請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40684完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 范光照 | |
| dc.contributor.author | Yo-Sheng Lin | en |
| dc.contributor.author | 林友聖 | zh_TW |
| dc.date.accessioned | 2021-06-14T16:55:53Z | - |
| dc.date.available | 2009-08-04 | |
| dc.date.copyright | 2008-08-04 | |
| dc.date.issued | 2008 | |
| dc.date.submitted | 2008-07-29 | |
| dc.identifier.citation | [1] L. D. Dickson, “Ronchi ruling method for measuring Gaussian beam diameter”, Opt. Eng.,v18,n1,pp70-75,1979
[2] M. A. Karism,A.A.S.Awwal, A. M. Nasiruddin, A. Basit, D. S. Vedak,C. C. Smith ,and G. D. Miller, “Gaussian laser-beam-diameter measurement using sinusoidal and triangular rulings”, Opt. Lett.,v12,n2,pp93-95,1987 [3] M. A. Karim, “Measurement of Gaussian beam diameter using Ronchi rulings”, Elextron. Lett.,v21,pp427-429,1985 [4] A. K. Cherri,A.A.S. Awwal, and M. A. Kari, “Generalization of the Ronchi,sinusoidal,and triangular rulings for Gaussian-laser-beam-diameter measurements”, Appl. Opt.,v32,n13,pp2235-2242,1993 [5] Abdallak K. Cheri and Abdul Ahad S. Awwal, “Periodic exponential ruling for the measurement of Gaussian laser beam diameters”,Opt. Eng.,v32,n5,pp1038-1042,1993 [6] P. J. Brannon, J. P. Anthes, G. J. Cano,and J.E.Pewell , J.Appl . Phys , v46 , n8, pp3576-3579,1975 [7] P. J. Shayler, “Laser beam distribution in the focal region”,Appl. Opt. , v17,n17, pp2673-2674,1978 [8] H. Kogelnik, Bell, Syst. J.,v44,pp455,1965 [9] LASER BEAM ANALYZING SYSTEMS Model PC – Beamscope , Merchantek , Inc., CA USA,1993 [10] R. L.McCally, “Measurement of Gaussian beam parameters”,Appl. Opt.,v23,n14, pp2227,1984 [11] A. YOSHIDA and T. ASAKURA, “A simple technique for quickly measuring 53 the spot size of Gaussian laser beams” ,Opt. Laser Technol.,v8,pp273-274,1976 [12] M. Mauck, “Knife-edge profiling of Q-switched Nd:YAG laser beam and waist”, Appl. Opt.,v18,n5,pp599-600,1979 [13] J. M. Khosrofian and B. A. Garetz, “Measurement of a Gaussian laser beam diameter through the direct inversion of knife-edge data”,Appl. Opt.,v22,n21, pp3406-3410,1983 [14] Optical Profile SpotScan Model 0390,Photon,Inc.,CA USA,1990 [15] Laser Beam Analyzer & beam profilers,MELLES GRIOT,1993 [16] B. J. Pernick, “Two-dimensional light-distribution measurement with a 90 cornered knife edge”, Appl. Opt.,v32,n19,pp3610-3613,1993 [17]柳政良,'利用90度刀緣掃描量測高斯光束強度分佈之量測系統”,國立彰化師範大學工業教育研究所碩士論文,1994 [18] J. W. Greve and F.W. Wilson, “Handbook of Industrial Metrology, ” Printice-Hall, Inc., 1967. [19] M.M. Weck, “Geometric and kinematic errors, ” Technol. Machine Tools, Vol. 5, pp9-12, 1980. [20] P.A. Hickman, “Optical Tilting Viewed in a New Light, ” Laser Focus, Vol. 4, No.5, pp22, 1968. [21] A.B.Herrmannsfeldt, et al., ”Precision Alignment Using a System of Large Rectangular Fresnel Lenses, ” Applied Optics, Vol. 7, pp995, 1968. [22] C. Chou et al., “CCD based CMM geometrical error