請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60958
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 李佳翰(Jia-Han Li) | |
dc.contributor.author | Cheng-Han Tsai | en |
dc.contributor.author | 蔡承翰 | zh_TW |
dc.date.accessioned | 2021-06-16T10:38:27Z | - |
dc.date.available | 2018-08-27 | |
dc.date.copyright | 2013-08-27 | |
dc.date.issued | 2013 | |
dc.date.submitted | 2013-08-13 | |
dc.identifier.citation | [1] K. A. Goldberg and I. Mochi, “Wavelength-specific reflections: A decade of extreme ultraviolet actinic,” J. Vac. Sci. Technol. B 28, C6E1-C6E10 (2010).
[2] H. Kinoshita, K. Hamamoto, N. Sakaya, M. Hosoya, and T. Watanabe, “Aerial Image Mask Inspection System for Extreme Ultraviolet Lithography,” Jpn. J. Appl. Phys. 46, 6113-6117 (2007). [3] K. A. Goldberg, A. Barty, P. Seidel, K. Edinger, R. Fettig, P. Kearney, H. Han and O. R. Wood II, “EUV and non-EUV inspection of reticle defect repair sites,” Proc. SPIE 6517, 65170C (2007). [4] S. Herbert, A. Maryasov L. Juschkin R. Lebert and K. Bergmann, “Defect inspection with an EUV microscope,” Proc. SPIE 7545, 75450O (2010). [5] K. A. Goldberg, I. Mochi, M. Benk, A. P. Allezy, M. R. Dickinson, C. W. Cork, D. Zehm, J. B. Macdougall, E. Anderson, F. Salmassi, W. L. Chao, V. K. Vytla, E. M. Gullikson, J. C. DePonte, M. S. Jones, D. Van Camp, J. F. Gamsby, W. B. Ghiorso, H. Huang, W. Cork, E. Martin, E. Van Every, E. Acome, V. Milanovic, R. Delano, P. P. Naulleau, and S. B. Rekawa, “Commissioning an EUV mask microscope for lithography generations reaching 8 nm,” Proc. SPIE 8679 867919, (2013). [6] K. A. Goldberg, P. Naulleau, A. Barty, S. Rekawa, C. D. Kemp, R. Gunion, F. Salmassi, E. Gullikson, E. Anderson, H.-S. Han, “Benchmarking EUV mask inspection beyond 0.25 NA,” Proc. SPIE 6730, 67305E (2007). [7] P. P. Naulleau, I. Mochi, K. A. Goldberg, “Optical modeling of Fresnel zoneplate microscopes,” Applied Optics 50 (20), 3678-3684 (2011). [8] T. Harada, J. Kishimoto, T. Watanabe, H. Kinoshita, and D. G. Lee, ”Mask observation results using a coherent extreme ultraviolet scattering microscope at NewSUBARU,” J. Vac. Sci. Technol. B 27, 3203-3207 (2009). [9] T. Harada, M. Nakasuji, A. Tokimasa, T. Watanabe, Y. Usui, and H. Kinoshita, “Imaging of extreme-ultraviolet mask patterns using coherent extreme-ultraviolet scatterometry microscope based on coherent diffraction imaging,” Jpn. J. Appl. Phys. 51, 06FB08 (2012). [10] T. Harada, M. Nakasuji, T. Kimura, Y. Nagata, T. Watanabe and H. Kinoshita, “The Coherent EUV Scatterometry Microscope for Actinic Mask Inspection and Metrology,” Proc. SPIE 8081, 80810K (2011). [11] T. Harada, M. Nakasuji, M. Tada, Y. Nagata, T. Watanabe, and H. Kinoshita, “Critical Dimension Measurement of an Extreme-Ultraviolet Mask Utilizing Coherent Extreme-Ultraviolet Scatterometry Microscope at NewSUBARU,” Jpn. J. Appl. Phys. 50, 06GB03 (2011). [12] T. Harada, M. Nakasuji, A. Tokimasa, T. Watanabe, Y. Usui, and H. Kinoshita, “Defect Characterization of an Extreme-Ultraviolet Mask Using a Coherent Extreme-Ultraviolet Scatterometry Microscope,” Jpn. J. Appl. Phys. 51, 06FB08 (2012). [13] J. Miao, R. L. Sandberg and C. Song, “Coherent Diffraction Imaging with X-rays,” (invited review) IEEE J. Sel. Top. Quant, 18, 399-410 (2012). [14] R. W. Gerchberg and W. O. Saxton, “A practical algorithm for the determination of the phase from image and diffraction plane pictures,” Optik 35, 237 (1972). [15] J. R. Fienup, “Reconstruction of an object from the modulus of its Fourier transform,” Opt. Lett. 3, 27-29 (1978). [16] J. R. Fienup, 'Phase retrieval algorithms: a comparison,' Appl. Opt. 21, 2758-2769 (1982). [17] E. H. Anderson, “Specialized Electron Beam Nanolithography for EUV and X-Ray Diffractive Optics,” IEEE J. QUANTUM ELECTRON. 