請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52269完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 康敦彥(Dun-Yen Kang) | |
| dc.contributor.author | Tung-ping Wang | en |
| dc.contributor.author | 王惇平 | zh_TW |
| dc.date.accessioned | 2021-06-15T16:10:40Z | - |
| dc.date.available | 2015-08-25 | |
| dc.date.copyright | 2015-08-25 | |
| dc.date.issued | 2015 | |
| dc.date.submitted | 2015-08-18 | |
| dc.identifier.citation | [1] NadineSchmeling,RomanKonietzny,DanielSieffert,PatrickRolling,andClaudia Staudt. Functionalized copolyimide membranes for the separation of gaseous and liquid mixtures. Beilstein Journal of Organic Chemistry, 6(1):789–800, 2010.
[2] Water resources agency, ministry of economic affairs, taiwan: Present seawater desalination plants in taiwan. [3] RichardWBaker.MembraneTechnologyandApplications.JohnWileyamp;Sons, Ltd, Chichester, UK, 2012. [4] http://store.tischinternational.com/10407970.html. [5] Lloyd M Robeson. Correlation of separation factor versus permeability for poly- meric membranes. Journal of Membrane Science, 62(2):165–185, 1991. [6] Lloyd M Robeson. The upper bound revisited. Journal of Membrane Science, 320(1-2):390–400, 2008. [7] Lan Ying Jiang, Tai-Shung Chung, Chun Cao, Zhen Huang, and Santi Kul- prathipanja. Fundamental understanding of nano-sized zeolite distribution in the formation of the mixed matrix single- and dual-layer asymmetric hollow fiber mem- branes. Journal of Membrane Science, 252(1-2):89–100, 2005. [8] M A Aroon, A F Ismail, T Matsuura, and M M Montazer-Rahmati. Performance studies of mixed matrix membranes for gas separation: A review. Separation and Purification Technology, 75(3):229–242, 2010. [9] Yunyang Liu, Zhenfu Ng, Easir A Khan, Hae-Kwon Jeong, Chi-bun Ching, and Zhiping Lai. Synthesis of continuous mof-5 membranes on porous α-alumina sub- strates. Microporous and Mesoporous Materials, 118(1-3):296–301, 2009. [10] S A Hashemifard, A F Ismail, and T Matsuura. Prediction of gas permeability in mixed matrix membranes using theoretical models. Journal of Membrane Science, 347(1-2):53–61, 2010. [11] Dun-Yen Kang, Christopher W Jones, and Sankar Nair. Modeling molecular trans- port in composite membranes with tubular fillers. Journal of Membrane Science, 381(1-2):50–63, 2011. [12] J C Maxwell. A Treatise on Electricity and Magnetism, Vol. 3. Dover Publications, New York, 1954. [13] B J Hinds. Aligned multiwalled carbon nanotube membranes. Science, 303(5654): 62–65, 2004. [14] Ningning GAO, Sujuan XIE, Shenglin LIU, Kefeng LIU, Xiujie LI, and Longya XU. Vapor-phase silylation of mcm-22 zeolite with various sio2/al2o3 molar ra- tios. CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION), 34(3):612–619, 2013. [15] William E Dubbin and Tee Boon Goh. Electron microscope observations of chromium hydroxide-induced montmorillonite microclusters. Clays and Clay Min- erals, 43:131–134, 1995. [16] Wun-gwiKim,JongSukLee,DavidGBucknall,WilliamJKoros,andSankarNair. Nanoporous layered silicate amh-3/cellulose acetate nanocomposite membranes for gas separations. Journal of Membrane Science, 441(C):129–136, 2013. [17] Wun-gwi Kim and Sankar Nair. Membranes from nanoporous 1d and 2d materials: A review of opportunities, developments, and challenges. Chemical Engineering Science, 104(C):908–924, 2013. [18] Norman N Li and Joseph M Carlo. Separation and Purification Technology. CRC Press, 1 edition, 1992. [19] Marcel Mulder. Basic Principles of Membrane Technology. Springer Netherlands, Dordrecht, 1996. [20] Richard D Noble and S Alexander Stern. Membrane Science and Technology: Membrane Separations Technology- Principles and Applications, volume 2. EL- SEVIER, 1995. [21] Mathias Ulbricht. Advanced functional polymer membranes. 