請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56724
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 沈弘俊(Horn-Jiunn Sheen) | |
dc.contributor.author | Yu-Jui Fan | en |
dc.contributor.author | 范育睿 | zh_TW |
dc.date.accessioned | 2021-06-16T05:44:29Z | - |
dc.date.available | 2019-08-25 | |
dc.date.copyright | 2014-08-25 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-08-11 | |
dc.identifier.citation | [1] J. Pawley, Handbook of biological confocal microscopy: Springer, 2010.
[2] A. L. Givan, Flow cytometry: first principles: John Wiley & Sons, 2004. [3] H. M. Shapiro, Practical flow cytometry: John Wiley & Sons, 2005. [4] B. Derjaguin, G. Ja Vlasenko, A. Storozhilova, and N. Kudrjavtseva, 'Flow-ultramicroscopic method of determining the number concentration and particle size analysis of aerosols and hydrosols,' Progress in Surface Science, vol. 45, pp. 345-367, 1994. [5] A. Moldavan, 'Photo-electric technique for the counting of microscopical cells,' Science, vol. 80, pp. 188-189, 1934. [6] F. T. Gucker Jr, C. T. O'Konski, H. B. Pickard, and J. N. Pitts Jr, 'A Photoelectronic Counter for Colloidal Particles1,' Journal of the American Chemical Society, vol. 69, pp. 2422-2431, 1947. [7] R. M. Ferry, L. E. Farr, and M. G. Hartman, 'The preparation and measurement of the concentration of dilute bacterial aerosols,' Chemical reviews, vol. 44, pp. 389-417, 1949. [8] F. T. Gucker and C. O'Konski, 'Electronic methods of counting aerosol particles,' Chemical reviews, vol. 44, pp. 373-388, 1949. [9] P. J. Stopa, 'The flow cytometry of Bacillus anthracis spores revisited,' Cytometry, vol. 41, pp. 237-244, 2000. [10] H. R. Walter and C. H. Wallace, 'Apparatus and Method for Measuring a Dividing Particle Size of a Particulate System,' ed: US Patent 3,557,352, 1971. [11] L. A. Kamentsky, M. R. Melamed, and H. Derman, 'Spectrophotometer: new instrument for ultrarapid cell analysis,' Science, vol. 150, pp. 630-631, 1965. [12] L. A. Kamentsky and M. R. Melamed, 'Spectrophotometric cell sorter,' Science, vol. 156, pp. 1364-1365, 1967. [13] M. J. Fulwyler, 'Electronic separation of biological cells by volume,' Science, vol. 150, pp. 910-911, 1965. [14] R. G. Sweet, 'High frequency recording with electrostatically deflected ink jets,' Review of scientific instruments, vol. 36, pp. 131-136, 2004. [15] M. Van Dilla, M. Fulwyler, and I. Boone, 'Volume distribution and separation of normal human leucocytes,' Experimental Biology and Medicine, vol. 125, pp. 367-370, 1967. [16] H. R. Hulett, W. A. Bonner, J. Barrett, and L. A. Herzenberg, 'Cell sorting: automated separation of mammalian cells as a function of intracellular fluorescence,' Science, vol. 166, pp. 747-749, 1969. [17] M. A. Van Dilla, T. Truiullo, P. F. Mullaney, and J. Coultex, 'Cell microfluorometry: a method for rapid fluorescence measurement,' Science, vol. 163, pp. 1213-1214, 1969. [18] G. Vesey, J. Narai, N. Ashbolt, K. Williams, and D. Veal, 'Detection of specific microorganisms in environmental samples using flow cytometry,' Methods in cell biology, vol. 42, pp. 489-522, 1993. [19] F. S. Ligler and J. S. Kim, The microflow cytometer: Pan Stanford Publishing, 2010. [20] M. L. F. J. Briggs, V. E. Ghazarossian andM. J. Becker,, 'Fiber optic probe cytometer.,' J. Immunol.Methods, vol. 81, pp. 73-81, 1985. [21] H. M. Shapiro and M. Hercher, 'Flow cytometers using optical waveguides in place of lenses for specimen illumination and light collection,' Cytometry, vol. 7, pp. 221-223, 1986. [22] D. Sobek, A. Young, M. Gray, and S. Senturia, 'A