請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/61638
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 廖文正 | |
dc.contributor.author | Nguyen Duc Tuan | en |
dc.contributor.author | 阮德俊 | zh_TW |
dc.date.accessioned | 2021-06-16T13:08:06Z | - |
dc.date.available | 2013-08-06 | |
dc.date.copyright | 2013-08-06 | |
dc.date.issued | 2013 | |
dc.date.submitted | 2013-08-01 | |
dc.identifier.citation | [1] Fanella, D. A., and Naaman, A. E. (1985). ‘‘Stress-strain properties of fiber-reinforced mortar in compression.’’ ACI J., 82(4), 475 – 483.
[2] Hsu, L. S. M.,and Hsu, C. T. T. (1994). ‘‘Stress-strain behavior of steel fiber high-strength concrete under compression.’’ ACI Mat. J., 91(4), 448 – 457. [3] P. Paultre, R.Eid, Y. Langlois, and Y. Lévesque (2010). “Behavior of Steel Fiber-Reinforced High-Strength Concrete Columns under Uniaxial Compression.” Journal of Structural Engineering, Vol. 136, No. 10, October 1, 2010. [4] M. A. Mansur, M. S. Chin, and T. H. Wee (1999). “Stress-Strain Relationship of High-Strength Fiber Reinforced Concrete in Compression.” Journal of Materials in Civil Engineering, Vol. 11, No. 1, February, 1999. [5] McKenna F, Fenves GL, Scott MH. Open System for Earthquake Engineering Simulation, University of California, Berkeley, CA, 2000. Available from: http://opensees.berkeley.edu [27 May 2008]. [6] ACI Committee 544. 1974. 'Fiber Reinforced Concrete.' ACI SP-44 [7] Shah, S. P., and G. Batson. Editors. 1987. 'Fiber Reinforced Concrete Properties and Applications.' ACI SP-105. [8] Shah, S. P., and A. E. Naaman. 1976. 'Mechanical Properties of Glass and Steel Fiber Reinforced Mortar.' ACI Journal. 1:50-55. [9] Chang, K. K., and Lee, H. H. (2004) “Behavior of Steel Fiber Reinforced Concrete Columns under Cyclic Loading.” Journal of the Korea Concrete Institute, Vol 16, No. 3, pp 415-423. [10] Hsu, L. S., and Hsu, C. T. T.(1994). “Stress-strain behavior of steel-fiber high-strength concrete under compression.” ACI Struct. J.,91(4),448–457. [11] Nataraja M.C., Dhang N. and Gupta A.P, (1998), “Steel fiber reinfo rced concrete under compression”, The Indian Concrete Journal, 26(3), pp 353 -356. [12] Ezeldin, A. S., Balaguru, P. N. (1993), “Normal and high-strength fiber-reinforced concrete under compression” J. Materials in Civil Engrg, ASCE, 4(4), 415-428. [13] Mansur, M. A., Chin, M. S., and Wee, T. H.(1999). “Stress-strain relationship of high-strength fiber concrete in compression.” J. Mater. Civ.Eng.,11(1), 21–29. [14] Carreira, D.J., and Chu, K.M.(1985) .'Stress-strain relationship for plain concrete in compression.'ACI J.,82(6),797-804. [15] Mansur, M. A., Chin, M. S., and Wee, T. H.(1999). “Stress-strain relationship of high-strength fiber concrete in compression.” J. Mater. Civ.Eng.,11(1), 21–29. [16] Wee et al., Chin, M. S., and Mansur, M. A.(1996). 'Stress-strain relationship of high-strength concrete in compression.' J. Mat.in Civ.Engrg.,ASCE,9(2). [17] Sharma, U.K., Pradeep, B., and Kaushik, S.K. (2005) “Behavior of Confined High Strength Concrete Columns under Axial Compression.” Journal of Advanced Concrete Technology, Vol. 3, No. 2, 267-281. [18] Yong, Y. K., Nour, M. G. and Nawy, E. G. (1998). “Behavior of laterally confined high strenth concrete under axial loads.” ASEC Journal of Structural Engineering, 114 (2), 332-351. [19] Bjerkli, L., Tomaszewicz A. and Jansen J. J. (1990). “Deformation properties and ductility of high strength concrete” Proceeding of Second International Symposium on Utilization of High Strength Concrete, Berkley, California, 215-238. [20] Nagashima, T., Sugano, S., Kimura, H. and Ichikawa, A. (1992). “Monotonic axial compression test on utlra-high strength concrete tied columns.” Proceedings of 10th World Conference on Earthquake Engineering. Balkema, Rotterdam, the Netherlands, 2983-2988. [21] Muguruma, H., Nishiyama, M. and Watanabe, F. (1993). “Stress strain curve for concrete with a wide range of compressive strength.” Proceedings of Symposium on High Strength Concrete, California, 314-321. [22] Li, B., Park, R., and Tanaka, H. (1994), “Strength & ductility of reinforced concrete members and frames constructed using high strength concrete.” Research report No. 94-5, University of Canterbury, Christchurch, New Zealand. [23] Cusson, D. and Paultre, P. (1995). “Stress – strain model for confined high