請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/47810
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林恭如 | |
dc.contributor.author | Kuang-Nan Cheng | en |
dc.contributor.author | 鄭光男 | zh_TW |
dc.date.accessioned | 2021-06-15T06:19:54Z | - |
dc.date.available | 2012-08-12 | |
dc.date.copyright | 2010-08-12 | |
dc.date.issued | 2010 | |
dc.date.submitted | 2010-08-10 | |
dc.identifier.citation | Chapter 1
[1.1] A. J. D. Maria, , D. A. Stetser, and H. Heynau, “Self mode-locking of lasers with saturable absorbers” Appl. Phys. Lett. 8 174 (1966). [1.2] U. Keller, “Recent developments in compact ultrafast lasers”, Nature 424 831 (2003). [1.3] J. K. Jabczyński, W. Zendzian, J. Kwiatkowski, “Q-switched mode-locking with acousto-optic modulator in a diode pumped Nd:YVO4 laser”, Opt. Express 14 2184 (2006). [1.4] G. R. Lin, Y. C. Lin, K. C. Lin, and G. H. Peng, “Electron–Hole Plasma-Induced Spectral Blueshift of Optical-Data Injection Mode-Locked Semiconductor Optical Amplifier Fiber Laser”, J. Lightwave Technol. 28 246 (2010). [1.5] http://en.wikipedia.org/wiki/Mode-locking#Passive_mode-locking [1.6] E. P. Ippen, C. V. shank, and A. Dienes, “Passive Modelocking of the cw Dye Laser”, Appl. Phys. Lett. 21 348 (1972). [1.7] F. X. Kartner, I. D. Jung, and U. Keller, “Soliton Mode-Locking with Saturable Absorbers”, IEEE J. Sel. Top. Quantum Electron. 2 540 (1996). [1.8] S. Y. Set, H. Yaguchi, Y. Tanaka, and M. Jablonski, “Laser Mode Locking Using a Saturable Absorber Incorporating Carbon Nanotubes”, J. Lightwave Technol. 22 51 (2004). [1.9] H. Kataura, Y. Kumazawa, Y. Maniwa, I. Umezu, S. Suzuki, Y. Ohtsuka and Y. Achiba, “Optical Properties of Single-Wall Carbon Nanotubes”, Synth. Meta. 103 2555 (1999). [1.10] M. Ichida, S. Mizuno, Y. Tani, Y. Saito and A. Nakamura, “Exciton Effects of Optical Transitions in Single-Wall Carbon Nanotubes”, J. Phys. Soc. Jpn. 68 3131 (1999). [1.11] S. Kazaoui, N. Minami, R. Jacquemin, H. Kataura and Y. Achiba, “Amphoteric doping of single-wall carbon-nanotube thin films as probed by optical absorption spectroscopy”, Phys. Rev. B 60 13 339 (1999). Chapter 2 [2.1] S. Iijima, “Helical microtubules of graphitic carbon”, Nature 354 56 (1991). [2.2] S. Iijima and T. Ichihashi, “Single-shell carbon nanotubes of 1-nm diameter”, Nature 363 603 (1993). [2.3] J. W. Mintmire, B. I. Dunlap, and C. T. White, “Are Fullerene Tubules Metallic?”, Phys. Rev. Lett. 68 631 (1992). [2.4] R. Saito, M. Fujita, G. Dresselhaus, and M. S Dresselhaus, “Electronic structure of chiral graphene tubules”, Appl. Phys. Lett. 60 2204 (1992). [2.5] R. Saito, M. Fujita, G. Dresselhaus, and M. S Dresselhaus, “Electronic structure of graphene tubules based on C60”, Phys. Rev. B 46 1804 (1992). [2.6] N. Hamada, S. Sawada, and A. Oshiyama, “New One-Dimensional Conductor: Graphitic Microtubules”, Phys. Rev. Lett. 68 1579 (1992). [2.7] T. W. Odom, J. L. Huang, P. Kim, and C. M. Lieber, “Atomic structure and electronic properties of single-walled carbon nanotubes”, Nature 391 62 (1998). [2.8] R. H. Baughman, A. A. Zakhidov and W. A. de Heer, “Carbon Nanotubes—the Route Toward