請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/69204
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃世建(Shyh-Jiann Hwang) | |
dc.contributor.author | "Hsu, Yu-Cheng" | en |
dc.contributor.author | 徐侑呈 | zh_TW |
dc.date.accessioned | 2021-06-17T03:10:33Z | - |
dc.date.available | 2018-07-23 | |
dc.date.copyright | 2018-07-23 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-07-18 | |
dc.identifier.citation | [1] ACI Committee 318, (2014), “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, Mich., 520 pp.
[2] ASCE, (2014), “Seismic Evaluation and Retrofit of Existing Buildings (41-13),” ASCE/SEI 41-13, Reston, VA. [3] Bali, I., and Hwang, S. J. (2007). “Strength and deflection prediction ofdouble curvature reinforced concrete squat walls.” Struct. Eng. Mech., 27(4), 501 – 521. [4] Collins, M.P., and Mitchell, D., (1987), “Prestressed Concrete Basics”, Canadian Precast Prestressed Concrete Institute, Ottawa, Ontario, Canada, 614 pp. [5] Elwood, K. J., and Moehle, J. P., (2005), “Axial capacity model for shear damaged columns,” ACI Structural Journal, Vol. 102, No. 4, 578-587. [6] Elwood, K. J., and Moehle, J. P., (2005), “Drift capacity of reinforced concrete columns with light transverse reinforcement,” Earthquake Spectra, Vol. 21, No. 1, 71-89. [7] Foster,S.J, and Gilbert, R.I., (1996), “The Design of Nonflexural Members with Normal and High-Strength Concretes,” ACI Structural Journal, Vol. 93, No. 1, January-February, pp. 3-10. [8] Hwang, S. J., and Lee, H. J., (1999), “Analytical Model for Predicting Shear Strengths of Exterior Reinforced Concrete Beam-Column Joints for Seismic Resistance,” ACI Structural Journal, Vol. 96, No. 5, September-October, pp. 846-858. [9] Hwang, S. J., and Lee, H. J., (2000), “Analytical Model for Predicting Shear Strengths of Interior Reinforced Concrete Beam-Column Joints for Seismic Resistance,” ACI Structural Journal, Vol. 97, No. 1, January-February, pp. 35-44. [10] Hwang, S. J., and Lee, H. J., (2002), “Strength Prediction for Discontinuity Regions by Softened Strut-and-Tie Model,” Journal of Structural Engineering, ASCE, Vol. 128, No. 12, December, pp. 1519-1526. [11] Hwang, S. J., Fang, W. H., Lee, H. J., and Yu, H. W., (2001), “Analytical Model for Predicting Shear Strength of Squat Walls,” Journal of Structural Engineering, ASCE, Vol. 127, No. 1, January, pp. 43-50. [12] Hwang, S. J., Lu, W. Y., and Lee, H. J., (2000), “Shear Strength Prediction for Deep Beams,” ACI Structural Journal, Vol. 91, No. 3, May-June, pp. 367-376. [13] Hwang, S. J., Lu, W. Y., and Lee, H. J., (2000), “Shear Strength Prediction for Reinforced Concrete Corbels,” ACI