請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68040完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 柯淳涵(Chun-Hank Ke) | |
| dc.contributor.author | Tsung-Jen Yang | en |
| dc.contributor.author | 楊宗仁 | zh_TW |
| dc.date.accessioned | 2021-06-17T02:11:39Z | - |
| dc.date.available | 2018-01-27 | |
| dc.date.copyright | 2018-01-27 | |
| dc.date.issued | 2015 | |
| dc.date.submitted | 2018-01-09 | |
| dc.identifier.citation | Akagi, I. C., W. A. Crossland and T. D. Wilkinson (1998) In Handbook of Liquid Crystals; Demus, D., Goodby, J., Gray, G. W., Spiess, H. W., Vill, V., Eds.; Wiley-VCH: Weinheim, Germany, Vol. 1, Chapter IX.1-IX.2.
Armaroli, N. and V. Balzani (2006) The future of energy supply: Challenges and opportunities. Angewandte Chemie International Edition, 46:52–66. Bang, Y. H., S. Lee, J. Park and H. H. Cho (1999) Effect of coagulation conditions on fine structure of regenerated cellulosic films made from cellulose/N-methylmorpholine-N-oxide/H2O systems. Journal of Applied Polymer Science, 73:2681–2690. Binnemans, K. (2005) Ionic liquid crystals. Chem Rev 105(11): 4148–204. Chang, S. T. (1997) Comparison of the green color fastness of ma bamboo (Dendrocalamus spp.) bamboo culms treated with inorganic salts. Mokuzai Gakkaishi 43:487–492. Chae, D. W., B. C. Kim and W. S. Lee (2002) “Rheological Characterization of Cellulose Solutions in N-Methyl Morpholine N-Oxide Monohydrate.” Journal of Applied Polymer Science. 86:216–222. Chang, C. P., I. C. Wang, K. J. Hung and Y. S. Perng (2010) Preparation and characterization of nanocrystalline cellulose by acid hydrolysis of cotton linter. Taiwan Journal of Forest Science. 25(3), 251–264. Chanzy, H., S. Nawrot, A. Peguy and P. Smith (1982) “Phase Behavior of the Quasiternary System N-Methylmorpholine-N-Oxide, Water, and Cellulose.” Journal of Polymer Science. 20: 1909–1924. Cook, M., Katritzky, A. and M. Manas (1971) The conformational analysis of saturated heterocycles. Part XXXVIII. N-Alkylpiperidine and N-alkylmorpholine N-oxides. Journal of the Chemical Society B: 1330–1334. Cuissinat, C., and P. Navard (2006) Swelling and dissolution of cellulose part 1: free floating cotton and wood fibers in N-methylmorpholine-N-oxide–water mixtures. Macromol. Symp. 244 (1): 1–18. Dence, C. W. (1996) Chemistry of mechanical pulp bleaching. Pulp bleaching-principle and practice, 349–361. Dheu, M. L. and S. Pérez (1980) Programmes Interactifs de Tracés de Molécules et de Structures, CERMAV (CNRS), Grenoble, France. Dogan, H. and N. D. Hilmioglu (2009) Dissolution of cellulose with NMMO by microwave heating. Carbohydrate Polymers, 75:90–94. Eichinger, D. (2012) A vision of the world of cellulosic fibers in 2020. LenzingerBerichte, 90:1–7. Emily, D. C. and G. G. Derek (2008) Birefringence in spin-coated films containing cellulose nanocrystals Colloids and Surfaces A: Physicochem. Eng. Aspects 325 44–51. Fink, H. P., P. Weigel, H. Purz and J. Ganster (2001). Structure formation of regen- erated cellulose materials from NMMO-solutions. Progress in Polymer Science,26(9), 1473–1524. Finkenzeller U (1990) Liquid crystals. Nature’s delicate phase of matter. In: Collings PJ, editor. Handbook. Bristol: Adam Hilger. Adv Mater 1991; 3(10): 