Applications”, Science 297 787 (2002). [2.9] A. Javey, J. Guo, Q. Wang, M. Lundstrom and H. Dai, “Ballistic carbon nanotube field-effect transistors”, Nature 424 654 (2003). [2.10] J. Kong, N. R. Franklin, C. Zhou, M. G. Chapline, S. Peng, K. Cho, and H. Dai1, “Nanotube Molecular Wires as Chemical Sensors”, Science 287 622 (2000). [2.11] M. F. Lin, “Optical spectra of single-wall carbon nanotube bundles”, Phys. Rev. B, 62 13153 (2000). [2.12] S. M. Bachilo, M. S. Strano, C. Kittrell, R. H. Hauge, R. E. Smalley, and R. B. Weisman, ”Structure-Assigned Optical Spectra of Single-Walled Carbon Nanotubes”, Science 298 2361 (2002) [2.13] E. Kymakis, I. Alexandou, and G. A. J. Amaratunga, “Single-walled carbon nanotube-polymer composites: electrical, optical and structural investigation”, Synt. Meta. 127 59 (2002). [2.14] E. Stratakis, E. Kymakis, E. Spanakis, P. Tzanetakis, and E. Koudoumas, “Polymer-nanotube composite mats with improved field emission performance and stability”, Phys. Chem. Chem. Phys. 11 703 (2009). [2.15] L. Valentini, I. Armentano, J.M. Kenny, S. Bidali, and A. Mariani, “Interaction of oxygen with nanocomposites made of n-type conducting polymers and carbon nanotubes: role of charge transfer complex formation between nanotubes and poly(3-octylthiophene)”, Thin Solid Films, 476 162 (2005). [2.16] F. Du, J. E. Fischer, and K. I. Winey, “Coagulation Method for Preparing Single-Walled Carbon Nanotube/Poly(methyl methacrylate) Composites and Their Modulus, Electrical Conductivity, and Thermal Stability”, Polymer Physics 41 3333 (2003). [2.17] T. Kashiwagi, F. Du, K. I. Winey, K. M. Groth, J. R. Shields, S. P. Bellayer, H. Kim, and J. F. Douglas, ”Flammability properties of polymer nanocomposites with single-walled carbon nanotubes: effects of nanotube dispersion and concentration”, Polymer 46 471 (2005). [2.18] F. Du, R. C. Scogna, W. Zhou, S. Brand, J. E. Fischer, and K. I. Winey, “Nanotube Networks in Polymer Nanocomposites: Rheology and Electrical Conductivity”, Macromolecules 37 9048 (2004). [2.19] J. Arranz-Andre´s and W. J. Blau, “Enhanced device performance using different carbon nanotube types in polymer photovoltaic devices”, Carbon 46 2067 (2008). [2.20] H. E. Unalan, P. Hiralal, D. Kuo, B. Parekh, G. Amaratunga and M. Chhowalla, “Flexible organic photovoltaics from zinc oxide nanowires grown on transparent and conducting single walled carbon nanotube thin films”, J. Mater. Chem. 18 5909 (2008). [2.21] L. Liu, A. H. Barber, S. Nuriel, and H. D. Wagner, “Mechanical Properties of Functionalized Single-Walled Carbon Nanotubes/Poly(vinyl alcohol) Nanocomposties”, Adv. Func. Mater. 15 975 (2005). [2.22] Y. Lin, B. Zhou, K. A. S. Fernando, P. Liu, L. F. Allard, and Y. P. Sun, “Polymeric Carbon Nanocomposites from Carbon Nanotubes Functionalized with Matrix Polymer”, Macromolecules 36 7199 (2003). [2.23] Z. Wang, P. Ciselli, and T. Peijs, ”The extraordinary reinforcing efficiency of single-walled carbon nanotubes in oriented poly(vinyl alcohol) tapes”, Nanotechnology 18 455709 (2007). [2.24] S. Bhattacharyya, E. Kymakis, and G. A. J. Amaratunga, “Photovoltaic Properties of Dye Functionalized Single-Wall Carbon Nanotube/Conjugated Polymer Devices”, Chem. Mater. 