47(7):2217–2262, 2006. [22] Dun-Yen Kang, Ji Zang, Christopher W Jones, and Sankar Nair. Single-walled aluminosilicate nanotubes with organic-modified interiors. The Journal of Physical Chemistry C, 115(15):7676–7685, 2011. [23] Sangil Kim, Liang Chen, J Karl Johnson, and Eva Marand. Polysulfone and func- tionalized carbon nanotube mixed matrix membranes for gas separation: Theory and experiment. Journal of Membrane Science, 294(1-2):147–158, 2007. [24] Sangil Kim, Joerg R Jinschek, Haibin Chen, David S Sholl, and Eva Marand. Scal- able fabrication of carbon nanotube/polymer nanocomposite membranes for high flux gas transport. Nano Letters, 7(9):2806–2811, 2007. [25] V Popov. Carbon nanotubes: properties and application. Materials Science and Engineering: R: Reports, 43(3):61–102, 2004. [26] D S Sholl. Making high-flux membranes with carbon nanotubes. Science, 312(5776):1003–1004, 2006. [27] Henk Verweij, Melissa C Schillo, and Ju Li. Fast mass transport through carbon nanotube membranes. Small, 3(12):1996–2004, 2007. [28] M Whitby and N Quirke. Fluid flow in carbon nanotubes and nanopipes. Nature Nanotechnology, 2(2):87–94, 2007. [29] Guangxi Dong, Hongyu Li, and Vicki Chen. Challenges and opportunities for mixed-matrix membranes for gas separation. Journal of Materials Chemistry A, 1(15):4610–4630, 2013. [30] AAGusevandOGuseva.Rapidmasstransportinmixedmatrixnanotube/polymer membranes. Advanced Materials, 19(18):2672–2676, 2007. [31] A F Ismail, P S Goh, S M Sanip, and M Aziz. Transport and separation prop- erties of carbon nanotube-mixed matrix membrane. Separation and Purification Technology, 70(1):12–26, 2009. [32] Mainak Majumder, Nitin Chopra, and Bruce J Hinds. Mass transport through car- bon nanotube membranes in three different regimes: Ionic diffusion and gas and liquid flow. ACS Nano, 5(5):3867–3877, 2011. [33] Mainak Majumder, Xin Zhan, Rodney Andrews, and Bruce J Hinds. Voltage gated carbon nanotube membranes. Langmuir, 23(16):8624–8631, 2007. [34] Miao Yu, Hans H Funke, John L Falconer, and Richard D Noble. High density, vertically-aligned carbon nanotube membranes. Nano Letters, 9(1):225–229, 2009. [35] TravisCBowen,RichardDNoble,andJohnLFalconer.Fundamentalsandapplica- tions of pervaporation through zeolite membranes. Journal of Membrane Science, 245(1):1–33, 2004. [36] Lan Ying Jiang, Tai-Shung Chung, and Santi Kulprathipanja. Fabrication of mixed matrix hollow fibers with intimate polymer–zeolite interface for gas separation. AIChE Journal, 52(8):2898–2908, 2006. [37] Rajiv Mahajan and William J Koros. Factors controlling successful formation of mixed-matrix gas separation materials. Industrial amp; Engineering Chemistry Research, 39(8):2692–2696, 2000. [38] RajivMahajanandWilliamJKoros.Mixedmatrixmembranematerialswithglassy polymers. part 1. Polymer Engineering amp; Science, 42(7):1420–1431, 2004. [39] RajivMahajanandWilliamJKoros.Mixedmatrixmembranematerialswithglassy polymers. part 2. Polymer Engineering amp; Science, 42(7):1432–1441, 2004. [40] Richard D Noble and S Alexander Stern. Membrane separations technology: prin- ciples and applications, volume 2. Elsevier, 1995. [41] Yi Li, Tai-Shung Chung, and Santi Kulprathipanja. Novel ag +-zeolite/ polymer mixed matrix membranes with a high co2/ch4 selectivity. AIChE Journal, 53(3): 610–616, 2007. [42] Tai-Shung Chung, Lan Ying Jiang, Yi Li, and Santi Kulprathipanja. Mixed matrix membranes (mmms) comprising organic polymers with dispersed inorganic fillers for gas separation. Progress in Polymer Science, 32(4):483–507, 2007. [43] Hoang Vinh-Thang and Serge Kaliaguine. Predictive models for mixed-matrix membrane performance: A review. Chemical Reviews, 113(7):4980–5028, 2013. [44] William J Koros. Evolving beyond the thermal age of separation processes: Mem- branes can lead the way. AIChE Journal, 50(10):2326–2334, 2004. [45] Yawen Huang, Peng Zhang, Jianwei Fu, Yubo Zhou, Xiaobin Huang, and Xi- aozhen Tang. Pervaporation of ethanol aqueous solution by polydimethylsiloxane/ polyphosphazene nanotube nanocomposite membranes. Journal of Membrane Sci- ence, 339(1-2):85–92, 2009. [46] Q Liu, R D Noble, John L Falconer, and H H Funke. Organics/water separation by pervaporation with a zeolite membrane. Journal of Membrane Science, 117(1): 163–174, 1996. [47] Sainan Liu, Gongping Liu, Xuhong Zhao, and Wanqin Jin. Hydrophobic-zif-71 filled peba mixed matrix membranes for recovery of biobutanol via pervaporation. Journal of Membrane Science, 446(C):181–188, 2013. [48] Muhammad Mujiburohman, Khaled A Mahdi, and Ali Elkamel. Predictive model of pervaporation performance based on physicochemical properties of permeanta? “membrane material and process conditions. Journal of Membrane Science, 381(1- 2):1–9, 2011. [49] Vishwas Pangarkar and Sangita Pal. Pervaporation, pages 107–138. CRC Press, 2009. doi:10.1201/9781420009484.ch5. [50] Fubing Peng, Changlai Hu, and Zhongyi Jiang. Novel ploy(vinyl alcohol)/carbon nanotube hybrid membranes for pervaporation separation of benzene/cyclohexane mixtures. Journal of