請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/42254完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 瞿大雄(Tah-Hsiung Chu) | |
| dc.contributor.author | Jian-Yu Ju | en |
| dc.contributor.author | 朱建宇 | zh_TW |
| dc.date.accessioned | 2021-06-15T00:55:40Z | - |
| dc.date.available | 2008-08-08 | |
| dc.date.copyright | 2008-08-08 | |
| dc.date.issued | 2008 | |
| dc.date.submitted | 2008-08-04 | |
| dc.identifier.citation | [1] J. C. Wiltse, “Corrections to published curves for atmospheric attenuation in the 10 to 1000 GHz region,” 1997 IEEE Antenna and Propagation International Symposium, pp. 2580-2583, July 1997.
[2] D. Deslanded and K. Wu, “Integrated microstrip and rectangular waveguide in planer form,” IEEE Microwave and Wireless Component Letters, vol. 11, no.2, pp.68-70, Feb. 2001. [3] J. C. Liberti and T. S. Rappaport, Smart Antennas for Wireless Communications:IS-95 and Third Generation CDMA Applications, Prentice Hall, 1999. [4] A. Alexiou and M. Haardt, “Smart antenna technologies for future wireless systems: trends and challenges,” IEEE Communication Magazine., vol. 42, no. 9, pp. 90-97, Sept. 2004. [5] D. Deslandes and K. Wu, “Integrated transition of coplanar to rectangular waveguides,” Microwave Symposium Digest, 2001 IEEE MTT-S International, vol.2, pp. 619-622, 2001. [6] F. Xu , Y. Zhang, W. Hong, K. Wu and T. J. Cui, “Finite-difference frequency domain algorithm for modeling guided-wave properties of substrate integrated waveguide,” IEEE Transactions on Microwave Theory and Techniques, vol.51, pp 2221-2227,2003. [7] Y. Cassivi, L. Perregrini, P. Arcioni, M. Bressan, K. Wu and G. Conciauro, “Dispersion characteristic of substrate integrated rectangular waveguide” IEEE Microwave and Wireless Component Letters, vol. 12, no. 9, pp. 333-335, Sep. 2002. [8] C. H. Tseng and T. H. Chu, “Measurement of frequency-dependent equivalent width of substrate integrated waveguide,” IEEE Transactions on Microwave Theory and Techniques, vol. 54, pp.1431-1437, June 2006. [9] X. P. Chen and K. Wu,“Substrate integrated waveguide cross-coupled filter with negative coupling structure,” IEEE Transactions on Microwave Theory and Techniques, vol. 56, pp.142 - 149, Jan. 2008. [10] T. Y. Hong and T. H. We, “Design of a Ka-band bandpass filter based on High order mode SIW resonator,” International Symposium on Antennas, Propagation & EM Theory, pp.1-3, Oct. 2006. [11] D. Deslandes, and K. Wu, “Substrate integrated waveguide dual-mode filters for broadband wireless systems,” Radio and Wireless Conference, pp.385-388, 2003. [12] D. Deslandes and K. Wu, “Millimeter-wave substrate integrated waveguide filters,” Electrical and Computer Engineering, vol.3, pp.1917-1920, 2003. [13] Y. Cassivi, and K. Wu, “ Low cost microwave oscillator using substrate integrated waveguide cavity,” Microwave and Wireless Components Letters, IEEE,Vol.13, pp48-50,Feb. 2003. [14] L. Yan, W. Hong, G. Hua, J. Chen, K. Wu and T. J. Cui, “Simulation and experiment on SIW slot array antennas,” Microwave and Wireless Component Letters, vol. 12, no. 9, pp. 333-335, Sep. 2002. [15] A. Angelucci, P. Audagnotto, P. Corda, P. Obino, F. Piarulli, and B. Piovano, “High performance microstrip networks for multibeam and reconfigurable operation in mobile-radio systems,” IEEE Global Telecommunications Conference, vol.3, pp.1717–1721, 1994. [16] R. Comitangelo, D. Minervini, and B. Piovano,“ Beam forming networks of optimum size and compactness for multibeam antennas at 900 MHz ,” IEEE Antennas and Propagation Society International Symposium, vol.4, pp. 2127-2130, 1997. [18] H. J. Moody, “The systematic design of the butler matrix,” IEEE Transaction on Antennas and Propagation¸ AP-2¸ pp.786-788¸ 1964. [19] H. Hayashi, D. Hitko, and C.G. Sodini, “Four-element planar Butler matrix using half-wavelength open stubs,” IEEE Microwave and