Please use this identifier to cite or link to this item:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41043Full metadata record
| ???org.dspace.app.webui.jsptag.ItemTag.dcfield??? | Value | Language |
|---|---|---|
| dc.contributor.advisor | 呂學士(Shey-Shi Lu) | |
| dc.contributor.author | Tse-Yuan Chen | en |
| dc.contributor.author | 陳澤源 | zh_TW |
| dc.date.accessioned | 2021-06-14T17:13:33Z | - |
| dc.date.available | 2013-08-05 | |
| dc.date.copyright | 2008-08-05 | |
| dc.date.issued | 2008 | |
| dc.date.submitted | 2008-07-25 | |
| dc.identifier.citation | [1] G. PULSE Co., Ltd, [online] http://www.gpulse.com/
[2] H. Yu, K. Najafi, “Low-Power Interface Circuits for Bio-Implantable Microsystems,“ ISSCC 2003 / SESSION 11 / MICROSENSORS AND BIOMEMS / PAPER 11.2 [3] Kocer, F. and Flynn, M.P., “A new transponder architecture with on-chip ADC for long-range telemetry applications” IEEE Journal of Solid State Circuits, vol. 41, no. 5, pp. 1142-1148, May. 2006. [4] U. Karthaus and M. Fischer, “Fully integrated passive UHF RFID transponder IC with 16.7-/spl mu/W minimum RF input power,” IEEE Journal of Solid State Circuits, vol. 38, no. 10, pp. 1602-1608, Oct. 2003. [5] K. Finkenzeller, RFID Handbook, Radio-Frequency Identifications Fundamentals and Applications, 2nd ed. New York: Wiley,2003. [6] 唐震寰, “RFID 國際技術發展現況及未來趨勢”, 國立交通大學電信工程學系 專題報告, 2004. [7] http://www.fcc.gov/oet/info/rules/part15/part15-9-20-07.pdf [8] http://www.epcglobalinc.org/standards/TagClassDefinitions_1_0-whitepaper-200711 01.pdf [9] Electronics Communications, ISBN# [ 22A1982 ]. [10] Y. Yao, Y. Shi and F. F. Dai, 'Anovel low-power input-independent MOS AC/DC charge pump,' Proc. of IEEE ISCAS, vol.1, pp. 380-383, May2005. [11] J. Yi, W. H. Ki, and C. Y. Tsui, “Analysis and design strategy of UHF micro-power CMOS rectifiers for micro-sensor and RFID applications,” IEEE Trans. Circuits Syst. I. Reg. Papers, vol. 54, no. 1, pp.153–166, Jan. 2007. [12] H. San, H. Kobayashi, T. Myono, T. lijima, and N. Kuroiwa, “High-Efficient Low-Voltage-Operation Charge Pup Circuits Using Boostrapped Gate Transfer Switches,” T. IEE Japan, Vol. 120-C, NO.10, 2000 [13] J.S Brugler, “Theoretical Performance of Voltage Multilier Circuits”, IEEE Journal of Solid-State Circuits, pp.132-135, Jun.1971. [14] Behzad Razavi, Design of Analog CMOS Integrated Circuits, Xi’an Jiaotong University Press, China, Feb. 2003. [15] R. Jocob Baker, Harry W. Li, David E. Bouce, CMOS Integrated Circuits, Xi’an Jiaotong University Press, China, Feb. 2003. [16] Dennis Roddy, John Coolen, Electronic Communications, pp.272-276. Englewood Cliffs, NJ: Prentice-Hall, 1995. [17] Chi-Wei Tseng, “Wireless Bio-Medical Integrated Chip,” Master thesis, Graduate Institute of Electronics Engineering, National Taiwan University. [18] Y.T. Lin, T. Wang, S. S. Lu, and G. W. Huang, 'A 0.5 V 3.1 mW Fully Monolithic OOK Receiver for Wireless Local Area Sensor Network,' 'IEEE International Asian Solid-State Circuit Conference, Hsin-Chu, Nov. 2005. [19] J. –P. Curty, N. Joehl, C. Dehollain and M. J. Declercq, “Remotely Powered Addressable UHF RFID Integrated System,” IEEE J. Solid-State Circuits, vol.40, no. 11, pp.2193-2202, Nov. 2005. [20] Hsia, Meng-Lin; Tsai, Yu-Sheng; Chen, Oscal T-C.”An UHF Passive RFID Transponder Using A Low-Power Clock Generator without Passive Components” Circuits and Systems, 2006. MWSCAS '06. 49th IEEE International Midwest Symposium onVolume 2, 6-9 Aug. 2006 Page(s):11 - 15 Digital Object Identifier 10.1109/MWSCAS.2006.382195 [21] http://www.epcglobalinc.org/home | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41043 | - |
| dc.description.abstract | In recent years, the applications of wireless communication become more and more important. Wireless communication plays an essential role in our daily lives. The market of the wireless applications grows up gradually. The demands of the wireless products also increase rapidly. Therefore, the miniaturization and low costs will be the first topic we are interested in.