16 4819 (2004). [2.25] S. Berson, R. de Bettignies, S. Bailly, S. Guillerez, and B. Jousselme, “Elaboration of P3HT/CNT/PCBM Composites for Organic Photovoltaic Cells”, Adv. Funct. Mater. 17 3363 (2007). [2.26] Y. C. Chen, N. R. Raravikar, L. S. Schadler, P. M. Ajayan, Y. P. Zhao, T. M. Lu, G. C. Wang, and X. C. Zhang, “Ultrafast optical switching properties of single-wall carbon nanotube polymer composites at 1.55 um”, Appl. Phys. Lett. 81 975 (2002). [2.27] K. Kieu and M. Mansuripur, “Femtosecond laser pulse generation with a fiber taper embedded in carbon nanotube/polymer composite”, Opt. Lett., 32 2242 (2007). [2.28] A. Martinez, S. Uchida, Y. W. Song, T. Ishigure and S. Yamashita, “Fabrication of Carbon nanotube–poly-methyl-methacrylate composites for nonlinear photonic devices”, Opt. Express 16 11337 (2008). [2.29] Y. Saito, T. Yoshikawa, S. Bandow, M Tomita and T. Hayashi, “Interlayer spacings in carbon nanotubes”, Phys. Rev. B 48 1907 (1993). [2.30] G. Parthasarathy, B. Sreedhar and T. R. K. Chetty, ”Spectroscopic and X-ray diffraction studies on fluid deposited rhombohedral graphite from the Eastern Ghats Mobile Belt, India”, Curr. Sci. 90 995 (2006). [2.31] A. Charlier, E. McRae, R. Heyd, M.F. Charlier and D. Moretti, “Classification for double-walled carbon nanotubes”, Carbon 37 1779 (1999). [2.32] S. L. Lair, W. C. Herndon and L. E. Murr, “Stability comparison of simulated double-walled carbon nanotube structures”, Carbon 46 2083 (2008). [2.33] Y. Liu, E. I. Meletis, “Evidence of graphitization of diamond-like carbon films during sliding wear”, J. Mater. Sci. 32 3491 (1997). [2.34] 蔡淑慧, “拉曼光譜在奈米碳管檢測上之應用”, 奈米通訊, 第十二卷, 第二期, 47-51. [2.35] J. Zhao, C. Jiang, Y. Fan, M. Burghard, T. Basche, and A. Mews, ” Diameter-Dependent Combination Modes in Individual Single-Walled Carbon Nanotubes”, NanoLetters 2 823 (2002). [2.36] A. M. Dı´ez-Pascual, M. Naffakh, M. A. Go´mez, C. Marco, G. Ellis, M. T. Martı´nez, A. Anso´n, J. M. Gonza´lez-Domı´nguez, Y. Martı´nez-Rubi and B. Simard, “Development and characterization of PEEK/carbon nanotube composites”, Carbon 47 3079 (2009). [2.37] S. Costa, E. Borowiak-Palen, M. Kruszyñska, A. Bachmatiuk and R J. Kaleńczuk, “Characterization of Carbon Nanotubes by Raman spectroscopy”, Materials Science-Poland 26 433 (2008). [2.38] A. Jorio, A. G. Souza Filho, G. Dresselhaus, M. S. Dresselhaus, A. K. Swan, M. S. unlu, B. B. Goldberg, M. A. Pimenta, J. H. Hafner, C. M. Lieber, and R. Saito, “G-band resonant Raman study of 62 isolated single-wall carbon nanotubes”, Phys. Rev. B 65 155412 (2002). [2.39] http://www.photon.t.u-tokyo.ac.jp/~maruyama/kataura/kataura.html#Discussion [2.40] H. Kataura, Y. Kumazawa, Y. Maniwa, I. Umezu, S. Suzuki, Y. Ohtsuka, and Y. Achiba, ”Optical Properties of Single-Wall Carbon Nanotubes”, Synth. Met. 103 2555 (1999). [2.41] http://en.wikipedia.org/wiki/Optical_properties_of_carbon_nanotubes [2.42] M. L. Dennis and I. N. Duling III, “Experimental Study of Sideband Generation in Femtosecond Fiber Lasers”, IEEE J. Quan. Elec. 30 1469 (1994). Chapter 3 [3.1] U. Keller, K. J. Weingarten, F. X. K¨artner, D. Kopf, B. Braun, I. D. Jung, R. Fluck, C. H¨onninger, N. Matuschek, and J. A. der Au, “Semiconductor Saturable Absorber Mirrors (SESAM's) for Femtosecond to Nanosecond Pulse Generation in Solid-State Lasers”, IEEE J. Sel. Top. Quantum Electron. 