42, 27-35 (2006). [18] K. A. Goldberg, P. Naulleau, I. Mochi, E. H. Anderson, S. B. Rekawa, C. D. Kemp, R. F. Gunion, H.-S. Han, and S. Huh, “Actinic extreme ultraviolet mask inspection beyond 0.25 numerical aperture,” J. Vac. Sci. Technol. B 26, 2220-2224 (2008). [19] F. Brizuela, Y. Wang, C. A. Brewer, F. Pedaci, W. Chao, E. H. Anderson, Y. Liu, K. A. Goldberg, P. Naulleau, P. Wachulak, M. C. Marconi, D. T. Attwood, J. J. Rocca, and C. S. Menoni, “Microscopy of extreme ultraviolet lithography masks with 13.2 nm tabletop laser illumination,” Opt. Lett. 34, 271-273 (2009). [20] D. S. Kim, J. J. Park, K. H. Lee, J. Park, and C. H. Nam, “Soft X-ray Microscope Constructed with 130-nm Spatial Resolution Using a High Harmonic X-ray Source,” Jpn. J. Appl. Phys. 48, 026506 (2009). [21] D. T. Attwood, Soft X-Rays and Extreme Ultraviolet Radiation: Principles and Applications, Cambridge University Press, (1999). [22] W. L. Chao, J. Kim, S. Rekawa, P. Fischer, and E. H. Anderson, “Demonstration of 12 nm resolution Fresnel zone plate lens based soft x-ray microscopy,” Opt. Express 17, 17669-17677 (2009). [23] W. Chao, B. D. Harteneck, J. A. Liddle, E. H. Anderson, and D. T. Attwood, “Soft X-ray microscopy at a spatial resolution better than 15 nm,” Nature 435, 1210-1213 (2005). [24] W. Chao, E. H. Anderson, P. Fischer, and D. H. Kim, “Towards sub-10 nm resolution zone plates using the overlay nanofabrication processes,” Proc. SPIE 6883, 688309 (2008). [25] G. C. Yin, Y. F. Song, M. T. Tang, F. R. Chen, K. S. Liang, F. W. Duewer, M. Feser, W. B. Yun, and H. P. D. Shieh, “30 nm resolution x-ray imaging at 8 keV using third order diffraction of a zone plate lens objective in a transmission microscope,” Appl. Phys. Lett. 89, 221122 (2006). [26] W. Yun, B. Lai, Z. Cai, J. Maser, D. Legnini, Z. Chen, A. A. Krasonperova, Y. Vladimirsky, F. Cerrina, E. Di Fabrizio, and M. Gentili, “Nanometer focusing of hard x rays by phase zone plates,” Rev. Sci. Instrum. 70, 2238-2241 (1999). [27] M. J. Simpson and A. G. Michette, “Imaging properties of modified Fresnel zone plates,” Opt. Acta, 31, 403- 413 (1984). [28] J. Kirz, “Phase zone plates for x rays and the extreme uv,” J. Opt. Soc. Am. 64, 301-309 (1974). [29] I. Snigireva, A. Snigirev, V. Kohn, V. Yunkin, M. Grigoriev, S. Kuznetsov, G. Vaughan, and M. Di Michiel, “ Focusing high energy X-rays with stacked Fresnel zone plates,” Phys. Status Solidi A-Appl. Mat. 204, 2817-2823 (2007). [30] S. D. Shastri, J. M. Maser, B. Lai and J. Tys, “Microfocusing of 50 keV undulator radiation with two stacked zone plates,” Opt. Commun. 197, 9-14 (2001). [31] P. Srisungsitthisunti, O. K. Ersoy, and X. Xu, “Volume Fresnel zone plates fabricated by femtosecond laser direct writing,” Appl. Phys. Lett. 90, 011104 (2007). [32] J. M. Zuo, I. Vartanyants, M. Gao, R. Zhang and L. A. Nagahara, “Atomic Resolution Imaging of a Carbon Nanotube from Diffraction Intensities,” Science 300, 1419-1421 (2001). [33] W. Meyer-Ilse, D. Hamamoto, A. Nair, S. A. Lelievre, G. Denbeaux, L. Johnson, A. L. Pearson, D. Yager, M. A. Legros and C. A. Larabel, “High resolution protein localization using soft X-ray microscopy,” J Microsc. 201, 395-403 (2001). [34] C. A Bennett, Principles of Physical Optics, Wiley, (2008). [35] F. L. Pedrotti, L. M. Pedrotti and L. S. Pedrotti, Introduction to Optics, Pearson Education, (2006). [36] J. W. Goodman, Introduction to Fourier Optics, McGraw-Hill, (2005). [37] I. J. Cooper, C. J. R. Sheppard, and M. Sharma, “Numerical integration of diffraction integrals for a circular aperture,” Optik 7, 293-298 (2002). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/60958 | - |
