請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/77803
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 施文彬(Wen-Pin Shih) | |
dc.contributor.author | Yung-Chen Yao | en |
dc.contributor.author | 姚泳辰 | zh_TW |
dc.date.accessioned | 2021-07-11T14:35:08Z | - |
dc.date.available | 2020-07-19 | |
dc.date.copyright | 2018-07-19 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-07-06 | |
dc.identifier.citation | [1] H. Cao, X. Zhang, and X. Chen, “The concept and progress of intelligent spindles: A review,” International Journal of Machine Tools and Manufacture, vol. 112, pp. 21–52, 2017.
[2] F. W. Taylor, On the art of cutting metals. New York: American Society of Mechanical Engineers, 1907, p. 148. [3] Y. Fu, Y. Zhang, H. Zhou, D. Li, H. Liu, H. Qiao, and X. Wang, “Timely online chatter detection in end milling process,” Mechanical Systems and Signal Processing, vol. 75, pp. 668–688, 2016. [4] J. Tlusty and F. Ismail, “Basic Non-Linearity in Machining Chatter,” CIRP Annals, vol. 30, no. 1, pp. 299–304, 1981. [5] J. Tlusty, W. Zaton, and F. Ismail, “Stability Lobes in Milling,” CIRP Annals, vol. 32, no. 1, pp. 309–313, 1983. [6] Y. Altintaş and E. Budak, “Analytical Prediction of Stability Lobes in Milling,” CIRP Annals, vol. 44, no. 1, pp. 357–362, 1995. [7] R. P. H. Faassen, N. V. D. Wouw, J. Oosterling, and H. Nijmeijer, “Prediction of regenerative chatter by modelling and analysis of high-speed milling,” International Journal of Machine Tools and Manufacture, vol. 43, no. 14, pp. 1437–1446, 2003. [8] E. Solis, C. Peres, J. Jiménez, J. Alique, and J. Monje, “A new analytical–experimental method for the identification of stability lobes in high-speed milling,” International Journal of Machine Tools and Manufacture, vol. 44, no. 15, pp. 1591–1597, 2004. [9] S. D. Merdol and Y. Altintas, “Multi Frequency Solution of Chatter Stability for Low Immersion Milling,” Journal of Manufacturing Science and Engineering, vol. 126, no. 3, pp. 459–466, 2004. [10] T. Insperger and G. Stépán, “Semi-discretization method for delayed systems,” International Journal for Numerical Methods in Engineering, vol. 55, no. 5, pp. 503–518, 2002. [11] J. Muñoa, M. Zatarain, Z. Dombovari and Y. Yang, “Effect of Mode Interaction on Stability of Milling Processes,” 12th CIRP Conference on Modelling of Machining Operations, San Sebastian, Spain, 2009. [12] R. Du, M. Elbestawi, and B. Ullagaddi, “Chatter detection in milling based on the probability distribution of cutting force signal,” Mechanical Systems and Signal Processing, vol. 6, no. 4, pp. 345–362, 1992. [13] E. Soliman and F. Ismail, “Chatter detection by monitoring spindle drive current,” The International Journal of Advanced Manufacturing Technology, vol. 13, no. 1, pp. 27–34, 1997. [14] C. Toh, “Vibration analysis in high speed rough and finish milling hardened steel,” Journal of Sound and Vibration, vol. 278, no. 1-2, pp. 101–115, 2004. [15] S. Tangjitsitcharoen, “In-process monitoring and detection of chip formation and chatter for CNC turning,” Journal of Materials Processing Technology, vol. 209, no. 10, pp. 4682–4688, 2009. [16] Z. Han, H. Jin, M. Li and H. Fu, “An open modular architecture controller based online chatter suppression system for CNC milling,” Mathematical Problems in Engineering, vol. 2015, 2015. [17] M. C. Yoon and D. H. Chin, “Cutting force monitoring in the endmilling operation for chatter detection,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 219, no. 6, pp. 455–465, 2005. [18] Z. Yao, D. Mei, and Z. Chen, “On-line chatter detection and identification based on wavelet and support vector machine,” Journal of Materials Processing Technology, vol. 210, no. 5, pp. 713–719, 2010. [19] Y. Sun, C. Zhuang, and Z. Xiong, “Real-time chatter detection using the weighted