請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/8049
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 謝國煌 | |
dc.contributor.author | Shao-Cheng Wang | en |
dc.contributor.author | 王紹誠 | zh_TW |
dc.date.accessioned | 2021-05-19T18:04:23Z | - |
dc.date.available | 2022-07-20 | |
dc.date.available | 2021-05-19T18:04:23Z | - |
dc.date.copyright | 2012-07-27 | |
dc.date.issued | 2012 | |
dc.date.submitted | 2012-07-20 | |
dc.identifier.citation | 1. 張國財,環保包裝的外衣水性印刷,永續產業發展雙月刊,2004,第13期,
p.31 2. 謝莉莉,陳合進,王明堂,環保印刷材料之探討,永續產業發展雙月刊,2007, 第31期,pp.18 3. C.-Y. Bai, X.-Y. Zhang, J.-B. Dai, “Effect of the hard segment on the properties of UV curable waterborne blocked polyurethanes”, Journal of Polymer Research, 2008, Vol. 15, pp.67. 4. 柯揚船、皮特•斯壯主編,陳憲偉校訂,聚合物-無機奈米複合材料,台北,五南圖書,2004 5. M.W. Daniels, L.F, Francis, “Silane Adsorption Behavior, Microstructure, and Properties of Glycidoxypropyltrimethoxysilane-Modified Colloidal Silica Coatings”, Journal of Colloid and Interface Science, 1998, Vol. 205, pp. 191. 6. Medford, F. George, US patent 5607729, 1997. 7. Y.Y. Yu, C.Y. Chen, W.C. Chen , “Synthesis and characterization of organic – inorganic hybrid thin films from poly(acrylic) and monodispersed colloidal silica”, Polymer, 2003, Vol. 44, pp. 593. 8. G. Odian, “Principles of polymerization”, John Wiley & Sons, Inc. 2004, 4th ed. 9. S. Carraher著,薛敬和譯,高分子化學,高立出版社,2000,3rd ed.,pp. 367 10. C. Decker, K. Zahouily, D. Decker, T. Nguyen and V. Thi, “Performance of acylpphosphine oxides in photoinitiated polymerization”, Polymer, 2001, Vol. 42, pp. 7551. 11. J. Segurola, N. S. Allen, M. Edge, A. McMahon and S. Wilson, “Photoyellowing and discolouration of UV cured acrylated clear coatings systems: influence of photoinitiator type”, Polymer Degradation and Stability, 1999, Vol. 64, pp. 39. 12. L. Li and J. E. Morris, “Electrical Conduction Models for Isotropically Conductive Adhesive Joints”, IEEE Transactions on Components, Packaging, and Manufacturing Technology-Part A, 1997, Vol. 20, pp. 3. 13. D. Lu and C. P. Wong, “Effects of Shrinkage on Conductivity of Isotropic Conductive Adhesives”, International Journal of Adhesion & Adhesives, 2000”, Vol. 20, pp.189. 14. L. Ye, Z. Lai and J. Liu, “Effect of Ag Particle Size on Electrical Conductivity of Isotropically Conductive Adhesives”, IEEE Transactions on Electronics Packaging Manufacturing, 1999, Vol. 22, 15. S.P. Pappas, “UV curing: science and technology Vol. II”, 1985, Technology Marketing Corporation, pp. 4. 16. J.P. Fouassier, “Photoinitiation, photopolymerization, and photocuring: fundamentals and application”, Hanser publishers, Munich Vienna New York, 1995. 17. C. Decker, A.D. Jenkins, “Kinetic approach of oxygen inhibition in ultraviolet- and laser-induced polymerizations”, Macromolecules, 1985, Vol. 18, pp. 1241. 18. C. Decker, J. Faure, M. Fizet, L. Rychla, “Elimination of oxygen inhibition in photopolymerization”, Photographic Science and Engineering, 1979, Vol. 23, pp. 137. 