strength concrete.” ASCE Journal of Structurall Engineering, 121 (3), 468-477. [24] Razvi, S. R. and Saatcioglu, M. (1999). “Confinement model for high strength concrete.” ASEC Journal of Structural Engineering, 125 (3), 281-289. [25] Legeron, F. and Paultre, P. (2003). “Uniaxial confinement model for normal and high strength concrete columns.” ASCE Journal of Structural Engineering, 29(2), 241-252. [26] Paultre, P., Eid, R., Langlois, Y., and Levesque, Y. (2010). “Behavior of Steel Fiber – Reinforced High Strength Concrete Columns under Uniaxial Compression” Journal of Structural Engineering, Vol.136, No. 10. [27] Wan, S., Loh, C. H., and Peng, S. Y., (2001) “Experimental and theorical study on softening and pinching effects of bridge column.” Soil Dynamics and Earthquake Engineering, Vol. 12, 75-81. [28] LeBorgne, M. R. “Modeling the post shear failure behavior of reinforced concrete columns” PHD Dissertation, The University of Texas at Austin, May 2012. [29] McKenna, F., Fenves, G. L., and Scott, M. H. (2000). “Open System for Earthquake Engineering Simulation (OpenSees)” Univ. of California, Berkeley, CA, http://opensees.berkeley.edu. [30] McKenna, F., Fenves, G. L., Scott, M. H., and Jeremić,B.(2000).“Open system for earthquake engineering simulation.” http://opensees.berkeley.edu. [31] Scott, B.D., Park, R. and Priestley, M.J.N. (1982), “Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates”, ACI Journal, 79(2), pp. 13-27. [32] Popovics S. “A numerical approach to the complete stress – strain curve of concrete.” Cement and Concrete Research (1973), 3(4), 583-599. [33] Karsan, I. D. & Jirsa, J. O.,“Behavior of concrete under compressive loading”, Journal of Structural Division ,ASCE, Vol. 95(ST12), 1969, pp.2543-2563. [34] Mander, J.B., Priestley, M.J.N. and Park, R., (1988a), 'Theoretical Stress Strain Model of Confined Concrete,' Journal of Structural Engineering, ASCE, Vol. 114, No. 8, pp. 1804-1826. [35] Cusson, D., and Paultre, P. (1994). ‘‘High-strength concrete columns confined by rectangular ties.’’J. Struct. Eng., 120(3), 783– 804. [36] Bentur, A., and Mindess, S., “Fiber Reinforced Cementitious Composites,” Elsevier Applied Science, London, UK, 1990. [37] Aveston, J., Mercer, R. A., and Sillwood, J. M. (1974). “Fiber reinforced cements - Scientific foundation for specification.” Composites, Standards Testing and Design, Proc., National Physical Laboratory Conf., IPC Science and Technology, London, 93–103. [38] Maage, M. (1977). “Interaction between steel fibers and cement based matrixes.” Mater. Struct.,10(59), 297–301. [39] Foster, S. J. (2001). “On behavior of high-strength concrete columns: Cover spalling, steel fibers, and ductility.”ACI Struct. J.,98(4), 583-589. [40] Sheikh, S. A., Shah, D. V., and Khoury, S. S. (1994). ‘‘Confinement of high-strength concrete columns.’’ACI J.,91(1), 100–111. [41] Menegotto, M. and Pinto, P.E.: (1973). “Method of analysis of cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under normal force and bending.” Preliminary Report, IABSE, Vol. 13, pp. 15–22. [42] Filippou, F. C., Popov, E. P., Bertero, V. V. (1983). 'Effects of Bond Deterioration on Hysteretic Behavior of Reinforced Concrete Joints'. Report EERC 83-19, Earthquake Engineering Research Center, University of California, Berkeley. [43] Taucer, Fabio F, E Spacone, FC Filippou. “A Fiber Beam-Column Element for Seismic Response Analysis of Reinforced Concrete Structures,' Report No. UCB/EERC-91/17, Earthquake Engineering RCPlainStress Quadrilateral Element Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 347 Research Center, College of Engineering, University of California, Berkeley. December 1991. [44] Liu, En Rui, “Study of the Compression Behavior of High Strength Steel Fiber Reinforced Concrete Columns”, Master Thesis, National Taiwan University, 2013 [45] Elwood, K. J., (2004), “Modelling failures in existing reinforced concrete columns”, Can,J,Civ.Eng., Vol. 31, 846-859. [46] Elwood, K.J., and Moehle, J.P. 2003. “Shake table tests and analytical studies on the gravity load collapse of reinforced concrete frames.” Pacific Earthquake Engineering Research Center, University of California, Berkeley, Calif. PEER Report 2003/01. [47] Elwood, K.J., and Moehle, J.P. (2005). “Drift capacity of reinforced concrete columns with light transverse