wavelet packet entropy,” 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 1652–1657, 2014. [20] Y. Sun and Z. Xiong, “An Optimal Weighted Wavelet Packet Entropy Method With Application to Real-Time Chatter Detection,” IEEE/ASME Transactions on Mechatronics, vol. 21, no. 4, pp. 2004–2014, 2016. [21] H. Cao, Y. Lei, and Z. He, “Chatter identification in end milling process using wavelet packets and Hilbert–Huang transform,” International Journal of Machine Tools and Manufacture, vol. 69, pp. 11–19, 2013. [22] G. G. Yen and K. C. Lin, 'Wavelet packet feature extraction for vibration monitoring,' IEEE Transactions on Industrial Electronics, vol. 47, no. 3, pp. 650-667, 2000. [23] S. Tangjitsitcharoen, T. Saksri, and S. Ratanakuakangwan, “Advance in chatter detection in ball end milling process by utilizing wavelet transform,” Journal of Intelligent Manufacturing, vol. 26, no. 3, pp. 485–499, Apr. 2013. [24] X. Q. Li, Y. S. Wong, and A. Y. C. Nee, “A Comprehensive Identification of Tool Failure and Chatter Using a Parallel Multi-ART2 Neural Network,” Journal of Manufacturing Science and Engineering, vol. 120, no. 2, p. 433, 1998. [25] M. Lamraoui, M. Barakat, M. Thomas, and M. E. Badaoui, “Chatter detection in milling machines by neural network classification and feature selection,” Journal of Vibration and Control, vol. 21, no. 7, pp. 1251–1266, 2013. [26] J. Hino, S. Okubo, and T. Yoshimura, “Chatter Prediction in End Milling by FNN Model with Pruning,” JSME International Journal Series C-Mechanical Systems Machine Elements and Manufacturing, vol. 49, no. 3, pp. 742–749, 2006. [27] R. P. H. Faassen, “Chatter prediction and control for high speed milling: modeling and experiments,” Ph.D. Thesis, Eindhoven University of Technology, 2007. [28] T. Insperger and G. Stépán, “Stability of the milling process,” Periodica Polytechnica Mechanical Engineering, vol. 44, no. 1, pp. 47–57, 2000. [29] G. Stépán, “Modelling nonlinear regenerative effects in metal cutting,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 359, no. 1781, pp. 739–757, 2001. [30] X.-H. Long, B. Balachandran, and B. P. Mann, “Dynamics of milling processes with variable time delays,” Nonlinear Dynamics, vol. 47, no. 1-3, pp. 49–63, 2006. [31] T. Insperger, Semi-discretization for time-delay systems: stability and engineering applications. Place of publication not identified: Springer-Verlag New York, 2014. [32] T. Insperger and G. Stépán, 'Updated semi-discretization method for periodic delay-differential equations with discrete delay', International Journal for Numerical Methods in Engineering, vol. 61, no. 1, pp. 117-141, 2004. [33] O. Bobrenkov, E. Butcher and B. Mann, 'Application of the Liapunov–Floquet transformation to differential equations with time delay and periodic coefficients', Journal of Vibration and Control, vol. 19, no. 4, pp. 521-537, 2012. [34] T. Insperger, G. Stépán, P. Bayly, and B. Mann, “Multiple chatter frequencies in milling processes,” Journal of Sound and Vibration, vol. 262, no. 2, pp. 333–345, 2003. [35] P. Goupillaud, A. Grossmann, and J. Morlet, “Cycle-octave and related transforms in seismic signal analysis,” Geoexploration, vol. 23, no. 1, pp. 85–102, 1984. [36] F. Wasilewski, “Wavelet Browser by PyWavelets,” Daubechies 10 wavelet (db10) properties, filters and functions - Wavelet Properties Browser. [Online]. Available: http://wavelets.pybytes.com/wavelet/db10/. [37] S. G. Mallat, “A theory for multiresolution signal decomposition: The wavelet representation,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.11, no. 7, pp. 674–693, 1989. [38] F. Safara, S. Doraisamy, A. Azman, A. Jantan, and S. Ranga, “Wavelet Packet Entropy for Heart Murmurs Classification,” Advances in Bioinformatics, vol. 2012, pp. 1–6, 2012. [39] C. E. Shannon, “A