請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63388
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳奕君(I-Chun Cheng) | |
dc.contributor.author | Chin-Cheng Chiang | en |
dc.contributor.author | 蔣勤政 | zh_TW |
dc.date.accessioned | 2021-06-16T16:38:39Z | - |
dc.date.available | 2014-10-01 | |
dc.date.copyright | 2012-10-01 | |
dc.date.issued | 2012 | |
dc.date.submitted | 2012-09-26 | |
dc.identifier.citation | [1] M. Gratzel, 'From space to earth: The story of solar electricity,' Nature, vol. 403, pp. 363-364, 2000.
[2] 劉茂煌, '奈米光電電池,' 工業材料雜誌, vol. 230, pp. 91-97, 2003. [3] Becquerel, 'Recherches sur les effets de la radiation chimique de la lumiere solaire au moyen des courants electriques,' Comptes rendus de l'Academie des Sciences, vol. 9, pp. 145-148, 1839. [4] D.M.Chapin, C.S.Fuller, and G.L.Pearson, 'Silicon p-n junction power rectifiers and lightning protectors,' Proceedings of the IRE, vol. 42, p. 760, 1954. [5] A. Yella, H. W. Lee, H. N. Tsao, C. Y. Yi, A. K. Chandiran, M. K. Nazeeruddin, E. W. G. Diau, C. Y. Yeh, S. M. Zakeeruddin, and M. Gratzel, 'Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency,' Science, vol. 334, pp. 629-634, 2011. [6] 張天山 and 王維位, '染料敏化太陽電池全球相關專利剖析,' IPAMA智管會, vol. 73, pp. 1-15, 2010. [7] D. Cahen, G. Hodes, M. Gratzel, J. F. Guillemoles, and I. Riess, 'Nature of photovoltaic action in dye-sensitized solar cells,' Journal of Physical Chemistry B, vol. 104, pp. 2053-2059, 2000. [8] M. Gratzel, 'Photoelectrochemical cells,' Nature, vol. 414, pp. 338-344, 2001. [9] S. Nakade, T. Kanzaki, W. Kubo, T. Kitamura, Y. Wada, and S. Yanagida, 'Role of electrolytes on charge recombination in dye-sensitized TiO2 solar cell (1): the case of solar cells using the I-/I3- redox couple,' Journal of Physical Chemistry B, vol. 109, pp. 3480-3487, 2005. [10] A. Hagfeldt and M. Gratzel, 'Molecular photovoltaics,' Accounts of Chemical Research, vol. 33, pp. 269-277, 2000. [11] 銓盛光科公司07-5503310, 'http://tw.myblog.yahoo.com/ingot-aluminium/article?mid=1588&prev=1595&next=1586&page=1&sc=1.' [12] Y. K. Tsutomu Miyasaka, Takurou N. Murakami, and Norimichi Kawashima, 'Fabrication of dye-sensitized plastic film electrodes for flexible solar cells based on electrophoretic deposition techniques,' Proceedings of SPIE, vol. 5215, pp. 219-225, 2004. [13] U. Diebold, 'The surface science of titanium dioxide,' Surface Science Reports, vol. 48, pp. 53-229, 2003. [14] N. G. Park, J. van de Lagemaat, and A. J. Frank, 'Comparison of dye-sensitized rutile and anatase-based TiO2 solar cells,' Journal of Physical Chemistry B, vol. 104, pp. 8989-8994, 2000. [15] S. Ito, P. Liska, P. Comte, R. L. Charvet, P. Pechy, U. Bach, L. Schmidt-Mende, S. M. Zakeeruddin, A. Kay, M. K. Nazeeruddin, and M. Gratzel, 'Control of dark current in photoelectrochemical (TiO2/I--I3-) and dye-sensitized solar cells,' Chemical Communications, pp. 4351-4353, 2005. [16] L. M. Peter and K. G. U. Wijayantha, 'Electron transport and back reaction in dye sensitised nanocrystalline photovoltaic cells,' Electrochimica Acta, vol. 45, pp. 4543-4551, 2000. [17] M. K. Nazeeruddin, S. M. Zakeeruddin, R. Humphry-Baker, M. Jirousek, P. Liska, N. Vlachopoulos, V. Shklover, C. H. Fischer, and M. Gratzel, 'Acid-base equilibria of (2,2 '-bipyridyl-4,4 '-dicarboxylic acid)ruthenium(II) complexes and the effect of