請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36119
標題: | 微帶線矩形共振器之濾波器與雙工器設計 Filter and Diplexer Design with Microstrip Rectangular Resonators |
作者: | Chi-Ping Chu 邱繼平 |
指導教授: | 吳瑞北(Ruey-Beei Wu) |
關鍵字: | 微帶線,矩形,濾波器,雙工器,步階阻抗共振器, microstrip,rectangular,filter,diplexer,stepped-impedance resonators, |
出版年 : | 2005 |
學位: | 碩士 |
摘要: | 本論文中,首先設計體積小、選擇性好的窄頻帶通濾波器,利用交錯耦合的方式產生傳輸零點以達到高選擇性的頻率響應。
之後,利用此濾波器設計中心頻率在2GHz及3GHz的雙工器,兩濾波器以微帶線相連接,而微帶線長度須符合相位的條件。 為了減少雙工的體積大小,我們採用步階阻抗共振器將兩濾波器相結合,經由此方法可以將八個共振器縮減為六個共振器。不過,此雙工器雖然尺寸成功的縮減,但卻也降低了隔離度的品質。 之後,設計第三種雙工器,仍然使用步階阻抗共振器做結合,但結合方式不相同,兩濾波器共用相同的輸入端共振器。此新方法依然可以有效減少尺寸大小,而且仍能維持非常良好的效果,也證明了採用步階阻抗共振器做結合的可行性。 In the beginning of this thesis, we design a compact and highly selective narrow-band filter. The highly selective response can be achieved by introducing transmission zeros which may be realized by cross coupling a pair of nonadjacent resonators of the filter. In addition, we design the diplexer by using the above-mentioned filter designed at 2GHz and 3GHz, respectively. The two filters are connected by the microstrip lines whose lengths have to satisfy appropriate phase condition. To reduce the diplexer size, stepped impedance resonators are adopted in the diplexer design. Through this way the eight resonators can be reduced to six. This diplexer, however, improves the size but degrades the isolation. Another way to reduce the diplexer size is that two filters share the same input stepped-impedance resonator. And the diplexer of this type not only has a more compact size but also keeps the very good performance. Thus we have verified that this is practical to combine two filters by using stepped impedance resonators in the diplexer design. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36119 |
全文授權: | 有償授權 |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-94-1.pdf 目前未授權公開取用 | 3.19 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。