrier-selective front junctions." Energy Procedia 92 (2016): 199-204. [76] Huang, Wei-Ping, and Jianwei Mu. "Complex coupled-mode theory for optical waveguides." Optics Express 17.21 (2009): 19134-19152. [77] Gonthier, François, et al. "Mode coupling in nonuniform fibers: comparison between coupled-mode theory and finite-difference beam-propagation method simulations." JOSA B 8.2 (1991): 416-421. [78] Cooper, Michael L., and Shayan Mookherjea. "Numerically-assisted coupled-mode theory for silicon waveguide couplers and arrayed waveguides." Optics Express 17.3 (2009): 1583-1599. [79]Ma, Aning, Yuee Li, and Xiaoping Zhang. "Coupled mode theory for surface plasmon polariton waveguides." Plasmonics 8.2 (2013): 769-777. [80] Sukhorukov, Andrey A., et al. "Nonlinear coupled-mode theory for periodic plasmonic waveguides and metamaterials with loss and gain." Optics Letters 39.3 (2014): 462-465. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/85386 | - |
dc.description.abstract | 在本論文中,我們研究並提出了提高SCF產量和品質的方法。我們還設計了一套用於設計耦合型波導折射率傳感器的指南。在第二章中,我們推斷氣泡的形成導致SCF產量低和質量差。我們發現通過增加預形體的內徑可以緩解該問題,並提出了一種新的兩段式SCF抽絲方法以配合新的預形體尺寸。我們也設計並建造了這種新方法所需的自動化設備。我們還做了爐體加熱預形體的熱模擬,以了解熔爐的各種參數如何影響抽絲過程中預形體的溫度分佈。在第三章中,我們通過熱模擬和實驗研究了 CO2 雷射退火過程中,SCF 的溫度分佈,以便有效的控制退火過程。我們也建立了一個SCF矽核溫度檢測器和 SCF 定位器材以利於退火實驗。我們還研究了 SCF 中單模耦合和單模傳輸的可行性,並編寫了一個程序來識別在少模光纖中傳播的模式的。我們也對 SCF 的光場進行近場測量。在第四章中,我們使用耦合模理論和數值分析來找出提高耦合型波導折射率傳感器性能的方向,並用光學模擬驗證我們的推導。 | zh_TW |
dc.description.abstract | In this thesis, we investigated and developed methods to improve the production and quality of SCF. We also devised a set of guidelines for designing coupling-based waveguide refractive index sensors. In chapter 2, we deduced that the formation of air bubbles causes low yield and poor quality of SCF. We found out the problem can be partly mitigated by increasing the inner diameter of the preform. Therefore, a new two-stage drawing method for SCF drawing is proposed to draw the preforms with new geometry. Automated equipment needed for this new method is designed and built. We also conducted thermal modeling to understand how the furnace parameters affect the temperature distribution of the preform during the drawing process. In chapter 3, we investigated the temperature distribution in SCF during CO2 laser annealing through thermal simulation and experiment so that we can better control the annealing process. A new annealing set-up is built with a thermal monitor and a SCF positioning system. We also investigated the viability of single mode coupling and transmission in SCF and wrote a computer program to identify the amplitude of modes traveling in a few-mode fiber. Near field measurement of SCF is also carried out. In chapter 4, we used Coupled Mode Theory with numerical analysis to devise a set of guidelines for improving performance in a coupled waveguide RI sensor. The results are validated with optical simulation. | en |
dc.description.provenance | Made available in DSpace on 2023-03-19T23:16:01Z (GMT). No. of bitstreams: 1 U0001-2609202209113900.pdf: 8479645 bytes, checksum: 5b978082c09598efe1d65194112faed6 (MD5) Previous issue date: 2022 | en |
dc.description.tableofcontents | 誌謝 i