protonation on charge-transfer sensitization of nanocrystalline titania,' Inorganic Chemistry, vol. 38, pp. 6298-6305, 1999. [18] K. S. Finnie, J. R. Bartlett, and J. L. Woolfrey, 'Vibrational spectroscopic study of the coordination of (2,2 '-bipyridyl-4,4 '-dicarboxylic acid)ruthenium(II) complexes to the surface of nanocrystalline titania,' Langmuir, vol. 14, pp. 2744-2749, 1998. [19] R. Argazzi, 'Vibrational and electronic spectroscopy of electronically excited polychromophoric ruthenium(I1) complexes,' Inorganic Chemistry, vol. 33, pp. 5741-5749, 1994. [20] M. K. Nazeeruddin, M. Amirnasr, P. Comte, J. R. Mackay, A. J. McQuillan, R. Houriet, and M. Gratzel, 'Adsorption studies of counterions carried by the sensitizer cis-dithiocyanato(2,2 '-bipyridyl-4,4 '-dicarboxylate) ruthenium(II) on nanocrystaline TiO2 films,' Langmuir, vol. 16, pp. 8525-8528, 2000. [21] K. Murakoshi, 'Importance of binding states between photosensitizing molecules and TiO2 surface for efficiency in a dye-sensitiezed solar cell,' Journal of Electroanalytical Chemistry, vol. 396, pp. 27-34, 1995. [22] R.Brouillard, 'Chemical structure of anthocyanins,' Academic Press, pp. 1-40, 1982. [23] P. Markakis and L. Jurd, 'Anthocyanins and their stability in foods,' CRC Critical Reviews in Food Technology, vol. 4, pp. 437-453, 1974. [24] L.Jurd, 'Anthocyanins and relate compounds,' Journal of Organic Chemistry, vol. 28, pp. 987-991, 1963. [25] S. C. Hao, J. H. Wu, Y. F. Huang, and J. M. Lin, 'Natural dyes as photosensitizers for dye-sensitized solar cell,' Solar Energy, vol. 80, pp. 209-214, 2006. [26] K.Wongcharee, V.Meeyoo, and S.Chavadej, 'Dye-sensitized solar cell using natural dyes extracted from rosella and blue pea flowers,' Solar Energy Materials and Solar Cells, vol. 91, pp. 566-571, 2007. [27] J.J.Bertino and W. B. Robinson, 'The stability of wine anthocyanins on exposure to heat and light,' American Journal of Enology and Viticulture, vol. 19, pp. 147-154, 1968. [28] M. Durr, A. Yasuda, and G. Nelles, 'On the origin of increased open circuit voltage of dye-sensitized solar cells using 4-tert-butyl pyridine as additive to the electrolyte,' Applied Physics Letters, vol. 89, pp. 1-3, 2006. [29] M. Gratzel, 'Dye-sensitized solar cells,' Journal of Photochemistry and Photobiology C-Photochemistry Reviews, vol. 4, pp. 145-153, 2003. [30] J. G. Chen, V. Suryanarayanan, K. M. Lee, and K. C. Ho, 'On the use of triethylamine hydroiodide as a supporting electrolyte in dye-sensitized solar cells,' Solar Energy Materials and Solar Cells, vol. 91, pp. 1432-1437, 2007. [31] W. Kubo, T. Kitamura, K. Hanabusa, Y. Wada, and S. Yanagida, 'Quasi-solid-state dye-sensitized solar cells using room temperature molten salts and a low molecular weight gelator,' Chemical Communications, pp. 374-375, 2002. [32] K. M. Lee, P. Y. Chen, C. P. Lee, and K. C. Ho, 'Binary room-temperature ionic liquids based electrolytes solidified with SiO2 nanoparticles for dye-sensitized solar cells,' Journal of Power Sources, vol. 190, pp. 573-577, 2009. [33] P. Z. Wang, S. M. Comte, P. Exnar, M.Gratzel, 'Gelation of ionic liquid-based electrolytes with silica nanoparticles for quasi-solid-state dye-sensitized solar cells,' Journal of American Chemical Society, vol. 125, pp. 1166-1167, 2003. [34] J. Wu, S. Hao, Z. Lan, J. Lin, M. Huang, Y. Huang, P. Li, S.Yin, T. Sato, 