Structural Journal, Vol. 97, No. 4, July-August, pp. 543-552. [14] Hwang, S. J., Tsai, R. J., Lam, L. K., and Moehle, J.P., (2017) “Simplification of Softened Strut-and-Tie Model for Strength Prediction of Discontinuity Region,” ACI Structural Journal, V. 114, No. 5, September-October, pp. 1239-1248. [15] Li, Y. A., and Hwang, S. J. (2017). “Prediction of lateral load displacement curves for reinforced concrete short columns failed in shear.” J. Struct. Eng., 10.1061/(ASCE)ST.1943-541X.0001656), 04016164. [16] Li, Y. A., Huang, Y. T., and Hwang, S. J. (2014). “Seismic response of reinforced concrete short columns failed in shear.” ACI Struct. J., 111(4), 945 – 954. [17] Li, Y.A., Weng, P.W., and Hwang, S.J., (2018), “Seismic Performance of Reinforced Concrete Columns with Intermediate Height-to-Depth Ratio Failed in Shear”, under preparation. [18] MacGregor, J. G., (1997) 'Reinforced Concrete: Mechanics and Design,' 3rd Edition, Prentice Hall Inc., Upper Saddle River, NJ, 939 pp. [19] Moehle, J.P., (2015) “Seismic Design of Reinforced Concrete Buildings”, McGraw-Hill Eduction, USA, 760 pp [20] Ono, M., and Tokuhiro, I., (1992), “A proposal of Reducing Rate for Strength Due to Opening Effect of Reinforced Concrete Framed Shear Walls,” Journal of Struc. Constr. Engng., AIJ, No. 453, May, pp. 119-129. [21] Paulay, T., and Binney, J. R., (1974) “Diagonally Reinforced Coupling Beams of Shear Walls,” Shear in Reinforced Concrete, SP-42, American Concrete Institute, Farmington Hills, MI, pp. 579-598. [22] Paulay, T., and Priestley, M. J. N., (1992), “Seismic Design of Reinforced Concrete and Masonry Buildings,” John Wiley & Sons, Inc., New York, 744 pp. [23] Schäfer, K., “Strut-and-Tie Models for Design of Structural Concrete, (1996), ” Notes of Workshop, National Cheng Kung University, Tainan, Taiwan, March, 140 pp. [24] Tsai, R.J., Hsu, Y.C., and Hwang, S.J., (2018), “Prediction of Lateral Load-Displacement Curve of Reinforced Concrete Walls with Openings under Shear Failure”, under preparation. [25] Weng P.W., Li, Y.A., Tu, Y.S., and Hwang, S.J., (2017), “Prediction of the Lateral Load-Displacement Curves for Reinforced Concrete Squat Walls Failing in Shear”, ASCE, Vol. 143, Issue 10, October 2017. [26] Wu, Y. M., T. L. Teng, T. C. Shin, and N. C. Hsiao (2003). Relationship between peak 36 ground acceleration, peak ground velocity, and intensity in Taiwan, Bull. Seism. Soc. Am 93, 386-396. [27] Yeh, R.L., Tseng, C.C., and Hwang, S.J., (2018), “Shear Strength of RC Vertical Wall Segments under Seismic Loadin”, accepted by ACI Structural Journal. [28] Zhang. L. X. B., and Hsu, T. T. C., (1998), “Behavior and Analysis of 100 MPa Concrete Membrane Elements,” Journal of Structural Engineering, ASCE, Vol. 124, No. 1, January, pp. 24-34. [29] 小野正行、江崎文也 (2002),「有開ロ耐震壁の力学性状に及ぼす載荷速度の影響に関する実験的研究 その2中央開ロを有する耐震壁の場合」,日本建築学会大会学術講演梗概集,北陸,8月,第499-500頁。 [30] 小野正行、德広育夫 (1996),「開口壁の水平耐力の評価に関する研究」,コンクリート工学論文集,第7巻,第2号,第53-63頁。 [31] 山口圭二、小野正行、江崎文也 (2001),「有開ロ耐震壁の力学性状に及ぼす載荷速度の影響に関する実験的研究」,日本建築学会大会学術講演梗概集,關東,9月,第561-562頁。 [32] 中國土木水利工程學會 (2011),「混凝土工程設計規範與解說(土木401-100)」,科技圖書股份有限公司,台北。 [33] 日本建築學會 (AIJ 2010),「鉄筋コンクリート構造計算規準‧同解說」,日本建築學會,東京都,日本,6月,525頁。 [34] 王進財 (1990),「無邊界柱開口鋼筋混凝土剪力牆之耐震行為」,碩士論文,國立成功大學,建築研究所,台南,229頁。 [35] 杜昱石 (2014) ,「低矮鋼筋混凝土街屋具典型開口外牆之耐震行為研究」,碩士論文,國立台灣科技大學,營建工程系,台北,6月,443頁。 [36] 周欣沛 (2017),「含邊界柱之鋼筋混凝土剪力牆側力位移曲線預測模型」,碩士論文,國立台灣大學,土木工程學系,台北,6月,162頁。 [37] 松岡良智、小野正行、江崎文也 (2001),「耐震壁の履歷性狀に及ぼす載荷速度の影響に関する実験的研究」,コンクリート工学年次論文集,Vol. 23,No. 3,第433-438頁。 [38] 松岡良智、江崎文也、小野正行 (2003),「有開ロ耐震壁の力学性状に及ぼす載荷速度の影響」,コンクリート工学年次論文集,Vol. 25,No. 2,第601-606頁。 [39] 林永健 (2016),「開孔鋼筋混凝土剪力牆之側力位移曲線預測」,碩士論文,國立台灣大學,土木工程系,台北,197頁。 [40] 邱聰智 (2015),「低矮型鋼筋混凝土住宅結構耐震快速評估法之開發與驗證」,博士論文,國立台灣大學,土木工程系,台北,177頁。 [41] 楊欽富 (1991),「含邊界柱開口鋼筋混凝土剪力牆之耐震行為」,碩士論文,國立成功大學,建築研究所,台南,233頁。 [42] 葉柔伶 (2017),「開孔鋼筋混凝土剪力牆耐震能力提升之研究」,碩士論文,國立台灣大學,土木工程學系,台北,6月,146頁。 [43] 德田俊宏、小野正行、江崎文也 (2000-a),「一定速度の水平力を受けるRC有開ロ耐震壁の履歴性状」,コンクリート工学年次論文集,Vol. 22,No. 3,第445-450頁。 [44] 德田俊宏、小野正行、江崎文也 (2000-b),「一定速度載荷を受けるRC有開口耐震 壁の履歴性状 その2有開口耐震壁の場合」,日本建築学会大会学術講演梗概集,東北, 9月,第743-744頁。 [45] 蔡仁傑 (2015),「鋼筋混凝土開孔牆之側力位移曲線預測」,碩士論文,國立台灣大學,土木工程學系,台北,181頁。 [46] 簑田裕久、小野正行、江崎文也、阿部浩一 (1998),「有開ロ耐震壁の弾塑性性状に及ぼす載荷速度の影響に関する実験的研究」,日本建築学会大会学術講演梗概集,九州,9月,第873-876頁。 [47] 蕭輔沛,鍾立來,葉勇凱,簡文郁,沈文成,邱聰智,周德光,趙宜峰,翁樸文,楊耀昇,褚有倫,凃耀賢,柴駿甫,黃世建 (2013) ,「校舍結構耐震評估與補強技術手冊(第三版)」,國家地震工程研究中心研究報告,NCREE 13-023,台北。 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/69204 | - |
dc.description.abstract | 臺灣街屋之震損調查經驗顯示,低矮型街屋的破壞多集中延騎樓方向的一樓,這是由於街屋建築型式具有延此方向開孔牆較多的特性。而為了經濟有效地進行新建設計與既有建築之評估與補強,考慮開孔鋼筋混凝土剪力牆的耐震貢獻是必要的。
因此本研究之目的是開發一套開孔鋼筋混凝土剪力牆的側力位移曲線分析模型,作為工程師於設計或評估既有結構物之耐震能力分析所需的工具。工程師可以將本研究提出之側力位移曲線設定為等值寬柱模型之非線性塑鉸,並以此進行低矮型結構物之非線性側推分析求取整體結構之側力容量曲線。 根據美國 ACI 318-14 規範,規定須在開孔處額外配置水平與垂直筋。而日本 AIJ (2010) 規範所建議之強度分析公式中則是包含開孔剪力牆兩側邊界柱之主筋與尺寸等參數。本研究提出之分析模型能反應開口水平補強鋼筋的配置與細節及邊界構材之主筋與混凝土對於開孔鋼筋混凝土剪力牆的強度貢獻,因而對開孔鋼筋混凝土之側力位移曲線能作較為準確的評估。 | zh_TW |
dc.description.abstract | Accoding the reconnaissance of building damage due to earthquake, most low-rise street buildings were damaged concentrately on the first floor parallel to the arcade. The reason is that the walls are with more openings along this direction. In order to seismic design and retrofit buildings economically and efficiently, the stiffness and the strength of the walls with openings should be considered.