19. C.W. Miller, C.E. Hoyle, S. Jonsson, C. Nason, T.Y. Lee, W.F. Kuang, et al., In: Belfield KD, Crivello JV, editors, “Photoinitiated polymerization”, Oxford: University Press, 2003. 20. V.V. Krongauz, C.P. Chawla, J. Dupre, In: K.D. Belfield, J.V. Crivello, editors, “Photoinitiated polymerization”, Oxford: University Press, 2003. 21. J.G. Kloosterboer, “Advances in polymer science”, New York: Springer-Verlag, 1988, pp. 1. 22. N.B. Cramer, C.P. O'Brien, and C.N. Bowman, “Mechanisms, polymerization rate scaling, and oxygen inhibition with an ultra-rapid monovinyl urethane acrylate”, Polymer, 2008, Vol. 49, pp. 4756. 23. J. Jansen, A.A. Dias, M. Dorschu, B. Coussens, “Effect of Dipole Moment on the Maximum Rate of Photoinitiated Acrylate Polymerizations”, Macromolecules, 2002, Vol. 35, pp. 7529. 24. J. Jansen, A.A. Dias, M. Dorschu, B. Coussens, “Fast Monomers: Factors Affecting the Inherent Reactivity of Acrylate Monomers in Photoinitiated Acrylate Polymerization”, Macromolecules, 2003, Vol. 36, pp. 3861. 25. H. Kilambi, J.W. Stansbury, C.N. Bowman, “Deconvoluting the Impact of Intermolecular and Intramolecular Interactions on the Polymerization Kinetics of Ultrarapid Mono(meth)acrylates”, Macromolecules, 2007, Vol. 40, pp. 47. 26. E.R. Beckel, J.W. Stansbury, C.N. Bowman, “Evaluation of a Potential Ionic Contribution to the Polymerization of Highly Reactive (Meth)acrylate Monomers”, Macromolecules, 2005, Vol. 38, pp. 9474. 27. C. Decker, K. Moussa, “A New Class of Highly Reactive Acrylic-Monomers. 1. Light-Induced Polymerization”, Makromolekulare Chemie-Rapid Communications, 1990, Vol. 11, pp. 159. 28. C. Decker, K. Moussa, “A New Class of Highly Reactive Acrylic-Monomers. 2. Light-Induced Copolymerization with Difunctional Oligomers”, Makromolekulare Chemie-Macromolecular Chemistry and Physics, 1991, Vol. 192, pp. 507. 29. K. Moussa, C. Decker, “Lightly-Induced Polymerization of New Highly Reactive Acrylic-Monomers”, Journal of Polymer Science Part A-Polymer Chemistry, 1993, Vol. 31, pp. 2197. 30. J.C. Brosse, S. Chevalier, D. Couvret, C. Decker, K. Moussa, Fr. Patent 89.08651, 1989. 31. K.A. Berchtold, J. Nie, J.W. Stansbury, B. Hacioglu, E.R. Beckel, C.N. Bowman, “Novel Monovinyl Methacrylic Monomers Containing Secondary Functionality for Ultrarapid Polymerization: Steady-State Evaluation”, Macromolecules, 2004, Vol. 37, pp. 3165. 32. H. Kilambi, E.R. Beckel, K.A. Berchtold, J.W. Stansbury, C.N. Bowman, “Influence of molecular dipole on monoacrylate monomer reactivity”, Polymer, 2005, Vol. 46, pp. 4735. 33. H. Zhou, Q. Li, T.Y. Lee, C.A. Guymon, E.S. Jonsson, C.E. Hoyle, “Photopolymerization of Acid Containing Monomers: Real-Time Monitoring of Polymerization Rates”, Macromolecules, 2006, Vol. 39, pp. 8269. 34. T.Y. Lee, T.M. Roper, E.S. Jonsson, C.A. Guymon, C.E. Hoyle, “Influence of Hydrogen Bonding on Photopolymerization Rate of Hydroxyalkyl Acrylates” Macromolecules, 2004, Vol. 37, pp. 3659. 