請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/8009
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 許博文 | |
dc.contributor.author | Yen-Ju Lu | en |
dc.contributor.author | 呂彥儒 | zh_TW |
dc.date.accessioned | 2021-05-19T18:02:33Z | - |
dc.date.available | 2024-12-30 | |
dc.date.available | 2021-05-19T18:02:33Z | - |
dc.date.copyright | 2014-08-26 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-08-15 | |
dc.identifier.citation | [1] C. P. Wen, “Coplanar waveguide: a surface strip transmission line suitable for nonreciprocal gyromagnetic device applications,” IEEE Trans. Microw. Theory Tech., vol. MTT-17, no. 12, pp. 1087–1090, Dec. 1969.
[2] R. N. Simons, Coplanar Waveguide Circuits, Components, and Systems. New York: John Wiley & Sons, 2001. [3] W. R. Deal, R. Tsai, M. D. Lange, J. B. Boos, B. R. Bennett, and A. Gutierrez, “A W-band InAs/AlSb low-noise/low-power amplifier,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 4, pp. 208–210, Apr. 2005. [4] A. Tessmann, I. Kallfass, A. Leuther, H. Massler, M. Kuri, M. Riessle, M. Zink, R. Sommer, A. Wahlen, H. Essen, V. Hum, M. Schlechtweg, and O. Ambacher, “Metamorphic HEMT MMICs and modules for use in a high-bandwidth 210 GHz radar,” IEEE J. Solid-State Circuits, vol. 43, no. 10, pp. 2194–2205, Oct. 2008. [5] R. N. Simons and S. R. Taub, “Coplanar waveguide radial line double stub and application to filter circuits,” Electron. Lett., vol. 29, no. 17, pp. 1584–1586, Aug. 1993. [6] S.-N. Lee, J.-I. Lee, Y.-J. Kim, and J.-G. Yook, “Miniaturized CBCPW bandpass filter based on thin film polyimide on lossy silicon,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 10, pp. 546–548, Oct. 2006. [7] M. Nedil, A. Djaiz, and T.A. Denidni, “Ultra-wideband bandpass filter using back-to-back CBCPW-to-CBCPW transition,” Electron. Lett., vol. 44, no. 5, pp. 362–363, Feb. 2008. [8] Z. Yin and Z. Shao, “Design of a novel CBCPW-bandpass filter by using U-slot DGSs,” in Proc. Int. Conf. Computational Problem-Solving, Lijiang, China, Dec. 2010, pp. 293–295. [9] J.-P. Raskin, G. Gauthier, L. P. Katehi, and G. M. Rebeiz, “Mode conversion at GCPW-to-microstrip-line transitions,” IEEE Trans. Microw. Theory Tech., vol. 48, no. 1, pp. 158–161, Jan. 2000. [10] R. Phltorak and M. Kitlinski, “Some remarks on the design of microstrip to coplanar line transformer,” in Proc. Int. Conf. Microw., Radar and Wireless Comm., Warsaw, Poland, May 2004, pp. 836–839.. [11] Y. C. Lee and C. S. Park, “A compact and low-radiation CPW probe pad using CBCPW-to-microstrip transitions for V-band LTCC applications,” IEEE Trans. Adv. Packag., vol. 30, no. 3, pp. 566–569, Aug. 2007. [12] H.-H. Lee and J.-Y. Park, “Characterization of fully embedded RF inductors in organic SOP technology,” IEEE Trans. Adv. Packag., vol. 32, no. 2, pp. 491–496, May. 2009. [13] D.-H. Kwon, “A wideband balun and vertical transition between conductor-backed CPW and parallel-strip transmission line,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 4, pp. 152–154, Apr. 2006. [14] C.-F. Hung, A.-S. Liu, C.-H. Chien, C.-L. Wang, and R.-B. Wu “Bandwidth enhancement on waveguide transition to conductor backed CPW with high dielectric constant substrate,” IEEE Microw. Wireless Compon. Lett., vol. 15, no. 2, pp. 128–130, Feb. 2005. [15] W.-J. Lu, Y.-M. Bo, and H.-B. Zhu, “A broadband transition design for a conductor-backed coplanar waveguide and a broadside coupled stripline,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 1, pp. 10–12, Jan. 2012. [16] J. J. Lee, K. C. Eun, D. Y. Jung, and C. S. Park, “A novel GCPW to rectangular waveguide transition for 60 GHz applications,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 2, pp. 80–82, Feb. 2009. [17] H. Aliakbarian, S. Radiom, V. Tavakol, P. Reynaert, B. Nauwelaers, G.A.E. Vandenbosch, and G. Gielen, “Fully micromachined W-band rectangular waveguide to grounded coplanar waveguide transition,” IET Microw. Antennas Propag. , vol. 6, no. 3, pp. 533–540, Apr. 2012. [18] I. Flammia, A. Stohr, C.C. Lenonhardt, J. Honecker, and A.G. Steffan, “71–76 GHz grounded CPW to WR-12 transition for quasi-hermetic RoF wireless transmitter,” Electron. Lett., vol. 48, no. 9, pp. 506–508, Apr. 2012. [19] X.