請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34896
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃坤祥(Kuen-Shyang Hwang) | |
dc.contributor.author | Chia-Wei Liu | en |
dc.contributor.author | 劉家維 | zh_TW |
dc.date.accessioned | 2021-06-13T06:36:24Z | - |
dc.date.available | 2011-08-22 | |
dc.date.copyright | 2011-08-22 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-07-25 | |
dc.identifier.citation | [1] 王蘠,李國定,龔克,電磁場理論基礎,五南圖書出版股份有限公司,2003,第 69 頁。
[2] B. D. Cullity and C. D. Graham, Introduction to Magnetic Materials, Wiley-IEEE Press, Hoboken, NJ, Second Edition, 2008, pp. 276-283. [3] M. F. Littmann, 'Iron and Silicon-Iron Alloys', IEEE Transactions on Magnetics, 1971, Vol. 7, No. 1, pp. 48-60. [4] J. A. Bas, J. A. Calero, and M. J. Dougan, 'Sintered Soft Magnetic Materials. Properties and Applications', Journal of Magnetism and Magnetic Materials, 2003, Vol. 254-255, pp. 391-398. [5] P. F. Elarde, 'All Electronic Magnetic Hysteresigraph', Am. Ceram. Soc. Bull., 1966, Vol. 45, No. 8, pp. 756-772. [6] I. Frayman, D. R. Ryan, and J. B. Ryan, 'Selecting PM Soft Magnetic Materials', Metal Powder Report, 1997, Vol. 52, No. 4, pp. 32-36. [7] C. H. Worner and J. E. Valdes, 'On the Pinning of Domain Walls in Low Magnetization Materials', Journal of Applied Physics, 1988, Vol. 63, No. 8, pp. 4324-4326. [8] D. C. Jiles, 'Recent Advances and Future Directions in Magnetic Materials', Acta Materialia, 2003, Vol. 51, No. 19, pp. 5907-5939. [9] M. Gagne, J. P. Poirier, and Y. Trudel, 'Designing a Steel Powder for Soft Magnetic Applications', Advances in Powder Metallurgy and Particulate Materials , Edit by E. R. Andreotti and P. J. McGeehan, Metal Powder Industries Federation, Princeton, NJ, 1990, Vol. 2, pp. 20-23. [10] H. Shokrollahi, 'The Magnetic and Structural Properties of the Most Important Alloys of Iron Produced by Mechanical Alloying', Materials and Design, 2009, Vol. 30, No. 9, pp. 3374-3387. [11] 侯春看,張六文,電磁鋼片,鋼鐵材料設計與應用,鄭國華等人編輯,中國礦業工程學會,2007,367-380 頁。 [12] L. P. Lefebvre, S. Pelletier, and C. Gelinas, 'Effect of Electrical Resistivity on Core Losses in Soft Magnetic Iron Powder Materials', Journal of Magnetism and Magnetic Materials, 1997, Vol. 176, No. 2-3, pp. 93-96. [13] H. Shokrollahi and K. Janghorban, 'Soft Magnetic Composite Materials (SMCs)', Journal of Materials Processing Technology, 2007, Vol. 189, No. 1-3, pp. 1-3. [14] 林正雄,金重勳,軟磁技術簡介,磁性技術手冊,金重勳編輯,中華民國磁性技術協會,2002,117-122 頁。 [15] T. Maeda, H. Toyoda, and N. Igarashi, 'Development of Super Low Iron-Loss P/M Soft Magnetic Materials', SEI Technical Review, 2005, Vol. 60, pp. 3-9. [16] B. Weglinski, 'Sinters for Magnetic Applications', Reviews on Powder Metallurgy and Physical Ceramics, 1992, Vol. 5, No. 1, pp. 1-79. [17] L. I. Frayman, D. R. Ryan, and J. B. Ryan, 'Selecting PM Soft Magnetic Materials', Metal Powder Report, 1997, Vol. 52, No. 5, pp. 44-48. [18] J. A. Bas and J. Puig, 'High Density Sintered Magnetic Materials in Automotive Applications', Metal Powder Report, 1988, Vol. 43, No. 11, pp. 734-736. [19] C. Lall and L. W. Baum, 'High Performance Soft Magnetic Components by Powder Metallurgy and Metal Injection Molding', Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, USA, 1988, Vol. 18, pp. 363-389. [20] H. Shokrollahi and K. Janghorban, 'The Effect of Compaction Parameters and Particle Size on Magnetic Properties of Iron-Based Alloys Used in Soft Magnetic Composites', Materials Science and Engineering, 2006, Vol. 134, No. 1, pp. 41-43. [21] U. Engstrom and P. Jansson, 'Metal Powders for the Production of Soft Magnetic Parts', Material Technology, 1987, Vol. 75, No. 1-2, pp. 1-2. [22] R. W. K. Honeycombe, Steels-Microstructure and Properties, Edward Arnold Ltd., London, 1981, pp. 6-7. [23] O. Kubaschewski, Iron-Binary Phase Diagrams, Springer-Verlag Inc., Berlin, 1982, pp. 84-86. [24] P. Engdahl, 'Mechanical Properties and Microstructure of Phosphorus Alloyed Sintered Steel', Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1998, Vol. 22, pp. 655-665. [25] K. H. Moyer and J. B. Ryan, 'Emerging P/M Alloys for Magnetic Applications', Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1988, Vol. 18, pp. 5-10. [26] R. Li, Q. Shen, L. Zhang, and T. Zhang, 'Magnetic Properties of High Silicon Iron Sheet Fabricated by Direct Powder Rolling', Journal of Magnetism and Magnetic Materials, 2004, Vol. 281, No. 2-3, pp. 135-139. [27] J. Kaczmar and B. Weglinski, 'Effect of Production Engineering Parameters on the Magnetic Properties and Structure of Iron-Silicon P/M Materials', International Journal of Powder Metallurgy, 1982, Vol. 18, No. 1, pp. 25-35. [28] J. A. Lund, Y. Tanaka, and X. Qu, 'Flux-Enhancement of Alloying in Iron-3% Silicon Compacts', International Journal of Powder Metallurgy, 1988, Vol. 24, No. 4, pp. 301-313. [29] D. Oleksakova, S. Roth, P. Kollar, and J. Fuzer, 'Soft Magnetic Properties of NiFe Compacted Powder Alloys', Journal of Magnetism and Magnetic Materials, 2006, Vol. 304, No. 2, pp. 730-732. [30] C. Lall, Soft Magnetism: Fundamentals for Powder Metallurgy and Metal Injection Molding, Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 67-70. [31] L. Y.-M. Zeng Zhao-Yi, He Hao, Xiong Liang, 'Fe-50%Ni Soft Magnetic Alloy Prepared by Metal Injection Molding', Materials Science and Engineering of Powder Metallurgy, 2011, Vol. 16, No. 1, pp. 124-130. [32] E. Lopez-Chavez, J. M. M. Magadana, and F. L. De Castillo-Alvarado, 'Effect of Ni and Co Impurities on the Electronic Structure and Magnetic Properties of BCC Iron', Journal of Magnetism and Magnetic Materials, 2004, Vol. 280, No. 2-3, pp. 293-303. [33] A. Silva, J. A. Lozano, R. Machado, J. A. Escobar, and P. A. P. Wendhausen, 'Study of Soft Magnetic Iron Cobalt Based Alloys Processed by Powder Injection Molding', Journal of Magnetism and Magnetic Materials, 2008, Vol. 320, No. 14, pp. 393-396. [34] H. M. Kopech, H. G. Rutz, and P. A. de Poutiloff, 'Effects of Powder Properties and Processing on Soft Magnetic Performance of 400-Series Stainless Steel Parts', Advances in Powder Metallurgy and Particulate Materials , Edit by E. R. Andreotti and P. J. McGeehan, Metal Powder Industries Federation, Princeton, NJ, 1993, Vol. 6, pp. 16-19. [35] 黃坤祥,粉末冶金學,中華民國粉末冶金協會,第二版,2003,1-8 頁。 [36] R. M. German, Powder Injection Molding, Metal Powder Industries Federation, Princeton, NJ, 1997, pp. 16~20. [37] J. Zhang, B. Y. Huang, Y. M. Li, S. L. Li, D. X. Li, and Z. Y. Deng, 'Powder Injection Molding in Soft Magnetic Materials Applications', Powder Metallurgy Technology, 2004, Vol. 22, No. 6, pp. 369-373. [38] 黃坤祥,粉末冶金學,中華民國粉末冶金協會,第二版,2003,246-260 頁。 [39] J. Das, K. Chandra, P. S. Misra, and B. Sarma, 'Novel Powder Metallurgy Technique for Development of Fe-P-based Soft Magnetic Materials', Journal of Magnetism and Magnetic Materials, 2008, Vol. 320, No. 6, pp. 906-915. [40] T. Maeda, A. Sato, Y. Mochida, H. Toyoda, K. Mimura, and T. Nishioka, 'Improvement of Super Low Core-Loss Soft Magnetic Materials', Materials Science Forum, 2007, Vol. 534-536, pp. 1325-1328. [41] G. Jangg, M. Drozda, H. Danninger, and G. Eder, 'Magnetic Properties of Sintered Fe-P Materials', Powder Metallurgy International, 1984, Vol. 16, No. 6, pp. 264-267. [42] R. H. Yu, S. Basu, Y. Zhang, A. Parvizi-Majidi, and J. Q. Xiao, 'Pinning Effect of the Grain Boundaries on Magnetic Domain Wall in FeCo-Based Magnetic Alloys', Journal of Applied Physics, 1999, Vol. 85, No. 9, pp. 6655-6659. [43] J. Degauque, B. Astie, J. L. Porteseil, and R. Vergne, 'Influence of the Grain Size on the Magnetic and Magnetomechanical Properties of High-Purity Iron', Journal of Magnetism and Magnetic Materials, 1982, Vol. 26, No. 1-3, pp. 261-263. [44] M. Anhalt, 'Systematic Investigation of Particle Size Dependence of Magnetic Properties in Soft Magnetic Composites', Journal of Magnetism and Magnetic Materials, 2008, Vol. 320, No. 14, pp. 366-369. [45] S. Mocarski, L. A. Winquist, and L. E. Deangelis, 'Properties of Magnetically Soft Parts Made by Hot Forging of P/M Preforms', Modern Developments In Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1971, Vol. 4, pp. 451-462. [46] H. S. H. Ohtsubo, 'MIM Shows Promise as Path to Magnetic Parts', Metal Powder Report, 1994, Vol. 49, No. 6, pp. 28-31. [47] K. Hajmrle, J. M. Capus, and K. Hajmrle, 'Sintering Atmosphere and DC Magnetic Properties of Iron', Powder Metallurgy, 1980, Vol. 23, No. 2, pp. 95-99. [48] J. M. Capus and K. Hajmrle, 'How Sintering Atmospheres Affect Magnetic Properties', Progress in Powder Metallurgy, 1982, Vol. 