請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40424
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃美嬌(Mei-Jiau Huang) | |
dc.contributor.author | Pai-Yu Hsiao | en |
dc.contributor.author | 蕭百佑 | zh_TW |
dc.date.accessioned | 2021-06-14T16:47:16Z | - |
dc.date.available | 2008-08-06 | |
dc.date.copyright | 2008-08-06 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-30 | |
dc.identifier.citation | [1] Ford R., Suryanarayana N.V., and Johnson J.H., Heat-transfer model for solid-slab/water-cooled skid pipe in reheat furnace, Ironmaking and Steelmaking 3, 140-146, 1980.
[2] Zongyu L., Barr P.V., and Brimacombe J.K., Computer simulation of the slab reheating furnace, Canadian Metallurgical Quarterly 27, 187-196 (1988). [3] Lindholm D. and Leden B., A finite element method for solution of the three-dimensional time-dependent heat-conduction equation with application for heating of steels in reheating furnaces, Numer. Heat Transfer A35, 155-172 (1999). [4] Chapman K.S., Ramadhyani S., and Viskanta R., Two-dimensional modeling and parametric studies of heat transfer in a direct-fired furnace with impinging jets, Combust. Sci. and Tech. 97, 99-120 (1994). [5] Zhang C., Ishii T., and Sugiyama S., Numerical modeling of the thermal performance of regenerative slab reheat furnaces, Numer. Heat Transfer 32, 613-631 (1997). [6] Uede M., Tanaka K., Imada M., and Murakami K., The optimization for the reheating furnace with the technique of the highly preheated air combustion, Proc. Int. Joint Power Generation Conference 2000-15082. [7] Liu M.S., Choi C.K., and Leung C.W., Startup analysis of oil-fired furnace – the smoothing Monte Carlo model approach, Heat and Mass Transfer 37, 449-457 (2001). [8] Kim J.G. and Huh K.Y., Three-dimensional analysis of the walking-beam-type slab reheating furnace in hot strip mills, Numer. Heat Transfer A38, 589-609 (2000). [9] Kim J.G. and Huh K.Y., Prediction of transient slab temperature distribution in the re-heating furnace of a walking-beam type for rolling of steel slabs, ISIJ Inter. 40, 1115-1123 (2000). [10] Maki A.M., Osterman P.J., and Luomala M.J., Numerical study of the pusher-type slab reheating furnace, Scandinavian J. Metallurgy 31, 81-87 (2002). [11] Tang Y., Laine J., Fabritius T., and Harkki J., The modeling of the gas flow and its influence on the scale accumulation in the steel slab pusher-type reheating furnace, ISIJ Int. 43, 1333-1341 (2003). [12] Hsieh C.T., Huang M.J., Lee S.T., Wang C.H, Numerical modeling of a walking-beam-type slab reheating furnace, Numer. Heat Transfer A53, 966-981(2008). [13] Hsieh C.T., Huang M.J., Lee S.T., Wang C.H, A coupled numerical study of slab temperature and gas temperature in the walking-beam-type slab reheating furnace, Numer. Heat Transfer A, May, 2008 accepted. [14] Bilger R.W., Turbulent jet diffusion flames, Prog. Energy Combust. Sci. 1, 87-109 (1976). [15] Libby P.A. and Williams F.A., Turbulent reacting flows, Academic Press (1994). [16] Star-CD 3.2 Methodology, Computational. Dynamics, 2004. [17] Siegel R. and Howell J., Thermal radiation heat transfer, Taylor & Francis, 4th ed. (2002). [18] Modest M.F., The weighted-sum-of-gray-gases model for arbitrary solution methods in radiative transfer, J. Heat Transfer 113, 650-656 (1991). [19] Snegirev A.Yu., Statistical modeling of thermal-radiation transfer in natural-convection turbulent diffusion flames. 1. Model Construction, J. Engr. Phys. Thermophys. 76, 287-298 (2003). [20] Smith T.F., Shen Z.F., and Friedman J.N., Evaluation of coefficients for the weighted sum of gray gases model, J. Heat Transfer 104, 602-608 (1982). [21] Marracino B. and Lentini D., Radiation modeling in non-luminous nonpremixed turbulent flames, Combust. Sci. and Tech. 128, 23-48 (1997). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40424 | - |
dc.description.abstract | 本論文針對中國鋼鐵公司現有的扁鋼胚加熱爐,利用CD asapco公司之商用計算流體力學軟體Star-CD,建立一個三維熱流場模型。採用的數學模式包括:高雷諾數的k-ε紊流模式,單一擴散係數、瞬間反應(反應速率無窮大)之PPDF(Prescribed Probability Density Function)燃燒化學反應模式,並且考慮由高溫燃燒所造成的熱輻射模式。其中熱輻射傳遞方程式採用離散座標法(DOM,Discrete Ordinate Method)求解,用來計算能量方程式中的輻射熱通量;而氣體的輻射吸收係數則用WSGGM(Weighted-Sum-of-Gray-Gases Model)求得。
文中的熱流場模型採非耦合法計算。即先假設鋼胚表面溫度為已知,用來當作加熱爐內的爐氣熱流場,因此計算出鋼胚表面熱通量。接著建立一鋼胚模型,將加熱爐求得的鋼胚表面熱通量當作鋼胚模型的邊界條件,求出鋼胚表面溫度。鋼胚計算所得之表面溫度與加熱爐假設之鋼胚表面溫度必須加以比較,若兩者溫度差異過大,必須進行加熱爐與鋼胚之迭代運算,直到兩者溫度差值小於一定誤差範圍內。最後我們利用收斂之計算結果探討因動靜樑系統的輻射遮蔽效應,對鋼胚所造成的冷痕進行深入的研究。 關鍵詞:再加熱爐、非耦合計算、輻射遮蔽效應、冷痕 | zh_TW |
dc.description.abstract | In this paper, we aim at the walking beam type slab reheating furnace of China Steel Corporation, and we use computational fluid dynamic software, Star-CD, to build a three-dimensional aerothermal model. The study employs the high-Reynolds- number k-ε turbulence model based on Favre-averaged governing equations. The pre-assumed PDF model associated with the fast chemistry assumption and a single diffusivity is used to account for turbulent combustion. The absorption coefficient of the gases mixture is calculated by WSGGM (weighted-sum-of-gray-gases model). The discrete ordinates method is adopted to calculate the radiactive heat transfer.