Hance, a prediction model for lateral load and displacement curves of reinforced concrete wall with opening is proposed in this thesis. With it, engineers can conduct nonlinear push-over analysis included the seismic behavior of shear wall with opening. The results become more accurate. Therefore, the economic efficiency of seismic design and retroffting is improved, and the damage of RC wall with opening can be controlled. Per the ACI 318-14, the code suggestes that the extra horizontal and vertical reinforcement is required around the openings. According to AIJ (2010), a propsed strength prediction formula is provided, considering the effects of the longitudinal reinforcement and the exterior concrete of the boundary elements. However the requirement of ACI 318-14 is a qualitative description and the prediction meodel of AIJ (2010) is an empirical formula, lacking of clear physical meaning. The proposed model in this thesis is base on the force transfer mechanism, expected to describe the strength contribution of extra reinforcement near the openings and the boundary element more clearly. Also, the amount, location and detailing of reinforcement can be well designed with this model. The prediction results are reasonable and conservative comparing with the experimental data from literature. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T03:10:33Z (GMT). No. of bitstreams: 1 ntu-107-R05521206-1.pdf: 19238311 bytes, checksum: 83cfb390dad9dfdd806302bb393c396e (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 誌謝 v
摘要 vii ABSTRACT viii 目錄 ix 表目錄 xiii 圖目錄 xvii 第一章 簡介 1 1.1研究動機與目的 1 1.2研究內容與方法 3 第二章 文獻回顧 5 2.1 美國混凝土學會 ACI 318-14 規範 5 2.2 日本建築學會 AIJ (2010) 鋼筋混凝土構造計算規準 6 2.3 Hwang and Lee (2000) 軟化壓拉桿模型(Soften Strut-and-Tie Model, SST) 8 2.3.1 Hwang and Lee (2002) 軟化壓拉桿模型精算法 10 2.3.2 Hwang et al. (2017) 軟化壓拉桿模型幾何簡算法 13 2.4 豎向構件之側力位移曲線 15 2.4.1 剪力牆之側力位移曲線 15 2.4.2 一般柱之撓剪破壞側力位移曲線 19 2.4.3 一般柱之剪力破壞側力位移曲線 20 2.4.4 中短柱之側力位移曲線 21 2.4.5 短柱之側力位移曲線 23 2.5 蔡仁傑 (2015) 之開孔RC牆側力位移曲線分析模型 24 2.5.1 開孔牆之強度關鍵桿件 24 2.5.2 開孔牆之關鍵桿件選取方式與傳力路徑建立 24 2.5.3 剪力元素勁度 25 2.5.4 傳力路徑之勁度 26 2.5.5 開孔牆側力位移曲線之建立 26 2.6 林永健 (2016) 之開孔 RC 牆側力位移曲線模型 27 2.6.1 節點水平力平衡檢討 28 2.6.2 節點垂直力平衡檢討 30 2.7 Yeh et al. (2018)開孔RC牆豎向構件尺寸修正模型 30 2.8 周欣沛 (2017) 含邊界柱RC牆之側力位移曲線模型 31 2.8.1 雙曲率邊界柱並聯模型 32 2.8.2 單曲率邊界柱並聯模型 33 2.9 國內外對開孔鋼筋混凝土剪力牆之實驗文獻 34 2.9.1 葉柔伶 (2017) 實驗文獻 34 2.9.2 王進財 (1990) 和楊欽富 (1991) 實驗文獻 35 2.9.3 杜昱石 (2014) 實驗文獻 35 2.9.4 Ono and Tokuhiro (1992) 實驗文獻 36 2.9.5 小野正行與江崎文也 et al. (2000~2003)之實驗文獻 36 2.9.6 小野正行 and 德広育夫 (1996) 實驗文獻 37 2.9.7 簑田裕久 et al. (1998) 實驗文獻 37 2.9.8 松岡良智 et al. (2001) 實驗文獻 38 第三章 單層開孔RC牆側力位移曲線模型 39 3.1單層開孔RC剪力牆忽略邊界構材之分析模型 (分析一) 39 3.1.1 本模型的基本假設與適用範圍 39 3.1.2 開孔RC剪力牆強度關鍵構件之位置與強度 40 3.1.3 開孔RC剪力牆關鍵構件之幾何尺度與節點力平衡 43 3.1.4 開孔RC剪力牆關鍵構件傳力之幾何限制 47 3.1.5 開孔RC剪力牆關鍵構件之種類與側力位移曲線模型 49 3.1.6 開孔RC剪力牆之測力位移曲線模型:彈簧串並聯模型 50 3.1.7分析一之小結 50 3.2使用斷面分析之壓力區深度:考慮邊界構材撓曲鋼筋之強度貢獻 (分析二) 51 3.2.1含軸力之彈性斷面分析 51 3.2.2分析二之小結 52 3.3考慮邊界構材突出牆面之混凝土剪力強度貢獻(分析三) 52 3.3.1邊界構材之有效剪力強度 53 3.3.2分析三之小結 53 第四章 模型驗證與比較 55 4.1分析模型比較 55 4.1.1 分析一、分析二和分析三之強度點強度分析值比較結果 55 4.1.2 分析一、分析二和分析三之強度點位移分析值比較結果 57 4.1.3 試體分析之側力位移曲線與實驗包絡線比較 58 4.1.4試體分析結果與實驗裂縫比較 59 4.2本研究與各國規範比較 60 4.2.1 美國 ACI 318-14 ( ACI 2014) 預測強度與實驗結果比較 60 4.2.3 日本 AIJ (2010) 混凝土構造計算規準預測強度與實驗結果比較 61 4.3 本研究與各國規範對撓曲破壞主控之試體分析結果比較 63 4.4 小結 64 第五章 各實驗文獻試體之特殊分析方法 67 5.1 含邊界柱之豎向構件行為之探討:以楊欽富(1991)之試體為例 67 5.1.1 T字型斷面之豎向構件之行為探討 67 5.1.2 以忽略翼牆之邊界柱作為關鍵構件(分析四、分析五) 68 5.1.3 各分析方法預測強度之驗證與比較 68 5.1.4 各分析方法預測側力位移曲線比較 69 5.1.5 小結 70 5.2 斜向鋼筋之強度貢獻探討:以王進財(1990)與楊欽富(1991)之試體為例 70 5.2.1 配置對角斜向鋼筋之抗剪構件文獻回顧 70 5.2.2 斜向鋼筋之應變分析鋼筋抗剪貢獻之分析模型 71 5.2.3 分析方法之驗證與比較 72 5.2.4 小結 74 5.3 加載速率影響開孔RC牆強度之分析 75 5.3.1 加載速率影響開孔RC牆強度之分析 75 5.3.2 分析方法之驗證與比較 78 5.3.3 小結 79 5.5小結 79 第六章 結論與建議 83 6.1 結論 83 6.2未來研究與建議 84 參考文獻 85 Appendix A 各實驗文獻原始側力位移遲滯迴圈 243 | |
dc.language.iso | zh-TW | |
dc.title | 開孔鋼筋混凝土剪力牆側力位移曲線之研究 | zh_TW |
dc.title | A Study of Lateral Load and Displacement Curves of Reinforced Concrete Wall with Openings | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 歐昱辰,鄭敏元 | |
dc.subject.keyword | 鋼筋混凝土,開孔牆,側力位移曲線,耐震評估,邊界構材, | zh_TW |
dc.subject.keyword | reinforced concrete,wall with openings,lateral load and displacement curve,seismic evaluation,boundary element, | en |
dc.relation.page | 264 | |
dc.identifier.doi | 10.6342/NTU201801669 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2018-07-18 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-1.pdf 目前未授權公開取用 | 18.79 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。