請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67706
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳炳煇(Ping-Hei Chen) | |
dc.contributor.author | Yao-Wen Chang | en |
dc.contributor.author | 張耀文 | zh_TW |
dc.date.accessioned | 2021-06-17T01:45:13Z | - |
dc.date.available | 2019-08-01 | |
dc.date.copyright | 2017-08-01 | |
dc.date.issued | 2017 | |
dc.date.submitted | 2017-07-26 | |
dc.identifier.citation | [1] C. S. S. Kumar, S. Suresh, L. Z. Yang, Q. Q. Yang, and S. Aravind, 'Flow boiling heat transfer enhancement using carbon nanotube coatings,' Applied Thermal Engineering, vol. 65, pp. 166-175, 2014.
[2] D. Deng, R. Chen, Y. Tang, L. Lu, T. Zeng, and W. Wana, 'A comparative study of flow boiling performance in reentrant copper microchannels and reentrant porous microchannels with multi-scale rough surface,' International Journal of Multiphase Flow, vol. 72, pp. 275-287, 2015. [3] J. M. Kim, S. H. Kang, D. I. Yu, H. S. Park, K. Moriyama, and M. H. Kim, 'Smart surface in flow boiling: Spontaneous change of wettability,' International Journal of Heat and Mass Transfer, vol. 105, pp. 147-156, 2017. [4] L. W. Fan, J. Q. Li, L. Zhang, Z. T. Yu, and K. F. Cen, 'Pool boiling heat transfer on a nanoscale roughness-enhanced superhydrophilic surface for accelerated quenching in water,' Applied Thermal Engineering, vol. 109, pp. 630-639, 2016. [5] J. Kim, S. Jun, R. Laksnarain, and S. M. You, 'Effect of surface roughness on pool boiling heat transfer at a heated surface having moderate wettability,' International Journal of Heat and Mass Transfer, vol. 101, pp. 992-1002, 2016. [6] Y. T. Cheng, D. E. Rodak, C. A. Wong, and C. A. Hayden, 'Effects of micro- and nano-structures on the self-cleaning behaviour of lotus leaves,' Nanotechnology, vol. 17, pp. 1359-1362, 2006. [7] P. Roach, N. J. Shirtcliffe, and M. I. Newton, 'Progess in superhydrophobic surface development,' Soft Matter, vol. 4, pp. 224-240, 2008. [8] R. P. Rioux, E. C. Nolan, and C. H. Li, 'A systematic study of pool boiling heat transfer on structured porous surfaces: From nanoscale through microscale to macroscale,' AIP Advances, vol. 4, 2014. [9] D. I. Shim, G. Choi, N. Lee, T. Kim, B. S. Kim, and H. H. Cho, 'Enhancement of pool boiling heat transfer using aligned silicon nanowire arrays,' ACS Applied Materials & Interfaces, vol. 9, pp. 17595-17602, 2017. [10] D. J. Huang and T. S. Leu, 'Fabrication of high heterogeneous on copper substrate,' Applied Surface Science, vol. 280, pp. 25-32, 2013. [11] J. Bravo, L. Zhai, Z. Z. Wu, R. E. Cohen, and M. F. Rubner, 'Transparent superhydrophobic films based on silica nanoparticles,' Langmuir, vol. 23, pp. 7293-7298, 2007. [12] G. H. Seo, U. Jeong, H. H. Son, D. Shin, and S. J. Kim, 'Effects of layer-by-layer assembled PEI/MWCNT surfaces on enhanced pool boiling critical heat flux,' International Journal of Heat and Mass Transfer, vol. 109, pp. 564-576, 2017. [13] E. Forrest, E. Williamson, J. Buongiorno, L. W. Hu, M. Rubner, and R. Cohen, 'Augmentation of nucleate boiling heat transfer and critical heat flux using nanoparticle thin-film coatings,' International Journal of Heat and Mass Transfer, vol. 53, pp. 58-67, 2010. [14] C. C. Hsu, T. W. Su, and P. H. Chen, 'Pool boiling of