Membrane Science, 297(1-2):236–242, 2007. [51] Fubing Peng, Fusheng Pan, Honglei Sun, Lianyu Lu, and Zhongyi Jiang. Novel nanocomposite pervaporation membranes composed of poly(vinyl alcohol) and chitosan-wrapped carbon nanotube. Journal of Membrane Science, 300(1-2):13– 19, 2007. [52] David L Nelson and Michael M Cox. Lehninger Principles of Biochemistry. W. H. Freeman, 5 edition, 2008. [53] Dun-Yen Kang. SINGLE-WALLED METAL OXIDE NANOTUBES AND NAN- OTUBE MEMBRANES FOR MOLECULAR SEPARATIONS. Thesis, 2012. [54] Dun-Yen Kang. Inorganic nanotube-polymer composites for novel separation plat- forms. Applied Mechanics and Materials, 575:191–194, 2014. [55] Dun-YenKang,NicholasABrunelli,GIpekYucelen,AnandramVenkatasubrama- nian, Ji Zang, Johannes Leisen, Peter J Hesketh, Christopher W Jones, and Sankar Nair. Direct synthesis of single-walled aminoaluminosilicate nanotubes with en- hanced molecular adsorption selectivity. Nature Communications, 5:1–9, 2014. [56] Dun-YenKang,MeganELydon,GIpekYucelen,ChristopherWJones,andSankar Nair. Solution-processed ultrathin aluminosilicate nanotube-poly(vinyl alcohol) composite membranes with partial alignment of nanotubes. ChemNanoMat, 1(2): 102–108, 2015. [57] Dun-Yen Kang, Ho Ming Tong, Ji Zang, Rudra Prosad Choudhury, David S Sholl, Haskell W Beckham, Christopher W Jones, and Sankar Nair. Single-walled alumi- nosilicate nanotube/poly(vinyl alcohol) nanocomposite membranes. ACS Applied Materials amp; Interfaces, 4(2):965–976, 2012. [58] Dun-Yen Kang, Ji Zang, Elizabeth R Wright, Arthur L McCanna, Christopher W Jones, and Sankar Nair. Dehydration, dehydroxylation, and rehydroxylation of single-walled aluminosilicate nanotubes. ACS Nano, 4(8):4897–4907, 2010. [59] Yasutaka Kuwahara, Dun-Yen Kang, John R Copeland, Praveen Bollini, Carsten Sievers, Takashi Kamegawa, Hiromi Yamashita, and Christopher W Jones. Enhanced co2 adsorption over polymeric amines supported on heteroatom- incorporated sba-15 silica: Impact of heteroatom type and loading on sorbent struc- ture and adsorption performance. Chemistry - A European Journal, 18(52):16649– 16664, 2012. [60] Yasutaka Kuwahara, Dun-Yen Kang, John R Copeland, Nicholas A Brunelli, Stephanie A Didas, Praveen Bollini, Carsten Sievers, Takashi Kamegawa, Hiromi Yamashita, and Christopher W Jones. Dramatic enhancement of co2 uptake by poly(ethyleneimine) using zirconosilicate supports. Journal of the American Chem- ical Society, 134(26):10757–10760, 2012. [61] G Ipek Yucelen, Dun-Yen Kang, Ricardo C Guerrero-Ferreira, Elizabeth R Wright, Haskell W Beckham, and Sankar Nair. Shaping single-walled metal oxide nan- otubes from precursors of controlled curvature. Nano Letters, 12(2):827–832, 2012. [62] GIpekYucelen,Dun-YenKang,IngeborgSchmidt-Krey,HaskellWBeckham,and Sankar Nair. A generalized kinetic model for the formation and growth of single- walled metal oxide nanotubes. Chemical Engineering Science, 90(C):200–212, 2013. [63] Mashallah Rezakazemi, Abtin Ebadi Amooghin, Mohammad Mehdi Montazer- Rahmati, Ahmad Fauzi Ismail, and Takeshi Matsuura. State-of-the-art membrane based co2 separation using mixed matrix membranes (mmms): An overview on current status and future directions. Progress in Polymer Science, 39(5):817–861, 2014. [64] SAStern.The“barrer”permeabilityunit.JournalofPolymerSciencePartA-2: Polymer Physics, 6(11):1933–1934, 1968. [65] Tung-ping Wang and Dun-Yen Kang. Predictions of effective diffusivity of mixed matrix membranes with tubular fillers. Journal of Membrane Science, 485(C):123– 131, 2015. [66] K Scott. Handbook of Industrial Membranes. Elsevier Advanced Technology, 1 edition, January 1996. [67] O Bakhtiari and N Sadeghi. The formed voids around the filler particles impact on the mixed matrix membranes’gas permeabilities. International Journal of Chemical Engineering and Applications, 5(2):198–203, 2014. [68] Dariush Bastani, Nazila Esmaeili, and Mahdieh Asadollahi. Polymeric mixed ma- trix membranes containing zeolites as a filler for gas separation applications: A review. Journal of Industrial and Engineering Chemistry, 19(2):375–393, 2013. [69] P Bernardo, E Drioli, and G Golemme. Membrane gas separation: A review/state of the art. Industrial amp; Engineering Chemistry Research, 48(10):4638–4663, 2009. [70] PSGoh,AFIsmail,SMSanip,BCNg,andMAziz.Recentadvancesofinorganic fillers in mixed matrix membrane for gas separation. Separation