measurement using Fourier phase shift algorithm, ”Int. J. of Machine Tool and Manufacture, Vol. 37, pp480-482, 1991. [23] R.J. King and K.W. Raine, “Polarimetry Applied to Alignment and Angle Measurement, ” Optical Engineering, Vol. 201, pp39-43, 1981. [24] J. Ni, P.S. Hiang, S.M. Wu, “A multi-degree-of-freedom measurement system 54 for CMM geometric errors, ” J. Engng Ind., Trans. ASME, Vol. 114, pp362-369, 1992. [25] S.G. Ye and Y.Z. Fan, “A New Method to Improve the Alignment Precision, ” Proceedings of the IMEKO TC, No.14, Budapest, Hungary, 1986. [26] Using Material Temperature Compensation to Improve Laser Interferometer Measurement Accuracy, Application Note 325-20, Hewlett Packard Co., 1993. [27] S. Shimizu, H.S. Lee, N. Imai, “Simultaneous measuring method of the table motion errors in 6 degrees of freedom, ”Int. J. Japan Soc. Prec. Engng, Vol. 28, pp273-274, 1994. [28] J.H. Guo, X.G. Cheng, C.Y. Yin, “Aplication of adaptive principle on laser straightness systems, ” Journal of Tsinghua University (Sci & Tech), Vol. 37, pp21-23, 1997. in Chinese. [29] Y.J. Sohn, J.H. Kwon, O.S. Choe, “Portable autocollimators using the laser diode and the position sensitive detector, ” Review of Scientific Instruments, Vol. 69, No. 2, pp402-405, 1998. [30] T R Armstrong and M P Fitzgerald, “An Autocollimator Based on the Laser Head of a Compact Disc Player, ” Measurement Science, Vol. 3,pp1072-1076, 1992. [31] K.C. Fan and Y. Zhao, “A Laser Straightness Measurement System Using Optical Fiber and Modulation Technique, ” Int. J. of Machine Tool and Manufacture, Vol.40, pp2073-2081, 2000. [32] K. C. Fan, C. Y. Lin, and L. H. Shyu, “Development of a Low-cost Focusing Probe for Profile Measurement, ” Measurement Science and Technology, Vol. 11, No. 1, pp1-7, 2000. [33] J. Benschop and G. V. Rosmalen, “Confocal Compact Scanning Optical Microscope based on Compact Disc Technology, ” Applied Optics, Vol. 30, No. 55 10, pp1179-1184, 1991. [34] W.D. Zhou and L.L. Cai, “A positioning method for hard disk servowriter using an auto focus laser encoder, ”Proceedings of the 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Atlanta, USA, 1999. [35] A.H. Firester, M.E. Heller, P. Sheng, “Knife-edge scanning measurements of subwavelength focused light beams, ” Applied Optics, Vol. 16. No. 7, pp1971-1974, 1977. [36] J.M. Khosrofian and B.A. Garetz, “Measurement of a Gaussian laser beam diameter through the direct inversion of Knife-edge data, ” Applied Optics, Vol. 22, No. 21, pp3406-3410, 1983. [37] P.J. Cronin, P.W. Fekete, M.R. Arnison, C.J. Cogswell, “Characterization of an open-loop controlled scanning stage using a knife edge optical technique, ” Review of Scientific Instruments, Vol. 71, No. 1, pp118-123, 2000. [38] K.C. Fan “Laser straightness measurement system using optical fiber and modulation techniques, ” International Journal of Machine Tools and Manufacture, Vol.40, No.14, pp2073-2081, 