請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/47518
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 劉佩玲(Pei-Ling Liu) | |
dc.contributor.author | Chia-Shen Chen | en |
dc.contributor.author | 陳家紳 | zh_TW |
dc.date.accessioned | 2021-06-15T06:03:55Z | - |
dc.date.available | 2011-08-19 | |
dc.date.copyright | 2010-08-19 | |
dc.date.issued | 2010 | |
dc.date.submitted | 2010-08-16 | |
dc.identifier.citation | 1. Popovics, John S. and Jodeph, L. Rose (1994),”A survey of developments in ultrasonics NDE of concrete” IEEE Transaction on Ultrasonics, Ferroelectrics, and Frequency Control, Vol.41, No. 1, pp. 140-143
2. Wu TT, Fang JS, Liu PL. Detection of the depth of a surface-breaking crack using transient elastic waves. J Acoust Soc Am 1995;97(3):1678–86 3. Lin, Y., Su, W.C. The use of stress waves for determining the depth of surface- opening cracks in concrete structures. ACI Mater J 1996;93(5):494–505. 4. Liu PL, Tsai CD, Wu TT. Imaging of surface-breaking concrete cracks using transient elastic waves. NDT E Int 1996;29(5):323–31. 5. 童建樺, 彈性波混凝土品質檢測系統之研製與應用. 國立台灣大學應用力學研究所,博士論文,2001 6. Corio, N. J., Sansalone, M. and Hsu, N. (1986).”A point source point receiver pulse-echo technique for flaw detection in concrete,”ACI Journal,proceeding, Vol.83, pp.199-208 7. Lin, Y., Sansalone M. (1991),”Detecting Flaws in Concrete Beams and Columns Using the Impact-Echo Method”, Materials J. the American Concrete Institte 8. Lin Y. et al. (2003), A simple Device for Detecting Impact Time in Impact-Echo Testing of Concrete”, NDT & E, Vol.37, pp1~8. 9. Liu PL, Lee KH, Wu TT, Kuo MK. Scan of surface-opening cracks in reinforced concrete using transient elastic waves. NDT E Int 2001;34(3):219–26. 10. 蔡崇道, 暫態彈性波在非破壞檢測之應用─層狀介質反算及混凝土裂縫偵測. 國立台灣大學應用力學研究所,博士論文,1997 11. Ohtsu M, Watanabe T. Stack imaging of spectral amplitudes based on impact- echo for flaw detection. NDT E Int 2002;35(3):189–96. 12. Liu PL, Yiu CY. Imaging of concrete defects using elastic wave tests. In: the 2002 Far-East conference on nondestructive testing. Tokyo, Japan, 2002. 13. Schubert F, Wiggenhauser H, Lausch R. On the accuracy of thickness measurements in impact-echo testing of finite concrete specimens-numerical and experimental results. Ultrasonics 2004;42:897–901 14. Kohl C, Streicher D. Results of reconstructed and fused NDT-data measured in the laboratory and on-site at bridges. Cem Concr Compos 2006;28(4):402–13. 15. Tong JH, Liao ST, Lin CC. A new elastic-wave-based imaging method for scanning the defects inside the structure. IEEE Trans ultrason, ferroelectr, freq control 2007;54(1):128–37. 16. 葉柏涼, 敲擊回音法之時間-頻率域分析與影像法. 國立台灣大學應用力學研究所,博士論文,2006 17. 徐耿蒼, 林宜清, and 鄭家齊, 敲擊回音正規化頻譜之應用. 第十四屆非破壞檢測技術非破壞檢測研討會, 2008.11. 