請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34312
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 蔡明哲 | |
dc.contributor.author | Chia-Wei Lee | en |
dc.contributor.author | 李佳韋 | zh_TW |
dc.date.accessioned | 2021-06-13T06:02:35Z | - |
dc.date.available | 2006-06-27 | |
dc.date.copyright | 2006-06-27 | |
dc.date.issued | 2006 | |
dc.date.submitted | 2006-06-21 | |
dc.identifier.citation | 中日文文獻
1. 于倬云 (1999),中國古建築抗震性能初探,中國大陸故宮博物院刊1999年第2期總84期,8pp.。 2. 王松永、汪光力 (1987),木釘強度之研究(第一報)構件樹種之影響,林產工業6(2):1~12。 3. 王松永,林產工業叢書(1)商用木材,中華林產事業協會出版,2002。 4. 日本住宅木材技術センタ- (2001),木造軸組工法の繼手、仕口と接合金物,層積膠合梁在木結構建築的應用研討及展覽會,木質建築5,中華民國木質構造建築協會印行,8月出刊,pp.154~155。 5. 古鎮維 (2003),鳩尾榫的接合行為,國立嘉義大學林業研究所,57pp.。 6. 沈學銘 (1994),中國傳統建築腐蝕榫卯對木構架結構行為之探討,中興大學土木工程所碩士論文。 7. 林會承 (1995),台灣傳統建築手冊-形式與作法篇,藝術家出版社,pp.81~83。 8. 林邦輝 (1981),臺灣傳統閩南式廟宇研究與施工之研究,成功大學建築研究所碩士論文,95pp.。 9. 高大峰、趙鴻鐵、薛建陽、張鵬程 (2003),中國古代木構建築抗震機理及抗震加固效果的試驗研究,世界地震工程,19(2):1~10。 10. 高大峰、趙鴻鐵、薛建陽 (2004),中國古代大木作結構抗震構造研究,世界地震工程,20(1):100~104。 11. 許桐郡 (2000),台灣地區古蹟建築大木構架節點構造系統的研究,國立成功大學建築學研究所,154pp.。 12. 陳啟仁 (2003),結構修復技術整合行研究計畫-子計畫1:台灣傳統古蹟及歷史建築耐震能力之基礎研究-磚木混造建築結構分析模式之建立,pp.26~37。 13. 張紋韶與徐明福 (2005),臺灣傳統鉤逗榫及踏步燕尾榫力學特性之研究,台灣林業科學,20(1):61~71。 14. 張嘉祥 (2001),歷史建築震損及維護方式之研究(二)砌體構造,行政院文化建設委員會委託,pp.19~31。 15. 張鵬程、趙紅鐵、薛建陽、高大峰 (2002),中國古代大木作結構振動台試驗研究,世界地震工程,18(4):35~41。 16. 楊明津、林東陽 (1986a),方榫接合強度之研究(一)嵌合度對於暗榫接合強度之影響,林產工業,5(2):41~48。 17. 楊明津、林東陽 (1986b),方榫接合強度之研究(二)榫頭尺寸對暗榫接合強度之影響,林產工業,5(3):21~30。 18. 楊淑惠 (1989),木釘、方榫、橢圓榫之接合強性質,台灣大學森林學研究所碩士論文,pp.57~66。 19. 趙金城 (2004),傳統疊斗式大木構架結構行為探討-以三級古蹟台南天壇三川殿為例,成功大學建築研究所碩士論文,pp.19~20。 英文文獻 1. Dowrick, D.J. (1986). Hysteresis loops for timber structures. Society of Earthquake Engineering, 19(20):14~152. 2. Fang, D. P., S. Iwasaki, M. H. Yu, Q. P. Shen, Y. Miyamoto, and H. Hikosaka. (2001a). Ancient Chinese timber architecture I :Experimental study. Journal of Structural Engineering, 127(11):1348-1357. 3. Fang, D. P., S. Iwasaki, M. H. Yu, Q. P. Shen, Y. Miyamoto, and H. Hikosaka. (2001b). Ancient Chinese timber architecture II:Dynamic characteristics. Journal of Structural Engineering, 127(11):1358~1364. 4. Foliente, G. C., ASCE. (1995). Hysteresis modeling of wood joints and structural systems. Journal of Structural Engineering, 121(6):1013~1022. 5. Hill, M.D., and C.A Eckelman. (1973). Mortise and tenon joints: flexibility and bending strength of mortise and tenon joints. Furniture Design and Manufacturing, 45(1):54~62. 6. King, W.S., J.Y. Yen, and Y. N. Yen. (1996). Joint characteristics of traditional Chinese wooden frames. Engineering Structures, 18(8):635~644. 7. Ohtori, Y., and Ishida, K. (1995). Effect of experienced shear strain dependency of high damping rubber bearing on earthquake response of isolation structure. J. Struct. Constr. Engng., Architectural Institute of Japan 472, pp.75~84. 8. Stephen, F. D., R. G. Black, S. A. Mahin, and M. Blondet. (1996). Parameter Study of and internal timber tension connection. Journal of Structural Engineering 122(4):446~452. 9. Seo, J.M., I.K. Choi, and J.R. Lee. (1999). Static and cyclic behavior of wooden frames with tenon joints under lateral load. Journal of Structural Engineering, 125(3):344~349. 