-P. Chen and K. Wu, “Low-loss ultra-wideband transition between conductor-backed coplanar waveguide and substrate integrated waveguide,” in IEEE MTT-S Int. Microw. Symp. Dig., Boston, USA, Jun. 2009, pp. 349–352. [20] R.-Y. Fang, C.-F. Liu, and C.-L. Wang, “Compact and broadband CB-CPW-to-SIW transition using stepped-impedance resonator with 90°-bent slot,” IEEE Trans. Compon., Packag., Manuf. Technol., vol. 3, no. 2, pp. 247–252, Feb. 2013. [21] Y. J. Cheng, X. Y. Bao, Y. X. Guo, “LTCC-based substrate integrated image guide and its transition to conductor-backed coplanar waveguide,” IEEE Microw. Wireless Compon. Lett., vol. 23, no. 9, pp. 450–452, Sep. 2013. [22] I. Flammia, B. Khani, S. Arafat, and A. Stohr, “60 GHz grounded-coplanar-waveguide-to-substrate-integrated-waveguide transition for RoF transmitters,” Electron. Lett., vol. 50, no. 1, pp. 34–35, Jan. 2014. [23] C. E. Bassey and G. R. Simpson, “A comparison of the coplanar waveguide (CPW) and conductor-backed coplanar waveguide (CBCPW) for use as aircraft ice sensors,” in Proc. IEEE AP-S Int. Symp., Albuquerque, USA, Jul. 2006, pp. 821–824. [24] C. Veyres and V. F. Hanna, “Extension of the application of conformal mapping techniques to coplanar lines with finite dimensions,” Int. J. Electron., vol. 48, no. 1, pp. 47–56, Jan. 1980. [25] Y. C. Shih and T. Itoh, “Analysis of conductor-backed coplanar waveguide,” Electron. Lett., vol. 18, no. 12, pp. 538–540, Jun. 1982. [26] R. W. Jackson, “Considerations in the use of coplanar waveguide for millimeter-wave integrated circuits,” IEEE Trans. Microw. Theory Tech., vol. MTT-34, no. 12, pp. 1450–1456, Dec. 1986. [27] H. Shigesawa, M. Tsuji, and A. A. Oliner, “Conductor-backed slot line and coplanar waveguide: dangers and full-wave analysis,” in IEEE MTT-S Int. Microw. Symp. Dig., New York, USA, May 1988, pp. 199–202. [28] L.-M. Chou, R. G. Rojas, and P. H. Pathak, “A WH/GSMT based full-wave analysis of the power leakage from conductor-backed coplanar waveguides,” in IEEE MTT-S Int. Microw. Symp. Dig., Albuquerque, USA, Jun. 1992, pp. 219–222. [29] W. E. McKinzie and N. G. Alexopoulos, “Leakage losses for the dominant mode of conductor-backed coplanar waveguide,” IEEE Microw. Guided Wave Lett., vol. 2, no. 2, pp. 65–66, Feb. 1992. [30] K. Beilenhoff and W. Heinrich, “Excitation of the parasitic parallel-plate line mode at coplanar discontinuities,” in IEEE MTT-S Int. Microw. Symp. Dig., Denver, USA, Jun. 1997, pp. 1789–1792. [31] M. Riaziat, I. J. Feng, R. Majidi-Ahy, and B. A. Auld, “Single-mode operation of coplanar waveguides,” Electron. Lett., vol. 23, no. 24, pp. 1281–1283, Nov. 1987. [32] R. W. Jackson, “Mode conversion at discontinuities in finite-width conductor-backed coplanar waveguide,” IEEE Trans. Microw. Theory Tech., vol. 37, no. 10, pp. 1582–1589, Oct. 1989. [33] C.-C. Tien, C.-K. C. Tzuang, S. T. Peng, and C.-C. Chang, “Transmission characteristics of finite-width conductor-backed coplanar waveguide,” IEEE Trans. Microw. Theory Tech., vol. 41, no. 9, pp. 1616–1624, Sep. 1993. [34] C.-C. Tien, C.-K. C. Tzuang, and S. T. Peng, “Effect of finite-width backside plane on overmoded conductor-backed coplanar waveguide,” IEEE Microw. Guided Wave Lett., vol. 3, no. 8, pp. 259–261, Aug. 1993. [35] W.-T. Lo, and C.-K. C. Tzuang, S.-T. Peng, C.-C. Tien, C.-C. Chang, and J.-W. Huang, “Resonant phenomena in conductor-backed coplanar waveguides (CBCPW’s),” IEEE Trans. Microw. Theory Tech., vol. 41, no. 12, pp. 2099–2108, Dec. 1993. [36] W. H. Haydl, “Resonance phenomena and power loss in conductor-backed coplanar structures,” IEEE Microw. Guided Wave Lett., vol. 20, no. 12, pp. 514–516, Dec. 2000. [37] R. N. Simons, G. E. Ponchak, K. S. Martzaklis, and R. R. Romanofsky, “Channelized coplanar waveguide: discontinuities, junctions, and propagation characteristics,” in IEEE MTT-S Int. Microw. Symp. Dig., Long Beach, USA, Jun. 1989, pp. 915–918. [38] R. N. Simons and G. E. Ponchak, “Coax-to-channelised coplanar waveguide in-phase n-way, radial power divider,” Electron. Lett., vol. 26, no. 11, pp. 754–756, May 1990. [39] R. N. Simons, “New channelised coplanar waveguide to rectangular waveguide post and slot couplers,” Electron. Lett., vol. 27, no. 10, pp. 856–858, May. 1991. [40] C.