2 435 (1996). [3.2] I. D. Jung, F. X. Kärtner, N. Matuschek, D. H. Sutter, F. Morier-Genoud, Z. Shi, V. Scheuer, M. Tilsch, T. Tschudi, U. Keller, “Semiconductor saturable absorber mirrors supporting sub-10-fs pulses”, Appl. Phys. B 65 137 (1997). [3.3] Z. Zhang, K. Torizuka, T. Itatani, K. Kobayashi, T. Sugaya and T. Nakagawa, “Self-starting mode-locked femtosecond forsterite laser with a semiconductor saturable-absorber mirror”, Opt. Lett. 22 1006 (1997). [3.4] G. Cerullo, S. De Silvestri, and V. Magni, “Self-starting Kerr-lens mode locking of a Ti:sapphire laser”, Opt. Lett. 19 1040 (1994). [3.5] G. P. A. Malcolm and A. I. Ferguson, “Self-mode locking of a diode-pumped Nd:YLF laser”, Opt. Lett. 16 1967 (1991). [3.6] H. Liu, J. Nees, and G. Mourou, “Diode-pumped Kerr-lens mode-locked Yb:KY(WO4)2 laser”, Opt. Lett. 26 1723 (2001). [3.7] S. Y. Set, H. Yaguchi, Y. Tanaka, and M. Jablonski, “Laser Mode Locking Using a Saturable Absorber Incorporating Carbon Nanotubes”, J. Lightwave Technol. 22 51 (2004). [3.8] K. H. Fong, K. Kikuchi, C. S. Goh, S. Y. Set, R. Grange, M. Haiml, A. Schlatter, and U. Keller, “Solid-state Er:Yb:glass laser mode-locked by using single-wall carbon nanotube thin film”, Opt. Lett. 32 38 (2007). [3.9] S. Yamashita, Y. Inoue, K. Hsu, T. Kotake, H. Yaguchi, D. Tanaka, M. Jablonski, and S. Y. Set, “5-GHz Pulsed Fiber Fabry–Pérot Laser Mode-Locked Using Carbon Nanotubes”, IEEE Photonics Technol. Lett. 17 750 (2005). [3.10] V. Scardaci, A. G. Rozhin, F. Hennrich, W. I. Milne, and A. C. Ferrari, ”Carbon nanotube–polymer composites for photonic devices”, Physica E 37 115 (2007). [3.11] S. Y. Set, H. Yaguchi, Y. Tanaka, and M. Jablonski, “Ultrafast Fiber Pulsed Lasers Incorporating Carbon Nanotubes”, IEEE J. Sel. Top. Quantum Electron. 10 137 (2004). [3.12] H. Kataura, Y. Kumazawa, Y. Maniwa, I. Umezu, S. Suzuki, Y. Ohtsuka and Y. Achiba, “Optical Properties of Single-Wall Carbon Nanotubes”, Synth. Met. 103 2555 (1999). [3.13] T. R. Schibli, K. Minoshima, H. Kataura, E. Itoga, N. Minami, S. Kazaoui, K. Miyashita, M. Tokumoto, Y. Sakakibara, “Ultrashort pulse-generation by saturable absorber mirrors based on polymer-embedded carbon nanotubes”, Opt. Express 13 8025 (2005). [3.14] S. Yamashita, Y. Inoue, S. Maruyama, Y. Murakami, H. Yaguchi, T. Kotake, and S. Y. Set, “Mode-Locked Fiber Lasers Using Adjustable Saturable Absorption in Vertically Aligned Carbon Nanotubes”, Jpn. J. Appl. Phys. 45 L17 (2006). [3.15] Y. W. Song, S. Yamashita, C. S. Goh and S. Y. Set, “Carbon nanotube mode lockers with enhanced nonlinearity via evanescent field interaction in D-shaped fibers”, Opt Lett. 32 148 (2007). [3.16] A. Martinez, K. Zhou, I. Bennion and S. Yamashita, “In-fiber microchannel device filled with a carbon nanotube dispersion for passive mode-lock lasing”, Opt. Express 