請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/70559
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 吳肇欣(Chao-Hsin Wu) | |
dc.contributor.author | I-Chen Tseng | en |
dc.contributor.author | 曾怡蓁 | zh_TW |
dc.date.accessioned | 2021-06-17T04:31:04Z | - |
dc.date.available | 2021-08-15 | |
dc.date.copyright | 2018-08-15 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-08-11 | |
dc.identifier.citation | [1] H. Burchardt, N. Serafimovski, D. Tsonev, S. Videv, and H. Haas, “VLC: beyond point-to-point communication,” IEEE Commun. Mag. 52(7), 98–105 (2014).
[2] T. Komine and M. Nakagawa, “Fundamental analysis for visible-light communication system using LED lights,” IEEE Trans. Consum. Electron. 50(1), 100–107 (2004). [3] H. Elgala, R. Mesleh, and H. Haas, “Indoor optical wireless communication: potential and state-of-the-art,” IEEE Commun. Mag. 49(9), (2011). [4] S. Rajbhandari, J. J. D. Mckendry, J. Herrnsdorf, H. Chun, G. Faulkner, H. Hass, I. M. Watson, D. O’Brien, and M. D. Dawson, “A review of gallium nitride LEDs for multi-gigabit-per-second visible light data communications,” Semicond. Sci. Technol. 32(2), (2017). [5] C. Lee, C. Zhang, M. Cantore, R. M. Farrell, S. H. Oh, T. Margalith, J. S. Speck, S. Nakamura, J. E. Bowers, and S. P. DenBaars, “4 Gbps direct modulation of 450 nm GaN laser for high-speed visible light communication,” Opt. Express 23(12), 16232–16237 (2015). [6] C. Lee, C. Shen, H. M. Oubei, M. Cantore, B. Janjua, T. K. Ng, R. M. Farrell, M. M. El-Desouki, J. S. Speck, S. Nakamura, B. S. Ooi, and S. P. DenBaars, “2 Gbit/s data transmission from an unfiltered laser-based phosphor-converted white lighting communication system,” Opt. Express 23(23), 29779–29787 (2015). [7] J. Y. Tsao, M. H. Crawford, M. E. Coltrin, A. J. Fischer, D. D. Koleske, G. S. Subramania, G. T. Wang, J. J. Wierer, and R. F. Karlicek, Jr., “Toward smart and ultra-efficient solid-state lighting,” Adv. Opt. Mater. 2(9), 809–836 (2014). [8] N. Abu-Ageel and D. Aslam, “Laser-driven visible solid-state light source for etendue-limited applications,” J. Disp. Technol. 10(8), 700–703 (2014). [9] J. J. D. McKendry, D. Massoubre, S. Zhang, B. R. Rae, R. P. Green, E. Gu, R. K. Henderson, A. E. Kelly, and M. D. Dawson “Visible light communications using a CMOS-controlled micro-light-emitting-diode array,” J. Lightwave. Technol. 30(1), 61–67 (2012). [10] R. X. G. Ferreira, E. Xie, J. J. D. McKendry, S. Rajbhandari, H. Chun, G. Faulkner, S. Watson, A. E. Kelly, E. Gu, R. V. Penty, I. H. White, D. C. O’Brien, and M. D. Dawson, “High bandwidth GaN-based micro-LEDs for multi-Gb/s visible light communications,” IEEE Photon. Technol. Lett. 28(19), 2023–2026 (2016). [11] A. Rashidi, M. Monavarian, A. Aragon, S. Okur, M. Nami, A. Rishinaramangalam, S. Mishkat-Ul-Masabih, and D. Feezell, “High-speed nonpolar InGaN/GaN LEDs for visible-light communication,” IEEE Photon. Technol. Lett. 29(4), 381–384 (2017). [12] J. W. Shi, K. L. Chi, J. M. Wun, J. E. Bowers, Y. H. Shih, and