-C. Tien, C.-K. C. Tzuang, and J. Monroe, “Effect of lateral walls on the propagation characteristics of finite-width conductor-backed coplanar waveguides,” Electron. Lett., vol. 29, no. 15, pp. 1357–1358, Jul. 1993. [41] J.-G. Yook, N. I. Dib, and L. P. B. Katehi, “Characterization of high frequency interconnects using finite difference time domain and finite element methods,” IEEE Trans. Microw. Theory Tech., vol. 42, no. 9, pp. 1727–1736, Sep. 1994. [42] N. K. Das, “Two conductor-backed configurations of slotline or coplanar waveguide for elimination or suppression of the power-leakage problem,” in IEEE MTT-S Int. Microw. Symp. Dig., San Diego, USA, May. 1994, pp. 153–156. [43] N. K. Das, “Methods of suppression or avoidance of parallel-plate power leakage from conductor-backed transmission line,” IEEE Trans. Microw. Theory Tech., vol. 44, no. 2, pp. 169–181, Feb. 1996. [44] J. M. Johnson and Y. Rahmat-Samii, “The tab monopole,” IEEE Trans. Antennas Propag., vol. 45, no. 1, pp. 187–188, Jan. 1997. [45] G. E. Ponchak, D. Chun, J.-G. Yook, and L. P. B. Katehi, “The use of metal filled via holes for improving isolation in LTCC RF and wireless multichip packages,” IEEE Trans. Adv. Packag., vol. 23, no. 1, pp. 88–99, Feb. 2000. [46] W. H. Haydl, “On the use of vias in conductor-backed coplanar circuits,” IEEE Trans. Microw. Theory Tech., vol. 50, no. 6, pp. 1571–1577, Jun. 2002. [47] D. Deslandes and Ke Wu, “Analysis and design of current probe transition from grounded coplanar to substrate integrated rectangular waveguides,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 8, pp. 2487–2494, Aug. 2005. [48] C. T.H. Lim, A. Ali, and J. S. Fu, “A broadband printed triangular monopole,” in Proc. Asia-Pacific Microw. Conf., Suzhou, China, Dec. 2005. [49] K. Ma, J. Ma, M. A. Do, and K. S. Yeo, “Experimentally investigating slow-wave transmission lines and filters based on conductor-backed CPW periodic cells,” in IEEE MTT-S Int. Microw. Symp. Dig., Long Beach, USA, Jun. 2005, pp. 1653–1656. [50] J. H. Choi and P. Russer, “The picosecond pulse transmission on the conductor-backed coplanar waveguide with via holes,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 7, pp. 419–421, Jul. 2006. [51] M. A. Habib, M. Nedil, and T. A. Denidni, “Radiation efficiency enhancement of slot antenna using EBG-pin inclusion,” in Proc. IEEE AP-S Int. Symp., Albuquerque, USA, Jul. 2006, pp. 2295–2298. [52] A. Patrovsky, M. Daigle, and K. Wu, “Coupling mechanism in hybrid SIW-CPW forward couplers for millimeter-wave substrate integrated circuits,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 11, pp. 2594–2601, Nov. 2008. [53] G. D. Angelis, A. Lucibello, E. Proietti, R. Marcelli, and G. Bartolucci, “Design and technology of micro-machined coplanar grounded wave-guides,” IET Microw. Antennas Propag. , vol. 6, no. 5, pp. 497–504, Apr. 2012. [54] K. Ma, K. S. Yeo, J.-G. Ma, “Phase compensation of cascaded conductor-backed CPW periodic cells,” IEEE Trans. Compon., Packag., Manuf. Technol., vol. 2, no. 9, pp. 1455–1464, Sep. 2012. [55] M. A. Magerko, L. Fan, and K. Chang, “Multiple dielectric structures to eliminate moding problems in conductor-backed coplanar waveguide MIC’s,” IEEE Microw. Guided Wave Lett., vol. 2, no. 6, pp. 257–259, Jun. 1992. [56] Y. Liu, K. Cha, and T. Itoh, “Elimination of resonance in finite-width conductor-backed coplanar waveguides,” in Proc. 24th European Microw. Conf., Cannes, France, Sep. 1994, pp. 1222–1226. [57] M. A. Magerko, L. Fan, and K. Chang, “Configuration considerations for multi-layered packaged conductor-backed coplanar waveguide MIC’s,” in IEEE MTT-S Int. Microw. Symp. Dig., San Diego, USA, May. 1994, pp. 1697–1700. [58] Y. Liu, K. Cha, and T. Itoh, “Non-leaky coplanar (NLC) waveguides with conductor backing,” IEEE Trans. Microw. Theory Tech., vol. 43, no. 5, pp. 1067–1072, May 1995. [59] C.