and Purification Technology, 81(3):243–264, 2011. [71] Madhava R. Kosuri. Polymeric Membranes for Super Critical Carbon Dioxide (scCO2) Separations. Thesis, 2009. [72] R Nasir, H Mukhtar, Z Man, and D F Mohshim. Material advancements in fabrica- tion of mixed-matrix membranes. Chemical Engineering amp; Technology, 36(5): 717–727, 2013. [73] D R Paul and D R Kemp. The diffusion time lag in polymer membranes containing adsorptive fillers. Journal of Polymer Science: Polymer Symposia, 41(1):79–93, 2007. First MMMs. [74] Beatriz Zornoza, Carlos Tellez, Joaquin Coronas, Jorge Gascon, and Freek Kapteijn. Metal organic framework based mixed matrix membranes: An increas- ingly important field of research with a large application potential. Microporous and Mesoporous Materials, 166(C):67–78, 2013. [75] Mark E Davis. Ordered porous materials for emerging applications. Nature, 417(6891):813–821, 2002. [76] C R Martin. Nanomaterials: A membrane-based synthetic approach. Science, 266(5193):1961–1966, 1994. [77] Woo Lee, Ran Ji, Ulrich Gosele, and Kornelius Nielsch. Fast fabrication of long- range ordered porous alumina membranes by hard anodization. Nature Materials, 5(9):741–747, 2006. [78] H Masuda and K Fukuda. Ordered metal nanohole arrays made by a two-step repli- cation of honeycomb structures of anodic alumina. Science, 268(5216):1466–1468, 1995. [79] K F Yee, K T Lee, A Z Abdullah, and J C S Wu. An alternative route for the prepa- ration of sulfated zirconia loaded on alumina (sza) for biodiesel production: An optimization study. Energy Sources, Part A: Recovery, Utilization, and Environ- mental Effects, 35(14):1296–1305, 2013. [80] Cheryl W Jones and William J Koros. Carbon molecular sieve gas separation membranes-i. preparation and characterization based on polyimide precursors. Car- bon, 32(8):1419–1425, 1994. [81] S M Saufi and A F Ismail. Fabrication of carbon membranes for gas separation––a review. Carbon, 42(2):241–259, 2004. [82] De Q Vu, William J Koros, and Stephen J Miller. High pressure co2/ch4 separation using carbon molecular sieve hollow fiber membranes. Industrial amp; Engineer- ing Chemistry Research, 41(3):367–380, 2002. [83] Mohammad Askari and Tai-Shung Chung. Natural gas purification and olefin/ paraffin separation using thermal cross-linkable co-polyimide/zif-8 mixed matrix membranes. Journal of Membrane Science, 444(c):173–183, 2013. [84] Andrew J Brown, J R Johnson, Megan E Lydon, William J Koros, Christo- pher W Jones, and Sankar Nair. Continuous polycrystalline zeolitic imidazolate framework-90 membranes on polymeric hollow fibers. Angewandte Chemie Inter- national Edition, 51(42):10615–10618, 2012. [85] Lin Hao, Pei Li, Tingxu Yang, and Tai-Shung Chung. Room temperature ionic liq- uid/zif-8 mixed-matrix membranes for natural gas sweetening and post-combustion co2 capture. Journal of Membrane Science, 436(C):221–231, 2013. [86] Lunxi Li, Jianfeng Yao, Rizhi Chen, Li He, Kun Wang, and Huanting Wang. Infil- tration of precursors into a porous alumina support for zif-8 membrane synthesis. Microporous and Mesoporous Materials, 168(C):15–18, 2013. [87] Tao Li, Yichang Pan, Klaus-Viktor Peinemann, and Zhiping Lai. Carbon dioxide selective mixed matrix composite membrane containing zif-7 nano-fillers. Journal of Membrane Science, 425-426(c):235–242, 2013. [88] Jiangpu Nan, Xueliang DONG, Wenjin Wang, and Wanqin Jin. Formation mech- anism of metal–organic framework membranes derived from reactive seeding ap- proach. Microporous and Mesoporous Materials, 155(C):90–98, 2012. [89] Jiangpu Nan, Xueliang DONG, Wenjin Wang, Wanqin Jin, and Nanping Xu. Step- by-step seeding procedure for preparing hkust-1 membrane on porous α-alumina support. Langmuir, 27(8):4309–4312, 2011. [90] Yichang Pan, Bo Wang, and Zhiping Lai. Synthesis of ceramic hollow fiber sup- ported zeolitic imidazolate framework-8 (zif-8) membranes with high hydrogen permeability. Journal of Membrane Science, 421-422(c):292–298, 2012. [91] Joshua A Thompson, Catherine R Blad, Nicholas A Brunelli, Megan E Lydon, Ryan P Lively, Christopher W Jones, and Sankar Nair. Hybrid zeolitic imida- zolate frameworks: Controlling framework porosity and functionality by mixed- linker synthesis. Chemistry of Materials, 24(10):1930–1936, 2012. [92] Tingxu Yang and Tai-Shung Chung. Room-temperature synthesis of zif-90 nanocrystals and the derived nano-composite membranes