請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36465
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 周雍強 | |
dc.contributor.author | Chia-Yu Yeh | en |
dc.contributor.author | 葉家佑 | zh_TW |
dc.date.accessioned | 2021-06-13T08:01:51Z | - |
dc.date.available | 2007-07-30 | |
dc.date.copyright | 2005-07-30 | |
dc.date.issued | 2005 | |
dc.date.submitted | 2005-07-22 | |
dc.identifier.citation | [1] 張毓恒, “半導體製造之產品組合變異與效用評估,”碩士論文,台灣大學工業工程研究所, 2004.
[2] 湯慶偉, “供應鏈協同式生產排程之制約滿足工具,” 碩士論文, 國立台灣大學工業工程所, 2004. [3] 李怡靜, “測試效率之評估模型”旺宏電子研討會, 旺宏電子成品測試部,2004. [4] 黃信榮, “記憶體IC最終測試廠主生產規劃系統之構建,”碩士論文, 交通大學工業工程研究所,2002. [5] 蔡瑜明, “半導體後段IC封裝最適排程之研究─禁忌搜尋法之應用,”碩士論文, 中山大學企業管理研究所,2002. [6] 陳巧頤, “IC 封裝廠排程問題,”碩士論文, 交通大學工業工程研究所,2002. [7] 陳明德, “平行機台分派問題之制約模式,” 碩士論文, 國立台灣大學工業工程所, 2001. [8] 劉世強, “半導體最終測試廠扣留批問題探討及研究,”碩士論文, 元智大學工業工程研究所,2001. [9] 鄧豐毅, “半導體針測區現場作業排程分析,”碩士論文, 清華大學工業工程研究所,1998. [10] 李武章, “半導體製造執行系統之設計與實現,”碩士論文, 台灣科技大學電機研究所,1998. [11] 周雍強, “非等效並聯機台之生產規劃與排程,”國立台灣大學工業工程所, 生產排程理論與運用研討會, 1999. [12] Wu, C. S., “A Methodology to Evaluate Production Performances in Dynamic Capacity of Semiconductor Industries,” Master thesis, GIIE, NTU, 2001, pp. 75. [13] U. W. Thonemann, “The Effect of Product Variety on Supply-Chain Performance ” European Journal of Operational Research, Vol. 143, No. 3, December 2002, pp. 548-569. [14] Deshmukh, A. V., Talavage, J. J., and Barash, M. M., “Complexity in Manufacturing Systems: Part 1 - Analysis of Static Complexity,“ IIE Transactions, vol 30, number 7, pp. 645-655, 1998. [15] Y Chou, “Variance Modeling,” Class Note, NTU GIIE, 2005. [16] Hopp W. J., Spearman M. L., Factory Physics, McGraw-Hill, 2000. [17] Benjaafar, S., J. Kim and Vishwanadham N., 'On the Effect of Product Variety in Production-Inventory Systems,' Annals of Operations Research, in review. [18] Gerard Cachon, 'Product Variety, Inventory Management and Firm Performance,' MSOM Conference 2005. [19] Raid Al-Aomar, 'Product-Mix Analysis With Discrete Event Simulation,' 2000 Winter Simulation Conference. [20] 通用汽車網站:http://www.gm.com/ [21] 林國楨, ”蛻變的新豐田模式,”推廣教育網:http://www.sce.pccu.edu.tw/sce/studybase/01mag/52-1-04.asp [22] IBM網站:http://www-901.ibm.com/tw/gmb/industry/china.html [23] 台灣應用材料網站:http://www.amat.com.tw/company/company_1.html [24] 工研院機械工業研究所網頁: http://www.mirl.itri.org.tw/mirl-inter/knowledge/newsletter/newsletter.asp [25] 方世榮, 「統計學」, 五南, 1991. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36465 | - |
dc.description.abstract | 產品的生命週期越來越短,加上製程推陳出新,一個製造系統所生產的產品越來越多,種種因素的混合之下,製造系統複雜度快速增加,導致整個製造系統控制的困難,因此此研究要分析多樣性對製造系統的影響,藉以瞭解製造系統的行為模式。