microfabricated flow chamber for optical measurements in fluids,' in Micro Electro Mechanical Systems, 1993, MEMS'93, Proceedings An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems. IEEE., 1993, pp. 219-224. [23] J. R. Anderson, D. T. Chiu, R. J. Jackman, O. Cherniavskaya, J. C. McDonald, H. Wu, et al., 'Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping,' Analytical Chemistry, vol. 72, pp. 3158-3164, 2000. [24] N. Watkins, B. M. Venkatesan, M. Toner, W. Rodriguez, and R. Bashir, 'A robust electrical microcytometer with 3-dimensional hydrofocusing,' Lab on a Chip, vol. 9, pp. 3177-3184, 2009. [25] R. Rodriguez-Trujillo, O. Castillo-Fernandez, M. Garrido, M. Arundell, A. Valencia, and G. Gomila, 'High-speed particle detection in a micro-Coulter counter with two-dimensional adjustable aperture,' Biosensors and Bioelectronics, vol. 24, pp. 290-296, 2008. [26] C. Simonnet and A. Groisman, 'High-throughput and high-resolution flow cytometry in molded microfluidic devices,' Analytical chemistry, vol. 78, pp. 5653-5663, 2006. [27] A. Kummrow, J. Theisen, M. Frankowski, A. Tuchscheerer, H. Yildirim, K. Brattke, et al., 'Microfluidic structures for flow cytometric analysis of hydrodynamically focussed blood cells fabricated by ultraprecision micromachining,' Lab on a Chip, vol. 9, pp. 972-981, 2009. [28] S. C. Lin, P. W. Yen, C. C. Peng, and Y. C. Tung, 'Single channel layer, single sheath-flow inlet microfluidic flow cytometer with three-dimensional hydrodynamic focusing,' Lab on a Chip, 2012. [29] R. Yang, D. L. Feeback, and W. Wang, 'Microfabrication and test of a three-dimensional polymer hydro-focusing unit for flow cytometry applications,' Sensors and Actuators A: Physical, vol. 118, pp. 259-267, 2005. [30] J. P. Golden, J. S. Kim, J. S. Erickson, L. R. Hilliard, P. B. Howell, G. P. Anderson, et al., 'Multi-wavelength microflow cytometer using groove-generated sheath flow,' Lab Chip, vol. 9, pp. 1942-1950, 2009. [31] H.-C. Lee, H.-H. Hou, R.-J. Yang, C.-H. Lin, and L.-M. Fu, 'Microflow cytometer incorporating sequential micro-weir structure for three-dimensional focusing,' Microfluidics and nanofluidics, vol. 11, pp. 469-478, 2011. [32] X. Mao, S. C. S. Lin, C. Dong, and T. J. Huang, 'Single-layer planar on-chip flow cytometer using microfluidic drifting based three-dimensional (3D) hydrodynamic focusing,' Lab on a Chip, vol. 9, pp. 1583-1589, 2009. [33] X. Mao, A. A. Nawaz, S. C. S. Lin, M. I. Lapsley, Y. Zhao, J. P. McCoy, et al., 'An integrated, multiparametric flow cytometry chip using “microfluidic drifting” based three-dimensional hydrodynamic focusing,' Biomicrofluidics, vol. 6, p. 024113, 2012. [34] M. G. Lee, S. Choi, and J.-K. Park, 'Three-dimensional hydrodynamic focusing with a single sheath flow in a single-layer microfluidic device,' Lab on a Chip, vol. 9, pp. 3155-3160, 2009. [35] D. Di Carlo, 'Inertial microfluidics,' Lab on a Chip, vol. 9, pp. 3038-3046, 2009. [36] S. C. Hur, H. T. K. Tse, and D. Di Carlo, 'Sheathless inertial cell ordering for extreme throughput flow cytometry,' Lab on a Chip, vol. 10, pp. 274-280, 2010. [37] A. A. S. Bhagat, S. S. Kuntaegowdanahalli, N. Kaval, C. J. Seliskar, and I. Papautsky, 'Inertial microfluidics for sheath-less high-throughput flow cytometry,' Biomedical microdevices, vol. 12, pp. 187-195, 2010. [38] J. Oakey, R. W. Applegate Jr, E. Arellano, D. D. Carlo, S. W. Graves, and M. Toner, 'Particle focusing in staged inertial microfluidic devices for flow cytometry,' Analytical chemistry, vol. 82, pp. 3862-3867, 2010. [39] K. Goda, K. Tsia, and B. Jalali, 'Serial time-encoded amplified imaging for real-time observation of fast dynamic phenomena,' Nature, vol. 458, pp. 1145-1149, 2009. [40] K. Goda, A. Ayazi, D. R. Gossett, J. Sadasivam, C. K. Lonappan, E. Sollier, et al., 'High-throughput single-microparticle imaging flow analyzer,' Proceedings of the National Academy of Sciences, vol. 109, pp. 11630-11635, 2012. [41] R. Völkel, M. Eisner, and K. Weible, 'Miniaturized imaging systems,' Microelectronic Engineering, vol. 67, pp. 461-472, 2003. [42] A. W. Lohmann, 'Scaling laws for lens systems,' Applied optics, vol. 28, pp. 4996-4998, 1989. [43] L. P. Lee and R. Szema, 'Inspirations from biological optics for advanced photonic systems,' Science, vol. 310, pp. 1148-1150, 2005. [44] C. P. Lin, H. Yang, and C. K. Chao, 'Hexagonal microlens array modeling and fabrication using a thermal reflow process,' Journal of Micromechanics and Microengineering, vol. 13, pp. 775-781, 2003. [45] M. He, X.-C. Yuan, N. Ngo, J. Bu, and V. Kudryashov, 'Simple reflow technique for fabrication of a microlens array in solgel glass,' Optics letters, vol. 28, pp. 731-733, 2003. [46] A. Kouchiyama, I. Ichimura, K. Kishima, T. Nakao, K. Yaamaoto, G. Hashimoto, et al., 'Optical recording using high numerical-aperture microlens by plasma etching,' Jpn. J. Appl. Phys, vol. 41, p. 1825, 2002. [47] K. Zimmer, D. Hirsch, and F. Bigl, 'Excimer laser machining for the fabrication of analogous microstructures,' Applied Surface Science, vol. 96, pp. 425-429, 1996. [48] M. Wu, C. Park, and G. Whitesides, 'Fabrication of arrays of microlenses with controlled profiles using gray-scale microlens projection photolithography,' Langmuir, vol. 18, pp. 9312-9318, 2002. [49] Y. Ishii, S. Koike, Y. Arai, and Y. Ando, 'Ink-jet fabrication of polymer microlens for optical-I/O chip packaging,' Jpn. J. Appl. Phys, vol. 39, pp. 1490-1493, 2000. [50] N. Ong, Y. Koh, and Y. Fu, 'Microlens array produced using hot embossing process,' Microelectronic Engineering, vol. 60, pp. 365-379, 2002. [51] P. H. Huang, T. C. Huang, Y. T. Sun, and S. Y. Yang, 'Fabrication of large area resin microlens arrays using gas-assisted ultraviolet embossing,' Optics Express, vol. 16, pp. 3041-3048, 2008. [52] L. W. Pan, X. Shen, and L. Lin, 'Microplastic lens array fabricated by a hot intrusion process,' Journal of Microelectromechanical Systems, vol. 13, pp. 1063-1071, 2004. [53] L. T. Jiang, T. C. Huang, C. R. Chiu, C. Y. Chang, and S. Y. Yang, 'Fabrication of plastic microlens arrays using hybrid extrusion rolling embossing with a metallic cylinder mold fabricated using dry film resist,' Optics Express, vol. 15, pp. 12088-12094, 2007. [54] E. Schonbrun, C. Rinzler, and K. Crozier, 'Microfabricated water immersion zone plate optical tweezer,' Applied Physics Letters, vol. 92, p. 071112, 2008. [55] E. Schonbrun, J. Wong, and K. B. Crozier, 'Co- and cross-flow extensions in an elliptical optical trap,' Physical Review E, vol. 79, p. 042401, 2009. [56] E. Schonbrun, W. N. Ye, and K. B. Crozier, 'Scanning microscopy using a short-focal-length Fresnel zone plate,' Optics letters, vol. 34, pp. 2228-2230, 2009. [57] E. Schonbrun, A. Abate, P. Steinvurzel, D. Weitz, and K. Crozier, 'High-throughput fluorescence detection using an integrated zone-plate array,' Lab on a Chip, vol. 10, pp. 852-856, 2010. [58] E. Schonbrun, P. E. Steinvurzel, and K. B. Crozier, 'A microfluidic fluorescence measurement system using an astigmatic diffractive microlens array,' Optics Express, vol. 19, pp. 1385-1394, 2011. [59] C. K. Choi, C. H. Margraves, and K. D. Kihm, 'Examination of near-wall hindered Brownian diffusion of nanoparticles: Experimental comparison to theories by Brenner (1961) and Goldman et al.