'An all-solid-state dye-sensitized solar cell-based poly(N-alkyl-4-vinyl-pyridine iodide) electrolyte with efficiency of 5.64%,' Journal of American Chemical Society, vol. 130, pp. 11568-11569, 2008. [35] M. G. Kang, N. G. Park, K. S. Ryu, S. H. Chang, and K. J. Kim, 'Flexible metallic substrates for TiO2 film of dye-sensitized solar cells,' Chemistry Letters, vol. 34, pp. 804-805, 2005. [36] M. G. Kang, N. G. Park, K. S. Ryu, S. H. Chang, and K. J. Kim, 'A 4.2% efficient flexible dye-sensitized TiO2 solar cells using stainless steel substrate,' Solar Energy Materials and Solar Cells, vol. 90, pp. 574-581, 2006. [37] J. H. Park, Y. Jun, H. G. Yun, S. Y. Lee, and M. G. Kang, 'Fabrication of an efficient dye-sensitized solar cell with stainless steel substrate,' Journal of the Electrochemical Society, vol. 155, pp. F145-F149, 2008. [38] H. G. Yun, Y. Jun, J. Kim, B. S. Bae, and M. G. Kang, 'Effect of increased surface area of stainless steel substrates on the efficiency of dye-sensitized solar cells,' Applied Physics Letters, vol. 93, pp. 133311-1-3, 2008. [39] K. Miettunen, J. Halme, M. Toivola, and P. Lund, 'Initial performance of dye solar cells on stainless steel substrates,' Journal of Physical Chemistry C, vol. 112, pp. 4011-4017, 2008. [40] K. Miettunen, X. L. Ruan, T. Saukkonen, J. Halme, M. Toivola, G. S. Huang, and P. Lund, 'Stability of dye solar cells with photoelectrode on metal substrates,' Journal of the Electrochemical Society, vol. 157, pp. B814-B819, 2010. [41] X. Huang, P. Shen, B. Zhao, X. Feng, S. Jiang, H. Chen, H. Li, and S. Tan, 'Stainless steel mesh-based flexible quasi-solid dye-sensitized solar cells,' Solar Energy Materials and Solar Cells, vol. 94, pp. 1005-1010, 2010. [42] S. Ito, N. L. C. Ha, G. Rothenberger, P. Liska, P. Comte, S. M. Zakeeruddin, P. Pechy, M. K. Nazeeruddin, and M. Gratzel, 'High-efficiency (7.2%) flexible dye-sensitized solar cells with Ti-metal substrate for nanocrystalline-TiO2 photoanode,' Chemical Communications, pp. 4004-4006, 2006. [43] Y. Jun and M. G. Kang, 'The characterization of nanocrystalline dye-sensitized solar cells with flexible metal substrates by electrochemical impedance spectroscopy,' Journal of the Electrochemical Society, vol. 154, pp. B68-B71, 2007. [44] K. Nakayama, T. Kubo, and Y. Nishikitani, 'TiO2 nanotube layers on Ti substrates for high efficiency flexible dye-sensitized solar cells,' Applied Physics Express, vol. 1, pp. 112301-1-3, 2008. [45] W. W. Tan, X. Yin, X. M. Zhou, J. B. Zhang, X. R. Xiao, and Y. Lin, 'Electrophoretic deposition of nanocrystalline TiO2 films on Ti substrates for use in flexible dye-sensitized solar cells,' Electrochimica Acta, vol. 54, pp. 4467-4472, 2009. [46] L. Y. Lin, C. P. Lee, R. Vittal, and K. C. Ho, 'Selective conditions for the fabrication of a flexible dye-sensitized solar cell with Ti/TiO2 photoanode,' Journal of Power Sources, vol. 195, pp. 4344-4349, 2010. [47] T. Yamaguchi, N. Tobe, D. Matsumoto, T. Nagai, and H. Arakawa, 'Highly efficient plastic-substrate dye-sensitized solar cells with validated conversion efficiency of 7.6%,' Solar Energy Materials and Solar Cells, vol. 94, pp. 812-816, 2010. [48] B. X. Lei, J. Y. Liao, R. Zhang, J. Wang, C. Y. Su, and D. B. Kuang, 'Ordered crystalline TiO2 nanotube arrays on transparent FTO glass for efficient