-Y. Lee, Y. Liu, and T. Itoh, “The effects of the coupled slotline mode and air-bridges on CPW and NLC waveguide discontinuities,” IEEE Trans. Microw. Theory Tech., vol. 43, no. 12, pp. 2759–2765, Dec. 1995. [60] Z. Ma and E. Yamashita, “Comparative studies of discontinuities in single and double layered conductor-backed coplanar waveguides,” in IEEE MTT-S Int. Microw. Symp. Dig., San Francisco, USA, Jun. 1996, pp. 1803–1806. [61] M. Hotta, Y. Qian, and T. Itoh, “Efficient FDTD analysis of conductor-backed CPW’s,” IEEE Trans. Microw. Theory Tech., vol. 47, no. 8, pp. 1585–1587, Aug. 1999. [62] M. Hotta, M. Kobayashi, T. Inoue, and M. Hano, “Effects of backside grooving on leakage loss of conductor-backed coplanar waveguide,” in Proc. Asia-Pacific Microw. Conf., Taipei, Taiwan, Dec. 2001, pp. 847–850. [63] Y. Liu, C.-Y. Lee, and T. Itoh, “Slotline antenna with non-leaky coplanar (NLC) waveguide feed,” in IEEE AP-S Int. Symp. Dig., Newport Beach, USA, Jun. 1995, pp. 366–369. [64] H.-C. Liu, T.-S. Horng, and N. G. Alexopoulos, “Radiation of printed antennas with a coplanar waveguide feed,” IEEE Trans. Antennas Propag. , vol. 43, no. 10, pp. 1143–1148, Oct. 1995. [65] Y. Qian and T. Itoh, “Characterization and minimization of mutual coupling between NLC-fed slot antennas,” in IEEE MTT-S Int. Microw. Symp. Dig., Denver, USA, Jun. 1997, pp. 1623–1626. [66] D. R. Jahagirdar and R. D. Stewart, “Nonleaky conductor-backed coplanar waveguide-fed rectangular microstrip patch antenna,” IEEE Microw. Guided Wave Lett., vol. 8, no. 3, pp. 115–117, Mar. 1998. [67] J. P. Jacobs, “Low-profile CPW-fed slot antenna with parasitic slot on conductor-backed two-layer substrate,” in Proc. Int. Conf. Electromagn. Adv. Applicat., Torino, China, Sep. 2009, pp. 655–657. [68] K.-P. Ma, J. Kim, F.-R. Yang, Y. Qian, and T. Itoh, “Leakage suppression in stripline circuits using a 2-D photonic bandgap lattice,” in IEEE MTT-S Int. Microw. Symp. Dig., Anaheim, USA, Jun. 1999, pp. 73–76. [69] F.-R. Yang, K.-P. Ma, Y. Qian, and T. Itoh, “A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuits,” IEEE Trans. Microw. Theory Tech., vol. 47, no. 8, pp. 1509–1514, Aug. 1999. [70] K.-H. Oh, T.-Y. Kim, S. Moon, H.-J. Song, W.-B. Kim, C.-S. Park, and J.-I. Song, “Characterization of uniplanar compact photonic-bandgap finite-width conductor-backed coplanar waveguide by using an electrooptic near-field mapping technique,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 2, pp. 854–860, Feb. 2006. [71] J. D. Shumpert, W. J. Chappell, and L. P. B. Katehi, “Parallel-plate mode reduction in conductor-backed slots using electromagnetic bandgap substrates,” IEEE Trans. Microw. Theory Tech., vol. 47, no. 11, pp. 2099–2104, Nov. 1999. [72] R. Abhari and G. V. Eleftheriades, “Suppression of the parallel-plate noise in high-speed circuits using a metallic electromagnetic band-gap structure,” in IEEE MTT-S Int. Microw. Symp. Dig., Seattle, USA, Jun. 2002, pp. 493–496. [73] F. Elek, R. Abhari, and G. V. Eleftheriades, “A uni-directional ring-slot antenna achieved by using an electromagnetic band-gap surface,” IEEE Trans. Antennas Propag., vol. 53, no. 1, pp. 181–190, Jan. 2005. [74] J.-H. Chen, S.-Y. Chen, and P. Hsu, “Leakage-reduced conductor-backed coplanar waveguide with periodic structures and its antenna application,” IEEE Trans. Antennas Propag., vol. 59, no. 6, pp. 2078–2086, Jun. 2011. [75] J. Hesselbarth and R. Vahldieck, “Leakage suppression in coplanar waveguide circuits by patterned backside metallization,” in IEEE MTT-S Int. Microw. Symp. Dig., Anaheim, USA, Jun. 1999, pp. 871–874. [76] D. B. Schlieter and R. M. Henderson, “Designing high impedance etched ground GCPW,” in Proc. IEEE 10th Annu. Wireless Microw. Technol. Conf., Clearwater, USA, Apr. 2009. [77] T. Nishino, Y. Yoshida, Y. Suehiro, S.-S. Lee, K. Miyaguchi, T. Fukami, H. Oh-hashi, and O. Ishida, “A hollow-GCPW (HGCPW) as low-loss and wafer-conductivity-free structure on a single silicon wafer,” in Proc. 33th European Microw. Conf., Munich, Germany, Oct. 2003, pp. 41–44. [78] F. R. Williams and T. G. Ruttan, “Coplanar transmission structure having spurious mode suppression,” U.S. Patent 5 225 796, July 6, 1993. [79] S.-J. Kim, H.-S. Yoon, and H.