J. K. Sheu, “III-nitride-based cyan light-emitting diodes with GHz bandwidth for high-speed visible light communication,” IEEE Electron Device Lett. 37(7), 894–897 (2016). [13] Z. Gong, S. Jin, Y. Chen, J. McKendry, D. Massoubre, I. M. Watson, E. Gu, and M. D. Dawson, “Size-dependent light output, spectral shift, and self-heating of 400 nm InGaN light-emitting diodes,” J. Appl. Phys. 107(1), 013103 (2010). [14] M. Feng, N. Holonyak, Jr., and W. Hafez, “Light-emitting transistor: Light emission from InGaP/GaAs heterojunction bipolar transistors,” Appl. Phys. Lett. Vol. 84, 2004 [15] M. Feng, N. Holonyak, Jr., and R. Chan, “Quantum-well-base heterojunction bipolar light-emitting transistor,” Appl. Phys. Lett. 84, 1952 (2004). [16] G. Walter, N. Holonyak, Jr., M. Feng, and R. Chan, “Laser operation of a heterojunction bipolar light-emitting transistor,” Appl. Phys. Lett. 85, 4768 (2004). [17] G. Walter, C. H. Wu, H. W. Then, M. Feng, and N. Holonyak, Jr., “4.3 GHz optical bandwidth light emitting transistor,” Appl. Phys. Lett. 94, 241101 (2009). [18] M. Feng, S. C. Shen, D. Caruth, and J. J. Huang, “Device technologies for RF front-end circuits in next-generation wireless communications,” Proc. IEEE 92(2), 354–375 (2004). [19] R. D. Dupuis, J. Kim, Y. C. Lee, Z. Lochner, T. Kao, M. H. Ji, T. T. Kao, J. H. Ryou, T. Detchphrom, and S. C. Shen, “III-N High-Power Bipolar Transistors,” ECS Trans. 58(4), 261–267 (2013). [20] M. Feng, N. Holonyak, Jr., B. Chu-Kung, G. Walter, and R. Chan, “Type-II GaAsSb/InP heterojunction bipolar light-emitting transistor,” Appl. Phys. Lett. 84, 4792 (2004). [21] F. Dixon, R. Chan, G. Walter, N. Holonyak, Jr., M. Feng, X. B. Zhang, J. H. Ryou, and R. D. Dupuis, “Visible spectrum light-emitting transistors,” Appl. Phys. Lett. 88, 012108 (2006). [22] B. F. Chu-Kung, M. Feng, G. Walter, N. Holonyak, Jr., T. Chung, J.-H. Ryou, J. Limb, D. Yoo, S.-C. Shen, R. D. Dupuis, D. Keogh, and P. M. Asbeck, “Graded-base InGaN/GaN heterojunction bipolar light-emitting transistors,” Appl. Phys. Lett. 89, 082108 (2006). [23] B. F. Chu-Kung, C. H. Wu, G. Walter, M. Feng, N. Holonyak, T. Chung, J. H. Ryou, and R. D. Dupuis, “Modulation of high current gain (Beta>49) light-emitting InGaN/GaN heterojunction bipolar transistors (HBTs),” Appl. Phys. Lett. 91, 232114 (2007). [24] 浩堉碩論 [25] J. J. Huang, M. Hattendorf, M. Feng, D. Lambert, B. Shelton, M. Wong, U. Chowdhury, T. Zhu, H. Kwon, and R. D. Dupuis, “Temperature dependent common emitter current gain and collector-emitter offset voltage study in AlGaN/GaN heterojunction bipolar transistors,” IEEE Electron Device Lett. 22(4), 157–159 (2001). [26] Hao-Hsiang Yang, Wen-Chung Tu, Hsiao-Lun Wang, and Chao-Hsin Wu, “Investigation of effective base transit time and current gain modulation of light-emitting transistors under different ambient temperatures,” Appl. Phys. Lett. 105, 181119 (2014). [27] M. Feng, N. Holonyak, Jr., H. W. Then, and G. Walter, “Charge control analysis of transistor laser operation”, Appl. Phys. Lett. 91, 053501 (2007) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/70559 | - |