中文摘要 ii Abstract iii Statement of contribution iv Content v LIST OF FIGURES ix LIST OF TABLES xvii Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Literature Review 3 1.2.1 Silicon-cored Fiber Fabrication 3 1.2.2 SCF Annealing 5 1.2.3 Single Mode Coupling and Transmission in Multimode Fiber 7 1.2.4 Waveguide Based Refractive Index Sensor 8 1.3 Organization of the Thesis 9 Chapter 2 Fiber Drawing 10 2.1 Introduction 10 2.2 Fiber Drawing Equipment 10 2.2.1 Furnace System 11 2.2.2 Preform Feeding System. 13 2.3 Fiber Drawing Process 14 2.3.1 Preform 14 2.3.2 Drawing Procedure 14 2.3.3 Parameters and Data Collection 15 2.4 Data analysis 18 2.4.1 Success Rate 18 2.4.2 Temperature Inconsistency in Furnace 21 2.4.3 Conclusion 24 2.5 Air bubble 25 2.5.1 Melting of Solder Powder in Glass Preform 25 2.5.2 Melting of Silicon Powder in Glass Preform 29 2.6 New Optical Fiber Drawing Process and Equipment 34 2.6.1 Automated Fiber Drawing System 34 2.6.2 Two-Stage Drawing Process 40 2.6.3 Preform Drawing system 41 2.6.4 Results 46 2.7 Thermal Modelling of Drawing Furnace and Preform with COMSOL Multiphysics 48 2.7.1 Geometry and Material Constants 49 2.7.2 Thermal Model and Governing Equations 51 2.7.3 Boundary Conditions 53 2.7.4 Results 56 2.7.5 Experiment Verification 67 2.8 Summary 71 Chapter 3 Improving Quality of SCF 72 3.1 CO2 Laser Annealing of SCF 72 3.1.1 Introduction 72 3.1.2 Thermal Simulation of CO2 Laser Annealing Process 74 3.1.3 CO2 Laser Annealing Experiment 88 3.2 Single Mode Coupling and Transmission in Multimode SCF 101 3.2.1 Introduction 101 3.2.2 Single Mode Coupling 101 3.2.3 Mode Decomposition Algorithm 103 3.2.4 Near Field Measurement of Fiber Modes 108 3.3 Summary 111 Chapter 4 Design Guidelines for Coupled Waveguide Sensor 112 4.1 Introduction 112 4.2 Modes in Guided Waves Devices 113 4.3 Coupled Waveguide Sensor 114 4.4 Complex Coupled Mode Theory for Coupled Waveguide Sensor 117 4.4.1 Derivation of Complex Coupled Mode Theory 118 4.4.2 Power in Coupled Waveguide Sensor 123 4.4.3 Phase Matching Condition 125 4.4.4 Non-phase Matching Condition 131 4.4.5 Sensor Optical Spectrum 133 4.5 Performance of Sensor 136 4.5.1 Sensitivity 136 4.5.2 FWHM 139 4.5.3 Length 142 4.5.4 FOM 143 4.6 Validation with Optical Simulation 144 4.7 Guidelines for Designing Coupled Waveguide Sensor 154 4.8 Summary 155 Chapter 5 Conclusion and Future Work 156 5.1 Conclusion 156 5.2 Future Work 158 REFERENCES 159 | - |
dc.language.iso | zh_TW | - |
dc.title | 矽核光纖製程和退火方法之改善與探討耦合形波導折射率感測器的優化 | zh_TW |
dc.title | Improvement in Fabrication and Annealing Methods of Silicon Cored Fibers and Optimization of Coupled Waveguide Refractive Index Sensors | en |
dc.type | Thesis | - |
dc.date.schoolyear | 110-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 陳學禮;黃念祖;林鈺城 | zh_TW |
dc.contributor.oralexamcommittee | Hsuen-Li Chen;Nien-Tsu Huang;Yu-Cheng Lin | en |
dc.subject.keyword | 矽核光纖,光纖抽絲,雷射退火,折射率感測器,耦合模理論, | zh_TW |
dc.subject.keyword | silicon cored fiber,fiber drawing,fiber annealing,refractive index sensor,coupled mode theory, | en |
dc.relation.page | 166 | - |
dc.identifier.doi | 10.6342/NTU202204042 | - |
dc.rights.note | 同意授權(全球公開) | - |
dc.date.accepted | 2022-09-27 | - |
dc.contributor.author-college | 電機資訊學院 | - |
dc.contributor.author-dept | 光電工程學研究所 | - |
dc.date.embargo-lift | 2025-09-08 | - |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-110-2.pdf 此日期後於網路公開 2025-09-08 | 8.28 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。