dye-sensitized solar cells,' Journal of Physical Chemistry C, vol. 114, pp. 15228-15233, 2010. [49] H. G. Yun, J. H. Park, B. S. Bae, and M. G. Kang, 'Dye-sensitized solar cells with TiO2 nano-particles on TiO2 nano-tube-grown Ti substrates,' Journal of Materials Chemistry, vol. 21, pp. 3558-3561, 2011. [50] H. G. Yun, B. S. Bae, and M. G. Kang, 'A simple and highly efficient method for surface treatment of Ti substrates for use in dye-sensitized solar cells,' Advanced Energy Materials, vol. 1, pp. 337-342, 2011. [51] 'http://en.wikipedia.org/wiki/Polyethylene_terephthalate.' [52] D. Gutierrez-Tauste, I. Zumeta, E. Vigil, M. A. Hernandez-Fenollosa, X. Domenech, and J. A. Ayllon, 'New low-temperature preparation method of the TiO2 porous photoelectrode for dye-sensitized solar cells using UV irradiation,' Journal of Photochemistry and Photobiology a-Chemistry, vol. 175, pp. 165-171, 2005. [53] H. Lindstrom, A. Holmberg, E. Magnusson, L. Malmqvist, and A. Hagfeldt, 'A new method to make dye-sensitized nanocrystalline solar cells at room temperature,' Journal of Photochemistry and Photobiology a-Chemistry, vol. 145, pp. 107-112, 2001. [54] H. Kim, R. C. Y. Auyeung, M. Ollinger, G. P. Kushto, Z. H. Kafafi, and A. Pique, 'Laser-sintered mesoporous TiO2 electrodes for dye-sensitized solar cells,' Applied Physics a-Materials Science & Processing, vol. 83, pp. 73-76, 2006. [55] M. Durr, A. Schmid, M. Obermaier, S. Rosselli, A. Yasuda, and G. Nelles, 'Low-temperature fabrication of dye-sensitized solar cells by transfer of composite porous layers,' Nature Materials, vol. 4, pp. 607-611, 2005. [56] H. W. Chen, C. Y. Hsu, J. G. Chen, K. M. Lee, C. C. Wang, K. C. Huang, and K. C. Ho, 'Plastic dye-sensitized photo-supercapacitor using electrophoretic deposition and compression methods,' Journal of Power Sources, vol. 195, pp. 6225-6231, 2010. [57] S. Hore, P. Nitz, C. Vetter, C. Prahl, M. Niggemann, and R. Kern, 'Scattering spherical voids in nanocrystalline TiO2 - enhancement of efficiency in dye-sensitized solar cells,' Chemical Communications, pp. 2011-2013, 2005. [58] L. Qi, J. D. Sorge, and D. P. Birnie, 'Dye-sensitized solar cells based on TiO2 coatings with dual size-scale porosity,' Journal of the American Ceramic Society, vol. 92, pp. 1921-1925, 2009. [59] D. W. Liu, I. C. Cheng, J. Z. Chen, H. W. Chen, K. C. Ho, and C. C. Chiang, 'Enhanced optical absorption of dye-sensitized solar cells with microcavity-embedded TiO2 photoanodes,' Optics Express, vol. 20, pp. A168-A176, 2012. [60] 汪建民, '材料分析,' 中國材料科學學會, 2008. [61] R. A. Spurr. and H. Myers, 'Quantitative analysis of anatase-rutile mixtures with an X-Ray diffractometer,' Analytical Chemistry, vol. 29, pp. 760-762, 1957. [62] acade.must.edu.tw/upfiles/ADUpload/c23_downmul1299312148.pdf. [63] http://www.wacom-ele.co.jp/en/products/solar/super/. [64] R. Kern, R. Sastrawan, J. Ferber, R. Stangl, and J. Luther, 'Modeling and interpretation of electrical impedance spectra of dye solar cells operated under open-circuit conditions,' Electrochimica Acta, vol. 47, pp. 4213-4225, 2002. [65] A. Zaban, M. Greenshtein, and J. Bisquert, 'Determination of the electron lifetime in nanocrystalline dye solar cells by open-circuit voltage decay measurements,' Chemphyschem, vol. 4, pp. 859-864, 2003. [66] J. Bisquert, A. Zaban, M. Greenshtein, and I. Mora-Sero, 