請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36686
標題: | 光學滑動感測器運用於功能性電刺激之研究 Study of Optical Slipping Sensor for Grasping in Functional Electrical Stimulation |
作者: | Chien-Jen Liao 廖建仁 |
指導教授: | 劉正良 |
關鍵字: | 光學滑動感測器,功能性電刺激,抓握,閉迴路控制, Optical slipping sensor,Functional electrical stimulation,Grasping,Closed-loop control, |
出版年 : | 2005 |
學位: | 碩士 |
摘要: | 藉由功能性電刺激進行抓握物體時,握力不足可能造成握持物滑動之現象。現今雖有滾輪式滑動感測器運用於功能性電刺激上,利用回饋機制以求達到握物止滑的目的,但由於運用於功能性電刺激上的滾輪式感測器解析度較低,所以對於滑動現象之偵測較不靈敏,造成系統的反應速度較慢。故本研究將一光學滑動感測器應用於功能性電刺激系統上,以改進滾輪式滑動感測器系統解析度較低及反應速度較慢的缺點,並解決握物滑動之問題。
本研究之光學滑動感測器由一發光二極體和影像感測器所組成。利用發光二極體當作光源,藉由影像感測器偵測物體表面特徵之移動狀況,判斷出握物滑動的情形,而滑動訊號由訊號擷取卡收集,並由LabVIEW程式做處理。當滑動發生時,系統可以有更快速及更精確的滑動訊號回饋,藉由功能性電刺激即時增大抓握力量,達到握物止滑之目的。 The shortage of grasping force while using functional electrical stimulation to grasp objects may cause object to slip. Though rolling sensor is used as feedback in the closed-loop system, the low resolution of it makes the system can’t detect the precise motion. In this work, an optical slipping sensor is used to replace the rolling sensor to improve the problem. The slipping sensor is developed by an optical mouse sensor which can detect the precise motion between the palm of the hand and grasping object. Sensing signal is then collected by DAQ card and processed through LabVIEW program. The results show that the performance of the system is improved. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36686 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 9.92 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。