請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/61541
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳國慶(Kuo-Ching Chen) | |
dc.contributor.author | Kuan-Cheng Chiu | en |
dc.contributor.author | 邱冠澄 | zh_TW |
dc.date.accessioned | 2021-06-16T13:05:22Z | - |
dc.date.available | 2018-07-30 | |
dc.date.copyright | 2013-08-08 | |
dc.date.issued | 2013 | |
dc.date.submitted | 2013-08-03 | |
dc.identifier.citation | [1] J. Newman and W. Tiedemann, Porous-Electrode Theory with Battery Applications, AIChE Journal, 21, 25 (1975)
[2] J. Newman and K. E. Thomas-Alyea, Electrochemical Systems, Third ed., Wiley-Interscience, Berkeley (2004) [3] T. F. Fuller, M. Doyle, and J. Newman, Simulation and Optimization of the Dual Lithium Ion Insertion Cell, J. Electrochem. Soc., 141, 1 (1994) [4] M. Doyle, J. Newman, A.S. Gozdz, C.N. Schmutz, and J.M. Tarascon, Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells, J. Electrochem. Soc., 143, 1890 (1996) [5] P. Arora, M. Doyle, A.S. Gozdz, R. E. White, and J. Newman, Comparison Between Computer Simulations and Experimental Data for High-Rate Discharges of Plastic Lithium-Ion Batteries, J. Power Sources, 88, 219 (2000) [6] D. Bernardi, E. Pawlikowski, and J. Newman, A General Energy Balance for Battery Systems, J. Electrochem. Soc., 132, 5 (1985) [7] V. Srinivasan and C.Y. Wang, Analysis of Electrochemical and Thermal Behavior of Li-Ion Cells, J. Electrochem. Soc., 150, A98 (2003) [8] G. G. Botte, B.A. Johnson, and R.E. White, Influence of Some Design Variables on the Thermal Behavior of a Lithium-Ion Cell, J. Electrochem. Soc., 146, 914 (1999) [9] J.T. Dudley, D.P. Wilkinson, G. Thomas, R. LeVae, S. Woo, H. Blom, C. Horvath, M.W. Juzkow, B. Denis, P. Juric, P. Aghakian, and J.R. Dahn, Conductivity of Electrolytes for Rechargeable Lithium Batteries, J. Power Sources, 35, 59 (1991) [10] Y. Ye, Y. Shi, and A.A.O. Tay, Electro-Thermal Cycle Life Model for Lithium Iron Phosphate Battery, J. Power Sources, 217, 509 (2012) [11] D. Aurbach, A Review on New Solutions, New Measurements Procedures and New Materials for Rechargeable Li Batteries, J. Power Sources, 146, 71 (2005) [12] G. Ehrlich, Lithium-ion Batteries in The Handbook Batteries, 3rd Ed., McGraw Hill (2003) [13] S.S. Zhang, K. Xu, and T.R. Jow, The Low Temperature Performance of Li-Ion Batteries, J. Power Sources, 115, 137 (2003) [14] G. Nagasubramanian, Electrical Characteristics of 18650 Li-Ion Cells at Low Temperatures, Journal of Applied Electrochemistry, 31, 99 (2001) [15] H. Yang, S. Amiruddin, H. J. Bang, Y. K. Sun, and J. Prakash, A Review of Li-Ion Cell Chemistries and their Potential use in Hybrid Electric Vehicles, J. Ind. Eng. Chem., 12, 12 (2006) [16] S. Al Hallaj, H. Maleki, J.S. Hong, and J.R. Selman, Thermal Modeling and Design Considerations of Lithium-Ion Batteries, J. Power Sources, 83, 1 (1999) [17] T. Yamauchi, K. Mizushima, Y. Satoh, and S. Yamad, Development of a Simulator for Both Property and Safety of a Lithium Secondary Battery, J. Power Sources, 136, 99 (2004) [18] T. Kawai, Numerical