35. J. Jansen, A.A. Dias, M. Dorschu, B. Coussens, “Effect of preorganization due to hydrogen bonding on the rate of photoinitiated acrylate polymerization”, Photoinitiated Polymerization, 2003, Vol. 847, pp. 127. 36. H. Kilambi, S.K. Reddy, E.R Beckel., J.W. Stansbury, C.N. Bowman, “Influence of Secondary Functionalities on the Reaction Behavior of Monovinyl (Meth)Acrylates”, Chemistry of Materials, 2007, Vol. 19, pp. 641. 37. 劉建良,UV curing發展簡介與應用,化工科技與商情,2003,第41期,pp.1 38. 張上鎮,紫外光硬化塗料與塗裝(1),塗料與塗裝技術,2003,第21期,pp.22-30 39. 宋維孝,「UV 硬化塗料/印墨最近動向」,高分子工業,2002,第4期,pp.23 40. C.G. Roffey, “Photopolymerization of Surface Coating”, John Wiley& Sons, 1982, pp.161. 41. Norman S. Allen, “Developments in Polymer Photochemistry”, Applied Science Publisher, 1982. 42. 陳奇毅,UV Curable PU 樹脂於不同波長之反應性探討,碩士論文,國立臺北科技大學有機高分子研究所,2002。 43. 蔣孝澈,溶凝膠製作與應用專輯, 化工,1999,第41期,pp. 12 44. J.D. Wright, N.A. Sommerdijk, “Sol-gel materials: chemistry and applications”, Taylor & Francis Books Ltd., 2003, pp. 1. 45. Hua Zou, Shishan Wu, Jian Shen, “Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications”, Chemical Reviews, 2008, Vol. 108, pp. 3893. 46. C. J. Brinker, G. W. Scherer., “ Sol-gel Science: the physics and chemistry of sol-gel processing ”, Academic Press, Inc., 1990. 47. B.K. Coltrain, S.M. Melpolder, J.M. Salva, in: D.R. Uhlman and D.R. Ulrich (Eds.), “Ultraprocessing of Ceramics, Glasses and Composites”, Wiley and Sons, 1992, pp. 69. 48. 詹佳樺,溶膠-凝膠法製備聚甲基丙烯酸甲酯/二氧化矽混成體之研究,國立中央大學化學工程研究所碩士論文,2001. 49. G. Philipp, H. Schmidt, “New materials for contact lenses prepared from Si and Ti-alkoxides by the sol-gel process”, Journal of Non-Crystalline Solids,1984, Vol.63, pp. 283. 50. G.L. Wikers, B. Orler, H. Huang, “New Type of Non-Crystalline Solids Between Inorganic and Organic Materials”, Polymeric Preprints, 1985, Vol. 26, pp. 300. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/8049 | - |
dc.description.abstract | 本研究探討紫外光可硬化聚胺酯壓克力樹脂/二氧化矽混成材料應用於硬型保護塗層,以期達到高硬度、高黏著力且高穿透度之性能。經由改變Tetraethoxysilane (TEOS)與3-(trimethoxysilyl) propylmethacrylate (MSMA)的莫耳比例所得到的二氧化矽粒子與與改變樹脂與二氧化矽的比例對塗層硬度、黏著力、熱性質與穿透度之影響。
無機粒子方面,利用溶膠-凝膠法所得到之二氧化矽粒子,粒徑為14奈米。經由MSMA改質後,使其表面帶有壓克力官能基,以晶鏡有機和無基見面的相容性,且粒徑最多增加至27奈米。傅立葉轉換紅外線光譜儀、和動態雷射光散射粒徑儀為此判斷的依據。 樹脂方面,本研究合成一系列胺酯壓克力樹脂,並與自行合成之二氧化系混合並加入I 184後得到紫外光可硬化聚胺酯壓克力樹脂/二氧化矽混成塗料,經由添加二氧化矽後,於PET基材上,數種配方的鉛筆硬度最高可達7H。胺酯壓克力中的胺酯鍵結,可以改善因為加入過多的二氧化矽造成黏著力下降之現象。由SEM可知MSMA的量對於二氧化矽於樹脂中的分散有很大的影響,在高二氧化矽添加量下,足夠的MSMA才能維持好的分散效果。 | zh_TW |
dc.description.abstract | In this study, a series of urethane acrylate/silica hbrid hard coating were developed. This coating was designed to be with performance of high pencil hardness, high adhesion and high transmittance. We could find the influences of the molar ratio of Tetraethoxysilane (TEOS) to 3-(trimethoxysilyl) propylmethacrylate (MSMA) and the weight ration of resin to silica on pencilhardness, adhesion, thermal property and transmittance.