nanoparticle-modified surface with interlaced wettability,' Nanoscale Research Letters, vol. 7, 2012. [15] C.C. Hsu, M.R. Lee, C.H Wu, and P. H. Chen, 'Effect of interlaced wettability on horizontal copper cylinders in nucleate pool boiling,' Applied Thermal Engineering, vol. 112, pp. 1187-1194, 2017. [16] C.S. Sujith Kumar, Y. W. Chang, and P. H. Chen, 'Pool boiling heat transfer enhancement on cylindrical surfaces with hybrid wettable patterns,' Journal of Visualized Experiments, 2017. [17] M. Y. Tsaia, C. C. Hsua, P. H. Chen, C. S. Linb, and A. Chen, 'Surface modification on a glass surface with a combination technique of sol - gel and air brushing processes,' Applied Surface Science, vol. 257, pp. 8640-8646, 2011. [18] P. H. Chen, C.C. Hsu, P. S. Lee, and C. S. Lin, 'Fabrication of semi-transparent super-hydrophobic surface based on silica hierarchical structures,' Journal of Mechanical Science and Technology, vol. 25, pp. 43-47, 2011. [19] C. H. Wu, Y. S. Huang, L. S. Kuo, and P. H. Chen, 'The effects of boundary wettability on turbulent natural convection heat transfer in a rectangular enclosure,' International Journal of Heat and Mass Transfer, vol. 63, pp. 249-254, 2013. [20] X. Q. L. Dong and P. Cheng, 'An experimental investigation of enhanced pool boiling heat transfer from surfaces with micro/nano-structures,' International Journal of Heat and Mass Transfer, vol. 71, pp. 189-196, 2014. [21] H. M. Kurihara and J. E. Myers, 'The effects of superheat and surface roughness on boiling coefficients,' AIChE Journal, vol. 6, pp. 83-91, 1960. [22] R. I. Vachon, G. E. Tanger, D. L. Davis, and G. H. Nix, 'Pool boiling on polished and chemically etched stainless-steel surfaces,' Journal of Heat Transfer, vol. 90, pp. 231-238, 1968. [23] B. J. Jones, J. P. McHale, and S. V. Garimella, 'The influence of surface roughness on nucleate pool boiling heat transfer,' Journal of Heat Transfer-Transactions of the ASME, vol. 131, 2009. [24] J. Kim, S. Jun, J. Lee, J. Godinez, and S. M. You, 'Effect of surface roughness on pool boiling heat transfer of water on a superhydrophilic aluminum surface,' Journal of Heat Transfer-Transactions of the ASME, vol. 139, 2017. [25] S. M. You, J. H. Kim, and K. H. Kim, 'Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer,' Applied Physics Letters, vol. 83, pp. 3374-3376, 2003. [26] P. Vassallo, R. Kumar, and S. D’Amico, 'Pool boiling heat transfer experiments in silica–water nano-fluids,' International Journal of Heat and Mass Transfer, vol. 47, pp. 407-411, 2004. [27] I. C. Bang and S. H. Chang, 'Boiling heat transfer performance and phenomena of Al2O3-water nano-fluids from a plain surface in a pool,' International Journal of Heat and Mass Transfer, vol. 48, pp. 2407-2419, 2005. [28] H. D. Kim, J. Kim, and M. H. Kim, 'Experimental studies on CHF characteristics of nano-fluids at pool boiling,' International Journal of Multiphase Flow, vol. 33, pp. 691-706, 2007. [29] S. M. S. Murshed and C. A. N. d. Castro, 'Superior thermal features of carbon nanotubes-based nanofluids - a review,' Renewable and sustainable energy reviews, vol. 37, pp. 155-167, 2014. [30] K. J. Park, D. G. Kang, D. Jung, and S. E. Shim, 'Nucleate boiling heat transfer in nanofluids with carbon