for hydrogen separation. Journal of Materials Chemistry A, 1(19):6081, 2013. [93] Bin Zheng, Yichang Pan, Zhiping Lai, and Kuo-Wei Huang. Molecular dynam- ics simulations on gate opening in zif-8: Identification of factors for ethane and propane separation. Langmuir, 29(28):8865–8872, 2013. [94] L D Pollo, L T Duarte, M Anacleto, A C Habert, and C P Borges. Polymeric mem- branes containing silver salts for propylene/propane separation. Brazilian Journal of Chemical Engineering, 29(2):307–314, 2012. [95] Ramesh R Bhave. Inorganic Membranes Synthesis, Characteristics and Applica- tions. Springer Netherlands, Dordrecht, 1991. [96] D A G Bruggeman. Berechnung verschiedener physikalischer konstanten von het- erogenen substanzen. i. dielektrizitatskonstanten und leitfahigkeiten der mischkor- per aus isotropen substanzen. Annalen der Physik, 416(7):636–664, 1935. Brugge- man Model. [97] JCvanVessemandJMBijvoet.Thedielectricconstantmeasurementofpowdered regular crystalline solids. Recueil des Travaux Chimiques des Pays-Bas, 67(3):191– 196, 2010. Bottcher Model. [98] W I Higuchi and Takeru Higuchi. Theoretical analysis of diffusional movement through heterogeneous barriers. Journal of the American Pharmaceutical Associ- ation, 49(9):598–606, 1960. Higuchi model. [99] R L Hamilton and O K Crosser. Thermal conductivity of heterogeneous two- component systems. Industrial amp; Engineering Chemistry Fundamentals, 1(3): 187–191, 1962. Hamilton–Crosser Model. [100] Xiang-Qi Wang and Arun S Mujumdar. Heat transfer characteristics of nanofluids: a review. International Journal of Thermal Sciences, 46(1):1–19, 2007. Hamilton– Crosser model. [101] Dynamic mechanical properties. pages 1–23, 2002. [102] R H B Bouma, A Checchetti, G Chidichimo, and E Drioli. Permeation through a heterogeneous membrane: the effect of the dispersed phase. Journal of Membrane Science, 128(2):141–149, 1997. Looyenga Model. [103] Rajinder Pal. Permeation models for mixed matrix membranes. Journal of Colloid and Interface Science, 317(1):191–198, 2008. Pal Model. [104] E GONZO, M PARENTIS, and J GOTTIFREDI. Estimating models for predicting effective permeability of mixed matrix membranes. Journal of Membrane Science, 277(1-2):46–54, 2006. GPG Model. [105] Caleb V Funk and Douglas R Lloyd. Zeolite-filled microporous mixed matrix (zeotips) membranes: Prediction of gas separation performance. Journal of Mem- brane Science, 313(1-2):224–231, 2008. Funk−Lloyd Model. [106] ELCussler.Membranescontainingselectiveflakes.JournalofMembraneScience, 52(3):275–288, 1990. Cussler Model. [107] E L Cussler, Stephanie E Hughes, William J Ward III, and Rutherford Aris. Barrier membranes. Journal of Membrane Science, 38(2):161–174, 1988. Cussler Model. [108] J K Holt. Fast mass transport through sub-2-nanometer carbon nanotubes. Science, 312(5776):1034–1037, 2006. [109] Sumio Iijima. Helical microtubules of graphitic carbon. Nature, 354(6348):56–58, 1991. First CNT by NEC Sumio Iijimahttp://www.nec.com/en/global/rd/innova- tive/cnt/top.html. [110] Garry Nathaniel B Barona, Mijin Choi, and Bumsuk Jung. High permeate flux of pva/psf thin film composite nanofiltration membrane with aluminosilicate single- walled nanotubes. Journal of Colloid and Interface Science, 386(1):189–197, 2012. [111] Ben Li, Dan Xu, Xiongfei Zhang, Zhongyi Jiang, Yu Wang, Jing Ma, Xiao Dong, and Hong Wu. Rubbery polymer−inorganic nanocomposite membranes: Free vol- ume characteristics on separation property. Industrial amp; Engineering Chemistry Research, 49(24):12444–12451, 2010. [112] Y H Teow, B S Ooi, A L Ahmad, and J K Lim. Mixed-matrix membrane for humic acid removal: Influence of different types of tio2 on membrane morphology and performance. International Journal of Chemical Engineering and Applications, pages 374–379, 2012. [113] Ludovic Dumee, Leonora Velleman, Kallista Sears, Matthew Hill, Jurg Schutz, Niall Finn, Mikel Duke, and Stephen Gray. Control of porosity and pore size of metal reinforced carbon nanotube membranes. Membranes, 1(1):25–36, 2011. [114] Yun Hang Hu and Eli Ruckenstein. Pore size distribution of single-walled car- bon nanotubes. Industrial amp; Engineering Chemistry Research, 43(3):708–711, 2004. [115] Ji-Young Kim, Kwang Heon Kim, and Kwang Bum Kim. Fabrication and elec- trochemical properties of carbon nanotube/polypyrrole composite film electrodes with controlled pore size. Journal