16 15425 (2008). [3.17] F. Shohda, T. Shirato, M. Nakazawa, J. Mata, and J. Tsukamoto, ”147 fs, 51 MHz soliton fiber laser at 1.56 μm with a fiber-connector-type SWNT/P3HT saturable absorber”, Opt. Express 16 20943 (2008). [3.18] J. C. Chiu, Y. F. Lan, C. M. Chang, X. Z. Chen, C. Y. Yeh, C. K. Lee, G. R. Lin, J. J. Lin, and W. H. Cheng, “Concentration effect of carbon nanotube based saturable absorber on stabilizing and shortening mode-locked pulse”, Opt. Express 18 3592 (2010). [3.19] F. Shohda, M. Nakazawa, J. Mata, and J. Tsukamoto, “A 113 fs fiber laser operating at 1.56 µm using a cascadable film-type saturable absorber with P3HT-incorporated single-wall carbon nanotubes coated on polyamide”, Opt. Express 18 9712 (2010). [3.20] M. L. Dennis and I. N. Duling III, “Experimental Study of Sideband Generation in Femtosecond Fiber Lasers”, IEEE J. Quan. Elec. 30 1469 (1994). [3.21] http://www.dmphotonics.com/Saturable_Absorber_Mirrors/RSAM1064.htm Chapter 4 [4.1] H. Kataura, Y. Kumazawa, Y. Maniwa, I. Umezu, S. Suzuki, Y. Ohtsuka and Y. Achiba, “Optical Properties of Single-Wall Carbon Nanotubes”, Synth. Meta. 103 2555 (1999). [4.2] R. B. Weisman and S. M. Bachilo, “Dependence of Optical Transition Energies on Structure for Single-Walled Carbon Nanotubes in Aqueous Suspension: An Empirical Kataura Plot”, Nano lett. 3 1235 (2003). [4.3] K. Kieu and F. W. Wise, “Soliton Thulium-Doped Fiber Laser With Carbon Nanotube Saturable Absorber”, IEEE Photonics Technol. Lett. 21 128 (2009). [4.4] E. J. R. Kelleher, J. C. Travers, Z. Sun, A. G. Rozhin, A. C. Ferrari, S. V. Popov, and J. R. Taylor, “Nanosecond-pulse fiber lasers mode-locked with nanotubes”, Appl. Phys. Lett. 95 111108 (2009). [4.5] S. Yamashita, Y. Inoue, S. Maruyama, Y. Murakami, H. Yaguchi, T. Kotake and S. Y. Set, “Mode-Locked Fiber Lasers Using Adjustable Saturable Absorption in Vertically Aligned Carbon Nanotubes”, Jpn J. Appl. Phys. 45 L17 (2006). [4.6] A. Martinez, S. Uchida, Y. W. Song, T. Ishigure and S. Yamashita, “Fabrication of Carbon nanotube–poly-methyl-methacrylate composites for nonlinear photonic devices”, Opt Express 16 11337 (2008). [4.7] S. Y. Choi, F. Rotermund, H. Jung, K. Oh and D. I. Yeom, “Femtosecond mode-locked fiber laser employing a hollow optical fiber filled with carbon nanotube dispersion as saturable absorber”, Opt Express 17 21788 (2009). [4.8] F. Shohda, M. Nakazawa, J. Mata, and J. Tsukamoto, “A 113 fs fiber laser operating at 1.56 µm using a cascadable film-type saturable absorber with P3HT-incorporated single-wall carbon nanotubes coated on polyamide”, Opt Express 18 9712 (2010). [4.9] S.Y. Set, H. Yaguchi, Y. Tanaka, and M. Jablonski, “Laser Mode Locking Using a Saturable Absorber Incorporating Carbon Nanotubes”, J. Lightwave Technol. 22 51 (2004). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/47810 | - |