In this thesis, We use the process of TSMC 1P6M 0.18um Mixed signal/RF CMOS to achieve the whole 915MHz UHF RFID passive tag circuit which consists of the multiplier, limiter, voltage reference, series regulator, demodulator modulator and digital signal process. The die area only requires 0.98146 x 0.27396 mm2 without pads. We present dual antenna architecture to increase the backscatter signal strength and try to decrease the power consumption for improved the reading distance between the reader and tag in this thesis. The experimental results show the passive tag can generate 1.5V through the incoming RF signal to power up other internal circuits. The farthest reading distance that we measured in anechoic chamber is approximate 3.5 meters. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-14T17:13:33Z (GMT). No. of bitstreams: 1 ntu-97-J95921021-1.pdf: 4530036 bytes, checksum: c3f6dd9dbd438498ccc8798d99a7864c (MD5) Previous issue date: 2008 | en |
| dc.description.tableofcontents | Chapter 1 Introduction…………………………………………1
1.1 Motivation………………………………………………1 1.2 Thesis Organization……………………………………………………4 Chapter 2 Radio Frequency Identify System Overview………5 2.1 Introduction……………………………………………5 2.2Components of the RFID System……………………………………………………6 2.3Frequency and Standard of the RFID System……………………………………8 2.4 RFID System Research………………………………………12 Chapter3 Design of the 915MHz UHF RFID Passive Tag Circuit……………………………………15 3.1 Introduction……………………………………15 3.2 Architecture……………………………………………17 3.2.1 Charge Pump Circuit………………………………18 3.2.1.1 Voltage Multiplier circuit………………………………19 3.2.1.2 Limiter & Voltage Reference circuit………………………………24 3.2.1.3 Series Regulator circuit……………………………27 3.2.2 Demodulator Circuit………………………………………28 3.2.3 Modulator Circuit…………………………………30 3.2.4 Digital Signal Process Circuit…………………………………………31 3.3 Simulation Result…………………………………………32 3.3.1 Voltage Multiplier Circuit………………………………………32 3.3.2 Limiter & Voltage Reference Circuit…………………………………34 3.3.3 Series Regulator Circuit……………………………………36 3.3.4 Charge Pump Circuit……………………………38 3.3.5 Demodulator Circuit………………………………………………………40 3.3.6 Modulator Circuit…………………………………42 3.3.7 Digital Signal Process Circuit…………………45 3.3.8 Whole Circuit…………………………………………………………46 3.4 Power Consumption & Conversion Efficiency Simulation Result……………………………………48 3.5 Summary……………………………………………50 Chapter 4 Measurement Result…………………………51 4.1 The RF Front-End Circuit of the 915MHz UHF RFID Passive Tag (T18-97A)……………………………51 4.1.1 Architecture…………………………………………51 4.1.2 Matching Circuit…………………………………………………………53 4.1.3 Measurement Results……………………………………………………54 4.1.4 Summary……………………………………………………………63 4.2 915MHz UHF RFID Tag (T18-97B)…………………………………………64 4.2.1 Architecture……………………………………64 4.2.2 Matching Circuit……………………………………………………………65 4.2.3 Measurement Result…………………………………………………………66 4.2.4 Summary………………………………………………………………74 Chapter 5 Conclusion…………………………………………75 Appendix A Patent Search and Analysis………………………77 Reference………………………………………………………………83 | |
| dc.language.iso | en | |
| dc.title | 915MHz 射頻辨識系統之被動式標籤電路實現 | zh_TW |
| dc.title | Passive Tag Circuit of 915MHz RFID System | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 96-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 孟慶宗,孫台平,林佑昇,陳筱青 | |
| dc.subject.keyword | 射頻辨識系統,標籤, | zh_TW |
| dc.subject.keyword | RFID system,Tag, | en |
| dc.relation.page | 85 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2008-07-28 | |
| dc.contributor.author-college | 電機資訊學院 | zh_TW |
| dc.contributor.author-dept | 電機工程學研究所 | zh_TW |
| Appears in Collections: | 電機工程學系 | |
Files in This Item:
| File | Size | Format | |
|---|---|---|---|
| ntu-97-1.pdf Restricted Access | 4.42 MB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.