請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/50715完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 廖英志(Ying-Chih Liao) | |
| dc.contributor.author | Chun-Yi Li | en |
| dc.contributor.author | 李俊毅 | zh_TW |
| dc.date.accessioned | 2021-06-15T12:54:12Z | - |
| dc.date.available | 2021-07-26 | |
| dc.date.copyright | 2016-07-26 | |
| dc.date.issued | 2016 | |
| dc.date.submitted | 2016-07-18 | |
| dc.identifier.citation | 參考文獻
(1) Tok, J. B. H.; Bao, Z. A. Recent advances in flexible and stretchable electronics, sensors and power sources. Sci. China-Chem. 2012, 55, 718-725. (2) Segev-Bar, M.; Haick, H. Flexible Sensors Based on Nanoparticles. ACS Nano 2013, 7, 8366-8378. (3) Kahn, N.; Lavie, O.; Paz, M.; Segev, Y.; Haick, H. Dynamic Nanoparticle-Based Flexible Sensors: Diagnosis of Ovarian Carcinoma from Exhaled Breath. Nano Lett. 2015, 15, 7023-7028. (4) Guo, C. F.; Sun, T.; Liu, Q.; Suo, Z.; Ren, Z. Highly stretchable and transparent nanomesh electrodes made by grain boundary lithography. Nat. Commun. 2014, 5, 3121. (5) Chen, S. P.; Liao, Y. C. Highly stretchable and conductive silver nanowire thin films formed by soldering nanomesh junctions. Phy. Chem. Chem. Phy. 2014, 16, 19856-19860. (6) Xu, R. Q.; Lu, Y. Q.; Jiang, C. H.; Chen, J.; Mao, P.; Gao, G. H.; Zhang, L. B.; Wu, S. Facile Fabrication of Three-Dimensional Graphene Foam/Poly(dimethylsiloxane) Composites and Their Potential Application as Strain Sensor. ACS Appl. Mat. Inter. 2014, 6, 13455-13460. (7) Gitlin, L.; Schulze, P.; Ohla, S.; Bongard, H. J.; Belder, D. Surface modification of PDMS microfluidic devices by controlled sulfuric acid treatment and the application in chip electrophoresis. Electrophoresis 2015, 36, 449-456. (8) Kersey, L.; Ebacher, V.; Bazargan, V.; Wang, R. Z.; Stoeber, B. The effect of adhesion promoter on the adhesion of PDMS to different substrate materials. Lab on a Chip 2009, 9, 1002-1004. (9) Bhattacharya, S.; Datta, A.; Berg, J. M.; Gangopadhyay, S. Studies on surface wettability of poly(dimethyl) siloxane (PDMS) and glass under oxygen-plasma treatment and correlation with bond strength. J. Microelectromech. Syst. 2005, 14, 590-597. (10) Ressia, J. A.; Villar, M. A.; Valles, E. M. Influence of polydispersity on the viscoelastic properties of linear polydimethylsiloxanes and their binary blends. Polymer 2000, 41, 6885-6894. (11) Jha, B. K.; Christiano, S. P.; Shah, D. O. Silicone antifoam performance: Correlation with spreading and surfactant monolayer packing. Langmuir 2000, 16, 9947-9954. (12) Deguchi, S.; Hotta, J.; Yokoyama, S.; Matsui, T. S. Viscoelastic and optical properties of four different PDMS polymers. J. Micromech. Microeng. 2015, 25. (13) Colombo, P.; Bernardo, E.; Biasetto, L. Novel microcellular ceramics from a silicone resin. J. Am. Ceram. Soc. 2004, 87, 152-154. (14) Seyferth, D. Dimethyldichlorosilane and the direct synthesis of methylchlorosilanes. The key to the silicones industry. Organomet.Chem 2001, 20, 4978-4992. (15) Rochow, E. G. The Direct Synthesis of Organosilicon Compounds. J. Am. Chem. Soc. 1945, 67, 963-965. (16) Zuckerman, J. J. The Direct Synthesis of Organosilicon Compounds. Adv.Inorg. Chem.1964, 6, 383-432. (17) Rochow, E. G. Dimethyldichlorosilane - Dimethylsilicon Dichloride. Inorg. Synth. 