Here we use the decoupled method to simulate the reheating furnace. It means we assume the surface temperature of the slab first, and then we exploit the assumed temperature to get gas temperature and heat flux of the slab. We use heat flux of the slab to get the surface temperature of the slab after the slab model is established. We should iterate the case until the calculating surface temperature of the slab converges to the assumed one. Finally, we use the convergent results to discuss the skid mark of slab caused by the radiative shielding by the beams. Keywords:Reheating furnace, Decoupled method, Radiative shielding, Skid mark. | en |
dc.description.provenance | Made available in DSpace on 2021-06-14T16:47:16Z (GMT). No. of bitstreams: 1 ntu-97-R94522313-1.pdf: 4927934 bytes, checksum: 2571683ecd8f1a671d45430cc63de32e (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | 口試委員審定書……………………………………………………………………………... i
誌謝........................................................................................................................................... ii 中文摘要……………………………………………………………………………………... iii 英文摘要……………………………………………………………………….. ………….... iv 目錄…………………………………………………………………………….. ………….... v 表目錄………………………………………………………………………….. ………….... vii 圖目錄………………………………………………………………………….. ………….... viii 第一章 緒論………………………………………………………………………………..... 1 1.1 研究背景………………………………………………………………. ………….... 1 1.2 研究目的………………………………………………………………. ………….... 4 1.3 論文架構………………………………………………………………. ………….... 5 第二章 物理模式與統御方程式…………………………………………………………..... 6 2.1 紊流模式………………………………………………………………. ………….... 6 2.2 燃燒模式(PPDF) …………………………………………………………………..... 8 2.3 輻射熱傳模式…………………………………………………………. ………….... 9 2.4 輻射吸收係數模式(WSGGM) ……………………………………….. …………..... 10 2.5 鋼胚溫度場統御方程式…………………………………………………………....... 11 2.6 加熱爐耦合與非耦合解法………………………………………………………...... 11 2.7 初始條件與邊界條件……………………………………………………………....... 12 第三章 加熱爐與數值方法………………………………………………………………..... 14 3.1 加熱爐幾何尺寸與網格系統…………………………………………. ………….... 14 3.1.1 第一加熱爐…………………………………………………….. …………… 15 3.1.2 第二加熱爐…………………………………………………….. …………… 16 3.2 材料參數…………………………………………………………….. …………....... 17 3.3 加熱爐熱效率……………………………………………………………………….. 17 第四章 非耦合法測試……………………………………………………………………..... 19 4.1 簡易網格輸入定溫邊界條件測試……………………………………. ………….... 19 4.2 實際網格輸入定溫邊界條件測試……………………………………. ………….... 20 4.2.1 均勻網格薄鋼胚……………………………………………….. …………… 20 4.2.2 均勻網格厚鋼胚……………………………………………………………... 21 4.2.3 鋼胚網格薄鋼胚……………………………………………….. ………..….. 21 4.2.4 鋼胚網格厚鋼胚……………………………………………….. ………….... 22 4.3 鋼胚網格輸入耦合法熱通量測試……………………………………. …………… 22 第五章 結果與討論………………………………………………………….... …………… 24 5.1 第一加熱爐……………………………………………………………. …………… 24 5.1.1 迭代過程……………………………………………………….. …………… 24 5.1.2 熱流場………………………………………………………….. ………….... 27 5.1.3 冷痕…………………………………………………………….. …………… 28 5.2 第二加熱爐……………………………………………………………. …………… 32 5.2.1 迭代過程……………………………………………………….. …………… 32 5.2.2 熱流場………………………………………………………….. ………….... 33 5.2.3 冷痕…………………………………………………………….. …………… 33 第六章 結論與未來展望……………………………………………………………………. 35 參考文獻……………………………………………………………………….. …………… 37 | |
dc.language.iso | zh-TW | |
dc.title | 扁鋼胚加熱爐熱流場之非耦合模擬研究 | zh_TW |
dc.title | A Decoupled Numerical Study of Thermal Fluid Field In The Slab Reheating Furnace | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 李石頓(Shih-Tuen Lee),顏瑞和(R.H.Yang),王朝華 | |
dc.subject.keyword | 再加熱爐,非耦合計算,輻射遮蔽效應,冷痕, | zh_TW |
dc.subject.keyword | reheating furnace,decoupled method,radiative shielding,skid mark, | en |
dc.relation.page | 116 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2008-07-31 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 4.81 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。