-Y. Lee, “Suppression of leakage resonance in coplanar MMIC package using a Si sub-mound Layer,” IEEE Trans. Microw. Theory Tech., vol. 48, no. 12, pp. 2664–2669, Dec. 2000. [80] W. Menzel and W. Grabherr, “A microstrip patch antenna with coplanar feed line,” IEEE Microw. Guided Wave Lett., vol. 1, no. 11, pp. 340–342, Nov. 1991. [81] Y. Turki, C. Migliaccio, and J.M. Laheurte, “Circularly polarised square patch antenna fed by coplanar waveguide,” Electron. Lett., vol. 33, no. 15, pp. 1321–1323, Jul. 1997. [82] K. Hettak and G. Delisle, “A novel antenna configuration for millimeter wave communication systems,” in Proc. IEEE AP-S Int. Symp., Atlanta, USA, Jun. 1998, pp. 2092–2095. [83] M. Boulmalf and G. Y. Delisle, “CPW fed microstrip antenna for indoor broadband wireless communications,” in Proc. IEEE AP-S Int. Symp., Atlanta, USA, Jun. 1998, pp. 802–805. [84] L. Giauffret and J.-M. Laheurte, “Parametric study of the coupling aperture in CPW-fed microstrip antennas,” Proc. Inst. Elect. Eng.-Microw. Antennas Propag., vol. 146, no. 3, pp. 169–174, Jun. 1999. [85] C.-Y. Huang and K.-L. Wong, “Coplanar waveguide-fed circularly polarized microstrip antenna,” IEEE Trans. Antennas Propag., vol. 48, no. 2, pp. 328–329, Feb. 2000. [86] C.-C. Hsu, P. Hsu, and J.-F. Kiang, “Analysis of coplanar waveguide-fed circular patch antenna,” in Proc. Asia-Pacific Microw. Conf., Taipei, Taiwan, Dec. 2001, pp. 1338–1341. [87] K. H. Y. Ip and G. V. Eleftheriades, “A compact CPW-based single-layer injection-locked active antenna for array applications,” IEEE Trans. Microw. Theory Tech., vol. 50, no. 2, pp. 481–486, Feb. 2002. [88] C.-Y. Huang and C.-W. Ling, “CPW feed circularly polarised microstrip antenna using asymmetric coupling slot,” Electron. Lett., vol. 39, no. 23, Nov. 2003. [89] I-J. Chen, C.-S. Huang, and P. Hsu, “Circularly polarized patch antenna array fed by coplanar waveguide,” IEEE Trans. Antennas Propag., vol. 52, no. 6, pp. 1607–1609, Jun. 2004. [90] I-J. Chen, “CPW-fed circularly polarized 2×2 sequentially rotated patch antenna array,” in Proc. Asia-Pacific Microw. Conf., Suzhou, China, Dec. 2005. [91] G. Mansour, P. S. Hall, P. Gardner, and M.K.A. Rahim, “Switchable multi-band coplanar antenna,” in Proc. Loughborough Antennas Propag. Conf., Loughborough, UK, Nov. 2011, pp. 1–4. [92] H. A. Elsadek, “CLIP antenna for wireless Bluetooth applications,” IEEE Antennas Propag. Mag., vol. 47, no. 3, pp. 149–153, Jun. 2005. [93] S. Chaimool, P. Akkaraeakthalin, and M. Krairksh, “CPW-fed slot antennas using loading metallic strips and a widened tuning stub with a finite reflector,” in Proc. Int. Symp.Commun. Inform. Technol., Bangkok, Thailand, Oct. 2006, pp. 791–794. [94] S.-Y. Chen, I-C. Lan, and P. Hsu, “In-line series-feed collinear slot array fed by a coplanar waveguide,” IEEE Trans. Antennas Propag., vol. 55, no. 6, pp. 1739–1744, Jun. 2007. [95] P. Cao, Y. Huang, J. Zhang, and Y. Lu, “A comparison of planar monopole antennas for UWB applications,” in Proc. Loughborough Antennas Propag. Conf., Loughborough, UK, Nov. 2011, pp. 1–4. [96] S.-P. Pan, J.-Y. Sze, and P.-J. Tu, “Circularly polarized square slot antenna with a largely enhanced axial-ratio bandwidth,” IEEE Antennas Wireless Propag. Lett., vol. 11, pp. 969–972, 2012. [97] G. Li, H. Zhai, L. Li, C. Liang, “A nesting-L slot antenna with enhanced circularly polarized bandwidth and radiation,” IEEE Antennas Wireless Propag. Lett., vol. 13, pp. 225–228, 2014. [98] D. Sievenpiper, L. Zhang, R. F. J. Broas, N. G. Alexopolous, and E. Yablonovitch, “High-impedance electromagnetic surfaces with a forbidden frequency band,” IEEE Trans. Microw. Theory Tech., vol. 47, no. 11, pp. 2059–2074, Nov. 1999. [99] F. Yang and Y. Rahmat-Samii, Electromagnetic Band-Gap Structures in Antenna Engineering. Cambridge, U.K.: Cambridge Univ. Press, 2009, pp. 4–6. [100] S. Zhu and R. Langley, “Dual-band wearable antennas over EBG substrate,” Electron. Lett., vol. 43, no. 3, pp. 141–142, Feb. 2007. [101] K. Payandehjoo and R. Abhari, “Suppression of substrate coupling between slot antennas using electromagnetic bandgap structures,” in Proc. IEEE AP-S Int. Symp., San Diego, USA, Jul. 2008. [102] S. Zhu and R. Langley, “Dual-band wearable textile antenna on an EBG substrate,” IEEE Trans. Antennas Propag., vol. 57, no. 4, pp. 926–935, Apr. 2009. [103] K. Payandehjoo and R. Abhari, “Employing EBG structure in multiantenna systems for improving isolation and diversity gain,” IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 1162–1165, 2009. [104] M. Mantash, A.