dc.description.abstract | 極紫外光微影術是下一世代微影製程的候選技術之一。然而,極紫外光微影在商業大量製造上還有許多障礙尚未克服,其中之一為無缺陷光罩的製造。在本文中,為了檢測光罩上缺陷的狀況,我們以同步輻射做為光源,建構了同調散射顯微鏡,並探討利用散射訊號重建光罩圖像的演算法。
在極紫外光波段中,菲涅耳波帶片為一重要之繞射聚光元件,其解析度與最外圈線寬大小相關,因此聚焦效果受到製程技術的限制。我們提出額外圈數的概念,克服最外圈受製程限制的影響,提升解析度。在本文中,我們在製程限制及極紫外光波段的情形下,利用菲涅耳-克希荷夫繞設公式探討改良式的菲涅耳波帶片。 | zh_TW |
dc.description.abstract | Extreme ultraviolet (EUV) lithography is currently the leading next generation lithography candidate for high-volume manufacturing. However, several technical hurdles obstruct the commercialization of EUV lithography. One of the problems is the difficulty to fabricate the EUV masks free of printable defects. To inspect the defect profile, we construct a coherent scattering microscopy (CSM) using synchrotron source. Also, the algorithm which is used for the reconstruction of mask image is studied in this thesis.
In EUV wavelength, Fresnel zone plate (FZP) is one of the most important diffractive optical elements for imaging and focusing. The resolution of FZP depends on the line width of outermost zone, that is, resolution is limited by the fabrication. We propose a concept of additional zones to overcome the limit of line width. The Modified FZP are discussed by Fresnel-Kirchhoff diffraction formula in EUV wavelength with the fabrication limit of line width. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T10:38:27Z (GMT). No. of bitstreams: 1 ntu-102-R00525073-1.pdf: 3034800 bytes, checksum: 8a562e5752941ffd51fb1407b2360d6a (MD5) Previous issue date: 2013 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 ii ABSTRACT iii STATEMENT OF CONTRIBUTION iv CONTENTS v LIST OF FIGURES vii LIST OF TABLES xii Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Literature Review 1 1.3 Framework 4 Chapter 2 Extreme Ultraviolet Mask Inspection 5 2.1 Coherent Scattering Microscopy 5 2.1.1 Coherent Diffraction Imaging 5 2.1.2 Image Reconstruction Algorithm 6 2.2 Beam properties in CSM 9 2.2.1 Coherence Property 9 2.2.2 Ray Transfer Matrix Analysis 10 2.2.3 Gaussian beam property 12 2.3 Optical path Design and Experiment Setup 15 2.4 Simulation of Image Reconstruction 17 2.4.1 Image Reconstruction with Different Object Patterns 17 2.4.2 Image Reconstruction with Different Imaging Size 18 Chapter 3 Modified Fresnel Zone Plate 31 3.1 Basic Zone Plate Theory 31 3.2 Modified Zone Plate 33 3.2.1 Zone Plate with Central Stop 33 3.2.2 Zone Plate with Additional zones 34 3.2.3 Simulation method 35 3.3 Simulation Results 36 3.3.1 The Variation in Number of Total Zones, Blocked Zones and Additional Zones 37 3.3.2 Comparison of Standard FZP and Modified FZP 38 Chapter 4 Conclusions and Future Work 54 4.1 Conclusions 54 4.2 Future work 55 REFERENCE 57 VITA 62 | |
dc.language.iso | en | |
dc.title | 散射式極紫外光光罩檢測系統設計及高解析度與高場強之極紫外光波帶片設計 | zh_TW |
dc.title | Design of Extreme Ultraviolet Mask Inspection System by Configuring the Scattering Signals and Design of High Resolution and Large Field Intensity Modified Zone Plates | en |
dc.type | Thesis | |
dc.date.schoolyear | 101-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 許文翰(Wen-Hann Sheu),許博淵(Bor-Yuan Shew),蔡坤諭(Kuen-Yu Tsai),林俊宏(Chun-Hung Lin) | |
dc.subject.keyword | 極紫外光微影,同調繞射影像術,相位重建,菲涅耳波帶片, | zh_TW |
dc.subject.keyword | extreme ultraviolet lithography,coherent diffractive imaging,phase retrieval,Fresnel zone plate, | en |
dc.relation.page | 62 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2013-08-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 工程科學及海洋工程學研究所 | zh_TW |
顯示於系所單位: | 工程科學及海洋工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-102-1.pdf 目前未授權公開取用 | 2.96 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。