請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63618
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 盧信嘉(Hsin-Chia Lu) | |
dc.contributor.author | Kai-Wen Yang | en |
dc.contributor.author | 楊凱文 | zh_TW |
dc.date.accessioned | 2021-06-16T17:14:55Z | - |
dc.date.available | 2017-08-20 | |
dc.date.copyright | 2012-08-20 | |
dc.date.issued | 2012 | |
dc.date.submitted | 2012-08-17 | |
dc.identifier.citation | [1] 黃紹華, '由微波多層被動電路佈局圖中擷取電感、電容及生成電路圖,' 國立台灣大學電子工程研究所碩士論文, 國立台灣大學, 2010.
[2] Hsin-Chia Lu, Yen-Liang Kuo, Po-Sheng Huang, and Yi-Long Chang, 'Dual-band CRLH branch-line coupler in LTCC by lump elements with parasite control,' 2010 IEEE MTT-S International Microwave Symposium (IMS), pp. 393-396, Anahiem, USA, May. 2010. [3] 邢恆瑞, '微波多層被動電路之佈局對電路檢查的後段:使用權重之電路比對,' 國立台灣大學電子工程研究所碩士論文, 國立台灣大學, 2009. [4] Peter Hagn, Andreas Przadka, Volker Gebhardt, and Ulrich Bauernschmitt, 'Ceramics: the platform for duplexers and frontend-modules,' 2002 IEEE Ultrasonics Symposium, vol. 1, pp. 1-10, Oct. 2002. [5] Jyh-Wen Sheen, 'LTCC-MLC duplexer for DCS-1800,' IEEE Transactions on Microwave Theory and Techniques, vol. 47, no.9, pp. 1883-1890, Sep. 1999. [6] Chien-Hsun Chen, Chien-Hsiang Huang, Tzyy-Sheng Horng, Sung-Mao Wu, Chi-Tsung Chiu, Chih-Pin Hung, Jian-Yu Li, and Cheng-Chung Chen, 'Very compact transformer-coupled balun-integrated bandpass filter using integrated passive device technology on glass substrate,' 2010 IEEE MTT-S International Microwave Symposium (IMS), pp. 1372-1375 Anaheim, CA, May. 2010. [7] Hsin-Chia Lu, Kuan-Cheng Tseng, and Yung-Shuen Chang, 'Schematic extraction from layout of microwave multi-layer circuits,' 2008 Asia Pacific Microwave Conference APMC, pp. 1-4, Hong Kong/Macau, China, Dec. 2008. [8] 陳治廣, '微波多層被動電路之佈局對電路檢查前、後段整合,' 國立台灣大學電子工程研究所碩士論文, 國立台灣大學, 2012. [9] Hsin-Chia Lu, Tuck-Boon Chan, Charlie Chung-Ping Chen, Chia-Ming Liu, Heng-Jui Hsing, and Po-Sheng Huang, 'LTCC spiral inductor synthesis and optimization with measurement verification,' IEEE Trans. on Advanced Packaging, vol. 33, no.1, pp. 160-168, Feb. 2010. [10] Paul Franklin, 'Optimal rectangle covers for convex rectilinear polygons,' B.Sc., Simon Fraser University, 1984. [11] Po-Sheng Huang, Yi-Long Chang, and Hsin-Chia Lu, 'A compact broadband quadrature power splitter on LTCC,' 2011 Asia-Pacific Microwave Conference (APMC), pp. 33-36, Melbourne, Australia, Dec. 2011. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63618 | - |
dc.description.abstract | 本篇論文提供了從電路佈局圖裡擷取微帶線元件的方法,並記錄微帶線的相關參數以及與其他元件的連結關係。在對佈局圖分割出所有的必要矩形後,有些必要矩形可能是構成電容、電感的一部分。排除這些構成元件的矩形,剩下的矩形經過我們演算法的判斷與處理,可以擷取出適當長度的微帶線,並產生微帶線連結表來記錄微帶線兩端連接的元件類型與編號。參考這些資訊後,在電路圖中適當位置插入微帶線即可生成我們所需的電路圖,而電路設計者可以將此電路圖與原始的電路圖做比對,達成驗證與除錯的目的。 | zh_TW |
dc.description.abstract | This thesis presents a method that extracts microstrip lines from the layout of multi-layer microwave passive circuits. After extracting some essential rectangles making up components like capacitors or inductors in the circuit by the algorithm presented previously, we can get the other essential rectangles which could be a part of microstrip lines. When we extract all microstrip lines and construct a connection table to record the components connected to every microstrip line, this program then can determine where the microstrip line should be inserted into the schematic. Finally, a schematic corresponding to the layout will be generated, and then designers can compare this schematic with the original schematic for debugging. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T17:14:55Z (GMT). No. of bitstreams: 1 ntu-101-R99943143-1.pdf: 2150683 bytes, checksum: c1843c88bf7bd9703b85d3b23a0f1982 (MD5) Previous issue date: 2012 | en |
dc.description.tableofcontents | 第1章 簡介 1
1.1 動機 1 1.1.1 一個微波多層電路的例子 1 1.2 製程介紹 3 1.2.1 低溫共燒多層陶瓷(LTCC)技術介紹[3] 3 1.2.2 低溫共燒多層陶瓷技術的優缺點[3] 4 1.2.3 玻璃基板積體被動元件(GIPD)製程技術技術介紹 4 1.3 佈局圖對電路檢查的前後段作業 6 1.4 論文貢獻 8 1.5 章節介紹 8 第2章 先前研究 9 2.1 電路佈局圖的分割 9 2.1.1 直線多邊形與非直線多邊形 9 2.1.2 由直線多邊形分割出原生矩形 10 2.2 由區段樹找出必要矩形 12 2.2.1 區段樹的應用 14 2.2.2 必要矩形的分類 17 2.3 萃取電容、電感與互感 18 2.3.1 擷取電容 18 2.3.2 擷取電感 20 2.3.3 擷取互感 21 第3章 擷取微帶線並記錄與其他元件的連結關係 25 3.1 擷取微帶線 26 3.1.1 由必要矩形的集合裡萃取微帶線 26 3.1.2 大於特定長度的蜿蜒電感 30 3.1.3 檢查微帶線的總長 30 3.2 元件與微帶線的連結關係 34 3.2.1 利用連結點連接電容、電感與互感 34 3.2.2 在適當位置加入微帶線 38 第4章 結果與討論 41 4.1 正交功率分離器 41 第5章 結論 49 參考文獻 50 | |
dc.language.iso | zh-TW | |
dc.title | 由微波多層電路佈局圖中萃取包含微帶線與集總元件之電路圖 | zh_TW |
dc.title | Schematic extraction for lump elements and microstrip lines from layout of microwave passive circuits | en |
dc.type | Thesis | |
dc.date.schoolyear | 100-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 李建模(Chien-Mo Li),黃俊郎(Jiun-Lang Huang),林坤佑(Kun-You Lin) | |
dc.subject.keyword | 電路佈局圖,必要矩形,微帶線,連結表, | zh_TW |
dc.subject.keyword | microstrip line,layout,essential rectangle,connection table, | en |
dc.relation.page | 50 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2012-08-20 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電子工程學研究所 | zh_TW |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 2.1 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。