-C. Tarot, S. Collardey, and K. Mahdjoubi, “Dual-band CPW-fed G-antenna using an EBG structure,” in Proc. Loughborough Antennas Propag. Conf., Loughborough, UK, Nov. 2010, pp. 453–456. [105] D.-N. Cui, Y.-A. Liu, S.-L. Li, and C.-P. Yu, “UC-EBG on reflector for 3.45-GHz frequency band antenna array application,” in Proc. 2nd Pacific-Asia Conf. Circuits, Commun. and System, Beijing, China, Aug. 2010, pp. 363–365. [106] J. Joubert, J. C. Vardaxoglou, W. G. Whittow, and J. W. Odendaal, “CPW-fed cavity-backed slot radiator loaded with an AMC reflector,” IEEE Trans. Antennas Propag., vol. 60, no. 2, pp. 735–742, Feb. 2012. [107] M.-H. Hsu, T.-C. Tang, and K.-H. Lin, “EBG reflector-backed MIMO antenna with wideband isolation and uni-directional radiation pattern MIMO antenna for MIMO radar,” in Proc. IEEE AP-S Int. Symp., Orlando, USA, Jul. 2013, pp. 612–613. [108] V. V. Yem and B. Journet, “Novel high gain and broadband CPW-fed antennas with EBG for ITS applications,” in Proc. Int. Conf. Adv. Technol. Commun., Ho Chi Minh City, Vietnam, Oct. 2013, pp. 451–456. [109] P. Prakash, M. P. Abegaonkar, A. Basu, and S. K. Koul, “Gain enhancement of a CPW-fed monopole antenna using polarization-insensitive AMC structure,” IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 1315–1318, 2013. [110] M.S. Alam, M.T. Islam, and N. Misran, “Inverse triangular-shape CPW-fed antenna loaded with EBG reflector,” Electron. Lett., vol. 49, no. 2, pp. 86–88, Jan. 2013. [111] D. M. Pozar, “Considerations for millimeter wave printed antennas,” IEEE Trans. Antennas Propag., vol. AP-31, no. 5, pp. 740–747, Sep. 1983. [112] R. L. Rogers and D. P. Neikirk, “Use of broadside twin element antennas to increase efficiency on electrically thick dielectric substrates,” Int. J. Infrared Millim. Waves, vol. 9, no. 11, pp. 949–969, 1988. [113] R. L. Rogers and D. P. Neikirk, “Radiation properties of slot and dipole elements on layered substrates,” Int. J. Infrared Millim. Waves, vol. 10, no. 6, pp. 697–728, 1989. [114] R. L. Rogers, S. M. Wentworth, D. P. Neikirk, and T. Itoh, “A twin slot antenna on a layered substrate coupled to a microstrip feed line,” Int. J. Infrared Millim. Waves, vol. 11, no. 10, pp. 1225–1249, 1990. [115] S. M. Wentworth, R. L. Rogers, J. G. Heston, D. P. Neikirk, and T. Itoh, “Millimeter wave twin slot antennas on layered substrates,” Int. J. Infrared Millim. Waves, vol. 11, no. 2, pp. 111–131, 1990. [116] J. G. Heston, S. M. Wentworth, R. L. Rogers, D. P. Neikirk, and T. Itoh, “MM wave/FIR twin slot antenna structures,” in IEEE AP-S Int. Symp. Dig., Dallas, USA, May 1990, pp. 788–790. [117] I-C. Lan and P. Hsu, “Parallel-plate slot array fed by conductor-backed coplanar waveguide,” in Proc. 35th European Microw. Conf., Paris, France, Oct. 2005, pp. 473–476. [118] I-C. Lan and P. Hsu, “Gain-enhanced slot antenna fed by conductor-backed coplanar waveguide,” in Proc. Asia-Pacific Microw. Conf., Yokohama, Japan, Dec. 2006, pp. 73–76. [119] I-C. Lan, S.-Y. Chen, and P. Hsu, “Coupled twin slots fed by conductor-backed coplanar waveguide,” IEEE Trans. Antennas Propag., vol. 56, no. 6, pp. 1784–1786, Jun. 2008. [120] I-C. Lan, S.-Y. Chen, and P. Hsu, “Pattern smoothness and gain enhancement of finite ground slot dipole antenna fed by conductor-backed coplanar waveguide,” in Proc. IEEE AP-S Int. Symp., San Diego, USA, Jul. 2008. [121] C.-H. Lee, S.-Y. Chen, and P. Hsu, “Efficiency-enhanced and size-reduced coupled twin slots capacitively fed by conductor-backed coplanar waveguide,” IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 1033–1035, 2009. [122] C.-H. Lee, I-C. Lan, S.-Y. Chen, and P. Hsu, “Coplanar waveguide-fed twin slot antenna with and without back conductor,” in Proc. IEEE AP-S Int. Symp., San Diego, USA, Jul. 2008. [123] J.-H. Chen, Y.-J. Lu, P. Hsu, and S.-Y. Chen, “CBCPW-fed side-plane patch antenna,” in Proc. 38th European Microw. Conf., Amsterdam, the Netherlands, Oct. 2008, pp. 531–534. [124] Yen-Ju Lu, I-C. Lan, S.