of Power Sources, 176(1):396–402, 2008. [116] PiotrKowalczyk,RobertHołyst,HidekiTanaka,andKatsumiKaneko.Distribution of carbon nanotube sizes from adsorption measurements and computer simulation. The Journal of Physical Chemistry B, 109(30):14659–14666, 2005. [117] M Elimelech and W A Phillip. The future of seawater desalination: Energy, tech- nology, and the environment. Science, 333(6043):712–717, 2011. [118] Ji Zang, Shaji Chempath, Suchitra Konduri, Sankar Nair, and David S Sholl. Flexi- bility of ordered surface hydroxyls influences the adsorption of molecules in single- walled aluminosilicate nanotubes. The Journal of Physical Chemistry Letters, 1(8): 1235–1240, 2010. [119] Ji Zang, Suchitra Konduri, Sankar Nair, and David S Sholl. Self-diffusion of water and simple alcohols in single-walled aluminosilicate nanotubes. ACS Nano, 3(6): 1548–1556, 2009. [120] Urbano Diaz and Avelino Corma. Layered zeolitic materials: an approach to de- signing versatile functional solids. Dalton Transactions, 43(27):10292–25, 2014. [121] QishengHuo,DavidIMargolese,andGalenDStucky.Surfactantcontrolofphases in the synthesis of mesoporous silica-based materials. Chemistry of Materials, 8(5): 1147–1160, 1996. [122] WieslawJRoth,PetrNachtigall,RussellEMorris,andJiřiČejka.Two-dimensional zeolites: Current status and perspectives. Chemical Reviews, 114(9):4807–4837, 2014. [123] K S Novoselov. Electric field effect in atomically thin carbon films. Science, 306(5696):666–669, 2004. [124] Sasha Stankovich, Dmitriy A Dikin, Geoffrey H B Dommett, Kevin M Kohlhaas, Eric J Zimney, Eric A Stach, Richard D Piner, SonBinh T Nguyen, and Rodney S Ruoff. Graphene-based composite materials. Nature, 442(7100):282–286, 2006. [125] MichaelAlexandreandPhilippeDubois.Polymer-layeredsilicatenanocomposites: preparation, properties and uses of a new class of materials. Materials Science and Engineering: R: Reports, 28(1-2):1–63, 2000. [126] Suprakas Sinha Ray and Masami Okamoto. Polymer/layered silicate nanocompos- ites: a review from preparation to processing. Progress in Polymer Science, 28(11): 1539–1641, 2003. [127] KimoonKim,JungSooSeo,DongmokWhang,HyoyoungLee,SungImJun,Jinho Oh, and Young Jin Jeon. A homochiral metal organic porousmaterial for enantios- electiveseparation and catalysis. Nature, 404(6781):982–986, 2000. [128] Santi Kulprathipanja. Zeolites in Industrial Separation and Catalysis. Wiley-VCH Verlag GmbH amp; Co. KGaA, Weinheim, Germany, 2010. [129] Qi Liu, Ze-Xian Low, Yi Feng, Sookwan Leong, Zhaoxiang Zhong, Jianfeng Yao, Karen Hapgood, and Huanting Wang. Direct conversion of two-dimensional zif- l film to porous zno nano-sheet film and its performance as photoanode in dye- sensitized solar cell. Microporous and Mesoporous Materials, 194(C):1–7, 2014. [130] Ze-XianLow,AmirRazmjou,KunWang,StephenGray,MikelDuke,andHuanting Wang. Effect of addition of two-dimensional zif-l nanoflakes on the properties of polyethersulfone ultrafiltration membrane. Journal of Membrane Science, 460(c): 9–17, 2014. [131] Ze-Xian Low, Jianfeng Yao, Qi Liu, Ming He, Zhouyou Wang, Akkihebbal K Suresh, Jayesh Bellare, and Huanting Wang. Crystal transformation in zeolitic- imidazolate framework. Crystal Growth amp; Design, 14(12):6589–6598, 2014. [132] Zhaoxiang Zhong, Jianfeng Yao, Rizhi Chen, Zexian Low, Ming He, Jeffer- son Zhe Liu, and Huanting Wang. Oriented two-dimensional zeolitic imidazolate framework-l membranes and their gas permeation properties. Journal of Materials Chemistry A: Materials for energy and sustainability, 00:1–8, 2015. [133] Zhaoxiang Zhong, Jianfeng Yao, Ze-Xian Low, Rizhi Chen, Ming He, and Huant- ing Wang. Carbon composite membrane derived from a two-dimensional zeolitic imidazolate framework and its gas separation properties. Carbon, 72(C):242–249, 2014. [134] Juergen Caro and Manfred Noack. Zeolite membranes – recent developments and progress. Microporous and Mesoporous Materials, 115(3):215–233, 2008. [135] Maryam Moaddeb and William J Koros. Gas transport properties of thin polymeric membranes in the presence of silicon dioxide particles. Journal of Membrane Sci- ence, 125(1):143–163, 1997. [136] MPPina,RMallada,MArruebo,MUrbiztondo,NNavascues,OdelaIglesia,and J Santamaria. Zeolite films and membranes. emerging applications. Microporous and Mesoporous Materials, 144(1-3):19–27, 2011. [137] Mark A Snyder and Michael Tsapatsis. Hierarchical