請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/46516
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳炳煇(Ping-Hei Chen) | |
dc.contributor.author | Hong-Bin You | en |
dc.contributor.author | 游宏彬 | zh_TW |
dc.date.accessioned | 2021-06-15T05:13:12Z | - |
dc.date.available | 2015-07-26 | |
dc.date.copyright | 2010-07-26 | |
dc.date.issued | 2010 | |
dc.date.submitted | 2010-07-22 | |
dc.identifier.citation | [1]C. Wheatstone, 'Contributions to the Physiology of Vision,' Philosophical Transactions of the Royal Society of London, Vol. 142, pp. 1-17, 1852.
[2]林榮堂,柱狀透鏡陣列立體顯示技術之最佳化,世新大學圖文傳播暨數位出版學系碩士論文,2005。 [3]Nvidia, http://www.nvidia.com.tw/object/3D_Vision_Discover_Main_tw.html. [4]李偉誠,利用視差遮蔽法完成雙眼機械頭於平面顯示器之立體顯示,成功大學機械工程學系碩士論文,2005。 [5]N. Qian and R. Andersen,'A physiological model for motion-stereo integration and a unified explanation of pulfrich-like phenomena,' Vision Research, Vol. 37, pp. 1683-1698, 1997. [6]馬嘯山,平面資訊共焦成像解析度分析研究,世新大學新聞傳播學院平面傳播科技學系碩士論文,2004。 [7]馬雲麒,數位全像3D物件加解密技術之研究,世新大學新聞傳播學院平面傳播科技學系碩士論文,2004。 [8]吳文和,隨機點立體成像技術及其應用於光柵板立體印刷之研究,世新大學新聞傳播學院圖文傳播暨數位出版學系碩士論文,2005。 [9]陳申昌,多視角柱狀陣列透鏡螢幕立體顯示器之模擬與設計,中華大學電機工程學系碩士論文,2002。 [10]耿繼業、何建娃,幾何光學,全華科技圖書股份有限公司,2006。 [11]H. Barlow, C. Blakemore and J. Pettigrew, 'The neural mechanism of binocular depth discrimination,' The Journal of Physiology, Vol. 193, pp. 327-342, 1967. [12]復視康光電科技股份有限公司,http://www.eyeok.com.tw。 [13]張榮森,立體視覺影像之光學設計,中央大學光學科學系碩士論文,1997。 [14]T. Okoshi, Three-dimensional imaging techniques, Academic Press, 1976. [15]B. Rosenthal, 'Lenticular optical system,' United States Patent No.: 0056033 A1, 2006. [16]S. Brosh and P. Gottfried, 'Cylindrical lenticular image and method,' United States Patent No.: 6251566 B1, 1997. [17]E. Hecht, Optics, Addison Wesley Longman, 1998. [18]Y. Lee and J. Ra, 'Reduction of the distortion due to non-ideal lens alignment in lenticular 3D displays,' SPIE and IS&T, Vol. 5664, pp. 506-516, 2005. [19]D. Smith, 'Model-based error diffusion for high fidelity lenticular screening,' Optics Express, Vol. 14, pp. 3214-3224, 2006. [20]S. Kim, J. Yoon, C. Yu, D. Kim, K. Chung, H. Lim, Y. Lee, H. Park, J. Ra and L. Kim, 'A 36 fps SXGA 3D display processor embedding a programmable 3D graphics rendering engine,' IEEE Journal of Solid-State Circuits, Vol. 43, pp. 1247-1259, 2008. [21]R. Borner, 'Autostereoscopic 3D-imaging by front and rear projection and on flat panel displays,' Displays, Vol. 14, pp. 39-46, 1993. [22]C. Van Berkel, 'Image preparation for 3D-LCD,' Proceedings of SPIE, Vol. 3639, pp. 84-91, 1999. [23]愛發股份有限公司,http://www.apic.com.tw/products/cax_tracepro.html。 [24]B. Alonso, J. Maquet and C. Sanchez, 'Glass transition of polydimethylsiloxane-vanadate hybrid materials studied through 17O and 51V NMR,' Journal of Non-crystalline Solids, Vol. 277, pp. 58-62, 2000. [25]張瑞斌,微電鍍技術及其在生物晶片之應用,國立成功大學工程科學系碩士論文,2002。 [26]愛爾得資訊股份有限公司,http://www.iart3d.com/TC/cindex.htm。 [27]台灣愛普生科技貿易有限公司,http://w3.epson.com.tw/epson/index.asp。 [28]Y. Lee and J. Ra, 'Image distortion correction for lenticula misalignment in three-dimensional lenticular displays,' Optical Engineering, Vol. 45, pp. 017007 1-9, 2006. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/46516 | - |
dc.description.abstract | 本研究使用具可撓性的PDMS材料利用壓印製程製作微柱狀透鏡陣列,並且將經過影像處理的圖像與柱狀透鏡結合,藉由柱狀透鏡具有分光的光學特性,使得左右眼分別看不同的影像而達到3D立體的效果。針對不同的影像參數,經實驗結果得知拍攝的影像數愈多,在不同角度觀看立體影像會有較平滑的效果,即表示殘影的現象較少;並且隨著拍攝的光角愈大,立體效果愈好。針對不同參數的柱狀透鏡,經由實驗量測結果,柱狀透鏡的線距(Pitch)愈小,3D立體影像的解析度愈高;並且隨著柱狀透鏡的曲率半徑增大,在Stereoscopic angle較小時即可以觀看到在相同光角下最深的立體厚度,表示立體深度空間感的效果愈明顯,並將此現象定義為本研究判斷3D立體效果好壞的方法。接著利用PDMS具有可撓的特性,將柱狀透鏡放置於不同半徑的曲面上,經實驗結果得知隨著曲面半徑的減小,透鏡的曲率半徑與線距隨之增加,導致立體影像產生嚴重的扭曲現象。本研究藉由影像與透鏡的修正改善立體影像的品質並且達到良好的3D立體效果。最後將平面式與曲面式的立體影像以Stereoscopic angle大小判斷立體效果好壞的指標進行比較;經實驗結果,曲面式立體影像Stereoscopic angle較小,亦表示曲面式立體影像的3D立體效果較佳。 | zh_TW |
dc.description.abstract | In this study, using the flexible material of PDMS to fabricate the lenticular lens with imprinting process, and combining the lenticular lens and interlaced images to make our both eyes see the different images separately by means of the optical properties of lenticular lens which produces the three dimensional stereoscopic images. The experimental results in aspect of different parameters of images demonstrated that the more number of images of taking photos, seeing the stereoscopic images in different angle is more smoother; and with increase of the optical angle, the stereoscopic effect is more better. In the aspect of different lenticular lens, the results showed that the smaller pitch of the lenticular lens, the higher resolution of stereoscopic images; and when the curvature radius of the lenticular lens increases, it can be seen the deepest stereoscopic thickness in the same optical angle in smaller Stereoscopic angle, which indicates that the stereoscopic depth sensing is more obvious. And it is a method defined to determine the quality of the effect of the stereoscopic images. Finally, the lenticular lens were placed on the different radius of curved surface using the flexible property of PDMS, and the experimental results showed that with the decrease of the radius of curved surface, the curvature radius and pitch of the lenticular lens will increase, causing the stereoscopic images to produce obvious phenomenon of distortion. However, by modification of images and lenticular lens , it can be showed the better image quality and stereoscopic effect on the curved surface. And comparing to the flat and the curved stereoscopic images using the index of Stereoscopic angle to determine the quality of stereoscopic effect, the results showed that the Stereoscopic angle of the curved stereoscopic images are smaller than flat ones; namely, the stereoscopic effect of curved stereoscopic images are more obvious. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T05:13:12Z (GMT). No. of bitstreams: 1 ntu-99-R97522104-1.pdf: 12787397 bytes, checksum: f4d86ee148fcdf67e4eae2707b6a2c85 (MD5) Previous issue date: 2010 | en |
dc.description.tableofcontents | 口試委員審定書 Ι
致謝 II 摘要 III Abstract IV 英文符號說明 VI 希臘符號說明 VIII 目錄 IX 附圖目錄 XIII 附表目錄 XIX 第一章 緒論 1 1.1 前言 1 1.2 研究動機與目的 1 1.3 文獻回顧 2 1.3.1 立體鏡 2 1.3.2 紅藍眼鏡立體成像法 3 1.3.3 視差遮障立體成像法 4 1.3.4 Pulfrich立體成像法 4 1.3.5 偏光立體成像法 5 1.3.6 立體全像術 6 1.3.7 隨機點立體成像法 7 1.3.8 光柵板立體印刷 8 1.4 章節概要 8 第二章 基本原理介紹 10 2.1 幾何光學成像原理探討 10 2.1.1 幾何光學定理 10 2.1.1.1 反射定律 10 2.1.1.2 折射定律 11 2.1.1.3 全反射 13 2.1.2 幾何成像 13 2.1.2.1 平面鏡成像 13 2.1.2.2 球面鏡成像 14 2.1.2.3 透鏡成像 16 2.2 立體視覺成像原理 17 2.2.1 眼睛與立體影像之關係 18 2.2.2 產生深度感的因素 19 2.2.3 雙眼視差與光角之限制與量化 23 2.2.3.1 雙眼視差的限制與量化 23 2.2.3.2 光角視差的限制與量化 25 第三章 柱狀透鏡立體影像技術 29 3.1 柱狀透鏡陣列立體成像 29 3.1.1 柱狀透鏡之光學特性 29 3.1.2 柱狀透鏡立體成像原理 33 3.2 立體影像製作 35 3.2.1 影像拍攝 35 3.2.2 不同視角圖像的影像處理之基本原理 39 3.3 不同視角的圖像與柱狀透鏡之關係 40 3.3.1 合成圖像與柱狀透鏡的排列關係 40 3.3.2 根據合成圖像與柱狀透鏡的對應關係計算觀賞立體影像之距離 42 第四章 實驗分析與討論 45 4.1 柱狀透鏡陣列製作 45 4.1.1 柱狀透鏡之設計 45 4.1.1.1 柱狀透鏡的曲率半徑與線距之設計 45 4.1.1.2 柱狀透鏡厚度之設計 47 4.1.2 柱狀透鏡之製作 51 4.2 影像製作 58 4.2.1 影像拍攝 58 4.2.2 合圖影像 63 4.3 立體效果的探討與分析 67 4.3.1 拍攝影像的張數多寡對立體影像效果的影響 68 4.3.1.1 透鏡L3-P630-R412-OA6 (線距630 μm) 68 4.3.1.2 透鏡L2-P507-R391-OA6 (線距507 μm) 70 4.3.1.3 透鏡L4-P389-R417-OA6 (線距389 μm) 71 4.3.2 製作影像的光角大小對立體影像效果的影響 72 4.3.3 柱狀透鏡的線距寬度對立體影像效果的影響 74 4.3.4 柱狀透鏡的曲率半徑大小對立體影像效果的影響 75 4.3.4.1 光角為6度時不同曲率半徑的透鏡之影響 76 4.3.4.2 光角為8度時不同曲率半徑的透鏡之影響 78 4.3.4.3 光角為10度時不同曲率半徑的透鏡之影響 79 4.4 可撓式立體影像的分析 82 4.4.1 柱狀透鏡在曲面上之情形 82 4.4.2 曲面立體影像的扭曲現象之修正 85 4.4.3 曲面立體影像修正後的結果 89 4.4.4 曲面式立體影像的3D效果 92 4.4.4.1 光角為6度時不同曲率半徑的透鏡之影響 92 4.4.4.2 光角為8度時不同曲率半徑的透鏡之影響 94 4.4.4.3 光角為10度時不同曲率半徑的透鏡之影響 95 4.4.5 平面式與曲面式立體影像效果之比較 97 第五章 結論與未來展望 99 5.1 結論 99 5.2 未來展望 101 參考文獻 102 | |
dc.language.iso | zh-TW | |
dc.title | 可撓式柱狀透鏡用於立體印刷影像之研究 | zh_TW |
dc.title | Design of Stereoscopic Images Using the Flexible Lenticular Lens | en |
dc.type | Thesis | |
dc.date.schoolyear | 98-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 林招松(Chao-Sung Lin),楊進丁(Chin-Ting Yang) | |
dc.subject.keyword | PDMS,柱狀透鏡,3D立體影像,光角,Stereoscopic angle, | zh_TW |
dc.subject.keyword | PDMS,Lenticular lens,3-D stereoscopic images,Optical angle,Stereoscopic angle, | en |
dc.relation.page | 104 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2010-07-23 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-99-1.pdf 目前未授權公開取用 | 12.49 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。