Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
    • 指導教授
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 工學院

機械工程學系 : [3922] 系所單位首頁

瀏覽
RSS Feed RSS Feed RSS Feed
系所單位內的文件 (依標題由升冪排序排序): 從 21 到 40 筆,總共 3922 筆
< 上一頁   下一步 >
出版年標題作者系所
2006ALE寬頻元素法於不可壓縮流之發展與應用
Development and Applications of ALE Spectral Element Method for Simulation of Incompressible
Jiong-Zhang Su; 蘇炯彰機械工程學研究所
2010AOI機台之結構最佳化與熱補償設計
Structural Optimum Design and Thermal Compensation Design of an AOI Machine Structure
Chia-Hung Ma; 馬嘉宏機械工程學研究所
2024Arm-SLAM:機器手臂與SLAM結合之應用
Arm-SLAM: an Application Combining Robot Arm and SLAM
曾建堯; Chien-Yao Tseng機械工程學系
2007Arnoldi精簡模型於壓電元件之應用
Arnoldi-based Model Order Reduction For Piezoelectric Device
Chi-Wei Kuo; 郭崎煒機械工程學研究所
2023Assur群之運動學、奇異構型與靜力學模組化分析
Modular Kinematic, Singularity and Static Analysis Using Assur Group
林佐庭; Tso-Ting Lin機械工程學系
2008B-spline曲面G2連續性之自動調整
Automated G2 Continuity Adjustment of B-spline Surface
Chien-Yi Chen; 陳見宜機械工程學研究所
2013B-spline曲面之重建與連續性嵌合
Continuity Adjustment and Surface Fitting of B-spline Surface
Tsung-Lin Hsieh; 謝宗霖機械工程學研究所
2010B-spline曲面搭接連續性調整
Continuity Adjustment of B-spline Surfaces
Yu-Ming Tsao; 曹育銘機械工程學研究所
2011Barber邊界條件下Aldo模型的熱彈性穩定性分析
Thermoelastic Stability of Aldo Model with Barber’s Condition
Song-Ting Huang; 黃頌庭機械工程學研究所
2009Beta平面紊流特性之研究
A Study of Turbulent Flows on the Beta-Plane
Su-Yang Shieh; 謝曙陽機械工程學研究所
2025C1100銅合金與6061鋁合金之摩擦攪拌焊接異質接合件腐蝕行為及耦合鋯化成機制研究
Corrosion Behavior of Friction Stir Welding between C1100 Copper Alloy and 6061 Aluminum Alloy and Formation Mechanism of Zr Conversion Coating on Galvanic Couple
吳奕廷; Yi-Ting Wu機械工程學系
2005CAM系統三軸高速銑削路徑探討Hsien-Ching Liu; 劉憲青機械工程學研究所
2007CMP鑽石修整器修整聚胺酯拋光墊表面特性之研究
CMP Diamond Conditioner Dressing Characteristics of Polyurethane Pad
Ming-Yi Tsai; 蔡明義機械工程學研究所
2015CNC立式銑削再生式顫振預測之研究
Prediction of the Regenerative Chatter in Vertical CNC Milling Process
Yao-Wen Kuo; 郭耀文機械工程學研究所
2024CNC車床之可靠度設計與分析
Reliability Design and Analysis of CNC Lathes
陳建中; Chien-Chung Chen機械工程學系
2020CNC銑削再生式顫振預測之研究
Prediction of Regenerative Chatter in CNC Milling Process
Shih-Jen Chen; 陳世臻機械工程學研究所
2017CNC銑削智能化顫振控制系統之研究
Development of an Intelligent Chatter Control System in CNC Milling Process
Zong-Shung Liu; 劉宗昇機械工程學研究所
2019CNC銑削顫振預測與抑制系統之研究
Development of an Chatter Predict and Suppress System in CNC Milling Process
Yu-Sheng Chen; 陳譽升機械工程學研究所
2007CO2氣體輔助微熱壓製程開發研究
Development of CO2 gas-assisted micro embossing process
Jyun-Kai Ciou; 邱俊凱機械工程學研究所
2018CO2脈衝雷射應用於PEDOT:PSS熱處理製程之研究
Study of PEDOT:PSS Thermal Treatment by CO2 Pulsed Laser
Yin-Te Lan; 藍尹德機械工程學研究所
系所單位內的文件 (依標題由升冪排序排序): 從 21 到 40 筆,總共 3922 筆
< 上一頁   下一步 >

探索

系所
  • 3373 機械工程學研究所
  • 549 機械工程學系
學位
  • 3538 碩士
  • 384 博士
指導教授
  • 99 陳希立
  • 69 顏家鈺(jia-yush yen)
  • 65 黃漢邦(han-pang huang)
  • 62 陳復國
  • 60 黃漢邦
  • 56 陳希立(sih-li chen)
  • 55 廖運炫
  • 54 楊宏智
  • 50 馬劍清
  • 49 黃秉鈞
  • . 下一頁 >
作者
  • 5 kuan-yu chen
  • 5 yu-hsuan lin
  • 4 林威志
  • 4 陳冠宇
  • 3 chen-yu chen
  • 3 cheng-han lin
  • 3 cheng-wei chen
  • 3 chia-wei lin
  • 3 shih-han huang
  • 3 wei-ting lin
  • . 下一頁 >
關鍵字
  • 123 finite element analysis
  • 105 有限元素法
  • 79 有限元素分析
  • 73 finite element method
  • 44 最佳化
  • 43 可靠度
  • 42 reliability
  • 42 robust control
  • 41 奈米碳管
  • 40 強韌控制
  • . 下一頁 >
出版年
  • 984 2020 - 2025
  • 2005 2010 - 2019
  • 933 2004 - 2009
全文授權
  • 2436 有償授權
  • 645 未授權
  • 569 同意授權(全球公開)
  • 272 同意授權(限校園內公開)
社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved