請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68566
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃尹男(Yin-Nan Huang) | |
dc.contributor.author | Bo-Shaw Lin | en |
dc.contributor.author | 林柏劭 | zh_TW |
dc.date.accessioned | 2021-06-17T02:25:35Z | - |
dc.date.available | 2022-08-31 | |
dc.date.copyright | 2017-08-31 | |
dc.date.issued | 2017 | |
dc.date.submitted | 2017-08-18 | |
dc.identifier.citation | ACI 318-14 (2014). Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan.
ACI 349M (2006). Code requirements for nuclear safety-related concrete structures and commentary, American Concrete Institute, Farmington Hills, Michigan. AISC 341-16 (2016). Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Illinois. AISC N690s1-15 (2014). “Specification for Safety-Related Steel Structures for Nuclear Facilities.” AISC N690s1-15, American Institute of Steel Construction, Chicago, Illinois. Booth, P., Varma, A. H., and Seo, J. (2015). “Lateral load capacity of steel plate composite wall structures.” Transactions, SMiRT-23, Manchester, United Kingdom. Braverman,J.,Morante,R.,Hofmayer,C.,(1997). 'Assessment of Modular Construction for Safety-Related Structures at Advanced Nuclear Power Plants.' U.S. Nuclear Regulatory Commision, Washington,DC,USA. Fujita, T., Funakoshi A., Akita S., and Matsuo I. (1998). “Experimental Study on a Concrete Filled Steel Structure Part 14 thru 17 Bending Shear Tests.” Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, 1121-1128. Fukumoto, T., Kato, B., Sato, K., Toyama, K., and Kobayashi, M. (1987). “Concrete filled steel bearing walls.” IABSE 5. Funakoshi, A., Akita, S., Matsumoto, H., Hara, K., Matsuo, I., and Hayashi, N. (1998). “Experimental study on a concrete filled steel structure Part. 7 Bending Shear Tests (Outline of the experimental program and the results).” Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, 1063-1064. Kurt, E. G., Varma, A. H., Epackachi, S., and Whittaker, A. S. (2015). “Rectangular SC Wall Piers: Summary of Seismic Behavior and Design.” Proceedings, Structures Congress, ASCE, 1042-1051. Ozaki, M., Akita, S., Osuga, H., Nakayama, T., and Adachi, N. (2004). 'Study on steel plate reinforced concrete panels subjected to cyclic in-plane shear.' Nuclear Engineering and Design, 228(1–3), 225-244. Takeuchi, M., Narikawa, M., Matsuo, I., Hara, K., and Usami, S. (1998). Nuclear Engineering and Design. Varma, A. H., Malushte, S. R., Sener, K. C., and Lai, Z. (2014). “Steel-plate composite (SC) walls for safety related nuclear facilities: Design for in-plane forces and out-of-plane moments.” Nuclear Engineering and Design, 269, 240-249. Varma, A. H., Zhang, K., Chi, H., Booth, P. and Baker, T. (2011). “In-plane Shear Behavior of SC composite Walls: Theory vs. Experiment.” Transactions, SMiRT-21, New Delhi, India. 鄭與錚 (2016)。有邊界構材之鋼板混凝土複合牆之耐震行為與試驗研究。國立臺灣大學工學院土木工程學系碩士論文,臺北市。 蔣歡軍,王斌,呂西林(2015),“鋼板混凝土組合筒體抗震性能研究”,第四屆海峽兩岸地震工程青年學者研討會暨第六屆邊界元素法會議。 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68566 | - |
dc.description.abstract | 鋼板混凝土複合牆為新型核能電廠中常見之重要複合材料結構元件,是以兩片鋼板內填充混凝土材料組合而成,鋼板與填充混凝土之間以剪力釘及螺桿作為連接器以傳遞剪力,配置於核能電廠中作為抗垂直力及側向力系統,現今設計規範AISC N690針對鋼板混凝土複合牆提出平面內剪力強度、平面外剪力強度及平面外撓曲強度等設計公式,近年來有研究指出AISC N690之平面內剪力強度估算公式會低估有邊界構材之鋼板混凝土複合牆之剪力強度,並提出修正公式,但該修正並未考慮牆高寬比之影響。
為瞭解有邊界構材之鋼板混凝土複合牆之耐震性能,本研究於國家地震工程研究中心完成四面大尺寸含邊界構材之鋼板混凝土複合牆反覆載重試驗,四座牆皆為剪力主控之試體,本試驗試體之高寬比分別為0.7、1.04及1.46三種,並以厚鋼板作為牆體之邊界構材,藉由調整高寬比及邊界鋼板厚度作為變數,探討不同高寬比與邊界鋼板厚度對於剪力強度之影響,並進一步探討既有規範及文獻中剪力強度建議公式及修正公式之準確性及適用性。 | zh_TW |
dc.description.abstract | Steel-plate composite (SC) walls are composed of steel faceplates, connectors and infill concrete, where the connectors are typically constructed from cross-wall tie rods and shear studs welded to the faceplates. The connectors are used to transfer shear force between faceplate and concrete. The AISC N690s1 provides recommendations for in-plane shear strength, out-of-plane shear strength and out-of-plane flexure strength for steel-plate composite walls. A recent study concludes that the in-plane shear strength of steel-plate composite walls with boundary elements was underestimated in AISC N690 s1, and propose correction formulas. But not including the effect of wall aspect ratio.