Analysis for Internal Short-Circuit of Lithium-Ion Batteries, ECS Meeting Abstract, MA2005-02, 70 (2005) [19] T. Kawai, Modeling for Thermal Behavior of Lithium-Ion Batteries, ECS Meeting Abstract, MA2006-02, 327 (2006) [20] W. Cai, H. Wang, H. Maleki, J. Howard, and E. Lara-Curzio, Experimental Simulation of Internal Short-circuit in Li-Ion and Li-Ion-Polymer Cells, J. Power Sources 196, 7779 (2011) [21] W. Zhao, and C. Y. Wang, Electrochemical-Thermal Coupled Modeling of Internal Short-Circuit by a Metal Particle in a Li-Ion Cell, ECS Meeting Abstract, MA2012-01, 536 (2012) [22] P. Ramadass, B. Haran, P.M. Gomadam, R. White, and B. N. Popov, Development of First Principles Capacity Fade Model for Li-Ion Cells, J. Electrochem. Soc., 151, A196 (2004) [23] G. Ning, R. E. White, and B. N. Popov, A Generalized Cycle Life Model of Rechargeable Li-Ion Batteries, Electrochimica Acta, 51, 2012, (2006) [24] J. Wang, P. Liu, J. Hicks-Garner, E. Sherman, S. Soukiazian, M. Verbrugge, H. Tataria, J. Musser, and P. Finamore, Cycle-Life Model for Graphite-LiFePO4 Cells, J. Power Sources, 196, 3942 (2011) [25] M. B. Pinson and M. Z. Bazant, Theory of SEI Formation in Rechargeable Batteries: Capacity Fade, Accelerated Aging and Lifetime Prediction, J. Electrochem. Soc., 160, A243 (2013) [26] E. Martinez-Rosas, R. Vasquez-Medrano, and A. Flores-Tlacuahuac, Modeling and Simulation of Lithium-Ion Batteries, Computers and Chemical Engineering, 35, 1937 (2011) [27] S. Chacko and Y. M. Chung, Thermal Modelling of Li-Ion Polymer Battery for Electric Vehicle Drive Cycles, J. Power Sources, 213, 296 (2012) [28] C. Y. Wang and V. Srinivasan, Computational Battery Dynamics (CBD)—Electrochemical/Thermal Coupled Modeling and Multi-Scale Modeling, J. Power Sources, 110, 364 (2002) [29] K. C. Chiu, C. H. Lin, and K. C. Chen, Study of Temperature Effect on Lithium-Ion Batteries Connected in Series, The 36th National Conference on Theoretical and Applied Mechanics (2012) [30] G. Luo and C.Y. Wang, Chap.6 in Lithium-Ion Batteries: Advanced Materials and Technologies, CRC Press (2011) [31] K. Mizushima, P. C. Jones, P. J. Wiseman, and J. B. Goodenough, LixCoO2 (0<x≤-1): A New Cathode Material for Batteries of High Energy Density, Materials Research Bulletin, 15, 783 (1980) [32] M. S. Whittingham, Lithium Batteries and Cathode Materials, Chemical Reviews, 104, 4271 (2004) [33] P. Kurzweil and K. Brandt, Secondary Batteries—Lithium Rechargeable Systems | Overview, Encyclopedia of Electrochemical Power Sources, 1, (2009) [34] G. Singh, G. Ceder, and M. Z. Bazant, Intercalation Dynamics in Rechargeable Battery Materials: General Theory and Phase-Transformation Waves in LiFePO4, Electrochimica Acta, 53, 7599 (2008) [35] D. Burch, G. Singh, G. Ceder, and M. Z. Bazant, Phase-Transformation Wave Dynamics in LiFePO4, Solid State Phenomena, 139, 95 (2008) [36] P. Bai, D. A. Cogswell, and M. Z. Bazant, Suppression of Phase Transformations in LiFePO4 during Battery Discharge, Nano Letters, 11, 4890 (2011) [37] http://www.bcg.com/documents/file36615.pdf [38] M. Safari and C. Delacourt, Modeling of a Commercial Graphite/LiFePO4 Cell, J. Electrochem. Soc., 158, A562 (2011) [39] L. O. Valoen and J. N. Reimers, Transport Properties of LiPF6-Based Li-Ion Battery Electrolytes, J. Electrochem. Soc., 152, A882 (2005) [40] R. E. Gerver and J. P. Meyers, Three-Dimensional Modeling of Electrochemical Performance and Heat Generation of Lithium-Ion Batteries in Tabbed Planar Configurations, J. Electrochem. Soc., 158, A835 (2011) [41] 宋秉儒, 模擬電動車鋰離子電池模組佈置的熱流特性, 國立中央大學機械工程研究所碩士論文 (2011) [42] Data collected from officially released information on the websites of EVs’ and HEVs’ manufactures. [43] Y. J. Liu, X. H. Li, H. J. Guo, Z. X. Wang, Q. Y. Hu, W. J. Peng, Y. Yang, and R. F. Liang, Improvement of Cycling Performance of Manganese Spinel Battery, J. Cent. South Univ. (Science and Technology), 39, 897 (2008) [44] G. Ning and B. N. Popov, Cycle Life Modeling of Lithium-Ion Batteries, J. Electrochem. Soc., 151, A1584 (2004) [45] T. M. Bandhauer, S. Garimella, and T. F. Fuller, A Critical Review of Thermal Issues in Lithium-Ion Batteries, J. Electrochem. Soc., 158, R1 (2011) [46] P. Ramadass, B. Haran, R. White, and B. N. Popov, Performance Study of Commercial LiCoO2 and Spinel-Based Li-Ion Cells, J. Power Sources, 111, 210 (2002) [47] P. Arora, R.E. White, and M. Doyle, Capacity Fade Mechanisms and Side Reactions in Lithium-Ion Batteries, J. Electrochem. Soc. 145, 3647 (1998) [48] R. Fong, U. Von Sacken, and J.R. Dahn, Studies of Lithium Intercalation into Carbons using Non-Aqueous Electrochemical Cells, J. Electrochem. Soc. 137, 2009 (1990) [49] Y. Ein-Eli, B. Markovsky, D. Aurbach, Y. Carmeli, H. Yamin, and S.Luski, The Dependence of the Performance of Li/C Intercalation Anodes for Li-Ion Secondary Batteries on the Electrolyte Solution Composition, Electrochim. Acta 39, 2559 (1994) [50] J.R. Dahn, E.W. Fuller, M. Obravae, and U. Von Sacken, Thermal Stability of LixCoO2, LixNiO2 and λ-MnO2 and Consequences for the Safety of Li-Ion Cells, Solid State Ionics 69, 265 (1994) [51] E. Peled, Fundamentals of Lithium and Lithium-Ion Electrode Reactions in Polymer and Liquid Electrolytes, Proc. Electrochem. Soc. 94-28, 1 (1995) [52] E. Peled, Lithium Stability and Film Formation in Organic and Inorganic Electrolyte for Lithium Battery Systems, in: J.P. Gabano (Ed.), Lithium Batteries, Academic Press, New York (1983) [53] M.C. Smart, B.V. Ratnakumar, S. Surampudi, Y. Wang, X. Zhang, and B. Fultz, Irreversible Capacities of Graphite in Low-Temperature Electrolytes for Lithium-Ion Batteries, J. Electrochem. Soc. 146, 3963 (1999) [54] R.J. Gummow, A. de Kock, and M.M. Thackeray, Improved Capacity Retention in Rechargeable 4 V Lithium/Lithium-Manganese Oxide (Spinel) Cells, Solid State Ionics, 69, 59 (1994) [55] J.M. Tarascon, W.R. McKinnon, F. Coowar, T.N. Bowmer, G. Amatucci, and D. Guyomard, Synthesis Conditions and Oxygen Stoichiometry Effects on Lithium Insertion into the Spinel LiMn2O4, J. Electrochem. Soc., 141, 1421 (1994) [56] E. Martinez-Rosas, Modelamiento