-Y. Chen, and P. Hsu, “Finite-width conductor-backed coplanar waveguide-fed side-plane antenna,” in Proc. IEEE AP-S Int. Symp., San Diego, USA, Jul. 2008. [125] K. Li, C. H. Cheng, T. Matsui, and M. Izutsu, “Simulation and experimental study on coplanar patch and array antennas,” in Proc. Asia-Pacific Microw. Conf., Sydney, Australia, Dec. 2000. [126] K. Li, C. H. Cheng, T. Matsui, and M. Izutsu, “Coplanar patch antennas: principle, simulation and experiment,” in Proc. IEEE AP-S Int. Symp., Boston, USA, Jul. 2001, pp. 402–405. [127] K. Li and M. Izutsu, “Photodetection, photonic feeding coplanar patch antenna and transmitting experiment for radio-on-fiber system,” in IEEE MTT-S Int. Microw. Symp. Dig., Phoenix, USA, May 2001, pp. 73–76. [128] K. F. Tong, K. Li, T. Matsui, and M. Izutsu, “Wideband coplanar waveguide fed coplanar patch antenna,” in Proc. IEEE AP-S Int. Symp., Boston, USA, Jul. 2001, pp. 406–409. [129] P. L. Chin, A. Z. Elsherbeni, and C. E. Smith, “Characteristics of coplanar bow-tie patch antennas,” in Proc. IEEE AP-S Int. Symp., San Antonio, USA, Jun. 2002, pp. 389–401. [130] S. Pandey and R. Ramdadoss, “Coplanar patch antenna fed at the non-radiating edge,” in Proc. IEEE AP-S Int. Symp., Monterey, USA, Jun. 2004, pp. 3397–3400. [131] K. Li, C.-P. Chen, T. Anada, and T. Matsui, “Electric field in coplanar patch antenna (CPA) -- simulation and measurement --,” in Proc. Asia-Pacific Microw. Conf., Suzhou, China, Dec. 2005. [132] C.-H. K. Chin, Q. Xue, and C. H. Chan, “Design of a 5.8-GHz rectenna incorporating a new patch antenna,” IEEE Antennas Wireless Propag. Lett., vol. 4, pp. 175–178, 2005. [133] T. Zwick, D. Liu, J. Grzyb, and B. Gaucher, “A coplanar patch antenna for integration with mmWave SiGe Transceiver,” in Proc. IEEE Int. Workshop Antenna Technol. Small Antennas Novel Metamaterials, New York, USA, Mar. 2006, pp. 416–419. [134] J.-H. Chen, S.-Y. Chen, and P. Hsu, “Conductor-backed coplanar waveguide fed circular coplanar patch antenna,” in Proc. Asia-Pacific Microw. Conf., Yokohama, Japan, Dec. 2010, pp. 88–91. [135] C. Kim, X. Cheng, D. E. Senior, K. T. Kim, and Y.-K. Yoon, “A surface micromachined high gain dielectric lens antenna for millimeter wave applications,” in Proc. IEEE AP-S Int. Symp., Chicago, USA, Jul. 2012. [136] Z. Du, A. Tamminen, J. Ala-Laurinaho, J. Saily, P. Rantakari, A. Luukanen, “Design and optimization of reconfigurable reflectarray element with MEMS phase shifter,” in Proc. 7th European Conf. Antennas Propag., Gothenburg, Sweden, Apr. 2013, pp. 2422–2426. [137] Z. N. Chen, N. Yang, Y.-X. Guo, and M. Y. W. Chia, “An investigation into measurement of handset antennas,” IEEE Trans. Instrum. Meas., vol. 54, no. 3, pp. 1100–1110, Jun. 2005. [138] D. M. Pozar and B. Kaufman, “Comparison of three methods for the measurement of printed antenna efficiency,” IEEE Trans. Antennas Propag., vol. 36, no. 1, pp. 136–139, Jan. 1988. [139] S. D. Rogers, “Electromagnetic-bandgap layers for broad-band suppression of TEM modes in power planes,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 8, pp. 2495–2505, Aug. 2005. [140] S. Shahparnia and O. M. Ramahi, “Electromagnetic interference (EMI) reduction from printed circuit boards (PCB) using electromagnetic bandgap structures,” IEEE Trans. Electromagn. Compat., vol. 46, no. 4, pp. 580–587, Nov. 2004. [141] Y.-J. Lu and P. Hsu, “Design of an EBG-backed CPW-fed slot antenna,” in Proc. Asia-Pacific Microw. Conf., Kaohsiung, Taiwan, Dec. 2012, pp. 79–81. [142] D. M. Pozar, Microwave Engineering, 3rd ed. New York, NY: Wiley, 2005, sec. 8.1. [143] J. Liang, H.-Y. D. Yang, “Radiation characteristics of a microstrip patch over an electromagnetic bandgap surface,” IEEE Trans. Antennas Propag., vol. 55, no. 6, pp. 1691–1697, Jun. 2007. [144] K. C. Gupta, R. Garg, I. Bahl, and P. Bhartia, Microstrip Lines and Slotlines, 2nd ed. Boston, MA: Artech House, 1996, pp. 282–286. [145] W. L. Stutzman, “Estimating directivity and gain of antennas,” IEEE Antennas Propag. Mag., vol. 40, no. 4, pp. 7–11, Aug. 1998. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/8009 | - |
