請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/44102
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 傅立成 | |
dc.contributor.author | Yen-Yu Chou | en |
dc.contributor.author | 周晏榆 | zh_TW |
dc.date.accessioned | 2021-06-15T02:40:01Z | - |
dc.date.available | 2011-08-14 | |
dc.date.copyright | 2009-08-14 | |
dc.date.issued | 2009 | |
dc.date.submitted | 2009-08-11 | |
dc.identifier.citation | [1] T. Platz, “Evidenzbasierte Armrehabilitation: Eine systematische Literatur ubersicht,” Nervenarzt, Vol. 74, pp. 841–849, 2003.
[2] P. S. Lum, C. G. Burgar, P. C. Shor, M. Majmundar, and M. van der Loos, “Robot-assisted movement training compared with conventional therapy techniques for the rehabilitation of upper limb motor function after stroke,” Arch. Phys. Med. Rehabil., Vol. 83, pp. 952–959, 2002. [3] E. M. Frick and J. L. Alberts, “Combined use of repetitive task practice and an assistive robotic device in a patient with subacute stroke,” Physical Therapy, Vol. 86, pp. 1378–1386, 2006. [4] D. Reinkensmayer, J. L. Emken, and S. C. Cramer, “Robotics, motor learning, and neurological recovery,” Annu. Rev. Biomedical. Eng., Vol. 6, pp. 497–525, 2004. [5] R. Riener, T. Nef, and G. Colombo, “Robot-aided neurorehabilitation for the upper extremities,” Medical & Biological Engineering & Computing, Vol. 43, pp. 2–10, 2005. [6] T. Nef, Riener R. “ARMin—Design of a novel arm rehabilitation robot.” in Proceedings of the 9th International Conference on Rehabilitation Robotics, pp. 57–60, June 2005. [7] Tsagarakis, N.G. and Caldwell, D.G., “Development and control of a physiotherapy and training exercise facility for the upper limb using soft actuators,” in proceedings of the IEEE International Conference on Advanced Robotics, pp. 1092–1097, Portugal, June 2003. [8] Bergamasco, M., Allotta, B., Bosio, L., Ferretti, L., Parrini, G., Prisco, G.M., Salsedo, F., Sartini, G., “An arm exoskeleton system for teleportation and virtual environment applications,” in proceedings of the IEEE International Conference on Robotics and Automation, 1994. [9] Benjuya, N. and Kenney, S.B. “Hybric arm orthosis,” Journal of Prosthetics and Orthotics, Vol.2, No. 2 , pp. 155-163, 1990. [10] Kiguchi, K, and Fukuda, T., “A 3DOF exoskeleton for upper-limb motion assist consideration of the effect of biarticular muscles,” in proceedings of the IEEE International Conference on Robotics and Automation, New Orleans, LA, pp. 2424-2429, 2004. [11] Krebs, H. I., Hogan, N. et al., “Robot-aided neuro-rehabilitation,” IEEE Transaction on Rehabilitation Engineering, Vol.6, pp.75-87, 1998. [12] N.G. Tsagarakis, Darwin G. Caldwell, “A Compliant exoskeleton for multi-planar upper limb physiotherapy and training”, International Journal of the Robotics Society of Japan, Advanced Robotics, Dept. of Electronic Eng., Salford University, 2007. [13] T. Nef, M. Mihelj, G. Colombo, and R. Riener, “ARMin-Robot for rehabilitation of the upper extremities,” in proceedings of the IEEE International Conference on Robotics and Automation, pp. 3152–3157, May 2006. [14] Mihelj, M. Nef, T. Riener, R, “ARMinII-7DOF rehabilitation robot: mechanics and kinematics,” in proceedings of the IEEE International Conference on Robotics and Automation, 2007. [15] J.L. Pons, E.Rocon, A.F. Ruiz, J.C. Moreno, “Upper-limb robotic rehabilitation exoskeleton: tremor suppression,” in Proceedings of the 9th International Conference on Rehabilitation Robotics, pp. 453-470, 2007. [16] A. Frisoli, M. Bergamasco, L. Borelli, A. Montagner, G. Greco, C. Procopio, M. C. Carboncini and B. Rossi, “Robotic assisted rehabilitation in virtual reality with the L-EXOS,” International Conference Series on Disability, Virtual Reality and Associated Technologies, 2008. [17] R.J. Sanchez, J. Y. Liu, S. Rao, P.Shah, R. Smith, T Rahman, S.C. Cramer, J.E. Bobrow, and D. J. Reinkensmeyer, “Functional