請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/84551
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 盧信嘉(Hsin-Chia Lu) | |
dc.contributor.advisor | 盧信嘉(Hsin-Chia Lu | leonardo.hc.lu@gmail.com | ), | |
dc.contributor.author | Ming-Yu Song | en |
dc.contributor.author | 宋明諭 | zh_TW |
dc.date.accessioned | 2023-03-19T22:15:20Z | - |
dc.date.copyright | 2022-09-30 | |
dc.date.issued | 2022 | |
dc.date.submitted | 2022-09-21 | |
dc.identifier.citation | [1] RO4000® Series Laminates – Rogers Corporation. [Online]. Available: https://www.rogerscorp.com/advanced-electronics-solutions/ro4000-series-laminates [2] RO3000® Series Laminates – Rogers Corporation. [Online]. Available: https://www.rogerscorp.com/advanced-electronics-solutions/ro3000-series-laminates [3] 5G mmWave天線封裝AiP的應用趨勢 . [Online]. Available: https://ase.aseglobal.com/ch/blog/5g-mmwave-aip-application [4] David M. Pozar, Microwave Engineering, 4th edition, John Wiley & Sons, 2011. [5] I. J. Bahl and R. Garg, “A designer’s guide to stripline circuits,” Microwaves, pp. 90–96, January 1978. [6] Rainee N. Simons, Coplanar Waveguide Circuits, Components, and Systems, John Wiley & Sons, 2001. [7] G. Ghione and C. Naldi, 'Parameters of coplanar waveguides with lower ground plane,' in Electronics Letters, vol. 19, no. 18, pp. 734-735, September 1983. [8] Iulian Rosu, “Microstrip, stripline, CPW, and SIW design”. [Online]. Available: http://www.qsl.net/va3iul [9] C. Seguinot, P. Kennis, J. F. Legier, F. Huret, E. Paleczny and L. Hayden, 'Multimode TRL—A new concept in microwave measurements:theory and experimental verification,' in IEEE Transactions on Microwave Theory and Techniques, vol. 46, no. 5, pp. 536-542, May 1998. [10] H. Kim, J. Kim and Y. Eo, 'Broadband thin-film transmission-line characterization for accurate high-frequency measurements of on-wafer components,' in IEEE Transactions on Microwave Theory and Techniques, vol. 64, no. 3, pp. 931-938, March 2016. [11] S. K. Kwok, K. F. Tsang, and Y. L. Chow, “A novel capacitance formula of the microstrip line using synthetic asymptote,” Microwave and Optical Technology Letters, vol. 36, no. 5, pp. 327-330, March 2003. [12] Longzhu Cai. “UGCPW structure-based embedded resonator with high quality factor for microwave substrate characterization,” MDPI Electronics, vol. 10, no. 2, pp. 113, January 2021. doi: 10.3390/electronics10020113 [13] S. H. Hall and H. L. Heck, Advanced Signal Integrity for High-Speed Digital System Design. Wiley, 2009. [14] James R. Baker-Jarvis, Michael D. Janezic, Billy F. Riddle, Christopher L. Holloway, Nicholas Paulter, J Blendell, Dielectric and Conductor-Loss Characterization and Measurements on Electronic Packaging Materials, NIST Pubs. pp.17-50, July 2001. [15] Non-haloganated Low CTE BT Resin Laminate for IC Plastic Packages. [Online]. Available: https://www.mgc.co.jp/eng/products/sc/btprint/lineup/hfbt.html [16] TAIWAN TAIYO INK CO. [Online]. Available: https://www.taiyoink.com.tw/en-products/ [17] Transmission-Line