518–519. Gray, G., K. Harrison and J. Nash (1973) New family of nematic liquid crystals for displays. Electron. Lett. 9:130−131. Han, G. R. and C. H. Jang (2012) Measuring ligand–receptor binding events on polymeric surfaces with periodic wave patterns using liquid crystals. Colloids and Surfaces B: Biointerfaces 94:89– 94. Hall, M. E., A. R. Horrocks and H. Seddon (1999) The flammability of Lyocell. Polym. Degrad. Stab. 64:505–510. Harmon K. M., A. C. Akin, P. K. Keefer and B. L. Snider (1992) Hydrogen bonding. Part 45. J Mol struct 269:109–21. Ioleva M. M., A. Goikhman, Sh, S. I. Banduryan and S. P. Papkov (1983) Characteristics of the interaction of cellulose with N-methylmorpholine-N-oxide. Vysokomol Soedin Ser B. 25 (11):803–804. Jia, N., S. M. Li, M. G. Ma, R. C. Sun and L. Zhu (2011) Green microwave-assisted syn-thesis of cellulose/calcium silicate nanocomposites in ionic liquids and recycledionic liquids. Carbohydrate Research, 346(18), 2970–2974. Kast, K. M., S. Reiling and J. Brickmann (1998) “Ab initio investigations of hydrogen bonding in aliphatic N-oxide–water systems.” Journal of Molecular Structure (Theochem). Vol. 453:169–180. Kim, S. O., W. J. Shin, H. Cho, B. C. Kim and I. J. Chung (1999) “Rheological Investigation on the Anisotropic Phase of Cellulose-MMNO/H2O Solution System.” Polymer. Vol. 40:6443–6405. Kim, D. B., W. S. Lee, S. M. Jo, M. L. Lee and B. C.Kim (2001) “Effect of Thermal History on the Phase Behavior of N-Methyl Morpholine N-oxide Hydrates and Their Solutions of Cellulose.” Polymer Journal Vol. 33:139–146. The Fiber Year (2013) World survey on textiles & nonwovens 2013. Kim, D. B., S. M. Jo, W. S. Lee and J. J. Pak (2004) “Physical Agglomeration Behavior in Preparation of Cellulose-N-Methyl Morpholine N-oxide Hydrate Solutions by Simple Mixing.” Journal of Applied Polymer Science. Vol. 93:1687-1697. Kim, J., S. Yun and Z. Ounaies (2006) Discovery of cellulose as a smart material. Macromolecules, 39, 4202–4206. Klemm, D., H. P. Schmauder and T. Heinze, (2003) Cellulose. In A. Steinbüchel (Ed.). Biopolymers (Vol. 6, pp. 275–312). Weinheim, Germany: Wiley–VCH Verlag GmbH & Co. Klemm, D., B. Philipp, T. Heinze, U. Heinze, and W. Wagenknecht (1998) Comprehensive Cellulose Chemistry: Fundamental and Analytical Methods, vol. 1. Klemm, D., B. Heublein, H. P. Fink and A. Bohn (2005) Cellulose: Fascinating biopoly-mer and sustainable raw material. Angewandte Chemie International Edition,44(22), 3358–3393. Klemm D., B. Heublein, H. P. Fink, and A. Bohn (2005) Cellulose: Fascinating Biopolymer and Sustainable Raw Material. Polymer Science. 44:3358–3393. Köster R and Y. Morita (1967) Quantitative Bestimmung verschiedener B-Funktionen in organischen Borverbindungen durch Oxydation mit Trimethylamin-N-oxyd. Liebigs Ann Chem;704:70–90. Laity, P. R., P. M. Glover and J. N. Hay (2002) ”Composition Phase Changes Observed by Magnetic Resonance Imaging During Non-solvent Induced Coagulation of Cellulose.” Polymer. Vol. 43:5827–5837. Linton, E. P. (1940) The dipole moment of amine oxides. Journal of the American Chemical Society, 62:1945–1948. Soroceanu, M., A. I. Barzic, I. Stoica, L. Sacarescu, V. Harabagiu (2014) The influence of polysilane chemical structure on