nanomanufacturing: From shaped zeolite nanoparticles to high-performance separation membranes. Ange- wandte Chemie International Edition, 46(40):7560–7573, 2007. [138] Olga Guseva and Andrei A Gusev. Finite element assessment of the potential of platelet-filled polymers for membrane gas separations. Journal of Membrane Sci- ence, 325(1):125–129, 2008. [139] Matteo Minelli, Marco Giacinti Baschetti, and Ferruccio Doghieri. A comprehen- sive model for mass transport properties in nanocomposites. Journal of Membrane Science, 381(1-2):10–20, 2011. [140] AGreco.Numericalsimulationandmathematicalmodelingof2dmulti-scalediffu- sion in lamellar nanocomposite. Computational Materials Science, 90(C):203–209, 2014. [141] A Greco. Simulation and modeling of diffusion in oriented lamellar nanocompos- ites. Computational Materials Science, 83(C):164–170, 2014. [142] A Greco and A Maffezzoli. Two-dimensional and three-dimensional simulation of diffusion in nanocomposite with arbitrarily oriented lamellae. Journal of Membrane Science, 442(C):238–244, 2013. [143] AKZulhairun,AFIsmail,TMatsuura,MSAbdullah,andAMustafa.Asymmetric mixed matrix membrane incorporating organically modified clay particle for gas separation. Chemical Engineering Journal, 241(C):495–503, 2014. [144] Tanya Singh, Dun-Yen Kang, and Sankar Nair. Rigorous calculations of perme- ation in mixed-matrix membranes: Evaluation of interfacial equilibrium effects and permeability-based models. Journal of Membrane Science, 448(C):160–169, 2013. [145] Li Sun and Richard M Crooks. Single carbon nanotube membranes: a well-defined model for studying mass transport through nanoporous materials. Journal of the American Chemical Society, 122(49):12340–12345, 2000. [146] Popuri Srinivasa Rao, Ming-Yen Wey, Hui-Hsin Tseng, Itta Arun Kumar, and Tzu- Hsiang Weng. A comparison of carbon/nanotube molecular sieve membranes with polymer blend carbon molecular sieve membranes for the gas permeation applica- tion. Microporous and Mesoporous Materials, 113(1-3):499–510, 2008. [147] Lei Ge, Li Wang, Aijun Du, Meng Hou, Victor Rudolph, and Zhonghua Zhu. Vertically-aligned carbon nanotube membranes for hydrogen separation. RSC Ad- vances, 2(12):5329, 2012. [148] Rita Smajda, Akos Kukovecz, Zoltan Konya, and Imre Kiricsi. Structure and gas permeability of multi-wall carbon nanotube buckypapers. Carbon, 45(6):1176– 1184, 2007. [149] Bin Wu, Xuewa Li, De An, Shixiong Zhao, and Yuxin Wang. Electro-casting aligned mwcnts/polystyrene composite membranes for enhanced gas separation performance. Journal of Membrane Science, 462(C):62–68, 2014. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52269 | - |
| dc.description.abstract | 複合薄膜兼具有傳統高分子薄膜之低製備成本的優點,其中添加之 填充物具有高選擇性或高透過率的特色,為一有大規模運用之發展潛 力的分離薄膜。就填充物之外型分類,可概括分類為球狀、管狀(一 維)或層狀(二維)。管狀填充物如碳奈米管及金屬氧化物奈米管,其 細長且管壁無法允許分子通透之特性,具有發展為分子篩填充物之潛 力。層狀填充物如層狀沸石或粘土礦物,其厚度薄而大面積之特性, 一般認為可以改變分子透過時之質量傳遞長度,藉此提昇分離時之 選擇性。一般用以計算複合薄膜之有效擴散係數及有效透過率之方程 式為 Maxwell 模型,此為一做廣泛應用於計算有效擴散係數之解析方 程式,此模型將球形填充物分散於基材中之行為類比做電阻串聯或並 聯所推導而出。透過相同之推導邏輯,而後發展出針對管狀填充物之 KJN 模型以及層狀填充物之 Cussler 模型。然而,無論是 Maxwell 模 型、KJN 模型或是 Cussler 模型,解析方程式無法徹底考慮真實管狀或 層狀填充物分散於基材中之行為,因此在模型的預測中往往造成偏差。
本研究使用有限元素分析法進行數值計算,首先建立仿真之三維 模型,並於其中添加管狀或層狀填充物,並調控其佔基材之不同體積 分率,透過 COMSOL MultiphysicsR 軟體進行質傳計算求得濃度分佈, 透過 Fick’s 擴散方程式的推導,進而得到包含更多資訊之數值方程式。 對於管狀填充物而言,本研究進行了長寬比值、擴散係數比值、空間 分布及填充物旋轉方向的探討。研究結果指出,提昇擴散係數比值可 以有效的提升有效擴散係數,且其效應遠大於提昇長寬比值的提升幅 度;而改變空間分布之效應非常顯著,倘若所有填充物延著垂直於擴 散之方向增加比重,其提昇可以遠大於平行於擴散方向之增加比重的 結果。旋轉方向效應亦指出,管壁垂直於擴散方向將不利於有效擴散 係數,且會大幅降低有效擴散係數。本研究亦進行了具有隨機分佈旋 轉方向填充物的效應,其結果指出,填充物的長寬比值效應並部顯著, 但擴散係數比值效應將會大幅改變有效擴散係數。對於層狀填充物 而言,本研究進行了擴散係數比值以及非等向性擴散的效應。研究結 果指出,具有非等向性擴散的填充物對整體有效擴散係數有顯著的影 響。為了驗證本研究中預測模型的正確性,吾人與文獻中若干透過實 驗所量測得之薄膜有效擴散係數,與本研究之模型及 Maxwell、KJN、 Cussler 模型做比較,其結果指出,本研究所預測之模型與其他解析方 程式有較好的準確性。 | zh_TW |