The behavior of four SC walls with boundary elements subjected to cyclic in-plane loading is summarized in this study. The experiment was executed in the laboratory of National Center for Research on Earthquake Engineering (NCREE) in Taiwan. Thick steel plates were used as boundary elements of the four specimens. All specimens were designed to be shear critical failure mode, including 1) SCB-5 with an aspect ratio of 0.9 and a thickness of 3 cm for boundary elements, 2) SCB-6 with an aspect ratio of 1.04 and a thickness of 3 cm for boundary elements, 3) SCB-7 with an aspect ratio of 1.04 and a thickness of 5 cm for boundary elements and 4) SCB-8 with an aspect ratio of 1.46 and a thickness of 5 cm for boundary elements. The test results were compared with the recommendations of AISC N690s1 and selected literatures. The impact of wall aspect ratio and boundary element thickness on the in-plane shear strength of SC walls with boundary elements were discussed. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T02:25:35Z (GMT). No. of bitstreams: 1 ntu-106-R04521209-1.pdf: 9084733 bytes, checksum: d7381671c273aa54651e0cfbad87420e (MD5) Previous issue date: 2017 | en |
dc.description.tableofcontents | 誌謝 i
中文摘要 ii ABSTRACT iii 目錄 v 圖目錄 viii 表目錄 xi 第一章 緒論 1 1.1 簡介 1 1.2 研究目的與方法 2 1.3 論文結構 3 第二章 文獻回顧 5 2.1 AISC N690規範剪力強度預測 5 2.2 Kurt et al. (2015)撓曲強度預測 6 2.3 Booth et al. (2015)剪力強度預測 9 2.4 鄭與錚 (2016)有邊界構材之鋼板混凝土複合牆之耐震行為與試驗研究 11 第三章 試體設計與規劃 20 3.1 試驗計畫 20 3.2 初步估計 21 3.3 試體設計 22 3.3.1 牆體 22 3.3.2 基座 23 3.3.3 施力梁與傳力梁 23 3.4 試體施作 23 3.4.1 牆體施作 24 3.5 試驗佈置 25 3.5.1 側撐系統安裝 25 3.5.2 基礎安裝 25 3.5.3 牆體安裝 25 3.5.4 傳力系統安裝 26 3.5.5 試驗施作順序 26 3.6 反覆載重歷時 26 3.7 量測儀器佈置 27 3.7.1 相機佈置 27 3.7.2 NDI佈置 27 3.7.3 應變計佈置 27 3.7.4 位移計佈置 28 3.7.5 石膏漆 29 第四章 試驗結果 55 4.1 材料試驗 55 4.1.1 混凝土 55 4.1.2 鋼材 55 4.2 試驗數據統整 56 4.3 遲滯迴圈 57 4.4 破壞結果探討 59 4.5 應變計量測結果 60 4.6 NDI量測結果 61 4.7 韌性分析 62 4.8 破壞角度 63 第五章 預測結果與試驗結果比較 93 5.1 剪力強度預測Booth et al. (2015)剪力預測公式 93 5.2 剪力強度預測與試驗結果比較 94 第六章 結論與建議 103 6.1 結論 103 6.2 建議 103 參考文獻 105 | |
dc.language.iso | zh-TW | |
dc.title | 含邊界構材之鋼板混凝土複合牆反覆載重試驗研究 | zh_TW |
dc.title | An Experimental Study on Cyclic Behavior of Steel-Plate Composite Walls with Boundary Elements | en |
dc.type | Thesis | |
dc.date.schoolyear | 105-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃世建(Shyh-Jiann Hwang),李宏仁(Hung-Jen Lee),蔡克銓(Keh-Chyuan Tsai) | |
dc.subject.keyword | 鋼板混凝土複合牆,邊界構材,高寬比,擬靜態反覆載重試驗,剪力強度, | zh_TW |
dc.subject.keyword | steel-plate composite wall,boundary element,aspect ratio,cyclic loading,shear strength, | en |
dc.relation.page | 106 | |
dc.identifier.doi | 10.6342/NTU201703799 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2017-08-19 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-1.pdf 目前未授權公開取用 | 8.87 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。