optical properties, rubbed film morphology and LC alignment. eXPRESS Polymer Letters Vol.9, No.5:456–468 Nishikawa, M., N. Bessho, T. Natsui, Y. Ohta, N. Yoshida, D. -S. Seo, Y. Iimura, and S. Kobayashi (1996) A Model of the Unidirectional Alignment Accompanying the Pretilt Angle of a Nematic Liquid Crystal (NLC), 5CB, Oriented on Rubbed Organic Solvent-Soluble Polyimide Film. Molecular Crystals and Liquid Crystals Science and Technology. Section A. Molecular Crystals and Liquid Crystals, 275:1, 15–25. Marhöfer, R. J., K. M. Kast, B. Schilling, H. J. Bär, S. M. Kast and J. Brickmann, (2000) “Molecular dynamics simulations of tertiary systems of cellohexaose/aliphatic Noxide/water.” Macromolecular Chemistry and Physics, 201:2003–2007. Medronho, B. and B. Lindman, (2014) Brief overview on cellulose dissolu-tion/regeneration interactions and mechanisms. Advances in Colloid and Interface Science. Moussa F., J. J. Benattar and C. Williams (1983) Positional order and bond orientational order in the liquid crystal smectic F phase. Mol Cryst Liq Cryst 99(1):145–54. Mohanty, A., M. Misra and L. Drzal, (2002) Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world. Journal of Polymers and the Environment, 10:19–26. Moreno-Razo, J. A., E. J. Sambriski, N. L. Abbott, J. P. Hernandez-Ortiz and J. J. de Pablo (2012) Liquid-crystal-mediated self-assembly at nanodroplet interfaces. Nature 485:86−89. Musevic, I., M. Skarabot, U. Tkalec, M. Ravnik and S. Zumer (2006) Science 2006, 313, 954. N. A. J. M. van Aerle, M. Barmentlo and R. W. J. Hollering, J. Appl. Phys., 74,3111 (1993). Navard, P. and J. M. Haudin (1981) Etude thermique de la N-methylmorpholine-N-oxyde et de sa complexation avecl’eau. J Therm Anal 22:107–118. Pan, G. X., J. L. Bolton and G. J. Leary (1998) Determination of ferulic and p-coumaric acids in wheat straw and the amounts released by mild acid and alkaline peroxide treatment. Journal of Agriculture and Food Chemistry, 46, 5283–5288. Petrovan, S., I. Negulescu and J. Collier (2001) “Elongational and Shear Rheology of Cellulosic and Lignocellulosic Solutions in N-Methylmorpholine- N-Oxide Monohydrate.” Cellulose Chemistry and Technology 35:89–102. Raili Pönni (2014) Changes in accessibility of cellulose for kraft pulps measured by deuterium exchange. Department of Forest Products Technology 68. Rosenau, T., A. Hofinger, A. Potthast, and P. Kosma (2003) On the conformation of the cellulose solvent N-methylmorpholine-N-oxide (NMMO) in solution. Polymer, 44:6153–6158. Roesnau, T., A. Potthast, H. Sixta and P. Kosma (2001) “The Chemistry of Side Reaction and Byproduct Formation in the System NMMO/Cellulose (Lyocell Process).” Progress in Polymer Science. 26:1763–1837. Sato, O., S. Kubo, and Z. Z. Gu (2009) Acc. Chem. Res. 42, 1. Sara R. Labafzadeh (2015) Cellulose-base materials. Schurz J. (1999) ‘Trends in Polymer Science’ A bright future for cellulose. Progress in polymer science. 