38, pp. 24-27. [49] K. H. Moyer, 'The Magnetic Properties (DC) of Atomized Iron Powder Cores', New Perspectives in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1990, Vol. 9, pp. 135-147. [50] Z. Ahmad, A. Ali, M. Farooque, and A. ul Haq, 'Deformation Texture and Magnetic Properties of Dual-Phase Fe-Co-V Alloys', Materials and Design, 2009, Vol. 30, No. 9, pp. 3885-3890. [51] H. G. Rutz, F. G. Hanejko, and G. W. Ellis, 'The Manufacture of Electromagnetic Components by the Powder Metallurgy Process', Advances in Powder Metallurgy and Particulate Materials , Edit by E. R. Andreotti and P. J. McGeehan, Metal Powder Industries Federation, Princeton, NJ, 1997, Vol. 1, pp. 47-51. [52] I. Hemmati, H. R. Madaah Hosseini, and A. Kianvash, 'The Correlations Between Processing Parameters and Magnetic Properties of an Iron-Resin Soft Magnetic Composite', Journal of Magnetism and Magnetic Materials, 2006, Vol. 305, No. 1, pp. 147-151. [53] G. A. Bolze and J. M. Capus, 'Factors Affecting Magnetic Properties of Sintered Iron', Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1977, Vol. 11, pp. 335-370. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34896 | - |
dc.description.abstract | 乾壓成形與金屬射出成形之純鐵與鐵基合金軟磁零件,已廣泛地應於各項電子產品中,隨著電子產品的小型化,更凸顯粉末冶金製程在製造小型且形狀複雜之零件時,產量較高且成本較低的優勢,但由於製造過程中有添加高分子黏結劑,因此產品的雜質含量需要特別控制以獲得良好的磁性質。本實驗選用四種羰基鐵粉,測量在不同升溫速率、燒結溫度及燒結氣氛的情況下,純鐵燒結後之磁性質表現;本實驗也在純鐵粉中添加數種常用之合金元素,並使用工業界常用之燒結製程參數,以探討製造軟磁零件之可行性。
實驗結果發現,熱脫脂時之升溫速率對羰基鐵粉燒結後的磁性質有很大的影響,以不含SiO2之羰基鐵粉為例,熱脫脂過程中以3 ℃/min速率升溫之乾壓成形試片,於1350℃裂解氨氣氛下燒結一小時後,其磁性質與以5 ℃/min速率升溫之試片相比時,矯頑磁力減少13%且最大導磁率增加45%,分別達到141 A/m與3880。實驗結果也發現,在純鐵中添加合金元素後,對於熱脫脂過程之升溫速率可能變得更加敏感,以Fe-3 wt% Si為例,熱脫脂過程中以3 ℃/min速率升溫之乾壓成形試片,於1350℃裂解氨氣氛下燒結一小時及在真空中燒結兩小時後,其磁性質均不理想,但降低升溫速率至2 ℃/min時,試片之飽和磁束密度提升15%,矯頑磁力減少60%,最大導磁率增加60~70%。 本實驗結果顯示,不含SiO2且粒徑較小(D50=4μm)之羰基鐵粉,以乾壓成形,並以3 ℃/min之升溫速率於裂解氨氣氛中進行熱脫脂,再於1350℃裂解氨氣氛中燒結一小時,其密度達到7.45 g/cm3,以最大外加磁場1990 A/m測量時,飽和磁束密度為1.51 Tesla,殘留磁束密度為1.29 Tesla,矯頑磁力為141 A/m,最大導磁率為3880,為本實驗磁性質最佳之純鐵材料。本實驗也比較了含有2 wt%、8 wt%及50 wt% Ni之鐵鎳合金,以及Fe-49Co-2V合金的磁性質,其中Fe-50 wt% Ni之導磁率最佳為13467,而Fe-49Co-2V之飽和磁束密度最佳為1.86 Tesla。 | zh_TW |
dc.description.abstract | Iron and iron-base alloys made by Press and Sinter (P/S) process and Metal Injection Molding (MIM) process, are now widely used in a variety of electronic applications. The advantages of P/S and MIM parts include high yield and low cost. However, due to the polymeric binder added to the green parts, impurity level could be too high to achieve good magnetic properties. Four kinds of carbonyl iron powders are used in this study. The magnetic properties are measured after sintering in different heating rates, sintering temperatures and sintering atmospheres. Iron-base soft magnetic alloys are also examined in this study. The alloys are sintered using industrial production parameters to demonstrate its practicability.