| dc.description.abstract | This article presents a series of calculation of the effective diffusivity from the detailed mass transfer modeling of mixed matrix membranes with non-spherical (tubular and layered) fillers. We construct the filler-and-matrix models mimicking the realistic mixed matrix membranes, and perform the mass transfer simulations. A number of mixed matrix membranes' parameters, including filler to matrix volume ratio, aspect ratio of fillers, filler to membrane's relative diffusivity, and filler's orientation are considered in our simulations. Our results show that tubular fillers' alignment is critical to the effective diffusivity. The aspect ratio of tubular fillers only shows marginal effect on the effective diffusivity. Our results also suggest that the increase of aspect ratio and the intrinsic diffusivity of tubular filler will cause the increase of the overall effective diffusivity. For layered fillers, the effective diffusivity is influenced by the isotropy of the layered fillers caused by the differences in the out-of-plane and in-plane diffusivity. Also, the binary species selectivity in separation of the mixed matrix membranes can be adjust by the difference of the anisotropic diffusivity of the species-filler construction. Finally, we compare our results with selected experimental results in the literature for validation the prediction of the effective diffusivity of mixed matrix membranes. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-15T16:10:40Z (GMT). No. of bitstreams: 1 ntu-104-R02524044-1.pdf: 63013099 bytes, checksum: c9438023e7d7fce1ae23393872ecbbd2 (MD5) Previous issue date: 2015 | en |
| dc.description.tableofcontents | 致謝 i
摘要 iii Abstract v Contents vii List of Figures xi List of Tables xv 1 Introduction 1 1.1 Background 1 1.2 Motivation and Objective 2 2 Literature Reviews 3 2.1 Membrane Separation and Its Application 3 2.2 Membrane Separation Theory 6 2.2.1 Membrane Separation Mechanism 6 2.2.2 Performance Evaluation of Membranes 9 2.3 Mixed Matrix Membranes and Its Fabrication 11 2.3.1 Mixed Matrix Membranes(MMMs) 11 2.3.2 Fabrication of Mixed matrix Membranes 13 2.3.3 Common Fillers for the MMMs 16 2.4 Mass Transfer Models for MMMs with Different Fillers Shape 17 2.4.1 Modeling Mass Transfer in Membranes 17 3 Method 27 2.4.2 Tubular Fillers and Mass Transfer Models for MMMs with TubularFillers 19 2.4.3 Layered Fillers and Mass Transfer Models for MMMs with LayeredFillers 22 3.1 General Concept of Modeling 27 3.2 Mixed Matrix Membranes Model Construction 30 3.2.1 Model Construction for Tubular Fillers 30 3.2.2 Model Construction for Layered Fillers 30 3.3 Modeling Mass Transfer 33 3.4 Numerical Methods and Solution Postprocessing 37 3.5 Simulations for Tubular Fillers without a Preferred Orientation 38 4 Prediction of Effective Diffusion Coefficient for Mixed Matrix Membranes with Tubular Fillers 41 4.1 Tubular Filler Spatial Distribution Effects 41 4.2 Tubular Filler Aspect Ratio Effects 43 4.3 Filler Diffusivity Ratio Effects 43 4.4 Tubular Fillers with an Orientation Normal to the Z-axis 44 4.5 Tubular Fillers without a Preferred Orientation 46 4.6 Comparisons with Existing Models 51 4.7 Comparisons with Experimental Data 51 5 Prediction of Effective Diffusion Coefficient for Mixed Matrix Membranes with Layered Fillers 57 5.1 Comparisons with Existing Models 57 5.2 Detailed Investigations of the Isotropy Effects of Layered Filler Diffusivity 58 5.3 Comparisons with Experimental Data 59 6 Conclusion 63 Nomenclature 65 Bibliography 67 Appendix A COMSOL-MATLAB LivelinkR Modeling Scripts Generator for MMMs with Tubular Fillers I Appendix B COMSOL-MATLAB LivelinkR Modeling Scripts Generator for MMMs with Layered Fillers XIII Appendix C COMSOL-MATLAB LivelinkR Modeling Scripts Generator for MMMs with Tubular Fillers with No prefer Orientation XXXI | |
| dc.language.iso | en | |
| dc.subject | 膜分離 | zh_TW |
| dc.subject | 複合薄膜 | zh_TW |
| dc.subject | 奈米管 | zh_TW |
| dc.subject | 層狀材料 | zh_TW |
| dc.subject | 有效擴散係數 | zh_TW |
| dc.subject | membrane separation | en |
| dc.subject | effective diffusivity | en |
| dc.subject | modeling | en |
| dc.subject | mixed matrix membranes (MMMs) | en |
| dc.subject | nanotube | en |
| dc.title | 含非球狀填充物的複合薄膜之有效擴散係數預測 | zh_TW |
| dc.title | Predictions of Effective Diffusion Coefficient of Mixed Matrix Membranes with Non-spherical Fillers | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 103-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 徐振哲(Cheng-Che(Jerry),謝之真(Chih-Chen Hsieh) | |
| dc.subject.keyword | 複合薄膜,奈米管,層狀材料,有效擴散係數,膜分離, | zh_TW |
| dc.subject.keyword | nanotube,membrane separation,mixed matrix membranes (MMMs),modeling,effective diffusivity, | en |
| dc.relation.page | 118 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2015-08-18 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
| 顯示於系所單位： | 化學工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-104-1.pdf 未授權公開取用 | 61.54 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。