(1967),' Physics of Fluids, vol. 19, p. 103305, 2007. [60] E. P. Kartalov, C. Walker, C. R. Taylor, W. F. Anderson, and A. Scherer, 'Microfluidic vias enable nested bioarrays and autoregulatory devices in Newtonian fluids,' Proceedings of the National Academy of Sciences, vol. 103, pp. 12280-12284, 2006. [61] M. Zhang, J. Wu, L. Wang, K. Xiao, and W. Wen, 'A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips,' Lab on a Chip, vol. 10, pp. 1199-1203, 2010. [62] C. F. Carlborg, T. Haraldsson, M. Cornaglia, G. Stemme, and W. van der Wijngaart, 'A high-yield process for 3-d large-scale integrated microfluidic networks in PDMS,' Microelectromechanical Systems, Journal of, vol. 19, pp. 1050-1057, 2010. [63] J. M. Karlsson, T. Haraldsson, C. F. Carlborg, J. Hansson, A. Russom, and W. van der Wijngaart, 'Fabrication and transfer of fragile 3D PDMS microstructures,' Journal of Micromechanics and Microengineering, vol. 22, p. 085009, 2012. [64] J. H. Kang, E. Um, and J.-K. Park, 'Fabrication of a poly (dimethylsiloxane) membrane with well-defined through-holes for three-dimensional microfluidic networks,' Journal of Micromechanics and Microengineering, vol. 19, p. 045027, 2009. [65] J. Huft, D. J. Da Costa, D. Walker, and C. L. Hansen, 'Three-dimensional large-scale microfluidic integration by laser ablation of interlayer connections,' Lab on a Chip, vol. 10, pp. 2358-2365, 2010. [66] M. Li, S. Li, J. Wu, W. Wen, W. Li, and G. Alici, 'A simple and cost-effective method for fabrication of integrated electronic-microfluidic devices using a laser-patterned PDMS layer,' Microfluidics and nanofluidics, vol. 12, pp. 751-760, 2012. [67] Y.-C. Kung, K.-W. Huang, Y. Yang, Y.-J. Fan, and P.-Y. Chiou, 'Fabricatiion of 3D microfluidic networks with a hybrid stamp,' in Micro Electro Mechanical Systems (MEMS), 2013 IEEE 26th International Conference on, 2013, pp. 915-918. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56724 | - |
dc.description.abstract | 本篇論文是研究一個微光學元件整合的微流體晶片,並用於水珠、粒子、與多種細胞的高效能分析。這個微流體晶片是整合具有高折射率的微球透鏡於微流道晶片內,以提升螢光收集效益和平行檢測機制。在水珠檢測方面,透過一個水珠產生器在微流道上游產生水珠,並在下游將流道分枝為64個支流。在粒子和細胞檢測方面,細胞由入口處進入後,分支為32個平行流道,每個流道都有一對側向流,用以將細胞或粒子聚集成一條線排列。平行的32個流道同時檢測細胞實驗中,總效能可達每秒385,400 細胞檢測。而在這篇論文中,使用的微球形透鏡折射率為2.1,因此可以達到很短的焦距。當透鏡直接埋於流道底部,焦點仍然可以座落於流道內部。此方法提供可以使用較密集的流道,因此晶片可以較小,而同樣大小的雷射光點和相機的視野範圍,可以同時分析較多的流道。使用三維的微流道製程,可以提供每個流道都有一組側向流道,且不會增加側向流入口。這個方法解決了微流道在同時載入多流體時,需要解決的載體入口問題。而只要用一個側向流入口來供給64個側向流道、一個樣品入口來提供32個流道樣品流入、和一個出口,來達到同時32個流道檢測。 | zh_TW |
dc.description.abstract | This thesis reports the microfluidic devices with parallel detection channel embedded microoptics array for versatile high throughput multicolor fluorescence detection. These devices are realized by utilizing solid immersion micro ball lens arrays for high sensitivity and parallel fluorescence detection. For droplet detection, the droplets, produced by a droplet generator in the upstream of device, randomly flow into 64 parallel channels. For cell detection, the cells randomly flow into 32 channel, in which cells got aligned in the center stream. A total throughput of 358,400 cells/s has been accomplished. High refractive index (R.I.) micro ball lenses (R.I.