Calculator. [Online]. Available: https://www.cadence.com/zh_TW/home/tools/system-analysis/rf-microwave-design/awr-tx-line.html [18] Smooth function. [Online]. Available: https://www.mathworks.com/help/curvefit/smooth.html [19] PCB Surface Finished. [Online]. Available: https://www.cheer-time.com.tw/index.php?view=custom1&d=31 [20] T. Okubo, T. Sudo, T. Hosoi, H. Tsuyoshi and F. Kuwako, 'Signal transmission loss on printed circuit board in GHz frequency region,' 2013 IEEE Electrical Design of Advanced Packaging Systems Symposium (EDAPS), Nara, December 2013, pp. 112-115. doi: 10.1109/edaps.2013.6724382 [21] Constantine A. Balanis, Antenna Theory analysis and design, 3rd edition, John Wiley & Sons. 2005. [22] J. Huang, “Microstrip Antennas:Analysis, Design and Applications”, Chapter 4 in Modern Antenna Handbook, Edited by Constantine A. Balanis, John Wiley & Sons, Inc. 2008. [23] Andy Vesa, Florin Alexa and Horia Baltă, “Comparisons between 2D and 3D uniform array antennas”, in IEEE ACSIS, Vol. 5, Computer Science and Information Systems, pp. 1285–1290, October 2015. doi: 10.15439/2015F266 [24] Altera Corporation, Application Note AN-528-1.1, “PCB dielectric material selection and fiber weave effect on high-speed channel routing”, January 2011. [25] G. F. Engen and C. A. Hoer, 'Thru-Reflect-Line:An improved technique for calibrating the dual six-port automatic network analyzer,' in IEEE Transactions on Microwave Theory and Techniques, vol. 27, no. 12, pp. 987-993, Dec. 1979. [26] R. S. Elliott, Antenna Theory and Design, revised edition. IEEE Press Series, Wiley-InterScience, 2003 [27] End Launch Connectors. [Online]. Available: https://mpd.southwestmicrowave.com/product-category/end-launch-connectors/ | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/84551 | - |
dc.description.abstract | 本論文的研究內容分成二部分,第一部分為利用傳輸線來萃取板材介電常數及正切損耗,第二部分為貼片天線模擬及量測。 第一部分使用微帶線與GCPW兩種傳輸線,再利用廣義TRL的方式,計算矩陣特徵值,再運用長短傳輸線法計算衰減常數(α)與相位常數(β),由於這兩種傳輸線在高頻下並沒有相關的數學式可以由α及β推導至ε及tanδ,所以本文使用Ansys研發的高頻結構模擬器(high frequency structure simulator, HFSS)模擬,藉由調整HFSS中的ε及tanδ使得模擬中的α及β與量測相同,來萃取高頻板材參數。也討論影響介電常數及正切損耗的因素。PCB電路板時常為了保護電路會使用防焊油墨及表面處理(surface finished),本文也將會討論加入防焊油墨及表面處理後對傳輸線的電氣特性的影響,也將此兩種情況下的傳輸線進行防焊油墨的材料萃取及經過表面處理後的傳輸線板材萃取。量測部分利用欣興電子的載板製程,使用MGC的HL972LF(LD)作為基板材料及Taiyo AUS SR1作為防焊油墨材料進行萃取。不同種的傳輸線對於萃取板材的結果有些不同,微帶線所萃取出來的偏高,而GCPW所萃取出來的偏低,二種傳輸線萃取出來的ε差異約在2%左右,與板材廠商所提供的量測結果來看在頻率10GHz的板材參數,微帶線所萃取出的結果較GCPW較準。防焊油墨的ε萃取兩傳輸線的萃取結果都偏低,表面處理對於萃取影響不大。 第二部分將會介紹天線的相關理論及設計以及饋入端的設計,並且進行模擬與量測2×2貼片天線,並且討論量測及模擬上的誤差。 | zh_TW |
dc.description.abstract | This thesis is divided into two parts. The first part is to extract the dielectric constant and loss tangent by using the transmission lines. The second part is the simulation and measurement, of patch antenna. The first part uses two transmission lines, microstrip line and GCPW, and then uses the generalized TRL method to calculate the matrix eigenvalues, and then uses the long and short transmission line method to calculate the attenuation constant(α) and phase