21:481–483. Siró, I., D. Plackett (2010) Microfibrillated cellulose and new nanocomposite materials: A review. Cellulose, 17(3): 459–494. Sonderquist, J. A. and C. L. Anderson (1986) Crystalline anhydrous trimethylamine N-oxide. Tetrahedron Lett 27:3961–3962. Strunk, P., Å . Lindgren, B. Eliasson and R. Agenemo (2012) Chemical changes of cellulose pulps in the processing to viscose dope. Cellulose Chemistry and Technology 46(9): 559–569. Suhana, M. S., Z. S. Z. Ahmad, A. K. Muhammad, M. Azizah, S. Balamurugan and S. M. Nor (2015) Polymer electrolyte liquid crystal system for improved optical and electrical properties. T. Sugiyama, S. Kuniyasu, D.-S. Seo, H. Fukuro and S. Kobayshi (1990) Jpn. J. Appl. Phys., 29:2045. Turner, M. B., S. K. Spear, J. D. Holbrey, D. T. Daly and R. D. Rogers (2005) Ionic liquid-reconstituted cellulose composites as solid support matrices for biocatalyst immobilization. Biomacromolecules, 6:2497–2502. Wan, Y., H. Wu, A. X. u and D. Y. Wen (2006) Biodegradable polylactide/chitosanblend membranes. Biomacromolecules, 7(4), 1362–1372. Whitmer, J. K., X. Wang, F. Mondiot, D. S. Miller, N. L. Abbott and J. J. de Pablo (2008) Nematic-Field-Driven Positioning of Particles in Liquid Crystal Droplets. Phys. Rev. Lett. 2013, 111, 227801. Xia, Y.; Verduzco, R.; Grubbs, R. H.; Kornfield, J. A. J. Am. Chem. Soc. 130, 1735. Ma X., L. Huang, Y. Chen, S. Cao, and L. Chen (2011) Preparation of bamboo dissolved pulp for textile production. Part1. Study on prehydrolysis of green bamboo for producing dissolved pulp. Bioresources 6(2), 1428-1439. Zhang Y., H. Li, X. Li, M. E. Gibril, and M. Yu (2014) Chemical modification of cellulose by in situ reactive extrusion in ionic liquid. Carbohydrate polymers. 99:126–131. Zhong L. X., X. W. Peng, D. Yang, X. F. Cao, and R. C. Sun (2013) Long-chain anhydridemodification: A new strategy for preparing xylan films. Agricultural and Food Chemistry, 61(3), 655–661. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68040 | - |
| dc.description.abstract | 纖維素為大自然中最豐富的綠色高分子材料，每年平均由植物細胞壁中可得約有1×1011公噸產量。因其具有生物可降解性、可再生、以及對環境衝擊小等性質。然而麻竹中含有40-50%的纖維素，其具有高生長速度及可再生性，並富有韌性與光澤，是一種具有高度潛力與成長空間的經濟樹種。本研究主要以市售的竹漿漿板，並使用對環境較為友善，且具有高回收特性的N-甲基嗎晽-N的氧化物水溶液(NMMO)作為溶劑，用來溶解市售的竹漿漿板，並製造成再生纖維素薄膜。此外也使用氫氧化鈉及過氧化氫作為竹漿漿板的前處理溶劑，用來探討經前處理後所製成的薄膜使否具有差異性。而本研究主要目的為觀測在薄膜表面的纖維束，使其朝同一方向排列並具有特定的方向性，以及使這些細小的纖維具備整齊度和均質的特性。然而只要藉由添加商用的室溫液晶(5CB)至薄膜表面，就可以簡便的在偏光顯微鏡(POM)下進行表面纖維束的觀測。除此之外，纖維排列的方向性也可藉由掃描式電子顯微鏡(SEM)進行觀測，故可藉此來證明，以POM取代複雜且耗時的SEM，用來觀測纖維束在薄膜表面上方向性的可行性。
根據結果顯示，再生纖維素薄膜表面的纖維方向性，會受到轉速及紙漿濃度的影響，隨著轉速提高及紙漿濃度降低，使其纖維排列的方向性較為明顯。此外黏度和聚合度也是影響纖維排列的重要因子，由氫氧化鈉或過氧化氫處理後的竹漿，其聚合度會明顯降低許多。如果在相同紙漿濃度的情形下，經過NMMO溶解後可以發現到殘留的粗纖維明顯減少，而對於製造而得的再生纖維素薄膜，其纖維排列的方向性也變得較明確。此外也可以發現到，因為聚合度的降低，導致所製造而得的薄膜，其較為平整且均質。因此纖維在薄膜表面上具有特定方向性以及平整且均勻度高的薄膜，將可利用在不同的範疇中。 | zh_TW |
| dc.description.abstract | This research depends on using N-methylmorpholine-N-oxide (NMMO) solution as solvent toward commercial dissolved pulps to produce regenerated cellulose films, whereas sodium hydroxide (NaOH) and hydrogen peroxide (H2O2) is used as the pretreatment of solution. The purpose is to make the fiber bundles neatly and homogeneously aligned in the same direction on the surface of films. We can observe the arrangement of fiber bundles or liquid crystals simply by adding the 4-Cyano-4'-pentylbiphenyl (5CB) in the surface under the polarizing optical microscope (POM) and verify the results by using the scanning electron microscope (SEM). In this case, it is a simple operation by POM which can replace the complex and time-consuming SEM.