Mathematical Theory of Communication,” Bell System Technical Journal, vol. 27, no. 4, pp. 623–656, 1948. [40] Z. Li, W. Li and R. Liu, “Applications of Entropy Principles in Power Systems: A Survey,” 2005 IEEE/PES Transmission & Distribution Conference & Exposition: Asia and Pacific, Dalian, pp. 1-4, 2005. [41] EFavDB, “EFavDB/svm-classification,” GitHub. [Online]. Available: https://github.com/EFavDB/svm-classification. [42] B. Schölkopf, R.C. Williamson, A. J. Smola, J. Shawe-Taylor and J. Platt, “Support vector method for novelty detection,” Advances in Neural Information Processing Systems 12, pp. 526-532, 1999. [43] K.-R. Muller, S. Mika, G. Ratsch, K. Tsuda, and B. Schölkopf, “An introduction to kernel-based learning algorithms,” IEEE Transactions on Neural Networks, vol. 12, no. 2, pp. 181–201, 2001. [44] M. M. Breunig, H.-P. Kriegel, R. T. Ng, and J. Sander, “LOF: Identifying Density-Based Local Outliers,” Proceedings of the 2000 ACM SIGMOD international conference on Management of data, pp. 93–104, 2000. [45] D. L. Olson and D. Delen, Advanced data mining techniques. Berlin: Springer, pp.137–138, 2008. [46] E. Budak and Y. Altintaş, “Analytical Prediction of Chatter Stability in Milling—Part I: General Formulation,” Journal of Dynamic Systems, Measurement, and Control, vol. 120, no. 1, pp. 22–30, 1998. [47] B. Patel, B. Mann, and K. Young, “Uncharted islands of chatter instability in milling,” International Journal of Machine Tools and Manufacture, vol. 48, no. 1, pp. 124–134, 2008. [48] T. Choi and Y. C. Shin, “On-Line Chatter Detection Using Wavelet-Based Parameter Estimation,” Journal of Manufacturing Science and Engineering, vol. 125, no. 1, pp. 21–28, 2003. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/77803 | - |
dc.description.abstract | 隨著工業4.0的時代到來,對智慧工具機的需求與日俱增。智慧工具機強調機台本身具有自我監測、判斷與修復的能力,而工具機主軸切削顫振即為其中一項重要議題。顫振為主軸切削過程中所引發的自激式振動,顫振發生時會破壞工件表面精度且加速刀具磨耗,嚴重甚至會造成斷刀等現象。過去已有多位學者提出顫振偵測方法,然而大多數研究僅能分辨出成長完全的顫振訊號,無法分辨轉換狀態資料,且顫振偵測的閾值設定也多採用經驗法則,較難達到即時偵測與抑制的效果。因此,本論文提出一套智慧主軸顫振抑制模組,透過建立切削振動力學模型、小波包能量熵、異常偵測演算法及顫振抑制策略達到即時偵測及抑制顫振的效果。首先,建立切削力學模型以推導主軸顫振頻率,並繪製了三維系統穩定性圖。此模型考慮了進刀速率所造成的時間延遲影響,使系統穩定性圖增加了進刀速率的維度。其次,以小波包轉換計算相對小波包能量熵做為偵測顫振的特徵。小波包轉換對高頻有良好的靈敏度,可使顫振更早被預測。另外,以一類支持向量機與局部密度因子分辨顫振資料並比較兩種演算法的結果,實驗結果顯示局部密度因子代價函數為較低的0.0684,約略可視為有93.16%的分辨率,有較好的分類效果。最後,基於系統穩定性圖,制定顫振抑制策略,優先確保加工效率的提升,同時達到抑制顫振的效果。本論文從預處理至即時監控提出一套完整對策,成功開發出偵測顫振轉換狀態資料,並抑制顫振發生之系統。 | zh_TW |
dc.description.abstract | With the advent of industry 4.0 era, the demand for intelligent machine tools is increasing. Intelligent machine tools emphasize that machine has the capability of self-monitoring, self-abnormal diagnosis and self-repairing. One of the significant issues of intelligent machine tools is chattering of spindle. Chatter is a self-excited vibration generated during cutting process. When it occurs, the accuracy of the workpiece surface is destroyed and the tool wear out rapidly. Even worse, it may cause the cutting tool broken. Different chatter detection methods have been proposed in the past. However, most researches could only identify fully developed chatter data rather than transition data. Moreover, setting threshold values of chatter often relied on experiences and experiments. Therefore, this thesis presented an intelligent-spindle chatter-suppression module to achieve real-time detections and suppressions of chatter through the establishment of spindle vibration model, relative wavelet packet energy entropy, anomaly detection algorithm and chatter suppression strategy. First, the spindle vibration model was established to derive the chatter frequency of spindle and construct the three-dimensional stability lobe diagram. This model took the variable time delay caused by feed rate into account, which increase the dimension of feed rate in stability