nanotubes up to critical heat fluxes,' Journal of Mechanical Science and Technology, vol. 25, pp. 2647-2655, 2011. [31] M. McCarthy, K. Gerasopoulos, S. C. Maroo, and A. J. Hart, 'Materials, fabrication, and manufacturing of micro/nanostructured surfaces for phase change heat transfer enhancement,' Nanoscale and Microscale Thermophysical Engineering, vol. 18, pp. 288-310, 2014. [32] S. Jun, J. Kim, S. M. You, and H. Y. Kim, 'Effect of heater orientation on pool boiling heat transfer from sintered copper microporous coating in saturated water,' International Journal of Heat and Mass Transfer, vol. 103, pp. 277-284, 2016. [33] A. Jaikumar and S. G. Kandlikar, 'Pool boiling enhancement through bubble induced convective liquid flow in feeder microchannels,' Applied Physics Letters, vol. 108, 2016. [34] S. Das, D.S. Kumar, and S. Bhaumik, 'Experimental study of nucleate pool boiling heat transfer of water on silicon oxide nanoparticle coated copper heating surface,' Applied Thermal Engineering, vol. 96, pp. 555-567, 2016. [35] M. Dharmendra, S. Suresh, C.S. Sujith Kumar, and Q. Yang, 'Pool boiling heat transfer enhancement using vertically aligned carbon nanotube coatings on a copper substrate,' Applied Thermal Engineering, vol. 99, pp. 61-71, 2016. [36] S. Das, B. Saha, and S. Bhaumik, 'Experimental study of nucleate pool boiling heat transfer of water by surface functionalization with crystalline TiO2 nanostructure,' Applied Thermal Engineering, vol. 113, pp. 1245-1357, 2017. [37] H. Jo, H. S. Ahn, S. Kane, and M. H. Kim, 'A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces,' International Journal of Heat and Mass Transfer, vol. 54, pp. 5643-5652, 2011. [38] C. C. Hsu, W. C. Chiu, L. S. Kuo, and P. H. Chen, 'Reversed boiling curve phenomenon on surfaces with interlaced wettability,' AIP Advances, vol. 4, 2014. [39] A. R. Betz, J. Xu, H. H. Qiu, and D. Attinger, 'Do surfaces with mixed hydrophilic and hydrophobic areas enhance pool boiling?,' Applied Physics Letters, vol. 97, 2010. [40] A. R. Betz, J. Jenkins, C. J. Kim, and D. Attinger, 'Boiling heat transfer on superhydrophilic, superhydrophobic, and superbiphilic surfaces,' International Journal of Heat and Mass Transfer, vol. 57, pp. 733-741, 2013. [41] H. J. Jo, D. I. Yu, H. Noh, H. S. Park, and M. H. Kim, 'Boiling on spatially controlled heterogeneous surfaces: Wettability patterns on microstructures,' Applied Physics Letters, vol. 106, pp. 181602-181606, 2015. [42] C. H. Choi, M. David, Z. Gao, A. Chang, M. Allen, H. Wang, et al., 'Large-scale generation of patternedbubble arrays on printed bi-functional boiling surfaces,' Nature Scientific Reports, vol. 6, 2016. [43] H. He, K. Furusato, M. Yamada, B. Shen, S. Hidaka, M. Kohno, et al., 'Efficiency enhancement of a loop thermosyphon on a mixed-wettability evaporator surface,' Applied Thermal Engineering, vol. 123, pp. 1245-1254, 2017. [44] M. M. Rahman, J. Pollack, and M. McCarthy, 'Increasing boiling heat transfer using low conductivity materials,' Nature Scientific Reports, vol. 5, 2015. [45] D. J. Huang and T. S. Leu, 'Fabrication of a wettability-gradient surface on copper by screen-printing techniques,' Journal of Micromechanics and Microengineering, vol. 25, 2015. [46] T. Young, 