1950, 3, 56-58. (18) Dubois, P., Coulembier, O., and Raquez, J.-M., Handbook_Ring_OpeningOpening. 2009. (19) Carmicha.Jb; Heffel, J. Equilibrium Molecular Weight Distribution of Cyclic and Linear Methylsiloxanes. J.Phy.Chem. 1965, 69, 2218-2224. (20) Grubb, W. T.; Osthoff, R. C. Kinetics of the Polymerization of a Cyclic Dimethylsiloxane. J.Am. Chem. Soc.1955, 77, 1405-1411. (21) Patnode, W.; Wilcock, D. F. Methylpolysiloxanes. J.Am. Chem. Soc. 1946, 68, 358-363. (22) Gupta, S. P.; Moreau, M.; Masure, M.; Sigwalt, P. Cationic Polymerization of 1,3,5,7 Tetramethylcyclotetrasiloxane Initiated by Trifluoromethanesulfonic Acid. Eur. Polym. J. 1993, 29, 15-22. (23) Ahn, J. H.; Kim, H. S.; Lee, K. J.; Jeon, S.; Kang, S. J.; Sun, Y.; Nuzzo, R. G.; Rogers, J. A. Heterogeneous three-dimensional electronics by use of printed semiconductor nanomaterials. Science 2006, 314, 1754-1757. (24) Fuh, Y. K.; Ho, H. C. Highly flexible self-powered sensors based on printed circuit board technology for human motion detection and gesture recognition. Nanotechnology 2016, 27,095401. (25) Segev-Bar, M.; Konvalina, G.; Haick, H. High-Resolution Unpixelated Smart Patches with Antiparallel Thickness Gradients of Nanoparticles. Adv. Mat. 2015, 27, 1779-1785. (26) Wang, Y. J.; Lu, J. G.; Shieh, H. P. D. Efficiency Enhancement of Organic Light-Emitting Diodes on Flexible Substrate With Patterned Inverted Conical Structure. IEEE Photonics J. 2016, 8,1600108. (27) Ha, M.; Lim, S.; Park, J.; Um, D. S.; Lee, Y.; Ko, H. Bioinspired Interlocked and Hierarchical Design of ZnO Nanowire Arrays for Static and Dynamic Pressure-Sensitive Electronic Skins. Adv.. Funct. Mat. 2015, 25, 2841-2849. (28) Chou, N.; Kim, Y.; Kim, S. A Method to Pattern Silver Nanowires Directly on Wafer-Scale PDMS Substrate and Its Applications. ACS Appl. Mat. Inter. 2016, 8, 6269-6276. (29) Rogers, J. A.; Someya, T.; Huang, Y. G. Materials and Mechanics for Stretchable Electronics. Science 2010, 327, 1603-1607. (30) Matsuhisa, N.; Kaltenbrunner, M.; Yokota, T.; Jinno, H.; Kuribara, K.; Sekitani, T.; Someya, T. Printable elastic conductors with a high conductivity for electronic textile applications. Nat. Commun. 2015, 6,7461. (31) Zhou, J. W.; Ellis, A. V.; Voelcker, N. H. Recent developments in PDMS surface modification for microfluidic devices. Electrophoresis 2010, 31, 2-16. (32) Gomathi, N.; Mishra, I.; Varma, S.; Neogi, S. Surface modification of poly(dimethylsiloxane) through oxygen and nitrogen plasma treatment to improve its characteristics towards biomedical applications. Surf. Topogr. Metrol. Prop. 2015, 3, 035005. (33) Juárez-Moreno, J. A.; Ávila-Ortega, A.; Oliva, A. I.; Avilés, F.; Cauich-Rodríguez, J. V. Effect of wettability and surface roughness on the adhesion properties of collagen on PDMS films treated by capacitively coupled oxygen plasma. Appl. Surf. Sci. 2015, 349, 763-773. (34) Roman, G. T.; Culbertson, C. T. Surface engineering of poly(dimethylsiloxane) microfluidic devices using transition metal sol-gel chemistry. Langmuir 2006, 22, 4445-4451. (35) Kim, D. H.; Yu, K. C.; Kim, Y.; Kim, J. W. Highly Stretchable and Mechanically Stable Transparent Electrode Based on Composite of Silver Nanowires and Polyurethane-Urea. ACS Appl. Mat. Inter. 