Wireless Components Letters, vol.12, pp.73-75, March 2002. [20] W. R. Li, C. Y. Chu, K. H. Lin, and S. F. Chang, “Switched-beam antenna based on modified Butler matrix with low sidelobe level,” Electronics Letters, vol. 40, pp.290-292, March 2004. [21] F. Cladwell, J. S. Jr. Kenney, and I. A. Ingram,“Design and implementation of a switched-beam smart antenna for an 802.11b wireless access point,” Radio and Wireless Conference, 2002. RAWCON 2002. IEEE, pp.55-58, Aug. 2002. [22] H. Uchimura, T. Takenoshita, and M. Fujii, “Development of a “Laminated Waveguide”, IEEE Transactions on Microwave Theory and Techniques, vol.46, no.12, pp.2438-2443, Dec. 1998. [23] D. Deslandes and K. Wu, “Design considerations and performance analysis of substrate integrated waveguide Components”, Milano, European Microwave Conference, pp. 881-884, Sept. 2002. [24] F. Xu and K. Wu,“Guided-wave and leakage characteristics of substrate integrated waveguide,” IEEE Trans. Microwave Theory & Tech., vol. 53, no. 1, pp. 66-73, Jan. 2005. [25] R. S. Elliott, Antenna theory and design, Revised Ed., John Wiley & Sons, 2003. [26] H. Li, W. Hong, T. J. Cui, K. Wu, Y. L. Zhang, and L. Yan, “Propagation characteristics of substrate integrated waveguide based on LTCC” IEEE MTT-S Int. Microwave Symp. Dig., vol. 3, pp 2045-2048, Dec. 2003. [27] H. J. Riblet, “The short-slot hybrid junction,” Proceedings of the I. R. E., vol. 40, no. 2, pp. 180-184, Feb. 1954. [28] C. J. Chen, “Design and measurement of 4x4 millimeter wave SIW Butler matrix,” Ph.D dissertation, CH.2, Graduate Institute of Communication Engineering, National Taiwan University, July 2007. [29] S. Yamamoto, J. Hirokawa, and M. Ando,“A half-sized post-wall short-slot directional coupler with hollow rectangular holes in a dielectric substrate,” IEICE Trans. Electron., vol. 88, no. 7, pp. 1387-1394, July 2005. [30] D. M. Pozar, Microwave Engineering, 3rd Ed., John Wiley & Sons, 2003. [31] E. Hadge, “Compact top-wall hybrid junction ,” IRE, Trans. Microwave Theory Tech. 1, pp. 29-30, 1953. [32] S. Sercu and L. Martens,“Characterizing n-port packages and interconnections with a 2-port network analyzer,” 1997 IEEE 6th Topical Meeting on Electrical Performance of Electronic Packaging, pp. 163-166, October 1997. [33] C. J. Chen and T. H. Chu, “Virtual auxiliary termination for multiport scattering matrix measurement using two-port network analysis,” IEEE Trans. Microwave Theory Tech., vol. 55, no. 8, pp.1801-1810. Aug. 2007. [34] J. C. Liberti and T.S. Rappaport, Smart Antennas for Wireless Communications: IS-95 and Third Generation CDMA Applications, Prentice Hall, 1999. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/42254 | - |
| dc.description.abstract | 本篇論文主要敘述使用基板合成波導結構，製作兩種不同結構的3dB耦合器與巴特勒矩陣。兩種耦合器結構分別為側邊開槽耦合器與上方開槽耦合器，並用Roger RT/duroid 5880®板材製作，最後利用此兩種耦合器結構研製一四乘四巴特勒矩陣，設計之電路頻率為60GHz。基板合成波導因具有低損耗特性，目前已漸廣泛應用於微波與毫米波電路設計，並可利用簡單的轉接結構，將設計之電路整合在一片基板上。
本論文各章節先整理敘述各元件之設計公式，以得到各電路設計初始值，再利用美商恩碩公司Ansoft HFSS®軟體模擬各電路結構，並依據模擬結果，利用Roger RT/duroid 5880® 10mil板厚之雙層板，分別製作基板合成波導之側邊開槽耦合器、上方開槽耦合器與四乘四巴特勒矩陣。 本論文共分五個章節。第一章為簡介，說明研究動機與相關文獻，並簡介各章內容。第二章敘述基板合成波導結構與特性。第三章則利用基板合成波導結構設計側邊開槽耦合器與上方開槽耦合器結構，並敘述設計公式與原理，以及在量測多埠網路電路時，所會面臨的問題與考量。第四章則敘述使用第三章所設計之3dB耦合器，研製基板合成波導四乘四巴特勒矩陣。最後針對本論文的研究成果，於第五章總結。 | zh_TW |
| dc.description.abstract | In this thesis, two different structures of 3dB couplers and a 4 x 4 Butler matrix using substrate integrated waveguide (SIW) are designed. The two couplers, a short-slot coupler and a top-wall coupler, are fabricated on Roger RT/duroid 5880® substrate. In addition, the 3db couplers are used to realize a 4 x 4 Butler matrix. The circuits are designed at 60GHz. SIW is a known structure to have the characteristics of low loss and can be easily integrated with other planar circuits on a single printed circuit board (PCB) for microwave and millimeter-wave components.
