請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49284
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 盧信嘉 | |
dc.contributor.author | Yuan-Hong Wang | en |
dc.contributor.author | 王源宏 | zh_TW |
dc.date.accessioned | 2021-06-15T11:22:06Z | - |
dc.date.available | 2019-08-26 | |
dc.date.copyright | 2016-08-26 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-08-17 | |
dc.identifier.citation | [1] David M. Pozar edition, Microwave Engineering, 3rd edition, John Wiley & Sons, 2005.
[2] G. F. Engen and C. A. Hoer, “Thru-reflect-line: an improved technique for calibrating the dual six-port automatic network analyzer,” IEEE Trans. Microwave Theory Tech., vol. MTT-27, pp. 987–993. Dec. 1979. [3] C. Seguinot, P. Kennis, J.-F. Legier, F. Huret, E. Paleczny, and L. Hayden, “Multimode TRL. A new concept in microwave measurements: theory and experimental verification,” IEEE Trans. Microwave Theory Tech., vol. MTT-46, pp. 536–542, May 1998. [4] Maarten Cauwe and Johan De Baets, “Broadband material parameter characterization for practical high-speed interconnects on printed circuit board,” IEEE Trans. Advanced Packaging, vol. 31, no. 3, pp. 649–656, Aug. 2008. [5] Chanchal Yadav, “A comparative study of resonator based method to estimate permittivity,” International Journal of Engineering Research & Technology (IJERT), vol. 3, no. 6, pp. 409–417, June 2014. [6] E. Hammerstad and O. Jensen, “Accurate models for microstrip computer-aided design,” 1980 IEEE MTT-S International Microwave Symposium Digest, May 1980 , pp. 407–409. [7] P.G. Huray, O. Oluwafemi, J. Loyer, E. Bogatin, and X. Ye, “Impact of copper surface texture on loss: a model that works,” DesignCon 2010, pp. 1–22, Feb. 2010. [8] Hsin-Chia Lu, Yuan-Hong Wang, Jeng-Long Leou, Harrison Chan and Scott Chen , “Chip last fan-out packaging fir millimeter wave application,” IEEE Electronic Components and Technology Conference (ECTC), Las Vegas, NV, USA , pp.1303-1308, May 2016 [9] C. E. Balanis, Antenna Theory: Analysis and Design, 3rd edition, John Wiley & Sons, 2005. [10] Z. Chen and S. Otto, “A taper optimization for pattern synthesis of microstrip series-fed patch array antennas,” 2009 Eur. Wirel. Technol. Conf., September, 2009, pp. 160–163. [11] D. G. Babas and J. N. Sahalos, “Synthesis method of series-fed microstrip antenna arrays,” Electronics Letters, vol. 43, no. 2, p. 78, Nov. 2007. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/49284 | - |
dc.description.abstract | 本論文分為兩部分,一開始先根據傳輸線理論敘述各種傳輸線,例如:微帶線,帶線,共面波導,推導不同種類的傳輸線特性,接著利用傳輸線的特性去求得板材電氣特性公式。也將會利用相似矩陣具有相同的特徵值及使用環形共振器方法去萃取參數並驗證準確性,此外會考慮額外效應,如表面粗造度,接下來,將進行多種類型傳輸線及多層板材電氣參數萃取。
第二部分為天線設計,包含一個應用於5G通訊基地台的天線及24GHz汽車防撞雷達的天線。5G的天線使用先豐板材,在板材特性確定後,進行天線元件設計,而天線架構採用串接饋入微帶天線,以增加天線增益。先以等振幅饋入形式設計串接饋入天線,操作在Ka band,中心頻為38GHz。接下來製作在24GHz的防撞汽車雷達的天線。使用Rogers RO4003C板材,為了抑制旁波辦的大小,饋入形式以梯形能量分布。 | zh_TW |
dc.description.abstract | This thesis is divided into two parts. First of all, based on transmission-line theory,different kinds of transmission line are used, for example : a microstrip line, strip line, coplanar waveguide transmission line to derive different types of properties, and then take advantage of the characteristics of the transmission line to obtain the electrical characteristic parameters of substrate. We will use similarity matrix which has the same eigenvalues and use the ring resonator method to extract and verify the accuracy of the parameters. Also additional effects, such as surface roughness and a variety of transmission lines and electrical characteristic parameters of multilayer substrate will be extracted.
The second part is about antenna design, including antennas used in 5G communications base station antennas and 24GHz automotive collision avoidance radar.The antenna for 5G uses the substrate from Boardtek and we use a series-fed antenna to increase antenna gain. Equal amplitude excitation is used at Ka band, at the center frequency of 38GHz. Next, the antenna at 24GHz for automotive radar is designed using Rogers RO4003C substrate. In order to suppress the amplitude of sidelobe, a taper distribution of excitation is used. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T11:22:06Z (GMT). No. of bitstreams: 1 ntu-105-R03942087-1.pdf: 5520858 bytes, checksum: 142bb8728b13b2d1b7cc78cf146f2558 (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 ii ABSTRACT iii 目錄 iv 圖目錄 vi 表目錄 x Chapter 1 動機與論文簡介 1 1.1 研究動機 1 1.2 各章節簡介 2 Chapter 2 板材微波電氣特性 3 2.1 傳輸線理論 3 2.1.1 微帶線(microstrip line) 4 2.1.2 帶線 (stripline) 5 2.1.3 共面波導線(CPW) 6 2.2 板材萃取公式推導與應用 7 2.2.1 TRL介紹 7 2.2.2 板材萃取方法 9 2.3 環形共振器 12 2.4 版材萃取方法應用與驗證 13 Chapter 3 多層板材量測萃取 19 3.1 先豐板材萃取 19 3.1.1 微帶線萃取 19 3.1.2 環形共振器萃取 31 3.2 多層板材萃取 33 Chapter 4 串接饋入微帶天線 50 4.1 微帶天線原理與特性 50 4.2 理論介紹 51 4.2.1 傳輸線模型 51 4.2.2 共振腔模型 54 4.2.3 陣列天線理論 57 4.3 陣列微帶天線設計 58 4.3.1 應用於38GHz的串接饋入微帶天線 58 4.3.2 應用於24GHz汽車防撞雷達之微帶天線陣列 67 Chapter 5 天線量測 74 5.1 量測環境 74 5.1.1 S參數量測 74 5.1.2 場型量測 74 5.2 量測結果 75 Chapter 6 結論與展望 85 參考文獻 86 | |
dc.language.iso | zh-TW | |
dc.title | 多層板材微波電氣特性萃取及串接饋入微帶天線 | zh_TW |
dc.title | Multilayer substrate electrical parameter extraction at microwave band and series fed patch antennas | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 毛紹綱,柳政龍 | |
dc.subject.keyword | 傳輸線,串接饋入微帶天線,毫米波,環形共振器,介電係數,損耗正切, | zh_TW |
dc.subject.keyword | transmission line,series-fed patch antenna,millimeter-wave,ring resonator,dielectric constant,loss tangent, | en |
dc.relation.page | 87 | |
dc.identifier.doi | 10.6342/NTU201603179 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2016-08-19 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-1.pdf 目前未授權公開取用 | 5.39 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。