2000. [39] Armstrong, T. R. “Autocollimator based on the laser head of a compact disc player, ” Measurement Science & Technology, Vol.3, No.11, pp1072-1076, 1992. [40] Jabczynski, J. K. “Optoelectronic sensor of two-dimensional angular displacements: idea and preliminary test results, ” Proceedings of SPIE - The International Society for Optical Engineering , Vol.2634, pp112-116, 1995. [41] Gao, Wei “New multiprobe method of roundness measurements. ” Precision Engineering, Vol.19, No.1, pp 37-45, 1996. [42] Ehrmann, Klaus “ 3D optical profilometer using a compact disc reading head. ” Measurement Science & Technology, Vol.9, No.8, pp 1259-1265, 1998. 56 [43] Gao, Wei “A compact and sensitive two-dimensional angle probe for flatness measurement of large silicon wafers. ” Precision Engineering, Vol.26, No.4, pp 396-404, 2002. [44] Gao, Wei “Precision measurement of two-axis positions and tilt motions using a surface encoder. ”CIRP Annals - Manufacturing Technology, Vol.52, No.1, pp 435-438, 2003. [45] Gao, Wei. “A precision angle sensor using a multi-cell photodiode array. ”CIRP Annals - Manufacturing Technology, Vol.53, No.1, pp 425-428, 2004. [46] Shimizu, Hiroki “An electrical pen for signature verification using a two-dimensional optical angle sensor. ”Sensors and Actuators, A: Physical, Vol.111, No.2, pp 216-221, 2004. [47] Saito, Yusuke “A micro-angle sensor based on laser autocollimation.” Proceedings of SPIE - The International Society for Optical Engineering, Vol.6052, pp 60520-60520, 2005. [48] Chu, Chih-Liang “Two-dimensional optical accelerometer based on commercial DVD pick-up head ” ,Measurement Science and Technology, Vol.18, No.1, pp 265-274, 2007. [49] HERMANN A, HAUS ,”WAVES AND FIELDS IN OPTOELECTRONICS”, CENTRAL BOOK PUBLISHING CO.,1985 [50] R. A. Linke, L. Kasper, C. A. Burrus, Jr.,I. P. Kaminow, J-S.Ko, and T. P. Lee., “Mode power partition events in nearly single frequency lasers”, J. Lightware Technol.,v. LT-3, pp706-711, 1985 [51] P. L. Liu. and K. Ogawa, “Statistical measurements as a way to study mode partition in injection lasers”, J. Lightware Technol.,v. LT-2, pp44-48, 1984 [52] P. A. Andrekson, P. Andersson and A. Alping , “ Electrical Noise Measurements on Laser Diodes for Monitoring of Optical Feedback and Mode 57 Hopping ”,Electron. Lett., Vol.22, no.4,pp195-196 ,1986 [53] Biesterbos, J.W.M., A.J.D.Boef, W.Linders and G.A. Acket, “Low-Frequency Mode-Hopping Optical Noise in AlGaAs Channeled Substrate Lasers Induced by Optical Feedback”,IEEE Journal of Quantum Electronics, Vol.19, no.6,pp986-990 ,1983 [54] J. Mork, M. Semkow and B. Tromborg, “ Measurement and Theory of Mode Hopping in External Cavity Lasers”, Electron.Lett. ,Vol.26, no.9, pp609-610, 1990 [55] 吳至中,楊聰明, “ 磁光式光碟機之雷射二極體雜訊',光電資訊季刊, Vol.4, no.4,1992 [56] 陳榮智, “ 半導體雷射在正交偏振回饋下之單縱模特性及模躍遷雜訊的研究',國立中山大學物理研究所碩士論文,1995. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40684 | - |