2015, 7, 15214-15222. (36) Emoto, A.; Kobayashi, T.; Noguchi, N.; Fukuda, T. Tailoring adhesive forces between poly(dimethylsiloxane) and glass substrates using poly(vinyl alcohol) primers. J.Appl. Polym. Sci. 2014, 131, 39927. (37) Chen, H. Y.; McClelland, A. A.; Chen, Z.; Lahann, J. Solventless adhesive bonding using reactive polymer coatings. Anal. Chem. 2008, 80, 4119-4124. (38) Yun, S.; Niu, X. F.; Yu, Z. B.; Hu, W. L.; Brochu, P.; Pei, Q. B. Compliant Silver Nanowire-Polymer Composite Electrodes for Bistable Large Strain Actuation. Adv. Mat. 2012, 24, 1321-1327. (39) Xu, F.; Zhu, Y. Highly Conductive and Stretchable Silver Nanowire Conductors. Adv. Mat. 2012, 24, 5117-5122. (40) Rouse, C. A. Ionization-Equilibrium Equation of State .4. Dense Plasmas and Liquid Metals. Astrophys. J. 1962, 136, 665-670. (41) Langmuir, I. Oscillations in ionized gases. Proc. Natl. Acad. Sci. U.S.A. 1928, 14, 627-637. (42) Eliasson, B.; Kogelschatz, U. Nonequilibrium Volume Plasma Chemical-Processing. IEEE Trans. Plasma Sci. 1991, 19, 1063-1077. (43) L., L. M. A. a. L. A. Principles of Plasma Discharges and Materials Processing 1994. (44) Pichot, M. Dry Processing in Microelectronics - Towards Low-Pressure Plasma Technology. Vacuum 1990, 41, 895-898. (45) Schutze, A.; Jeong, J. Y.; Babayan, S. E.; Park, J.; Selwyn, G. S.; Hicks, R. F. The atmospheric-pressure plasma jet: A review and comparison to other plasma sources. IEEE Trans. Plasma Sci. 1998, 26, 1685-1694. (46) Roth, J. R.; Nourgostar, S.; Bonds, T. A. The one atmosphere uniform glow discharge plasma (OAUGDP) - A platform technology for the 21st century. IEEE Trans. Plasma Sci. 2007, 35, 233-250. (47) Roth, J. R.; Rahel, J.; Dai, X.; Sherman, D. M. The physics and phenomenology of one atmosphere uniform glow discharge plasma (OAUGDP (TM)) reactors for surface treatment applications. J. Appl. Phys. 2005, 38, 555-567. (48) Pappas, D. Status and potential of atmospheric plasma processing of materials. J. Vac. Sci. Technol.A 2011, 29. (49) Kostov, K. G.; Honda, R. Y.; Alves, L. M. S.; Kayama, M. E. Characteristics of Dielectric Barrier Discharge Reactor for Material Treatment. Brazilian J.Phy. 2009, 39, 322-325. (50) Penetrante, B. M.; Hsiao, M. C.; Merritt, B. T.; Vogtlin, G. E.; Wallman, P. H.; Neiger, M.; Wolf, O.; Hammer, T.; Broer, S. Pulsed corona and dielectric-barrier discharge processing of NO in N-2. Appl. Phy. Lett. 1996, 68, 3719-3721. (51) Chang, J. S.; Lawless, P. A.; Yamamoto, T. Corona Discharge Processes. IEEE Trans. Plasma Sci. 1991, 19, 1152-1166. (52) Reed, T. B. Induction-Coupled Plasma Torch. J. Appl.Phy. 1961, 32, 821-830. (53) Tippayawong, N.; Khongkrapan, P. Development of a laboratory scale air plasma torch and its application to electronic waste treatment. Int. J. Environ. Sci. Technol. 