dc.description.abstract | 本篇論文的主要研究為藍光發光二極體陣列特性的研究與探討,分別從陣列數目對光輸出強度、調變頻寬、等效電路模型、資料傳輸之表現作分析。目前已經有許多研究致力於開發高速藍光二極體,分別從磊晶、幾何、製程著手,希望可以追求更高的調變速度以之後可運用於可見光通訊,一般來說,達到高調變速度的通則是縮小元件面積,由於小尺寸的元件能夠承受更高的電流密度以及較低的接面溫度,達到較高的調變頻寬,但縮小元件面積的同時會犧牲輸出光強,運用於可見光通訊作為光源的元件,必須兼具傳輸速度與照明功能,因此,如何開發高速藍光二極體同時兼具照明功能是一大必須克服的問題。本篇論文透過將微米發光二極體透過並列的方式,整合成不同陣列數目的元件,探討陣列數目對發光功率及調變速度的影響,我們獲得了光強度隨陣列數目增加而現性增加的結果,且在相同電流密度下,不同陣列元件的調變速度表現相同,相較於單一式發光二極體,陣列式發光二極體除了能提升光強度外,並不會損失調變速度。我們進一步量測不同陣列數目相對的資料傳輸特性,得到越多陣列數目的元件在資料傳輸特性表現上更好的結果,因此在元件尺寸縮小時,透過此陣列結構,能增強光強度且維持調變速度,使元件資料傳輸特性更好。
此外,接續我們實驗室之前成功製造出第一個藍光量子井(QW) 發光電晶體,並呈現其基本光電特性及頻譜外,我們更進一步調查藍光發光電晶體的熱效應現象,傳統異質雙極性電晶體的電流增益隨溫度上升而變小,是由於溫度升高時,基極和射極接面能帶差變小,導致回流載子變多,電流增益變小,不同於傳統異質雙極性電晶體在熱效應表現的現象,由於載子經過基極裡的量子井,會有捕捉與逃脫機制, 而載子的逃脫時間方程式又與溫度成反比,也就是溫度上升,載子逃脫時間越短,逃脫出來的載子則會跑到集極形成集極電流,使得發光電晶體的電流增益隨溫度增加而變大,形成電流增益,透過此機制,發光電晶體可應用於溫度感測器,與一般紅外光的發光電晶體不同,藍光發光電晶體由於是可見光,將更容易被偵測與應用。為了進一步了解溫度對發光電晶體的影響,我們使用載子控制模型,透過解邊界條件並帶入實驗結果的參數,可獲的不同溫度下載子在基極區分布的情形。藉由以上特性,藍光發光電晶體將是未來可見光通訊與光互連的關鍵元件。 | zh_TW |
dc.description.abstract | The core of this paper is the research and discussion of the characteristics of blue light-emitting diode arrays, including analyzed the effect of the array numbers on the light intensity, modulation bandwidth, equivalent circuit model and data transmission. At present, there are many studies devoted to the development of high-speed blue light diodes, starting from epitaxy, geometry, and manufacturing processes. Pursuing higher modulation speeds to be applied to visible light communication. Generally speaking, the higher modulation speed can be achieved by scaling down the device area. Because the small size component can withstand higher current density and lower junction temperature to achieve higher modulation width. However, reducing the component area will sacrifice light intensity. As a component of the light source for visible light communication, it must have both modulation speed and illumination function. Therefore, how to develop a high-speed blue LED and simultaneously have a lighting function is a major problem that must be overcome. In this paper, by integrating the micro-light emitting diodes into a parallel array, the effects of the number of arrays on the luminous power and the modulation speed are discussed. We have obtained a linearly increase in the light intensity as the array number increases. The modulation bandwidth of the different arrays behave the same at the same current density, which means the array configurations can enhance the optical power while not lose the modulation speed. We further measure the data rate characteristics of different arrays, and find that the device with more array numbers can exhibit better performance in data transmission characteristics. In summary, the light intensity can be enhanced and better data transfer quality can be obtained through the array structures.