y Simulacion de Baterias de Ion-Litio, Master Thesis, Universidad Nacional Autonoma de Mexico (2010) [57] J. Chen, C. Buhrmester, and J. R. Dahn, Chemical Overcharge and Overdischarge Protection for Lithium-Ion Batteries, Electrochemical and solid-state letters, 8, A59 (2005) [58] C. Buhrmester, L. Moshurchak, R. L. Wang, and J. R. Dahn, Phenothiazine Molecules Possible Redox Shuttle Additives for Chemical Overcharge and Overdischarge Protection for Lithium-Ion Batteries, J. Electrochem. Soc., 153, A288 (2006) [59] K. Brandt, Historical Development of Secondary Lithium Batteries, Solid State Ionics, 69, 173 (1994) [60] K. Kumai, H. Miyashiro, Y. Kobayashi, K. Takei, and R. Ishikawa, Gas Generation Mechanism due to Electrolyte Decomposition in Commercial Lithium-Ion Cell, J. Power Sources, 81-82, 715 (1999) [61] T.D. Hatchard, D. D. MacNeil, A. Basu, and J. R. Dahn, Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells, J. Electrochem. Soc., 148, A755 (2001) [62] G. H. Kim, A. Pesaran, and R. Spotnitz, A Three-Dimensional Thermal Abuse Model for Lithium-Ion Cells, J. Power Sources, 170, 476 (2007) [63] R. Spotnitz and J. Franklin, Abuse Behavior of High-Power, Lithium-Ion Cells, J. Power Sources 113, 81 (2003) [64] H. Maleki and J. N. Howard, Internal Short Circuit in Li-Ion Cells, J. Power Sources, 191, 568 (2009) [65] T. G. Zavalis, M. Behm, and G. Lindbergh, Investigation of Short-Circuit Scenarios in a Lithium-Ion Battery Cell, J. Electrochem. Soc., 159, A848 (2012) [66] X. Meng and B. Wen, Current Situation and Development Trend of Standards of Lithium Batteries for Electric Vehicles, CHINA STANDARDIZATION, March/April, 62 (2012) [67] 呂學隆, 由 Battery Japan 2013 觀察全球鋰電池產業與市場發展現況, 材料世界網 (2013) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/61541 | - |
dc.description.abstract | 在車禍發生時,電動汽車之電池組極有可能發生穿刺的情形。透過一套標準的電池穿刺試驗方法,特定電池組在發生穿刺後的行為即可以被顯現。然而,穿刺試驗通常需要花費較高的時間與成本。因此,只要透過結合多孔電極理論與電池熱破壞方程式,電池穿刺試驗將能夠利用模擬進行相關的分析。
此篇論文針對一個由九顆電池堆疊而成的電池組進行討論。利用我們所發展的模型,電池穿刺試驗之模擬與實驗結果相當吻合。除此之外,為了增加電池組之安全性,我們亦模擬了將一種特定的防火材料(REDDEX)加入電池組中的效益。在模擬中,我們比對了三種不同REDDEX的成效,並且透過與實驗的結合,我們證明了加入REDDEX將對電池組之安全性有顯著的提升。 除了電池組之安全設計,此篇論文亦分析了其在正常工作狀態下之性能。在實際運用的情形中,為了能夠控制電動汽車電池組之溫度,常見的方式為將冷空氣直接吹入電池組當中,利用熱對流降低電池的溫度。但是基於個別電池擺放位置的不同所造成的不均勻散熱流場,電池組中的每一顆電池將難以保持在相同的溫度。雖然眾所周知電池溫度的差異會對其放電電壓與容量造成影響,但是針對其程度,目前仍然需要更進一步的定性與定量分析。此分析可以透過我們的電池組電化學模擬來達成。 我們模擬了一個由串聯十顆26650磷酸鋰鐵鋰離子電池所組成之電池組的循環壽命。針對每一顆電池,我們以直接給定個別電池不同溫度的方式,形成一個由十顆性能不均的電池所串聯而成的電池組。由於其放電能力的不一致,我們的模擬結果顯示此情形將會造成電池組容量的下降,並且,其下降的速度將隨溫度差異的增加而上升。針對溫度不均對電池組壽命的影響,一個更詳細與完整的分析將會在此篇論文中呈現與討論。 | zh_TW |
dc.description.abstract | Battery pack nail penetration is likely to occur in electric car collisions. Therefore, to demonstrate the behavior of a specific battery pack when subjected to nail penetration, a standard nail penetration test has been performed. However, conducting such experiment could be time and money consuming. As a result, by combining the porous electrode theory and thermal abuse equations, the battery pack nail penetration test could be analyzed via simulation.