| dc.description.abstract | 在本研究中，主要是以DVD光學讀取頭為基礎，將前方之聚焦透鏡拆除，使DVD光學讀取頭投射出一道準直光。因而，當待測物其反射面產生角度偏擺時，由光感測器得到之訊號，經過DSP處理之後，直接透過LCD顯示，即可得到角度的偏擺量。且因DVD光學讀取頭可量測雙軸之角度變化量，故可將DVD設計成一雙軸電子水平儀。若結合刀緣法，更可讓DVD光學讀取頭量測移動物體的直線度以及雙軸間之平行度。此次實驗另一重點就是全系統不透過電腦，僅使用單晶片做運算及處理。 | zh_TW |
| dc.description.abstract | DVD pick-up head is the backbone in our research. We remove the focusing Lens from the DVD pick-up head to collimate light. When the reflection of the object produce make a angle, there are signals got from photo detect. After the processing of DSP, the angle could be computed and displayed using LCD. A two dimension electronic level could be designed according to the variations of angle measure by DVD pick-up head. Straightness of the two axis of the moving object could be measured if knife edge is combined. The other major point of our experiment is that microchip is used to calculate and process in our system without using computer. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-14T16:55:53Z (GMT). No. of bitstreams: 1 ntu-97-R95522722-1.pdf: 1570976 bytes, checksum: 3a89f2a027a8559626d7a9836002b275 (MD5) Previous issue date: 2008 | en |
| dc.description.tableofcontents | 第一章 緒論 1
1-1研究動機與目的 1 1-2相關論文回顧 1 1-2-1 各種掃瞄光束方式的比較 1 1-2-2 真直度量測儀器介紹 3 1-2-3 角度量測介紹 5 1-3 論文結構概述 6 第二章 量測原理 6 2-1實驗量測探頭簡介 7 2-1-1 DVD讀取頭應用原理 7 2-1-2四象限感測器 9 2-2 雷射光束掃瞄量測原理 11 2-2-1 雷射光束光強度分佈量測 11 2-2-2角度量測原理 13 2-2-3單刀緣掃瞄量測原理 14 第三章 量測系統架設與性能分析 17 3-1 DVD雷射光束分析 17 3-1-1 半導體雷射特性曲線 17 3-1-2 半導體雷射的雜訊 18 3-1-2-1 雷射雜訊的主要來源 19 3-2雷射功率之影響 20 3-2-1 APC回饋控制原理 21 3-2-2 即時正規化訊號法 22 3-3雷射光束量測系統架設與系統校正 23 3-3-1 量測結果 24 3-4 角度量測系統架設與系統校正 27 3-4-1 量測結果 27 3-7 本章小結 29 第四章 單晶片 31 4-1單晶片簡介 31 4-2 取樣頻率之考量 32 4-3 系統方塊圖 35 4-4 本章小結 35 第五章 刀緣法量測之應用 36 5-1 前言 36 5-2 2.5D量測儀(光學投影儀)真直度量測 36 5-2-1 量測系統架構 36 5-2-2 量測結果 37 5-3 精密CNC銑床真直度量測 38 5-3-1 量測系統架構 38 5-3-2 量測結果 39 5-5 本章小結 40 第六章 角度量測之應用 41 6-1 前言 41 6-2 2.5D量測儀(光學投影儀)角度量測 41 6-2-1 量測系統架構 41 6-2-2 量測結果 42 6-3 精密CNC銑床真直度量測 43 6-3-1 量測系統架構 43 6-3-2 量測結果 44 6-4 電子水平儀 45 6-4-1 電子水平儀之設計 45 6-4-2 電子水平儀之測試 46 6-4-3 量測結果 47 6-6 本章小結 48 第七章 結論與討論 50 7-1 結論 50 7-2 討論 51 參考文獻 53 | |
| dc.language.iso | zh-TW | |
| dc.subject | 自動視準儀 | zh_TW |
| dc.subject | DVD讀寫頭 | zh_TW |
| dc.subject | DVD pick-up head | en |
| dc.subject | autocollimator | en |
| dc.title | DVD探頭之應用-自動視準儀 | zh_TW |
| dc.title | Application of DVD Pick-up Head-Autocollimator | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 96-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 朱志良,修芳仲 | |
| dc.subject.keyword | DVD讀寫頭,自動視準儀, | zh_TW |
| dc.subject.keyword | DVD pick-up head,autocollimator, | en |
| dc.relation.page | 58 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2008-07-30 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
| 顯示於系所單位： | 機械工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-97-1.pdf 未授權公開取用 | 1.53 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。