2009, 6, 407-414. (54) Jiang, N.; Ji, A. L.; Cao, Z. X. Atmospheric pressure plasma jet: Effect of electrode configuration, discharge behavior, and its formation mechanism. J. Appl.Phy. 2009, 106. (55) Selwyn, G. S.; Herrmann, H. W.; Park, J.; Henins, I. Materials processing using an atmospheric pressure, RF-generated plasma source. Contrib. Plasma Phys 2001, 41, 610-619. (56) Jianwei Wu, R. C. R., Norman C. Tien, Dachao Li Inkjet Printed Silver Patterning on PDMS to Fabricate Microelectrodes for Microfluidic Sensing. IEEE Sens. 2014 Pro. 2014, 1100-1103. (57) Gou, H. L.; Xu, J. J.; Xia, X. H.; Chen, H. Y. Air plasma assisting microcontact deprinting and printing for gold thin film and PDMS patterns. ACS Appl. Mat. Inter. 2010, 2, 1324-30. (58) Lin, S. Y.; Mckeigue, K.; Maldarelli, C. Diffusion-Controlled Surfactant Adsorption Studied by Pendant Drop Digitization. AIChE Journal 1990, 36, 1785-1795. (59) Owen, M. J.; Smith, P. J. Plasma treatment of polydimethylsiloxane. J.Adhes.Sci. Technol.1994, 8, 1063-1075. (60) Zhang, W.; Dehghani-Sanij, A. A.; Blackburn, R. S. IR study on hydrogen bonding in epoxy resin–silica nanocomposites. Prog. Nat. Sci. 2008, 18, 801-805. (61) Bessonov, A.; Kirikova, M.; Haque, S.; Gartseev, I.; Bailey, M. J. A. Highly reproducible printable graphite strain gauges for flexible devices. Sens. Actuators, A 2014, 206, 75-80. (62) Lee, W.; Koo, H.; Sun, J.; Noh, J.; Kwon, K. S.; Yeom, C.; Choi, Y.; Chen, K.; Javey, A.; Cho, G. A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors. Sci. Rep. 2015, 5, 17707. (63) Wang, X.; Gu, Y.; Xiong, Z.; Cui, Z.; Zhang, T. Silk-molded flexible, ultrasensitive, and highly stable electronic skin for monitoring human physiological signals. Adv. Mater. 2014, 26, 1336-42. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/50715 | - |
| dc.description.abstract | 本研究使用大氣電漿改質疏水性聚二甲基矽氧烷（PDMS）表面製備印刷軟性導電薄膜。近年來，軟性電子元件受到廣大的矚目，其中又以聚二甲基矽氧烷（PDMS）最受矚目，但疏水性的表面限制其應用性，因此本文利用大氣電漿處理氧化PDMS表面，製造一層親水性二氧化矽表面層，改善其疏水性質，並用XPS及AFM證實其二氧化矽層存在的特性。此外，本文中改變大氣電漿操作參數，如氣體種類、電漿功率及掃描次數，以獲得親水時效性最長的二氧化矽層的表面。再將商用導電銀膠利用網版印刷方式印刷於大氣電漿處理過的PDMS表面上，以製造可拉伸式且高黏著性導電薄膜。由於導電銀膠中的環氧樹脂和二氧化矽表面層之間的強結合力的結果，在PDMS上印刷圖案經過多種的附著力試驗均完好無損，表現出了良好的附著力，彎曲，扭轉，和拉伸條件印刷導電薄膜顯示出良好的導電性能，展現強大的機械穩定性。最後，我們印刷導電薄膜應用至壓力感測器，展現出良好的靈敏度和快速響應時間。本研究提出的大氣電漿改質PDMS表面具有簡單與方便之特性，可應用於多種塗佈或印刷製程前處理，來增加印刷膠體與疏水性基材的黏著性。 | zh_TW |
| dc.description.abstract | In this study, an effective plasma treatment method was developed to modify polydimethylsiloxane (PDMS) surface to enhance the adhesion of printed conductive thin films. After the plasma treatment, a silica-like surface layer, which was confirmed with XPS results, was formed on the PDMS surface and resulted in a drastic decrease in water contact angle. The silica layer disappeared after a few hours and the treated PDMS surface recovered it hydrophobicity. Effects of gas and plasma powers on the transient contact angle decreases were carefully examined to extend the life time of the surface silica layers. Conductive ink