lobe diagram. Second, the relative wavelet packet energy entropy calculated by wavelet packet transform was used as the feature of chatter detection. Wavelet packet transform had good sensitivity in high frequency which lead to early prediction of chatter. In addition, one-class support vector machine (OCSVM) and local outlier factor (LOF) were used to identify transition data. Based on the experimental results obtained from the two algorithms, local outlier factor demonstrated 0.0684 cost, which could be considered as 93.16% accuracy based on the weight of each class and was better than the one-class support vector machine. Last, based on the stability lobe diagram, a chatter suppression strategy was developed to improve the efficiency of machining and achieve effective chatter suppression. In conclusion, this thesis presented an intelligent chatter-suppressed system composed of preprocessing, real-time detection, and immediate suppressions by detecting chatter in transition state and suppressing chattering automatically. | en |
dc.description.provenance | Made available in DSpace on 2021-07-11T14:35:08Z (GMT). No. of bitstreams: 1 ntu-107-R05522527-1.pdf: 4323683 bytes, checksum: 802024d9ab6b2c24dac976163286c3e2 (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 ii ABSTRACT iii SYMBOL TABLE v CONTENTS x LIST OF FIGURES xiii LIST OF TABLES xvii Chapter 1 Introduction 1 1.1 Background and motivation 1 1.2 Literature review 3 1.2.1 Stability lobe diagram 3 1.2.2 Chatter detection 5 1.3 Thesis organization 9 Chapter 2 Spindle chatter theory 10 2.1 Spindle vibration model with variable time delay 10 2.2 Semi-discretization 15 2.3 Chatter frequency and stability lobe diagram 18 Chapter 3 Real-time detection and suppression 22 3.1 Monitoring strategy 22 3.1.1 Wavelet transform 22 3.1.2 Wavelet packet transform 26 3.1.3 Relative wavelet packet energy entropy 27 3.2 Data classification algorithm 29 3.2.1 Anomaly detection 29 3.2.2 One-class support vector machine 31 3.2.2.1 Support vector machine 31 3.2.2.2 The theory of one-class support vector machine 37 3.2.3 Local outlier factor 39 3.3 Evaluation and validation 42 3.3.1 Cost function 42 3.3.2 Stratified k-fold cross validation 44 3.4 Strategy of chatter suppression 45 3.4.1 Chatter suppression algorithm 45 3.4.2 Intelligent chatter suppression module 47 Chapter 4 Experiments and validations 49 4.1 Experiment facilities and equipment 49 4.1.1 CNC machine tool and material 49 4.1.2 Measuring equipment 49 4.2 Chatter theory validation 50 4.2.1 Cutting force coefficients measurement 50 4.2.2 Modal testing 54 4.2.3 Stability lobe diagram validation 59 4.3 Chatter detection test 62 4.3.1 Acceleration signal measurement 62 4.3.2 Algorithm validation and comparison 63 4.4 Chatter suppression test 68 Chapter 5 Conclusions and future works 75 5.1 Conclusions 75 5.2 Future works 76 REFERENCE 77 | |
dc.language.iso | en | |
dc.title | OCSVM與LOF演算法用於智慧主軸之即時監測與顫振分析抑制 | zh_TW |
dc.title | Real-time Chatter Detection, Analysis and Suppression for Intelligent Spindles Based on One-class Support Vector Machine and Local Outlier Factor | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 劉建豪(Chien-Hao Liu) | |
dc.contributor.oralexamcommittee | 施博仁,胡毓忠 | |
dc.subject.keyword | 智慧主軸,顫振抑制,即時監控,系統穩定性圖,小波包能量熵,一類支持向量機,局部密度因子, | zh_TW |
dc.subject.keyword | intelligent spindle,chatter suppression,real-time detection,stability lobe diagram,relative wavelet packet energy entropy,one-class support vector machine,local outlier factor, | en |
dc.relation.page | 82 | |
dc.identifier.doi | 10.6342/NTU201801344 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2018-07-06 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-R05522527-1.pdf 目前未授權公開取用 | 4.22 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。