The circuit simulation is performed by using Ansoft HFSS® 10.0 along with initial parameters calculated by the design formulas given in each chapter. Based on the simulation results, a short-slot coupler, a top-wall coupler and a 4x4 Butler matrix are implemented on a double layered Roger RT/duroid 5880® with 10mil thickness. This thesis is composed of five chapters. In Chapter 1, study motivation and paper survey are presented. Chapter 2 reveals the characteristics and structure of SIW. Chapter 3 describes the formulas to design a short-slot coupler and a top-wall coupler using SIW structure. Problems and considerations related to multi-port circuit measurement are also discussed. Using the 3dB couplers designed in Chapter 3, a 4x4 Butler matrix is designed with measured results in Chapter 4. Finally, this research study is concluded with Chapter 5. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-15T00:55:40Z (GMT). No. of bitstreams: 1 ntu-97-R95942074-1.pdf: 1458437 bytes, checksum: 68678999264596e6316d8e8ee047135a (MD5) Previous issue date: 2008 | en |
| dc.description.tableofcontents | 目錄
摘要．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．i 目錄 ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．． ．v 圖表目錄 ．．．．．．．．．．．．．．．．．．．．．．．．．．．． vii 第一章 簡介．．．．．．．．．．．．．．．．．．．．．．．．．．．．1 1-1 研究動機 ．．．．．．．．．．．．．．．．．．．．．．．．．．1 1-2 相關研究 ．．．．．．．．．．．．．．．．．．．．．．．．．．3 1-3 章節內容概述 ．．．．．．．．．．．．．．．．．．．．．．．．3 第二章 基板合成波導．．．．．．．．．．．．．．．．．．．．．．．4 2-1 基板合成波導介紹．．．．．．．．．．．．．．．．．．．．．．4 2-1-1 損耗特性．．．．．．．．．．．．．．．．．．．．．．．．5 2-1-2 色散特性．．．．．．．．．．．．．．．．．．．．．．．．6 2-1-3 平面電路與基板合成波導之轉接結構．．．．．．．．．．．．7 2-2 基板合成波導等效寬度．．．．．．．．．．．．．．．．．．．．9 2-2-1電路模擬．．．．．．．．．．．．．．．．．．．．．．．．11 2-2-2 量測結果．．．．．．．．．．．．．．．．．．．．．．．．14 第三章 基板合成波導方向耦合器 ．．．．．．．．．．．．．．．．17 3-1 電路設計．．．．．．．．．．．．．．．．．．．．．．．．．．17 3-1-1 側邊開槽耦合器．．．．．．．．．．．．．．．．．．．．．18 3-1-2 上方開槽耦合器．．．．．．．．．．．．．．．．．．．．．21 3-2 模擬結果．．．．．．．．．．．．．．．．．．．．．．．．．．24 3-2-1 側邊開槽耦合器．．．．．．．．．．．．．．．．．．．．．24 3-2-2 上方開槽耦合器．．．．．．．．．．．．．．．．．．．．．27 3-3 側邊開槽耦合器量測考量．．．．．．．．．．．．．．．．．．．30 3-4 側邊開槽耦合器量測結果．．．．．．．．．．．．．．．．．．．34 第四章 四乘四巴特勒矩陣研製．．．．．．．．．．．．．．．．．．40 4-1 矩陣介紹．．．．．．．．．．．．．．．．．．．．．．．．．．40 4-2 電路設計．．．．．．．．．．．．．．．．．．．．．．．．．．45 4-3 模擬結果．．．．．．．．．．．．．．．．．．．．．．．．．．49 4-4 量測結果．．．．．．．．．．．．．．．．．．．．．．．．．．63 第五章 結論 ．．．．．．．．．．．．．．．．．．．．．．．．．．．75 附錄A ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．79 附錄B ．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．84 參考文獻．．．．．．．．．．．．．．．．．．．．．．．．．．．．．89 | |
| dc.language.iso | zh-TW | |
| dc.subject | 巴特勒矩陣 | zh_TW |
| dc.subject | 側邊開槽耦合器 | zh_TW |
| dc.subject | 上方開槽耦合器 | zh_TW |
| dc.subject | short-slot coupler | en |
| dc.subject | Butler matrix | en |
| dc.subject | top-wall coupler | en |
| dc.title | 使用基板合成波導之60GHz四乘四巴特勒矩陣之研製 | zh_TW |
| dc.title | Design of 4 x 4 60GHz SIW Butler Matrix | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 96-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 鄧維康(Wei-Kang Deng),陳宗志(Tzung-Jr Chen),王臺模(Tai-Mo Wang) | |
| dc.subject.keyword | 側邊開槽耦合器,上方開槽耦合器,巴特勒矩陣, | zh_TW |
| dc.subject.keyword | short-slot coupler,top-wall coupler,Butler matrix, | en |
| dc.relation.page | 92 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2008-08-05 | |
| dc.contributor.author-college | 電機資訊學院 | zh_TW |
| dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
| 顯示於系所單位： | 電信工程學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-97-1.pdf 未授權公開取用 | 1.42 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。