dc.description.abstract | 本論文探討以奈米黏土分散奈米碳管摻雜的高分子膜做為飽和吸收體建構被動鎖模光纖雷射系統,並利用不同材料與光學分析去探討三種不同類型的單臂/雙臂/多臂碳管,在做為飽和吸收體時對鎖模輸出特性的影響。其中樣本A在拉曼分析指出為純度較低的多臂奈米碳管,其吸收能量位置與雷射增益譜乖離;且過多的石墨雜質造成強吸收,因此無法當作飽和吸收體使用。另外,TEM與拉曼分析指出樣本B為單臂奈米碳管,且利用Kataura圖推測位於1.5微米的吸收峰為奈米碳管中的E22躍遷能階。諧波鎖模在使用樣本B當作飽和吸收體之摻挕光纖雷射系統中被觀測到,並且可利用調整摻挕光纖放大器泵浦功率的方式來改變諧波鎖模的階數。另一方面,選區繞射與拉曼分析的結果同時指出樣本C為雙臂奈米碳管,且在1.55微米處,有一個對應奈米碳管中E11躍遷能階的吸收峰。在拉曼頻譜中,利用分裂的拉伸模式可推測出碳管的管徑約為1.42奈米。在使用樣本C當作飽和吸收體之摻挕光纖雷射系統中可得到基頻鎖模脈衝輸出,且利用增加摻挕光纖放大器泵浦功率來加強飽和吸收體脈衝塑型效應以縮短脈衝寬並得到頻譜拓寬。飽和吸收體膜的厚度增加會增大損耗調制深度使得脈衝縮短,利用較高分光比的耦合器則可得到較短的脈衝以及較寬的頻譜。在使用厚度為128微米飽和吸收體之摻挕光纖雷射系統中,可以觀測到792飛秒的脈衝與線寬2.72奈米的光譜。 | zh_TW |
dc.description.provenance | Made available in DSpace on 2021-06-15T06:19:54Z (GMT). No. of bitstreams: 1 ntu-99-R97941110-1.pdf: 2233779 bytes, checksum: c98076bbd2b098c7599376a1ea2203e9 (MD5) Previous issue date: 2010 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 ii ABSTRACT iii CONTENTS v LIST OF FIGURES viii LIST OF TABLES xiii Chapter 1 Introduction 1 1.1 Mode-Locking 1 1.2 Motivation 2 1.3 Organization of the Thesis 2 Chapter 2 Analysis with Three Types of CNTs as Saturable Absorber 3 2.1 Introduction 3 2.2 Sample Preparation and Configuration of EDFL 5 2.3 Results and Discussion 6 2.3.1 Characterize Three Types of CNTs 6 2.3.1.1 TEM analysis 6 2.3.1.2 Raman Spectrum 7 2.3.1.3 Transmission and Absorption 9 2.3.2 EDFL with CNTs Doped Polymer Film 10 2.3.2.1 Variation of Pulse Amplitude and DC Level with Different CNTs Doped SA Film 11 2.3.2.2 Variation of Pulsewidth and Spectral Linewidth with Different CNTs Doped SA Film 13 2.3.3 Harmonic Mode-Locking 15 2.3.3.1 HML with General Configuration 15 2.3.3.2 HML with all-APC Configuration 16 2.3.3.3 Comparison of Two Configurations 17 2.3.4 Summary 17 Chapter 3 The Effect of Saturable Absorber Thickness of Film C in Mode-Locked Erbium Doped Fiber Laser System 41 3.1 Introduction 41 3.2 Results and Discussion 42 3.2.1 Variation of Pulse Amplitude and DC Level with Different Pumping Powers 42 3.2.2 Variation of Pulsewidth and Spectral Linewidth with Different Pumping Powers 45 3.2.3 Variation of Pulsewidth and Spectral Linewidth with different thicknesses of SA film 47 3.2.4 Summary 49 Chapter 4 The Effect of Feedback with Different Ratios in Mode-Locked Erbium Doped Fiber Laser System 58 4.1 Introduction 58 4.2 Results and Discussion 59 4.2.1 Variation of Pulse Amplitude and DC Level with Different Feedback Ratios 59 4.2.2 Variation of Pulsewidth and Spectral Linewidth with Different Feedback Ratios 61 4.3 Summary 62 REFERENCE 69 作者簡介 80 Publication List 81 | |
dc.language.iso | en | |
dc.title | 以奈米碳管摻雜高分子膜飽和吸收體建構被動鎖模光纖雷射 | zh_TW |
dc.title | Carbon Nanotube Doped Polymer Saturable Absorber Based Passively Mode-Locked Fiber Laser | en |
dc.type | Thesis | |
dc.date.schoolyear | 98-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 鄭木海,吳志毅,李晁逵 | |
dc.subject.keyword | 鎖模,奈米黏土,摻挕光纖雷射,飽和吸收體,多臂奈米碳管,單臂奈米碳管,諧波鎖模,雙臂奈米碳管,飛秒雷射,分光比, | zh_TW |
dc.subject.keyword | mode-locking,MMT clay,erbium doped fiber laser,saturable absorber,MWCNT,SWCNT,harmonic mode-locking,DWCNT,femtosecond laser,coupling ratio, | en |
dc.relation.page | 81 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2010-08-10 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
顯示於系所單位: | 光電工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-99-1.pdf 目前未授權公開取用 | 2.18 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。