with epoxy resin was screen-printed on the plasma-treated PDMS surface. The printed patterns showed good adhesion, as a result of the strong binding between epoxy resin and the silica surface layer, and can sustain well in tape and sonication tests. Bending and stretching tests were also performed to test the stability of the printed tracks. Finally, printed pressure sensors with good sensitivity and fast response times were fabricated to demonstrate the capability of applying this method for the realization of printed electric devices. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-15T12:54:12Z (GMT). No. of bitstreams: 1 ntu-105-R03524044-1.pdf: 2930029 bytes, checksum: 6e4643b527ba75d6b5ed6a1e387d17d6 (MD5) Previous issue date: 2016 | en |
| dc.description.tableofcontents | 目錄
口試委員審定書. I 謝 誌 II 中文摘要 III ABSTRACT IV 圖目錄 VII 表目錄 IX 第一章 緒論 1 1.1 研究背景與動機 1 1.2 研究目的 2 1.3 論文架構 2 第二章 文獻回顧 3 2.1 Polydimethylsiloxane(PDMS) 3 2.2 PDMS合成 5 2.2.1 Dimethyldichlorosilane(DMDCS)的製備與純化 6 2.2.2 Dimethyldichlorosilane(DMDCS)純化 7 2.2.3 Dimethyldichlorosilane(DMDCS)直接聚合反應 8 2.2.4 聚矽氧烷的環化反應 9 2.2.5開環聚合PDMS 10 2.3 PDMS電子元件 14 2.3.1黏著性塗料 15 2.3.2翻模法 16 2.3.3表面電漿處理 18 第三章 實驗系統程序 29 3.1實驗藥品與儀器介紹 29 3.1.1 實驗藥品 29 3.1.2實驗儀器 30 3.2網版印刷機工作原理 31 3.2.1網版印刷特質 31 3.4接觸角量測儀工作原理 33 3.5實驗流程 37 3.5.1基材合成 37 3.5.2 電漿表面改質處理程序 38 3.5.3 網版印刷製備PDMS導電薄膜程序 39 第四章 大氣電漿表面改質PDMS表面 40 4.1靜態接觸角分析 40 4.2表面分析 43 4.3 疏水性恢復機制 48 4.4黏著力測試 50 4.5黏合介面分析 52 4.6彎曲扭曲拉伸測試 54 4.7壓力感測器 57 4.7.1響應時間與靈敏度(sensitivity) 58 第五章 結論 60 第六章 未來展望 61 參考文獻 62 | |
| dc.language.iso | zh-TW | |
| dc.subject | 大氣電漿 | zh_TW |
| dc.subject | 印刷可拉伸式電子元件 | zh_TW |
| dc.subject | 聚二甲基矽氧烷 | zh_TW |
| dc.subject | 導電薄膜 | zh_TW |
| dc.subject | 黏著力 | zh_TW |
| dc.subject | flexible printed electronics | en |
| dc.subject | stretchable electronics | en |
| dc.subject | adhesion | en |
| dc.subject | flexible printed electronics | en |
| dc.subject | atmospheric plasma treatment | en |
| dc.subject | conductive thin film | en |
| dc.subject | PDMS | en |
| dc.subject | conductive thin film | en |
| dc.subject | PDMS | en |
| dc.subject | stretchable electronics | en |
| dc.subject | adhesion | en |
| dc.subject | atmospheric plasma treatment | en |
| dc.title | 電漿增進PDMS與導電膠體附著性之研究 | zh_TW |
| dc.title | Adhesion Enhancement of PDMS Surface for Stretchable Printed Conductive Tracks with Atmospheric Plasma Treatment | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 104-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 陳立仁(Li-Jen Chen),劉定宇(Ting-Yu Liu) | |
| dc.subject.keyword | 黏著力,大氣電漿,導電薄膜,聚二甲基矽氧烷,印刷可拉伸式電子元件, | zh_TW |
| dc.subject.keyword | adhesion,stretchable electronics,conductive thin film,PDMS,atmospheric plasma treatment,flexible printed electronics, | en |
| dc.relation.page | 66 | |
| dc.identifier.doi | 10.6342/NTU201600925 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2016-07-18 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
| 顯示於系所單位： | 化學工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-105-1.pdf 未授權公開取用 | 2.86 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。