'An essay on the cohesion of fluids,' Philosophical Transactions of the Royal Society of London, vol. 95, pp. 65-87, 1805. [47] R. N. Wenzel, 'Resistance of solid surfaces to wetting by water,' Industrial and Engineering Chemistry, vol. 28, pp. 988-994, 1936. [48] A. B. D. Cassie and S. Baxter, 'Wettability of porous surfaces.,' Transactions of the Faraday Society, vol. 40, pp. 0546-0550, 1944. [49] S. Nukiyama, 'Maximum and minimum values of heat Q transmitted from metal to boiling water under atmospheric pressure,' Journal of the Japan Society of Mechanical Engineers, vol. 37, pp. 367-374, 1934. [50] S. G. Bankoff, 'Ebullition from solid surfaces in the absence of a pre-existing gaseous phase,' Journal of Heat Transfer-Transactions of the ASME, vol. 79, pp. 735–740, 1957. [51] W. Fritz, 'Maximum volume of vapor bubbles,' Physikalische Zeitschrift, vol. 36, pp. 379-384, 1935. [52] E. Nolan, R. Rioux, P. X. Jiang, G. P. Peterson, and C. H. Li, 'Experimental study of contact angle and active nuleation site distribution on nanostructure modified copper surface in pool boiling heat transfer enhancement,' Heat Transfer Research, vol. 44, pp. 115-131, 2013. [53] J. H. Lienhard IV and J. H. Lienhard V, 'A Heat Transfer Textbook,' Phlogiston Press, 2008. [54] H. T. Phan, N. Caney, P. Marty, S. Colasson, and J. Gavillet, 'Surface wettability control by nanocoating: The effects on pool boiling heat transfer and nucleation mechanism,' International Journal of Heat and Mass Transfer, vol. 52, pp. 5459-5471, 2009. [55] J. R. Taylor, An introduction to error analysis: the study of uncertainties in physical measurements, 2nd ed. Sausalito, California: University Science Books, 1997. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/67706 | - |
dc.description.abstract | 本研究使用外徑25 mm、內徑18 mm和長40 mm的中空紅銅圓管,以外側曲面進行點狀的表面改質。 其中,使用不同尺寸和間距的方形疏水圖案以及不同潤濕性梯度結構來製造非均質濕潤性表面,以觀察非均質潤濕性表面對於池沸騰熱傳表現的影響做為目標。 在池沸騰實驗中,使用去離子水為工作流體且在飽和的情況下進行,觀察不同非均質潤濕性表面對於沸騰的氣泡動力學。 之後,以8個量測孔溫度推算表面溫度、熱通量以及池沸騰傳熱係數,評估不同非均質潤濕性表面對於池沸騰熱傳表現的影響。
本研究的實驗分為二部分,首先,使用不同尺寸和間距的方形疏水圖案來製造非均質濕潤性表面。 實驗結果顯示,中心點間距為5 mm且2 mm尺寸的方形圖案是所有設計結構中對於沸騰熱傳表現影響最優異的一項。 由於這種結構適當地整合了氣泡聚結行為的優點,並且還保留了用於再潤濕表面的流動路徑。 另外,本研究利用高速攝影機所記錄的圖片觀察氣泡脫離直徑大小,量測約為2.35 mm,與相關公式所預測的氣泡脫離直徑2.33 mm相當接近;同時,利用建立氣泡模型的方式,預測圖案之間要發生氣泡橫向結合的最大間隔距離,估計約為3.12 mm,此間隔距離影響是否提早發生橫向氣泡結,來間接影響再潤濕表面的流動路徑,造成不同的池沸騰熱傳表現結果。 接著,配合前述最佳的方型圖案大小和間距,搭配不同潤濕性表面組合出不同潤濕性梯度結構。 結果顯示,在疏水性聚合物圖案分別於未改質紅銅表面環境和超親水性環境下,兩者的池沸騰熱傳表現皆有顯著地增強。 與未改質的紅銅圓管表面相比,於15kW/m2熱通量情況下,沸騰熱傳係數增強比率分別約為98.5%和89.8 %。 整體沸騰熱傳表現中,以疏水性聚合物圖案於未改質紅銅表面環境表現最佳,次之為疏水性聚合物圖案於超親水性環境之組合。 由於每個潤濕性梯度結構下,皆有不同的氣泡聚結方式和表現。 因此,隨著熱通量的提升所產生的沸騰傳熱表現差異進而隨之擴大。 | zh_TW |
dc.description.abstract | In this study, pool boiling heat transfer experiments are conducted to investigate the effect of the heterogeneous wettable surfaces with various size and pitch of square patterns and different heterogeneous structures. The heat transfer experiments were carried out on a hollow copper cylinder of 25 mm outer diameter and 40 mm long, using the de-ionized (DI) water as the working fluid. The influences of heterogeneous wettable surfaces on the boiling bubble dynamics, heat fluxes, surface temperatures and the average heat transfer coefficient (HTC) are investigated at the saturated boiling condition.