The case of a nine-cell battery pack nail penetration test was studied. By using the developed model, the simulation results agree well with the experiment. In addition, to improve the safety of battery packs, a specific fireproof material, REDDEX, was installed into the assembly, and a corresponding simulation was carried out. Three types of REDDEX was compared by both numerical modeling and experiment, where it is shown that an enhanced safety could be obtained by applying the material. Other than safety designs, the performance of battery pack is also investigated. In real-life application of electric vehicles, battery packs require thermal management systems to control the temperature within. A practical method is to apply conditioned air directly into the battery packs, cooling the cells by convection. But due to a nonuniform cooling flow caused by the layout of the cells, it is difficult to keep uniform temperature inside the battery packs. Although it is well known that temperature difference will affect the performance (discharge voltage and capacity) of the battery pack, the degree of this influence, however, requires further qualitative and quantitative analysis. This analysis can be performed by the aid of battery pack modeling. We simulated the battery pack cycle life property of ten 26650 LFP cells connected in series. For all the cells within, we artificially assigned ten different temperature values, generating a scenario of performance imbalance for the ten series connected cells. Due to the imbalance situation, our result has shown that the capacity degradation of the battery pack increases with temperature difference, and the undesired effect accelerates with increasing pack average temperature value. A more detailed and integrated analysis of battery packs formed by imbalance performance cells will be presented and discussed in this work. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T13:05:22Z (GMT). No. of bitstreams: 1 ntu-102-R00543043-1.pdf: 5488976 bytes, checksum: 55f7d394b10ff5d0290e79fd502391d7 (MD5) Previous issue date: 2013 | en |
dc.description.tableofcontents | Acknowledgement i
Abstract (Chinese) ii Abstract (English) iv Table of Contents vi List of Figures viii List of Tables xiv List of Symbols xv Chapter 1 Introduction 1 1.1 Background 1 1.2 Motivation and Innovations 4 1.3 Thesis Organization 10 Chapter 2 Literature Reviews 12 2.1 Electrochemical Models 12 2.2 Thermal Properties and Issues 12 2.3 Short-Circuit 14 2.4 Single Cell Cycle Life 15 Chapter 3 Review of Lithium-Ion Batteries 17 3.1 Formation and Performance 17 3.2 Variety of Positive Electrode Materials 23 Chapter 4 Porous Electrode Model 31 4.1 The Electrochemical Process 31 4.2 Model Equations and Boundary Conditions 34 Chapter 5 Modeling Lithium-Ion Batteries 46 5.1 The Battery Discharge Curve and the Effects of Electrochemical Parameters 46 5.1.1 Mass Transfer 48 5.1.2 Charge Transfer 53 5.1.3 Design Geometry 54 5.2 General Procedure for Simulating a Battery of Arbitrary Design 56 Chapter 6 Battery Pack Nail Penetration Safety Design 65 6.1 Single Cell Nail Penetration Experiment 65 6.2 Short-Circuited Battery Simulation 69 6.3 Modeling Battery Thermal Runaway 74 6.4 Single Cell Nail Penetration Simulation 78 6.5 REDDEX Installed Battery Pack Nail Penetration Experiment 89 6.5.1 Battery pack nail penetration test 89 6.5.2 Penetrating battery pack with REDDEX 93 6.6 REDDEX Installed Battery Pack Nail Penetration Simulation 98 6.7 Reinforcing the Battery Pack Safety with REDDEX 104 Chapter 7 Thermal Management of Series Connected Batteries 109 7.1 Simulating Temperature Effect on Single and Series Connected Batteries 110 7.1.1 Simulating an Isothermal 26650 LFP 2.3 Ah Cell 110 7.1.2 Model Coupling and Result 114 7.1.3 Cooling Effect on Series Connected Batteries 120 7.2 Capacity Fade of Lithium-Ion Batteries 124 7.2.1 Simulating Capacity Fade 125 7.2.2 Verification via Experiment 128 7.2.3 Model Advantages 130 7.3 Simulation of Temperature Difference Effect on Series Connected Batteries’ Cycle Life Performance 132 7.3.1 Simulated Temperature Distribution Scenario 133 7.3.2 Simulation Result 135 7.4 Temperature Effect Verification via Experiment 141 7.4.1 Experiment Setup 142 7.4.2 Pack Capacity Fade Result 143 Chapter 8 Conclusion and Future Works 147 8.1 Conclusion 147 8.2 Future Works 149 References 151 | |
dc.language.iso | en | |
dc.title | 利用電化學法探討鋰離子電池組穿刺安全設計與串聯溫度管理 | zh_TW |
dc.title | On the Nail Penetration Safety Design and Series Connection Thermal Management for Li-Ion Battery Pack with an Electrochemical Approach | en |
dc.type | Thesis | |
dc.date.schoolyear | 101-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 郭志禹(Chih-Yu Kuo),林祺皓(Chi-Hao Lin) | |
dc.subject.keyword | 鋰離子電池,穿刺,安全設計,電池串聯,循環壽命,溫度效應,熱管理,模擬, | zh_TW |
dc.subject.keyword | lithium-ion battery,nail penetration,safety design,series connection,cycle life,temperature effect,thermal management,simulation, | en |
dc.relation.page | 159 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2013-08-05 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 5.36 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。