In addition, after our lab successfully manufacture the first blue quantum well (QW) luminescent transistor, and present its basic optoelectronic characteristics and spectrum, we further investigate the thermal effects of blue luminescent transistors. The current gain of the traditional heterogeneous bipolar becomes smaller as the temperature rises. When the temperature rises, the difference between the base and emitter junctions becomes smaller, resulting in more reflow carriers and smaller current gain. Different from traditional heterogeneous bipolar, the thermal effect on LETs is very different. Because the capture and escape mechanism in the QW, the carrier escape time equation is inversely proportional to the temperature, that is, the temperature rises, and the carrier escape time is shorter. The escaped carrier will run to the collector to form a collector current, so that the current gain of the light-emitting transistor becomes larger as the temperature increases. Through this mechanism, the light-emitting transistor can be applied to the temperature sensor. What’s more, the blue light-emitting transistors are more easily detected than GaAs-based (infrared) light-emitting transistors. As a result, blue LET is more suitable for thermal sensor application because they are visible light. Furthermore, we use the carrier control model to learn more about the thermal effect on the LET. By solving the boundary conditions and bringing in the parameters of the experimental results, we can obtain the distribution of carriers in the base region under different temperature. With the above characteristics, blue light-emitting transistors will be the key components for future visible light communication and optical interconnection. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T04:31:04Z (GMT). No. of bitstreams: 1 ntu-107-R05941100-1.pdf: 4106186 bytes, checksum: 78b091052a643259aa1ae6fddb38bff6 (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 口試委員審定書 I
誌謝 II 中文摘要 III Abstract V Table of Contents VIII List of Figures X List of Tables XVII Chapter 1. Introduction 1 1.1. Motivation 1 1.2. From Light-Emitting Diodes to Light-Emitting Transistors 3 Chapter 2. Design of High Speed Blue Micro-Light-Emitting Diodes Arrays 6 2.1. Preface 6 2.2. Layout design and Device fabrication 7 2.3. The Uniformity and DC characteristics of LED arrays 10 2.3.1. DC Characteristics 10 2.3.2. The impact of increasing arrays numbers on efficiency 14 2.3.3. Field distribution 16 2.4. Summary of High-Speed Blue Micro-LEDs Arrays for Visible-Light Communication 20 Chapter 3. High-Speed Integrated Micro-LED Array for Visible Light Communication 22 3.1. Preface 22 3.2 Microwave 22 3.2.1 Measurement setup 22 3.2.2 Modulation bandwidth characteristics 24 3.2.3 Microwave parameter 28 3.3 Eye diagram 31 3.3.1 Measurement setup 31 3.3.2 Result and discussion 34 3.4 Conclusion 42 Chapter 4. Thermal Effect of Blue Quantum Well InGaN/GaN Light Emitting Transistor 44 4.1 Preface 44 4.2 Layer Structure Design and Device Fabrication 46 4.3 Electrical and Optical DC Characteristics 48 4.4 Thermal Effect on Current Gain and Light Output Power 53 4.4.2 Current Gain and Light power 53 4.4.2 Carrier distribution 59 4.5 Conclusion 63 Chapter 5. Conclusion 65 References 67 | |
dc.language.iso | zh-TW | |
dc.title | 藍光二極體陣列之特性及藍光電晶體熱效應之探討 | zh_TW |
dc.title | Investigation on Characteristics of Blue Light-Emitting Diode Array and Thermal Effect of Blue Light-Emitting Transistors | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 黃定洧(Ding-Wei Huang) | |
dc.contributor.oralexamcommittee | 黃建璋(Jian-Jang Huang),林恭如(Gong-Ru Lin),張書維(Shu-Wei Chang) | |
dc.subject.keyword | 可見光通訊,發光二極體陣列,異質接面式雙極性電晶體,發光電晶體,熱效應, | zh_TW |
dc.subject.keyword | Visible light communication,light-emitting diodes,light-emitting diodes array,heterojunction bipolar transistors,light-emitting transistors,equivalent circuit model, | en |
dc.relation.page | 71 | |
dc.identifier.doi | 10.6342/NTU201803076 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2018-08-13 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-1.pdf 目前未授權公開取用 | 4.01 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。