dc.description.abstract | 本論文提出背覆不同材質平板之共平面波導饋入印刷天線之設計,探討了印刷天線背覆空氣、導體和電磁能隙結構等三種不同材質時,天線特性的變化。首先探討的是在有及無背板導體時的共平面波導饋入印刷天線之設計,此設計可以在有及無背板導體時工作在相同的頻率而且擁有良好的天線輻射特性,主要是因為所提出的混和式設計在有及無背板導體時天線共振特性的改變已經被考量在內。因此,一個混和式設計可以被使用在無背板導體的無線通訊應用,同時在不更動其設計參數值,此設計也可以被用在需要背板導體時的應用。其次,一個縮小化的混和式設計也被提出和探討。接著,吾人提出一個增加阻抗頻寬的方法,有效地加大了混和式天線設計的阻抗頻寬,同時維持良好的天線輻射特性。
本論文下半部,主要探討背覆電磁能隙結構的共平面波導饋入印刷式槽偶極天線之設計,背覆電磁能隙結構與槽偶極天線之間的交互作用,使得背覆電磁能隙的設計與傳統共平面波導饋入槽偶極天線的設計有著顯著的不同,吾人於本論文詳述其差異並且提出一個完整的天線設計方法。 | zh_TW |
dc.description.abstract | Designs of printed antenna fed by coplanar waveguide (CPW) with different backing materials are presented in this dissertation. In the first half of this dissertation, hybrid designs of CPW-fed printed antenna with and without back conductor (BC) are presented. The hybrid designs can adapt themselves to the presence or absence of BC. First, the original hybrid design is proposed, analyzed, and designed. When BC is placed, the antenna is a conductor-backed CPW (CBCPW)-fed side plane patch antenna, while when BC is removed, the antenna becomes a CPW-fed slot dipole antenna. The antenna is designed to have the side plane patch and the slot dipole operate at the same frequency, so that it can adapt itself to the presence or absence of BC. In addition, miniaturization and bandwidth enhancement of the hybrid designs are presented, respectively. Compared with the original design, miniaturized design achieves roughly 40% reduction in size and the overlapping impedance bandwidth of the bandwidth-enhanced design is wider, approximately three times of the original design.
In the second half of this dissertation, design of an electromagnetic bandgap (EBG)-backed CPW-fed slot dipole antenna is presented. The antenna is formed by placing a CPW-fed slot dipole on the top of the EBG structure. It is found that the design considerations of the EBG-backed CPW-fed slot dipole are different from those of the conventional CPW-fed slot dipole. This is because the propagation characteristics of the EBG-backed slotline utilized in the EBG-backed design are quite different from those of the slotline for the conventional design. By using the extracted propagation constant of the EBG-backed slotline, a detailed antenna design procedure is presented. | en |
dc.description.provenance | Made available in DSpace on 2021-05-19T18:02:33Z (GMT). No. of bitstreams: 1 ntu-103-D98942010-1.pdf: 2677902 bytes, checksum: 50ca12379b9a0007a7005ebb345bcc3a (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | 口試委員會審定書 i
誌謝 iii 摘要 v Abstract vii Contents ix List of Figures xii List of Tables xvi Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Literature Survey 2 1.3 Contribution 10 1.4 Chapter Outlines 11 Chapter 2 Hybrid Designs of Printed Antenna Fed by Coplanar Waveguide With and Without Back Conductor 17 2.1 The Original Case 17 2.1.1 Introduction 18 2.1.2 Antenna Structure and Design 20 2.1.3 Simulation and Measurement Results 22 2.1.4 Summary 26 2.2 The Compact Case 28 2.2.1 Introduction 28 2.2.2 Antenna Structure and Design 28 2.2.3 Simulation and Measurement Results 31 2.2.4 Summary 33 2.3 The Bandwidth-Enhanced Case 35 2.3.1 Introduction 35 2.3.2 Antenna Structure and Design 36 2.3.3 Simulation and Measurement Results 39 2.3.4 Summary 43 Chapter 3 Design of an EBG-Backed Coplanar Waveguide-Fed Slot Dipole Antenna 69 3.1 Introduction 69 3.2 Antenna Structure and Design 71 3.3 Simulation and Measurement Results 73 3.4 Conclusion 78 Chapter 4 Conclusion 91 Reference 95 Publication List of Yen-Ju Lu 121 | |
dc.language.iso | en | |
dc.title | 背覆平板共平面波導饋入印刷天線之設計 | zh_TW |
dc.title | Design of Printed Antenna Fed by Coplanar Waveguide With Backing Plate | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 陳士元,鄭士康,毛紹綱,李學智,楊成發 | |
dc.subject.keyword | 背覆導體共平面波導,背覆導體槽線,共平面波導,電磁能隙結構,補釘天線,槽孔天線, | zh_TW |
dc.subject.keyword | Conductor-backed coplanar waveguide (CBCPW),conductor-backed slotline (CBS),coplanar waveguide (CPW),electromagnetic bandgap (EBG) structures,patch antennas,slot antennas, | en |
dc.relation.page | 122 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2014-08-15 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
dc.date.embargo-lift | 2024-12-30 | - |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 此日期後於網路公開 2024-12-30 | 2.62 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。