=2.1) are embedded underneath PDMS channels close to cell detection zones in channels. This design permits patterning high N.A. micro ball lenses in a compact fashion for parallel fluorescence detection on a small footprint device. This cell detection device also utilizes 3D microfluidic fabrication to address fluid routing issues in two-dimensional parallel sheath focusing and allows simultaneous pumping of 32 sample channels and 64 sheath flow channels with only two inlets. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T05:44:29Z (GMT). No. of bitstreams: 1 ntu-103-D97543004-1.pdf: 3809120 bytes, checksum: b212907e75fdbb995e3bd1e036e99f1b (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 ii ABSTRACT iii CONTENTS iv LIST OF FIGURES vi LIST OF TABLES x Chapter 1 Introduction 1 1.1 Introduction 1 1.2 Motivations and objectives 3 1.3 Method and procedure 4 1.4 Thesis structure 4 Chapter 2 Literature review 7 2.1 History of flow cytometry 7 2.1.1 Flow cytometry 7 2.1.2 Cell sorter 10 2.1.3 Fluorescence label 12 2.2 Conventional flow cytometer 13 2.2.1 Fluidic system 13 2.2.2 Optical system 17 2.2.3 Light detection 18 2.3 Microfluidic flow cytometer 23 2.3.1 History of Microflow cytomter 23 2.3.2 Flow focusing technique 24 Chapter 3 System Layout 28 3.1 Embedded Microball Lens Array 31 3.1.1 Fabrication of embedded microball lens array 31 3.1.2 Simulation of microball lens 33 3.2 Microfluidic system 40 3.2.1 Microfluidic channel fabrication for droplet detection 40 3.2.2 Microfluidic channel with 2D flow focusing 41 3.2.3 Parallel and 3D flow focusing microfluidic channel 46 3.3 Optical system 49 Chapter 4 Experimental results 52 4.1 Droplet detection 52 4.1.1 Droplet generator 53 4.1.2 Fluorescent droplet detection 53 4.2 Fluorescent bead calibration 55 4.2.1 Fluorescent bead detection 55 4.2.2 Multicolor beads detection 57 4.3 Cell detection 59 4.3.1 Protocol of cell stain 59 4.3.2 Cell flow into sample 60 4.3.3 Multiple cell detection 62 Chapter 5 Conclusions 65 REFERENCES 68 LIST OF FIGURES Figure 1.1 The 2D plot of throughput-information 2 Figure 1.2 The objective of the study is to increase throughput of flow cytometer. 4 Figure 2.1 The main structure of fluidic system [3]. 15 Figure 2.2 Some aspects of fluid flow in a commercial flow cytometer [3]. 16 Figure 2.3 The N.A. of the objective lens w/o oil immersion [3]. 18 Figure 2.4 Prism for light separation [3]. 20 Figure 2.5 Dichroic mirror for light separation [3]. 21 Figure 2.6 Three ways using dichroic mirror to separate light with different wavelength [3]. 21 Figure 3.1 The process flow for fabricating solid immersion microball lens array in PDMS. 32 Figure 3.2 (a), (b) Images of a 100×100 microball lens array across a 1.3 cm × 1.3 cm area. (c) The SEM images showing the thin PDMS layer between embedded ball lenses and a channel. 33 Figure 3.3 (a) Optical parameters of a ball lens. The simulation results show that parallel light rays propagating through a 75 | |
dc.language.iso | en | |
dc.title | 整合微光學元件的微流體系統用於細胞分析之開發 | zh_TW |
dc.title | Development of microoptics integrated microfluidic system
for cell analysis | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-2 | |
dc.description.degree | 博士 | |
dc.contributor.coadvisor | 邱培鈺(Pei-Yu Chiou) | |
dc.contributor.oralexamcommittee | 吳光鐘(Kuang-Chong Wu),饒達仁(Da-Jeng Yao),施文彬(Wen-Pin Shih),陳林祈(Lin-Chi Chen),黃榮山(Long-Sun Huang) | |
dc.subject.keyword | 高效能,高靈敏度,三維微流道,微透鏡陣列,微流流式細胞儀, | zh_TW |
dc.subject.keyword | High throughput,High sensitivity,3D microfluidics,Microlens array,Microflow cytometer, | en |
dc.relation.page | 75 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2014-08-11 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 3.72 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。