exercises with quantitative feedback in a gravity-reduced environment,” IEEE Transactions on Neural Systems and Rehabilitation Engineering, Vol. 14, no.3, pp. 378-389, 2006. [18] D. Bertram, J. Kuffner, R. Dillmann and T. Asfour, “An integrated approach to inverse kinematics and path planning for redundant manipulators,” in proceedings of the IEEE International Conference on Robotics and Automation, Orlando, USA, 2006. [19] J. F. Soechting and M. Flanders, “Organization of sequential typing movements,” Journal of Neurophysiology, Vol. 67, No.5, pp.1275-1290, 1992. [20] D.Tolani, A. Goswami and N. I. Badler, “Real-time inverse kinematics techniques for anthropomorphic limbs,” Graphical Models, pp.353-388, 2000. [21] M.S. Ju, C.C. K. Lin, S. M. Chen, I. S. Hwang, P. C. Kung, and Z. W. Wu, “Application of robotics to assessment and physical therapy of upper limbs of stroke patients,” in Proceedings of the 9th International Conference on Rehabilitation Robotics, 2007. [22] FDA U.S. Food and Drug Administration, Title. Product Classification [Online]. Available:http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfPCD/classification.cfm?ID=4428. [23] Irving P. Herman, Physics of the Human Body. New York: Springer-Verlag, ch.1, 2007. [24] D.B. Chaffin, G. B. J. Anderson, Occupational Biomechanics. New York, Wiley, 1984. [25] G. O. Young, “Synthetic structure of industrial plastics (Book style with paper title and editor),” in Plastics, 2nd ed. Vol 3, J. Peters, Ed. New York. McGraw-Hill, pp.15-64, 1964. [26] M. W. Spong, S. Hutchinson, and M. Vidyasagar, “Robot Modeling and Control,” New York: Addison-Wesley, 2006. [27] J. J. Craig, “Introduction to Robotics: Mechanics and Control. Reading,” MA: Addison-Wesley, 1989. [28] B. Armstrong, O. Khatib, and J. Burdick, “The explicit dynamic model and inertial parameters of the puma 560 arm,” in Proceedings of IEEE conference on Robotics and Automation, pp. 510-518, Apr. 1986. [29] A.K Bejczy and Sukhan Lee, “Robot Arm Dynamic Model Reduction for Control,” in Proceedings of 22nd IEEE Conference on Decision and Control, San Antonio, TX, pp. 1466-1476, December 1983,. [30] A. K. Bejczy and R. P. Paul, “Simplified Robot Arm Dynamics for Control,” in Proceedings of the 20th IEEE Conference on Decision and Control, San Diego, . pp 261 -262, Dec. 1981. [31] Hsia, T.C. and Lu, G. Z., “On Simplification of Robot Arm Dynamic Equation,” in Proceedings of IEEE conference on Circuits Systems and Computers, pp. 144-148, Nov.1985. [32] P.I. Corke., “An automated symbolic and numeric procedure for manipulator rigid-body dynamic significance analysis and simplification,” in proceedings of the IEEE International Conference on Robotics and Automation, pp.1018–1023, 1996. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/44102 | - |
dc.description.abstract | 本論文的主要目標是提出一種新的設計平台來幫助病患做復健使他們能漸漸恢復且執行各種生活不可或缺的動作。此機器人平台提供了九個自由度,針對不同部位可分為: 利用六個自由度來控制肩部關節動作,一個自由度來控制肘關節動作,兩個自由度來控制手腕關節運動。其中針對各種病患手長度的不同,有可調機構可供調整。透過這樣的設計,具有高自由度的平台可設計出更多元的復建動作。然而,對於冗餘自由度的平台要設計出想要的動作是很困難的,因此在本論文,我們透過映射人體手臂的運動學模型到機械手臂,如此可找出符合人體關節限制的解,進而避免了規劃錯誤與危險的動作。在做復健的時候, 平台本身利用順滑模式控制器來達成想要的復健動作的軌跡追蹤,並且為了更人性化地方便使用者或物理治療師的使用,在軟體上加入平台的3D模擬器,利用滑鼠點選拖曳來設定想要達到的關節位置,將一連串的設定動作儲存起來以達成動作的排程規劃。 | zh_TW |
dc.description.abstract | The goal of this study is to design a robot system for assisting the rehabilitation of patients so that they can eventually perform various activities of daily living. The robot system which parallels our human upper limb possesses 9 degrees of freedom (DOFs) in total: six at the shoulder joint, one at the elbow joint, and two at the wrist joint. Besides, there are two adjustable segments to fit different arm lengths of different patients. Through the study, it can be seen that the hereby obtained redundant manipulator with high DOFs has a most salient advantage, which is able to provide training to patients closer to the natural human motions. However, it is difficult to determine the desirable posture of a redundant manipulator in such system first of all, and it is more challenging to determine how to attain that particular posture next. In this thesis, we resolve the above problems by mapping the kinematics of a human arm to that of the manipulator so that it can avoid going through the ill-posed configurations while searching for the desired solutions, and then reach the desired rehabilitation motion as precisely as possible. The position control involves position and velocity feedback of the end-effectors, which is implemented with the sliding mode controller to perform the trajectory tracking. In order to schedule the rehabilitation motion easily, it has a 3D simulator for user. The experiment results show that the robot can successfully guide the upper limb of the patient subject in desired movements under predefined motion setting. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T02:40:01Z (GMT). No. of bitstreams: 1 ntu-98-R95921014-1.pdf: 2767532 bytes, checksum: ee08ecb9eccf913bd23e3dc95a66f265 (MD5) Previous issue date: 2009 | en |
dc.description.tableofcontents | 誌謝 I
摘要 II ABSTRACT III Table of Contents V List of Figures VIII List of Tables XII Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Background 3 1.3 Contributions 7 1.4 Organization 7 Chapter 2 System Description 9 2.1 The Mechanical Description of the Rehabilitation Robot 9 2.1.1 Mechanical Design 9 2.1.2 Range of Motion (ROM) of the Robot 13 2.2 Hardware Demand for the Rehabilitation Robot 14 2.2.1 Sensor Componets 16 2.2.2 System Architecture 17 2.3 Safety Issues 18 2.4 Human-machine Interface 21 Chapter 3 Kinematic Model for Robot Arm and Human Arm 24 3.1 Kinematic Model of Robot Manipulators 24 3.2 Human Arm Model 28 3.3 Inverse Kinematics Analysis of Robot Arm System 32 3.3.1 Given Human Arm Configuration 33 3.3.2 The Relationship between Human Arm and Robot Arm 34 3.3.3 Solution of inverse kinematics: , 40 3.3.4 Solution of inverse kinematics: 50 3.3.5 Solution of inverse kinematics: 51 3.3.6 Solution of inverse kinematics: 52 Chapter 4 Motion Control of Robot Manipulator 55 4.1 Joint Velocities - the Manipulator Jacobian 55 4.2 Dynamic Model of Robot Manipulator 61 4.3 Motion Control of Robot Manipulator 69 4.3.1 Computed-torque Motion Control 69 4.3.2 Sliding mode Control 71 Chapter 5 Simulations and Experimental Results 73 5.1 Therapeutic Process via the Robot System 73 5.1.1 Motion patterns for the rehabilitation therapy 74 5.1.2 Training for the Passive Mode 75 5.2 Simulation Description 76 5.2.1 Workspace Analysis for the Robot Arm 77 5.3 Experimental Setup 84 5.3.1 Experimental Description 85 5.3.2 Experimental Results 85 5.3.3 Tracking Shoulder Flexion-Extension Motion 86 5.3.4 Tracking Shoulder Lateral-Medial Motion 91 Chapter 6 Conclusions and Future Work 96 References 97 Appendix A 103 Appendix B 111 B.1 Inertia Coefficients-Symmetric 112 B.2 The Centrifugal matrix 116 B.3 Potential energy 125 B.4 Gravity terms 125 | |
dc.language.iso | en | |
dc.title | 針對上肢治療與訓練型復健機器人之設計及其應用 | zh_TW |
dc.title | Design and Application of the Rehabilitation Robot for Upper Limb Physiotherapy and Training | en |
dc.type | Thesis | |
dc.date.schoolyear | 97-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 陳文翔,陸哲駒,連豐力,陳永耀 | |
dc.subject.keyword | 復健機器人,復健,人體手臂,上肢,治療與訓練, | zh_TW |
dc.subject.keyword | Rehabilitation robot,Rehabilitation,Human arm,Upper limb,Physiotherapy and Training, | en |
dc.relation.page | 126 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2009-08-12 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電機工程學研究所 | zh_TW |
顯示於系所單位: | 電機工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 2.7 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。