產品組合包含了兩個主要的因素,一為產品種類,一為產品比例,兩者都會對製造系統造成衝擊,產品多樣性增加可能會造成系統的前置時間增加,並造成存貨與成本的增加,此外產品多樣性也可能會造成製造系統的設定轉換增加,機台利用率減少等等的問題,這些問題會隨著產品多樣性的增加快速的增加,因此研究產品多樣性問題的重要性也會越趨重要。 此研究主要是以平行機台為研究之對象,定義出衡量多樣性的方法,運用機台分配的ILP模型進行製造系統的分析,並且藉由探討產品的數量與種類等問題對多樣性進行分析,從中瞭解多樣性對製造系統的績效影響狀況。 透過產品比例的變異係數可以對產品比例加以衡量,並且經由實驗分析瞭解效率損失會隨產品種類數增加而增加,並且隨機台數增加而減少,並且瞭解加工時間與設定時間的比例與時格大小也會對效率造成影響,而產品比例方面的影響較小,並且不會與其他因子有交互作用關係,關於產品來到方面的影響,最主要的影響為產品的種類數。 | zh_TW |
dc.description.abstract | Product mixes include two main factors. One is the product types and the other is the proportions of the products. In this thesis, the effects of product mixes on the performance of parallel machine operation are studied. A mixed integrated linear Program is used to compute the setup changeover time. The proportions of products are measured by the the coefficient of variation. Simulation is then used to evaluate the efficiency loss due to setup changeover times. Finally, regression analysis is used to correlate the performance loss with product mixes. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T08:01:51Z (GMT). No. of bitstreams: 1 ntu-94-R92546010-1.pdf: 730827 bytes, checksum: 45b688362e66418bc3e50cbbc6e9447b (MD5) Previous issue date: 2005 | en |
dc.description.tableofcontents | 摘要 I
Abstract II 目錄 III 圖目錄 V 表目錄 VI 第一章 緒論 1 1.1研究背景與動機 2 1.2問題描述 4 1.2.1複雜度 5 1.2.2產品組合 6 1.2.3產品比例對設定轉換之影響 6 1.3研究目的 8 1.4研究構想 8 1.5論文架構 10 第二章 文獻回顧與探討 11 2.1半導體後段製程之製造系統 11 2.1.1封裝與測試製程 11 2.1.2半導體後段之製造系統 13 2.2生管問題 14 2.3 產品組合 17 第三章 機台分配之整數線性規劃模式 21 3.1整數規劃模型 21 3.2資料表與求解系統說明 24 3.3 機台分派定性分析 26 3.4程式測試 30 第四章 產品組合之影響 37 4.1 來到變動 37 4.1.1 來到變動之影響 37 4.1.2 產品比例衡量指標 39 4.1.3順序複雜度 44 4.2 Job sequence產生程序 47 4.3 多樣性實驗設定 51 4.4 實驗結果分析與模型一建立 56 4.5 模型二 62 4.6 產品種類變動之設定轉換次數上下限計算 66 4.6.1 單一機台設定轉換 66 4.6.2 平行機台設定轉換 67 4.6.3 最少設定轉換次數(N-M)的調整 68 第五章 結論與未來展望 70 5.1 結論 70 5.2 未來研究建議 71 參考文獻 72 附錄 74 | |
dc.language.iso | zh-TW | |
dc.title | 產品組合對平行機台工作分派效率之影響 | zh_TW |
dc.title | Evaluation of the Effect of Product Mixes on the Performance of Machine Assignment for Parallel Machines | en |
dc.type | Thesis | |
dc.date.schoolyear | 93-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 謝淑華,陳正剛,楊烽正,蔣明晃 | |
dc.subject.keyword | 多樣性,複雜性,產品組合,平行機台, | zh_TW |
dc.subject.keyword | Product Variety,Product Mix,Parallel machine, | en |
dc.relation.page | 87 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2005-07-22 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 工業工程學研究所 | zh_TW |
顯示於系所單位: | 工業工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 713.7 kB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。