In this work, among the various square patterns of different size and pitch, 2 mm size of the square pattern with 5 mm pitch (inter-distance = 3 mm) is the best one; due to such surface properly integrate the advantages of the bubble coalescence behavior and also the rewetting phenomenon. In addition, the observed bubble departure diameter is 2.35 mm, which is close to the predicted diameter (2.33 mm) by using the correlation formula. The maximum predicted inter-distance of patterns under the axial inter coalescence of bubble happening is 3.12 mm. It is the significant parameter that determines the earlier axial inter coalescence of bubbles takes place or not. Furthermore, heterogeneous structures show an appreciable enhancement in HTC in the cases of hydrophobic polymer patterns, with the plain copper and superhydrophilic surroundings. Both structures produce the enhancement of 98.5 % and 89.8 %, in the HTC, respectively, at low heat flux region compared to the plain copper surface. However, the boiling heat transfer performance is distinct with an increase in heat flux, because of the different bubble coalescence behaviors. | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T01:45:13Z (GMT). No. of bitstreams: 1 ntu-106-R04522305-1.pdf: 7513406 bytes, checksum: 9485f49795cad71e023b67711230f6c3 (MD5) Previous issue date: 2017 | en |
dc.description.tableofcontents | 口試委員審定書 i
誌謝 ii 摘要 iii ABSTRACT iv NOMENCLATURE v ABBREVIATIONS viii CONTENTS ix LIST OF FIGURES xii LIST OF TABLES xix Chapter 1 Introduction 1 1.1 Preface 1 1.2 Literature Review 2 1.2.1 Boiling Heat Transfer 2 1.2.2 Surface Modification 3 1.2.3 Effect of the Homogeneous Wettability on Pool Boiling Heat Transfer 7 1.2.4 Effect of the Heterogeneous Wettability on Pool Boiling Heat Transfer 15 1.3 Purpose 24 Chapter 2 Theory 25 2.1 Surface Energy 25 2.2 Surface Wettability and Static Contact Angle 26 2.2.1 Young’s Equation 26 2.2.2 Wenzel’s Model 27 2.2.3 Cassie-Baxter Model 28 2.3 Principle of Sol-gel Process 28 2.4 Screen Printing Technique 30 2.5 Pool Boiling Heat Transfer Curve 31 2.6 Required Energy Relationship between the Contact Angle and Vapor Bubble Generation 32 2.7 Theoretical Model of Heterogeneous Wettability 33 Chapter 3 Experimental Methodology 41 3.1 Surface Modification 41 3.1.1 Preparation of Copper Test Piece 41 3.1.2 Preparation of Homogeneous Silicon Dioxide (Sio2) Coating 41 3.1.3 Preparation of the Polymer Mixture for Screen Printing 42 3.1.4 Preparation of the Heterogeneous Wettable Surfaces with Various Size and Pitch of Square Patterns and Heterogeneous Structures 42 3.2 Instruments 47 3.2.1 Surface Morphology 47 3.2.2 Coating Thickness and Surface Roughness 47 3.2.3 Surface Wettability 47 3.3 Pool Boiling Heat transfer Experimental System 49 3.3.1 Test Section 49 3.3.2 Important Devices Used for Pool Boiling Heat Transfer 50 3.4 Experimental Procedure 57 3.5 Data Reduction 57 3.6 Uncertainty Analysis 59 Chapter 4 Experimental Results and Discussion 60 4.1 Characterization Results 60 4.1.1 Surface Morphology 60 4.1.2 Coating Thickness and Surface Roughness 60 4.1.3 Surface Wettability 61 4.2 Uncertainty Analysis 66 4.3 Effect of Various Size and Pitch Patterns on Pool Boiling Heat Transfer 67 4.3.1 Bubble dynamics 67 4.3.2 Pool Boiling Heat Transfer Performance 68 4.4 Effect of Heterogeneous Structures on Pool Boiling Heat Transfer 82 4.4.1 Bubble dynamics 82 4.4.2 Pool Boiling Heat Transfer Performance 83 Chapter 5 Conclusions and Future Prospects 89 5.1 Conclusions 89 5.2 Future Prospects 91 Appendix Ⅰ 92 Appendix Ⅱ 94 Appendix Ⅲ 95 Reference 97 | |
dc.language.iso | en | |
dc.title | 非均質可潤濕性表面於紅銅圓管表面對池沸騰熱傳性能影響之研究 | zh_TW |
dc.title | Experimental Investigation on Effect of Heterogeneous Wettable Surfaces on Pool Boiling Heat Transfer Performance of Cylindrical Copper Surface | en |
dc.type | Thesis | |
dc.date.schoolyear | 105-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 許進吉(Chin-Chi Hsu),李達生(Da-Sheng Lee) | |
dc.subject.keyword | 池沸騰,表面改質,非均質可潤濕性表面, | zh_TW |
dc.subject.keyword | pool boiling,surface modification,heterogeneous wettable surface, | en |
dc.relation.page | 103 | |
dc.identifier.doi | 10.6342/NTU201702081 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2017-07-27 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-1.pdf 目前未授權公開取用 | 7.34 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。