reinforcement.” Earthquake Spectra,21. In press. [48] Nakamura, T., and Yoshimura, M. (2002). “Gravity load collapse of reinforced concrete columns with brittle failure modes.” Journal of Asian Architecture and Building Engineering,1(1): 21–27. [49] Priestley, M.J.N., Verma, R., and Xiao, Y. (1994). “Seismic shear strength of reinforced concrete columns.” Journal of Structural Engineering,120(8): 2310–2329. [50] Crisfield, M.A., and Wills, J. (1988). “Solution strategies and softening materials.” Computer Methods in Applied Mechanics and Engineering,66: 267–289. [51] Ewood, K.J., and Eberhard, M.O. (2009). “Effective Stiffness of Reinforced Concrete Columns.” ACI Structural Journal, V.106, No.4. [52] Silvia Mazzoni, Frank McKenna, Michael H. Scott, Gregory L. Fenves, “OpenSees Command Language Manual.”, 2007. [53] M. Gebman, “Application of Steel Fiber Reinforced Concrete In Seismic Beam-Column Joint” Master Thesis, San Diego State University, 2001. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/61638 | - |
dc.description.abstract | Finite element model of high strength steel fiber reinforced concrete columns were carried out in this study to the behavior of it under pure compressive loading tests and subjected to cyclic loading test with high constant compressive load. The work reported in this thesis deals with the analytical models, proposed to predict the behavior of high strength concrete with and without steel fibers. The simulated models were performed by using OpenSees platform, an open source software. The experimental results was adopted from the thesis carried out by Liu, En Rui [44] to verify the numerical models. The finite element analysis results agree quite well with the experimental data. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T13:08:06Z (GMT). No. of bitstreams: 1 ntu-102-R00521260-1.pdf: 3648648 bytes, checksum: 9e28eede2c70f29f5e83c83ce257a39c (MD5) Previous issue date: 2013 | en |
dc.description.tableofcontents | ACKNOWLEDGEMENTS ii
ABSTRACT iii TABLE OF CONTENTS iv LIST OF TABLES vii LIST OF FIGURES viii NOTATION AND SYMBOLS xi CHAPTER 1 INTRODUCTION 1 1.1. Background and Motivations 1 1.2. Research Objectives 2 1.3. Thesis Organization 3 CHAPTER 2 LITERATURE REVIEW 5 2.1. High – Strength Steel Fiber Reinforced Concrete 5 2.1.1 Introduction 5 2.1.2 Mechanical Properties of Steel Fiber Reinforced Concrete 6 2.1.3 Stress – Strain Curves of High – Strength Steel Fiber Reinforced Concrete 7 2.2. Compressive Behavior of High – Strength Steel Fiber Reinforced Concrete Column …………… 17 2.3. Behavior of High Strength Steel Fiber Reinforced Concrete Columns Subjected to Cyclic Loading Test 17 2.4. OpenSees Program 19 CHAPTER 3 COMPRESSIVE BEHAVIOR OF HIGH – STRENGTH STEEL FIBER REINFORCED CONCRETE COLUMNS 21 3.1. Introduction 21 3.2. Experiment Program 21 3.2.1 Test Specimens 21 3.2.2 Test Procedures 22 3.3. Finite Element Modeling 22 3.3.1 Material Model 22 3.3.2 Structural Model 30 3.3.3 Analysis 31 CHAPTER 4 BEHAVIOR OF HIGH – STRENGTH STEEL FIBER REINFORCED CONCRETE COLUMN UNDER CYCLIC LOADING WITH HIGH COMPRESSION 32 4.1. Introduction 32 4.2. Experiment Program 33 4.2.1 Test Specimens 33 4.2.2 Test Procedures 33 4.3. Finite Element Modeling 34 4.3.1 Material Model 34 4.3.2 Structural Model 34 4.3.3 Analysis 42 CHAPTER 5 RESULTS AND CONCLUSIONS 43 5.1. General 43 5.2. Uniaxial Compressive Tests of Steel Fiber Reinforced Concrete Cylinders 43 5.3. HSSFRC Columns Subjected to Compressive Load 44 5.4. HSSFRC Columns Subjected to Cyclic Load with Compression 45 CHAPTER 6 CONCLUSIONS AND RECOMMENDATIONS 47 6.1. Conclusions 47 6.2. Recommendations 48 Reference 50 APPENDIX 1 92 | |
dc.language.iso | en | |
dc.title | 高強度鋼纖維鋼筋混凝土柱的軸壓及反覆側推行為模擬研究 | zh_TW |
dc.title | Numerical Investigations of High Strength Steel Fiber Reinforced Concrete Columns under Axial and Cyclic Loading | en |
dc.type | Thesis | |
dc.date.schoolyear | 101-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 劉楨業,詹穎雯 | |
dc.subject.keyword | 高強度混凝土,循環荷載, | zh_TW |
dc.subject.keyword | high strength concrete,steel fiber reinforced concrete,axial behavior,cyclic loading,simulation., | en |
dc.relation.page | 102 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2013-08-01 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 3.56 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。