The results indicate that the orientation of fiber bundles on the surface of regenerated cellulose film is obvious by increasing the rotational speed or decreasing the concentration of pulps. However, the viscosity and degree of polymerization (DP) are also important factors. The DP value will be reduced after pretreatment of the sodium hydroxide (NaOH) or hydrogen peroxide (H2O2) with different time resulting in the evident arrangement of fiber bundles. The arrangement of fiber bundles is indeed the same as the spinning tangential direction. As a result, this regenerated cellulose film can be applied in many different fields. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-17T02:11:39Z (GMT). No. of bitstreams: 1 ntu-104-R02625038-1.pdf: 9772737 bytes, checksum: 6400a966f4248b237982087e37bc6ecd (MD5) Previous issue date: 2015 | en |
| dc.description.tableofcontents | 摘要....................................................................................................................................i
Abstract.............................................................................................................................ii Contents............................................................................................................................iii Figures index.....................................................................................................................v Tables index...................................................................................................................viii Chapter 1 Introduction...................................................................................................1 Chapter 2 Literature review...........................................................................................4 2.1. Cellulose.....................................................................................................................4 2.1.1. The property and structure of cellulose...............................................................4 2.1.2. The derivatives of cellulose.................................................................................5 2.2. The Cellulose-NMMO solvent system.....................................................................6 2.2.1. Application of NMMO for cellulose dissolution..................................................6 2.2.2. The mechanism of cellulose dissolution...............................................................8 2.2.3. The morphology and restrict of using toward NMMO..........................................9 2.2.4. The effective factor of cellulose dissolution.......................................................12 2.2.5. The negative of side reactions.............................................................................14 2.3. The production of regenerated cellulose films.......................................................15 2.3.1. The properties of regenerated cellulose films.....................................................15 2.3.2. The morphology of films with the blow-extrustion process...............................17 2.3.3. The morphology of regenerated cellulose films with microwave heating….......18 2.3.4. The factors of regenerated cellulose films..........................................................19 2.4. The application of the liquid crystals, 4-Cyano-4'-pentylbiphenyl......................20 2.4.1. The different kinds and characteristics of the liquid crystals..............................20 2.4.2. The properties of 4-Cyano-4'-pentylbiphenyl (5CB)..........................................21 2.4.3. The application of 5CB.......................................................................................22 Chapter 3 Materials and Methodologies......................................................................26 3.1. Research framework...............................................................................................26 3.2. Materials..................................................................................................................26 3.2.1. Biomass..............................................................................................................26 3.2.2. Liquid crystals....................................................................................................27 3.2.3. solvent................................................................................................................27 3.3. Methodologies..........................................................................................................27 3.3.1. Chemical composition........................................................................................27 3.3.2. Sodium hydroxide and hydrogen peroxide treatments........................................28 3.3.3. Preparation of regenerated cellulose films..........................................................28 3.3.4. Degree of polymerization.