The results showed that magnetic properties are greatly influenced by the heating rate during thermal debinding. For the carbonyl iron powder without containing SiO2, when compacted and then sintered at 1350℃ in cracked ammonia for one hour, the coercivity decreased by 13% and permeability increased by 45% after decreasing the heating rate from 5 ℃/min to 3 ℃/min during thermal debinding, and reached 141 A/m and 3880, respectively. Similar behavior is shown in Fe-3 wt% Si alloys, when P/S Fe-3 wt% Si parts are sintered at 1350℃ in cracked ammonia for one hour and at 1350℃ under vacuum for two hours, the maximum induction increased by 15%, the coercivity decreased by 60%, and the permeability increased by 60~70%, when the heating rate is decreased from 3 ℃/min to 2 ℃/min. The best magnetic properties of P/S iron was obtained using OM powder and using a heating rate of 3 ℃/min for thermal debinding and sintering at 1350℃ in cracked ammonia for one hour. The properties were Bs=1.51 Tesla, Br=1.29 Tesla, Hc=141 A/m, and μmax=3880. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T06:36:24Z (GMT). No. of bitstreams: 1 ntu-100-R96527050-1.pdf: 12181352 bytes, checksum: b6adfebec2fb80a5ea61a43b1c9531df (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 摘要 i
Abstract ii 目錄 iii 圖目錄 vi 表目錄 xiv 第一章 簡介 1 第二章 文獻回顧 2 2-1 材料的磁性質 2 2-2 鐵磁性材料 4 2-2-1 磁域、磁壁與磁化機構 4 2-2-2 磁滯曲線 6 2-3 鐵基合金軟磁材料性質與種類 7 2-3-1 純鐵 10 2-3-2 鐵磷合金 11 2-3-3 鐵矽合金 13 2-3-4 鐵鎳合金 14 2-3-5 鐵鈷合金 14 2-3-6 不銹鋼 15 2-4 粉末成形與粉末冶金製程 17 2-4-1 乾壓成形製程 17 2-4-2 金屬射出成形製程 18 2-5 影響粉末冶金軟磁材料的因素 20 2-5-1 燒結密度與孔洞大小的影響 20 2-5-2 晶粒大小與原始粉末粗細的影響 23 2-5-3 雜質含量的影響與燒結氣氛的選擇 26 2-5-4 冷卻速率的影響 29 2-5-5 應力應變的影響與磁性退火 31 2-6 研究動機 33 第三章 實驗步驟 34 3-1 實驗設計 34 3-2 原料 35 3-2-1 基礎粉 35 3-2-2 黏結劑 45 3-3 混合與混煉 45 3-4 成形 47 3-5 脫脂 48 3-5-1 溶劑脫脂 48 3-5-2 熱脫脂與預燒結 48 3-6 燒結 48 3-7 性質測試 49 3-7-1 磁滯曲線測量 49 3-7-2 材料電阻率測量 51 3-7-3 密度測量 51 3-7-4 成分分析 51 3-7-5 硬度測量 51 3-7-6 金相製備 52 3-8 實驗儀器 52 第四章 結果與討論 53 4-1 純鐵磁性質比較 53 4-1-1 燒結溫度對乾壓成形試片的影響 54 4-1-2 升溫速率對乾壓成形試片的影響 63 4-1-3 乾壓成形與金屬射出成形之差異 73 4-1-4 升溫速率對金屬射出成形試片的影響 81 4-1-5 氣氛選擇對金屬射出成形試片的影響 90 4-2 鐵基軟磁材料 98 4-2-1 鐵磷合金 100 4-2-2 鐵矽合金 106 4-2-3 鐵鎳合金 115 4-2-4 鐵鈷釩合金 124 4-2-5 不銹鋼 129 第五章 結論 135 第六章 未來工作 137 參考文獻 138 附錄 145 | |
dc.language.iso | zh-TW | |
dc.title | 粉末冶金製程參數與合金元素對燒結零件磁性質之影響 | zh_TW |
dc.title | Effects of PM Processing Parameters and Alloying Elements on the Magnetic Properties of Sintered Iron Powders | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 郭博成(Po-Cheng Kuo),林正雄(Cheng-Hsiung Lin) | |
dc.subject.keyword | 乾壓成形,金屬粉末射出成形,磁性材料,羰基鐵粉,升溫速率, | zh_TW |
dc.subject.keyword | Press and Sinter,Metal Injection Molding,Soft Magnetic,Carbonyl Iron Powder,Heating Rate, | en |
dc.relation.page | 151 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-07-25 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 11.9 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。