請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/38297
標題: | 液晶顯示器驅動電路:絕熱邏輯電路與液晶顯示器源極驅動電路 LCD Driver Circuit : Adiabatic Logic Circuit And LCD Source Driver Circuit |
作者: | " Nai-Chung,Wang" 王廼忠 |
指導教授: | 郭正邦 |
關鍵字: | 絕熱邏輯電路,液晶顯示器驅動電路, Adiabatic Logic Circuit,LCD Driver Circuit, |
出版年 : | 2005 |
學位: | 碩士 |
摘要: | 摘要
第一章中將說明低功率電路設計的趨勢和低功率絕熱電路技術的介紹。 第二章說明絕熱電路之原理,分析數個傳統多時脈絕熱電路和一般提升式驅動電路並說明其優劣。 第三章提出一個使用能量有效率之互補式金氧半大負載驅動電路使用互補式絕熱/提升式技術藉由雙對偶路徑系統。經過HSPICE模擬後,與使用單路徑的驅動電路作效能比較,証明此改良電路在、功率回收與訊號的完整度上較原電路具有更好的表現。 第四章為一整的液晶顯示器源汲驅動電路系統的設計與模擬驗證,並在輸出端使用一個迴旋率加強的輸出緩衝器來順利的驅動一個薄膜電晶體液晶顯示器的一個畫素。 Abtract In chapter 1, the trend of low voltage design, and its good and bad in recent years will be described In chapter 2, the principles of adiabatic technology will be described. Then several conventional adiabatic and bootstrapped driver circuit families are reviewed, and analyzed with discussion about the advantages and disadvantages. In chapter 3, energy-efficient CMOS large-load driver circuit with the complementary adiabatic/bootstrap technique via dual path are proposed. And by HSPICE simulation, it is proved that in power consumption have been improved to compare with signal path driver circuit. In chapter 4, a whole LCD source driver circuit system will be design and simulation, and we can succeed driver one LCD cell by a slew rate enhancement output buffer. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/38297 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 1.92 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。