…..............................................................................29 3.3.5. X-ray diffraction (XRD) analysis.......................................................................30 3.3.6. Thickness...........................................................................................................30 3.3.7. Elemental analyzer.............................................................................................31 3.3.8. Polarizing optical microscope............................................................................31 3.3.9. Scanning electron microscope............................................................................32 Chapter 4 Results and discussion..................................................................................33 4.1. The chemical properties and DP value for pulps...................................................33 4.1.1. The chemical composition and viscosity for bamboo pulps................................33 4.1.2. The DP value for pulps after pretreatment of alkali or hydrogen peroxide…......33 4.2. The properties of regenerated cellulose films.......................................................35 4.2.1. The thickness of films from commercial dissolved pulps ..................................35 4.2.2. The thickness of films from commercial dissolved pulps after pretreatment.….37 4.2.3. The composition of regenerated cellulose films.................................................39 4.3. Testing of films alignment ability from commercial dissolved pulp.…………...41 4.3.1. The raw materials of commercial dissolved pulp...............................................41 4.3.2. The regenerated cellulose films from 3 wt% of pulps……………………...…..42 4.3.3. The regenerated cellulose films from 2 wt% of pulps.........................................50 4.3.4. The regenerated cellulose films from 1.5 wt% of pulps.…………….………....55 4.3.5. The regenerated cellulose films from 1 wt% of pulps.…………….……….......59 4.4. Testing of films alignment ability from pretreatment of pulps…………………62 4.4.1. The films from 3 wt% of dissolved pulps after treatment of NaOH....................62 4.4.2. The films from 3 wt% of dissolved pulps after treatment of H2O2 for 4hr...........67 4.4.3. The films from 3 wt% of dissolved pulps after treatment of H2O2 for 8hr……...71 4.5. Morphology of the regenerated cellulose films......................................................75 4.5.1. The surface of films from 3 wt% of commercial dissolved pulps…………........75 4.5.2. The surface of films from 2 wt% of commercial dissolved pulps……………....78 4.5.3. The surface of films from 1.5 wt% of commercial dissolved pulps.....................79 4.5.4. The surface of films from 1 wt% of commercial dissolved pulps........................80 4.5.5. The surface of films from 3 wt% of pulps after treatment with NaOH for 8hr.…81 4.5.6. The surface of films from 3 wt% of pulps after treatment with H2O2 for 4hr…...82 4.5.7. The surface of films from 3 wt% of pulps after treatment with H2O2 for 8hr.…..84 Chapter 5 Conclusions ..................................................................................................85 Chapter 6 References ....................................................................................................87 | |
| dc.language.iso | en | |
| dc.subject | 纖維束 | zh_TW |
| dc.subject | N-甲基嗎?-N-氧化物(NMMO) | zh_TW |
| dc.subject | 偏光顯微鏡 | zh_TW |
| dc.subject | 溶解漿 | zh_TW |
| dc.subject | 再生纖維素薄膜 | zh_TW |
| dc.subject | 方向性 | zh_TW |
| dc.subject | Orientation | en |
| dc.subject | dissolved pulps | en |
| dc.subject | Regenerated cellulose film | en |
| dc.subject | Fiber bundles | en |
| dc.subject | N-methylmorpholine-N-oxide (NMMO) | en |
| dc.subject | Polarizing optical microscope (POM) | en |
| dc.title | 再生纖維素薄膜之纖維方向性與其性質探討 | zh_TW |
| dc.title | Arrangement of Cellulose on the surface and Properties of Regenerated Cellulose Films | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 106-1 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 徐秀福(Xiu-Fu Xu),施增廉,張芳志 | |
| dc.subject.keyword | N-甲基嗎?-N-氧化物(NMMO),偏光顯微鏡,溶解漿,再生纖維素薄膜,纖維束,方向性, | zh_TW |
| dc.subject.keyword | N-methylmorpholine-N-oxide (NMMO),Polarizing optical microscope (POM),dissolved pulps,Regenerated cellulose film,Fiber bundles,Orientation, | en |
| dc.relation.page | 93 | |
| dc.identifier.doi | 10.6342/NTU201800036 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2018-01-09 | |
| dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
| dc.contributor.author-dept | 森林環境暨資源學研究所 | zh_TW |
| 顯示於系所單位： | 森林環境暨資源學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-104-1.pdf 未授權公開取用 | 9.54 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。