'Determination of rate constants for charge transfer and the distribution of semiconductor and electrolyte electronic energy levels in dye-sensitized solar cells by open-circuit photovoltage decay method,' Journal of the American Chemical Society, vol. 126, pp. 13550-13559, 2004. [67] http://rsb.info.nih.gov/ij/index.html. [68] E. E. Underwood, 'Applications of quantitative metallography,' in Metals Handbook, vol. 8, pp. 37-47, 1973. [69] M. Durr, A. Yasuda, and G. Nelles, 'On the origin of increased open circuit voltage of dye-sensitized solar cells using 4-tert-butyl pyridine as additive to the electrolyte,' Applied Physics Letters, vol. 89, pp. 061110-1-3, 2006. [70] K. M. Lee, V. Suryanarayanan, and K. C. Ho, 'The influence of surface morphology of TiO2 coating on the performance of dye-sensitized solar cells,' Solar Energy Materials and Solar Cells, vol. 90, pp. 2398-2404, 2006. [71] P. M. Sommeling, B. C. O'Regan, R. R. Haswell, H. J. P. Smit, N. J. Bakker, J. J. T. Smits, J. M. Kroon, and J. A. M. van Roosmalen, 'Influence of a TiCl4 post-treatment on nanocrystalline TiO2 films in dye-sensitized solar cells,' Journal of Physical Chemistry B, vol. 110, pp. 19191-19197, 2006. [72] A. Kay, 'Solar cells based on dye-sensitized nanocrystalline TiO2 electrodes (No. 1214),' PhD thesis, E ’ cole Polytechnique Fe’de’rale de Lausanne, 1994. [73] S. Ito, T. N. Murakami, P. Comte, P. Liska, C. Gratzel, M. K. Nazeeruddin, and M. Gratzel, 'Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%,' Thin Solid Films, vol. 516, pp. 4613-4619, 2008. [74] S. Wang, Y. L. Li, C. M. Du, Z. Q. Shi, S. X. Xiao, D. B. Zhu, E. Q. Gao, and S. M. Cai, 'Dye sensitization of nanocrystalline TiO2 by perylene derivatives,' Synthetic Metals, vol. 128, pp. 299-304, 2002. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63388 | - |
dc.description.abstract | 本研究利用可撓曲基板製作染料敏化太陽能電池,其光電極中佈滿微米孔洞。 基板包括不銹鋼板、平坦化的二氧化矽阻絕層,以及用來導電的ITO,其上有一層二氧化鈦緻密層,最後具有微米孔洞的二氧化鈦光電極。而以不摻入孔洞的FTO作為光電極,其元件背面照光的效率為3.85%。我們利用摻入聚苯乙烯微米小球的二氧化鈦薄膜經過燒結所產生的微米孔洞所製作出之二氧化鈦光電極,藉以改善染料敏化太陽能電池的效能,本研究所包含的二氧化鈦光電極有兩種結構。
第一種結構採用均為相同聚苯乙烯微米小球濃度,將其摻入二氧化鈦膠體溶液,網印共三層所製作出之12 μm勻相薄膜結構光電極,在此結構下,微米的大孔洞增加了光的散射與光路徑,使染料對光的吸收機增加。此外,電化學阻抗分析與開路電壓衰減量測中顯示微米孔洞分佈在二氧化鈦薄膜中,對於電子的傳導性質與載子復合有很大的影響。使用摻雜濃度1.5 wt.% 聚苯乙烯小球所製作出的元件,其光電轉換效率為2.84 %。 第二種結構為含有三種不同濃度的聚苯乙烯小球之二氧化鈦膠體溶液製作出的非勻相薄膜結構光電極,每一層不同濃度的膜厚均為4 μm。第一層膜不摻小球、第二層膜為1.5 wt.%,而第三層膜為5 wt.%之聚苯乙烯小球所製備的二氧化鈦薄膜,其效率可達到3.41%。此種非勻相結構之染料敏化太陽能電池的效能提升除了散射效應之外,更進一步利用聚苯乙烯小球之濃度由小到大產生的光侷限效應,還有二氧化鈦薄膜可以吸收更多染料分子。 接著,我們將此最好結構的光電極用0.05M的四氯化鈦溶液浸泡,處理溫度為70oC,時間20分鐘,所組裝而成的元件其效率為3.88%。 | zh_TW |
dc.description.abstract | This thesis reported the enhanced performance of flexible dye-sensitized solar cells (DSSCs) with microcavity-embedded nanoporous TiO2 photoanodes. The substrate consisted of a stainless steel foil, a SiO2 planarization and isolation layer, and an ITO contact layer. Then a TiO2 compact layer was deposited on, followed by the formation of microcavitiy-embedded nanoporous TiO2 photoanode. By using FTO glass-based photoanode without mircocavities as a reference, we obtained a cell efficiency of 3.85% under backside illumination from counter electrode. The microcavities were formed by calcining TiO2 pastes with the addition of polystyrene (PS) microspheres. The TiO2 photoanodes of this study consisted two types of structure: monolayer and trilayer.