constant(β). Since these two transmission lines don't have equations to relate α and β to ε and tanδ, so this thesis uses the high frequency structure simulator (HFSS) developed by Ansys to simulate, compare the simulation with the measurement, and then extract the ε and tanδ from S-parameters. This thesis also explains the factors affecting the dielectric constant and loss tangent extraction and analyzes different results from different transmission lines. The influence of solder mask and surface finished on the electrical characteristics of the transmission line are also disussed. The fabrication of carrier is provided by Unimicron. The material used is MGC's HL972LF (LD) as the substrate material and Taiyo AUS SR1 as the solder mask material of the carrier board. The difference on extracted ε from two transmission lines is about 2%. The second part will introduce the theory and design of the patch antenna, and simulation and measurement of the 2×2 patch antenna array. | en |
dc.description.provenance | Made available in DSpace on 2023-03-19T22:15:20Z (GMT). No. of bitstreams: 1 U0001-1109202206213300.pdf: 16359066 bytes, checksum: bb8b263361a37a10be14583e97ac1283 (MD5) Previous issue date: 2022 | en |
dc.description.tableofcontents | 口試委員會審定書 # 中文摘要 i ABSTRACT iii 目錄 iv 圖目錄 vi 表目錄 ix Chapter 1 簡介 1 1.1 研究動機 1 1.2 高頻電路板材 1 1.3 AiP (Antenna-in-Package)天線封裝 2 1.4 各章節簡介 3 Chapter 2 平面型傳輸線概論 4 2.1 微帶傳輸線 4 2.2 共地共平面波導 7 Chapter 3 散射矩陣校準 9 3.1 TRL介紹 9 3.1.1 廣義TRL 12 3.2 特徵阻抗萃取 16 Chapter 4 介電常數萃取模擬與量測結果 19 4.1 板材參數推導 19 4.1.1 長短傳輸線長度差 19 4.1.2 正切損耗 20 4.2 萃取方法 22 4.2.1 共振法 22 4.2.2 微帶線環形諧振器測試方法 23 4.2.3 傳輸線法 23 4.2.4 電容萃取法 24 4.3 微帶線萃取方法與步驟 24 4.4 共地共平面波導萃取方法與步驟 26 4.5 防焊油墨萃取方法與步驟 29 4.6 傳輸線設計 33 4.6.1 微帶線設計 33 4.6.2 GCPW設計 38 4.7 萃取結果 43 4.7.1 微帶線萃取結果 44 4.7.2 GCPW萃取結果 48 4.7.3 防焊油墨萃取結果 51 4.7.4 比較與討論 57 Chapter 5 傳輸線表面處理模擬與量測 59 5.1 傳輸線表面處理介紹 59 5.2 傳輸線表面處理模擬與量測 62 Chapter 6 AiP貼片天線設計模擬與量測結果 68 6.1 貼片天線 68 6.1.1 天線饋入端設計 70 6.2 天線模擬結果 72 6.2.1 貼片天線模擬結果 72 6.2.2 陣列天線模擬結果 74 6.3 2×2陣列天線量測結果與討論 77 6.4 板材參數對貼片天線的影響 82 Chapter 7 結論與未來展望 85 參考文獻 87 | |
dc.language.iso | zh-TW | |
dc.title | Ka-頻段天線系統封裝基板材料特性萃取及貼片天線設計 | zh_TW |
dc.title | Antenna-in-Package substrate dk/df extraction and patch antenna design at Ka-band | en |
dc.type | Thesis | |
dc.date.schoolyear | 110-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 陳晏笙(Yen-Sheng Chen),黃建彰(Chien-Chang Huang) | |
dc.subject.keyword | 微帶線,接地共面波導,TRL,散射參數矩陣,正切損耗,介電常數,貼片天線, | zh_TW |
dc.subject.keyword | Microstrip,grounded coplanar waveguide,TRL,scattering parameters,loss tangent,dielectric constant,patch antenna, | en |
dc.relation.page | 89 | |
dc.identifier.doi | 10.6342/NTU202203278 | |
dc.rights.note | 同意授權(限校園內公開) | |
dc.date.accepted | 2022-09-23 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
dc.date.embargo-lift | 2022-09-30 | - |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
U0001-1109202206213300.pdf 授權僅限NTU校內IP使用(校園外請利用VPN校外連線服務) | 15.98 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。