南投 18. Donald Pratt, Marry Sansalone.Impact-Echo Signal Interpretation Using Artificial Intelligence. ACI Materials journal.1992 19. Markus Motz, Patrick Haller. Impact-Echo: New Developments Regarding Hardware and Software. NDT-CE, Gerlingen ,Germany,2003 20. Algernon,D., Wiggenhauser, H., and Schubert, F. A New Approach for the Investigation of Geometry Effects in Impact-echo Measurements-experimental Results and Numerical Simulations. in European Conference on Nondestructive Testing 2006. Berlin, Germany. 21. Slamet Riyadi , Khairul Anuar Mohd. Nayan , Mohd. Marzuki Mustafa, Construction and Analytical Application of a Microcontrollerbased Portable Concrete Thickness Tester, EuroJournals Publishing, Inc. 2007 22. Federal Institute for Materials Research and Testing .Automated 2D scanning System for Non-destructive Testing Applying Echo-Methods.2006 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/47518 | - |
dc.description.abstract | 敲擊回音法利用物體表面的位移訊號進行傅立葉轉換,由頻率域尖峰推算內部可能存在的缺陷位置,至今已廣泛應用於工程及結構物檢測。由於量測方式需要以外力敲擊產生暫態應力波,在進行大範圍檢測時,以手動逐點操作相當費時。本文旨在發展一套應用敲擊回音原理的自動檢測系統,可針對二維平面進行掃描,大幅提升檢測速度。
硬體方面我們分為量測模組與軌道兩部分進行設計,模組使用感應馬達作為動力,帶動敲擊構件上升並壓縮彈簧,釋放後向下撞擊,以此產生重複性波源,並搭載壓電位移接收器,以獲得敲擊後的表面位移訊號。軌道採用齒條的型式,以步進馬達驅動模組前進,可達到精密的移動量,並具備擴充能力,針對大面積區域可延伸軌道長度,增加其應用性。 軟體開發上我們使用LabVIEW撰寫應用程式,功能包含單晶片指令的下達、位移訊號擷取以及訊號處理工作。在控制系統完成檢測工作後,可單獨檢視各測點的時間域、頻率域訊號,或一次讀取測線、測面的複數點資料,繪製成色階影像圖,以視覺化的方式呈現內部缺陷資訊。並於人機介面上設計了深度換算、影像對比調整等功能,方便檢測工作的進行。 本研究將檢測系統架設於一模型試體,實際測試其效能。首先對系統下達不同間距的移動指令,觀察其移動誤差。並利用單點重複敲擊,驗證機械敲擊波源的重複性。為了測試敲擊構件所激發的頻率,我們將5種構件裝載於模組,實際進行厚度及裂縫檢測,發現減輕構件重量可激發較高頻率的應力波,可使用於檢測淺層裂縫。最後我們繪製出試體斷面影像圖,透過色階對比可清楚觀察到缺陷位置,證明了自動檢測系統的可用性。 | zh_TW |
dc.description.provenance | Made available in DSpace on 2021-06-15T06:03:55Z (GMT). No. of bitstreams: 1 ntu-99-R97543055-1.pdf: 3578887 bytes, checksum: 06317f2c9ca3eef0b9d1d765e1d607b5 (MD5) Previous issue date: 2010 | en |
dc.description.tableofcontents | 致謝 I
摘要 II 目錄 IV 圖目錄 VI 表目錄 IX 第一章 前言 1 1-1研究動機 1 1-2文獻回顧 2 1-3內容大綱 4 第二章 敲擊回音法原理 5 2-1應力波傳行為 5 2-2敲擊回音法 7 2-3敲擊回音試驗參數 10 2-3-1敲擊源 11 2-3-2總取樣時間 14 2-3-3取樣時距 15 2-4傅立葉轉換 15 2-4-1傅立葉轉換原理 16 2-4-2快速傅立葉轉換 17 2-4-3取樣定理 19 2-5敲擊回音法應用算例 21 第三章 頻率域二維影像法 28 3-1垂直斷面掃描法 28 3-2改良式垂直斷面掃描法 30 3-3水平切面掃描法 32 第四章 系統硬體開發 40 4-1量測模組 41 4-1-1敲擊波源設計 41 4-1-2壓電位移接收器 44 4-1-3感應馬達 45 4-1-4模組控制 46 4-2二維量測軌道 47 4-2-1軌道設計 48 4-2-2移動精度 49 4-2-3軌道架設 50 4-2-4擴充性 50 第五章 系統程式 65 5-1程式架構 66 5-2機構動作控制 67 5-3訊號資料擷取 69 5-4即時訊號處理 71 5-4-1單點訊號檢視 71 5-4-2多點訊號分析 72 第六章 系統及模型試驗 81 6-1移動精度試驗 81 6-2模型試體 82 6-3參數設定 82 6-4系統整合測試 83 6-5敲擊源試驗 84 6-5-1敲擊源 84 6-5-2厚度檢測 85 6-5-3裂縫檢測 86 6-6訊號處理及影像法 87 6-6-1單點重複性試驗 87 6-6-2垂直斷面影像法 88 6-6-3水平切面影像法 89 第七章 結論 109 參考文獻 112 | |
dc.language.iso | zh-TW | |
dc.title | 敲擊回音二維自動檢測系統之開發 | zh_TW |
dc.title | The Development of an Automatic Two-Dimensional Impact-Echo Scanning System | en |
dc.type | Thesis | |
dc.date.schoolyear | 98-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 蔡崇道,童建樺 | |
dc.subject.keyword | 敲擊回音法,自動化,掃描, | zh_TW |
dc.subject.keyword | Impact-Echo method,automatic,scanning, | en |
dc.relation.page | 113 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2010-08-16 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-99-1.pdf 目前未授權公開取用 | 3.5 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。