The silica particle were synthesized by sol-gel process. The size of silica particle was 14nm. The silica spheres weresuccessfully modified by MSMA, and the acrylate functional groups were chemically bonded tothe surface of silica spheres, in order to enhance the compatibility oforganic and inorganic interface. FT-IR and DLS were employed tocharacterize the modification of the silica spheres. A series of urethane acrylate resins were synthesized. The UV-curable poly (urethane acrylate)/silica hybrid hard coatings were composed of urethane acrylates , modified silica particles and I 184. By adding silica particle, some formulae of coating could reach 7H pencil hardness on PET substrate. The urethane linkage of urethane acrylates could improve the poor adhesion, which resulted from adding too much silica. By SEM, we could find the influence of the amound of MSMA on the dispersity of silica in resins. At hight loading of silica, it needed enough MSMA to make silica disperse well in hybrid materials. | en |
dc.description.provenance | Made available in DSpace on 2021-05-19T18:04:23Z (GMT). No. of bitstreams: 1 ntu-101-R99524029-1.pdf: 4609083 bytes, checksum: 96523e4c59dabd5d4e16fdb400ea94f1 (MD5) Previous issue date: 2012 | en |
dc.description.tableofcontents | 中文摘要....................................................I
Abstract..................................................II 目錄.....................................................III 表目錄.....................................................VI 圖目錄...................................................VIII 第一章 緒論...............................................1 1-1前言....................................................1 1-2研究目的.................................................2 第二章 文獻回顧............................................3 2-1 紫外光聚合..............................................3 2-1-1 自由基聚合原理.........................................3 2-1-2 光聚合原理............................................5 2-1-3 紫外光可硬化樹酯........................................7 2-1-4 紫外光可硬化樹酯組成....................................8 2-2 溶膠-凝膠法............................................11 2-2-1 溶膠-凝膠法簡介.......................................11 2-2-2 矽烷氧化合物種類的影響.................................13 2-2-3 水量的影響...........................................14 2-2-4 pH值的影響...........................................15 2-2-5 溶劑的影響...........................................16 2-3 有機/無機混成材料........................................17 2-3-1 二氧化矽粒子表面改質...................................18 2-3-2 壓克力-二氧化矽混成材料.................................19 第三章 實驗方法與原理......................................20 3-2 實驗儀器...............................................23 3-3 實驗流程與步驟..........................................25 3-3-1 樹脂之製備...........................................25 3-3-2 二氧化矽膠體粒子之製備..................................30 3-3-3 紫外光可硬化聚胺酯壓克力/二氧化矽混成硬型保護薄膜之製備.......31 3-4 材料之分析與測試.........................................35 3-4-1 傅立葉紅外線光譜分析測試................................35 3-4-2 百格測試.............................................36 3-4-3 鉛筆硬度測試..........................................37 3-4-4 熱重損失分析儀測試.....................................37 3-4-5 微差掃描卡計儀分析測試..................................38 3-4-6 紫外光-可見光光譜儀分析測試.............................38 3-4-7 動態光散射雷射粒徑儀分析測試.............................38 3-4-8 掃瞄式電子顯微鏡分析測試................................38 第四章 結果與討論.........................................39 4-1 樹脂之合成分析..........................................39 4-1-1 IPHEA樹脂之合成分析(HEA-IPDI-HEA).....................39 4-1-2 IPPETA樹脂之合成分析(PETA-IPDI-PETA)..................40 4-1-3 EHIPEA樹脂之合成分析(EHOH-IPDI-HEA)...................40 4-1-4 IP1KTA樹脂之合成分析(PETA-IPDI-PEMO 1000-IPDI-PETA)...41 4-2 改質二氧化矽膠體粒子之分析................................42 4-3 二氧化矽混成硬型保護塗層之分析.............................45 4-3-1 百格測試.............................................45 4-3-2 鉛筆硬度測試 ..........................................51 4-3-3 熱重損失分析儀測試.....................................56 4-3-4 微差掃描卡計儀分析測試 ..................................69 4-3-5 紫外光-可見光光譜儀分析測試.............................75 4-3-6 掃瞄式電子顯微鏡分析測試................................88 第五章 結論..............................................93 參考文獻...................................................94 | |
dc.language.iso | zh-TW | |
dc.title | 紫外光可硬化聚胺酯壓克力/二氧化矽混成材料應用於硬型保護塗層 | zh_TW |
dc.title | UV-Curable Poly (Urethane Acrylate)/Silica Hybrid Materials for Hard Coating Application | en |
dc.type | Thesis | |
dc.date.schoolyear | 100-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 邱文英,韓錦鈴,黃智楷 | |
dc.subject.keyword | 紫外光可硬化,聚胺酯壓克力,溶膠-凝膠法,混成,硬型保護塗層, | zh_TW |
dc.subject.keyword | UV-curable,Urethane acrylate,Sol-gel process,Hybrid,Hard coating, | en |
dc.relation.page | 98 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2012-07-20 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf | 4.5 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。