The monolayer structure was composed of three sublayers with PS microspheres of identical concentration, the composite pastes were screen printed layer-by-layer to achieve a total thickness of 12 μm (three 4-μm-thick sublayers). The present of microcavities in the TiO2 photoanode increased the light scattering and optical path, so there was more opportunity for the dye to absorb the light. Moreover, the EIS and OCVD results showed that microcavities in TiO2 had a significant impact on the electron transport propeties and the recombination time of the carriers. For DSSCs made with TiO2 paste mixed with 1.5 wt.% PS microspheres, the conversion efficiency was 2.84%, which improved by 27% from the cell made without microsphere. The trilayer structure contained three sublayers with PS microspheres of different concentrations. The I-V characteristics of the best cell was the photoanode with PS microsphere concentrations of no PS ball, 1.5 wt.% and 5 wt.% in the first, second, and third sublayers, respectively. A conversion efficiency of 3.41% was obtained. The enhancement of cell performance was due to the multiple scattering of light by the microcavities, the light confinement by the stack of TiO2 sublayers with low-to-high concentration of microcavities, and the increase of the amount of dye absorbed. Finally, the photoanode of our best structure was immersed in a 0.05M TiCl4 solution at 70oC for 20 min. The DSSC with TiCl4 treatment exhibited a coversion efficiency of 3.88%. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T16:38:39Z (GMT). No. of bitstreams: 1 ntu-101-R99941100-1.pdf: 5001676 bytes, checksum: b5d316eb48adc200364196df838bf466 (MD5) Previous issue date: 2012 | en |
dc.description.tableofcontents | 第一章 緒論 1
1.1 前言 1 1.2 太陽能電池發展簡介 2 1.3 論文架構 5 第二章 原理介紹與文獻回顧 6 2.1 染料敏化太陽能電池基本原理 6 2.2 染料敏化太陽能電池結構 9 2.3 DSSC的輸出特性與討論 24 2.4 可撓性DSSC文獻回顧 26 2.5 於光電極中摻入孔洞之文獻回顧 37 第三章 樣品製備與量測分析儀器 39 3.1 實驗藥品與器材 39 3.2 樣品製備與電池組裝 40 3.2.1 基板清洗 40 3.2.2 SiO2介電層的製備 41 3.2.3 ITO透明導電薄膜的製備 41 3.2.4 TiO2緻密層之製備 41 3.2.5 奈米多孔隙TiO2 凝膠製備 42 3.2.6 染料製備 42 3.2.7 對電極的製備 43 3.2.8 電解液製備 44 3.2.9 電池組裝 45 3.3 量測分析儀器 46 3.3.1 X-ray 粉末繞射儀[60] 46 3.3.2 掃描式電子顯微鏡 47 3.3.3 紫外光-可見光光譜儀 47 3.3.4 電子微探儀 48 3.3.5 太陽光模擬光源 48 3.3.6 電化學阻抗分析儀 49 3.3.7 開路電壓衰減量測法 53 3.3.8 染料吸附量測試 55 第四章 結果與討論 56 4.1 以不銹鋼基板製作可撓式DSSC 56 4.1.1 以不銹鋼基板當做導電基板 56 4.1.2 Stainless Steel/SiOx/ITO 57 4.2 具有微米孔洞之TiO2光電極 59 4.2.1 以勻相TiO2光電極製作之DSSC 59 4.2.2 以非勻相TiO2光電極製作之DSSC 73 4.2.3 元件光侷限效應 91 4.2.4 將最佳結構元件進行四氯化鈦處理 93 第五章 結論與未來展望 96 附錄 97 A. 元件再現性 97 B. 染料浸泡時間對光電極的影響 103 | |
dc.language.iso | zh-TW | |
dc.title | 利用可撓性不銹鋼基板製作染料敏化太陽能電池 | zh_TW |
dc.title | Fabrication of Dye-Sensitized Solar Cells on Flexible Stainless Steel Substrate | en |
dc.type | Thesis | |
dc.date.schoolyear | 101-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳志毅(Chih-I Wu),陳建彰(Jian-Zhang Chen),徐振哲(Cheng-Che Hsu) | |
dc.subject.keyword | 染料敏化太陽能電池,電子傳輸,電化學阻抗分析,可撓性, | zh_TW |
dc.subject.keyword | DSSC,electron transport,electrochemical impedance analyzer,flexible, | en |
dc.relation.page | 110 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2012-09-26 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 4.88 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。