10. Sandberg, L. B., W. M. Bulleit, Members, ASCE, and E. H. Reid. (2000). Strength and stiffness of oak pegs in traditional timber-frame joints, Journal of Structural Engineering, 126(6):717~723. 11. Shanks, J., and P. Walker. (1998). Testing of traditional connections in green oak carpentry, Dept. Arch. & Civil Eng., University of Bath, Bath, U.K. 4pp. 12. Smardzewski, J., and T. Papuga. (2004). Stress distribution in angle joints of skeleton furniture, Wood Technology, 7(1), 11pp. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34312 | - |
dc.description.abstract | 本研究針對台灣傳統大木結構的金柱與通梁的榫卯接合方式作反覆載重與單向側推實驗。實尺寸約30年生的人工林杉木,梁柱徑級為30 cm,榫卯嵌合度即縫隙為0。實驗中最大彎矩Mmax與旋轉勁度K定義榫頭的強弱,其中發現榫長增長會使受力面積增大,其中又以穿榫最大,而一般構件設計防止水平拔出的踏步燕尾榫,也比同榫長的單向直榫抵抗彎矩大,而最大彎矩Mmax大者旋轉勁度K亦大。研究中亦探討梁柱構材形狀、榫長、榫接種類等因子對於接合強度的影響,並將實驗結果與前人分析作比較,比較實驗方式,尺寸影響與模型推導結果是否有所差異。
研究結果發現榫卯接頭有以下特性:(1)構件容許很大的位移量;(2)中央滑移段尚有木材本身摩擦所造成的力矩抵抗,實驗進行至該循環力量最大值時,施以相反方向的力,圖形有反翹(力量提升)的現象;(3)中央會產生一段滑移現象,因此嵌合度對接頭力學行為有很大的影響;(4)每個循環進行第二次時力量均較第一次小,表示木材纖維受到擠壓發生變形;(5)下一循環的第一次曲線會沿著上一循環的第二次曲線上升。 | zh_TW |
dc.description.abstract | The main purpose of this study was to investigate mechanical behavior of tenon and mortise wood joints by cyclic loading and lateral loading in Taiwan traditional wood structure. Related studies were less in our country, and most of them were tested on small size of furniture or reduction the size in the same ratio. The tested components were 30-year-old woods of artificial China fir, and the diameters of post and beam were 30 cm, and the tenon fitness was 0.
The maximum moment and rotational stiffness were defined as joint strength. Experimental results revealed that increasing tenon length would increase bearing area, and especially the “through tenon” was the strongest. The strength of “stepped dovetail tenon” which was the common joint to resist lateral force was stronger than that of the “straight tenon” with the same length. The following characteristics of the tenon and mortise joints were found:(1)Wood components could allow much displacement. (2)The strength of cyclic loading would increase as opposite force affected the joint. (3)According to the slip, the tenon fitness would affect the mechanical behavior of joint. (4)The moment of the second cycle was lower than that of the first cycle. (5) In next cyclic loading, the curve of the first cycle would be along the curve of the second cycle in previous cycle. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T06:02:35Z (GMT). No. of bitstreams: 1 ntu-95-R93625002-1.pdf: 1492159 bytes, checksum: 453f6bfcb74f5e7cd6e9c691eb37e34d (MD5) Previous issue date: 2006 | en |
dc.description.tableofcontents | 摘要…………………………………………………………I
Abstract………………………………………………………II 目錄…………………………………………………………………III 表目錄…………………………………………………………….V 圖目錄…………………………………………………………….VI 第一章 前言………………………………………………………1 第二章 文獻回顧…………………………………………………3 第三章 材料與方法………………………………………………17 3.1試驗材料………………………………………………….17 3.1.1材料性質與無缺點試材基本力學測試…………..17 3.1.2梁、柱與接頭尺寸………………………………..19 3.2試驗方法…………………………………………………21 3.2.1實尺寸梁柱接頭試驗裝置與試驗規劃…………..21 第四章 結果與討論………………………………………………23 4.1實尺寸榫卯接頭力學行為分析………………………….23 4.1.1實驗I(CR、CC、RR)榫卯接合行為分析………...37 4.1.2實驗II(CH、CT、CS)榫卯接合行為分析………..42 4.2 推測榫卯接合受力情形……………….…..… …………..48 4.3 不同榫長對於榫卯力學強度的影響……………………..51 4.4 不同形式榫頭與其他因子對於榫卯力學強度的影響…..53 4.5 殘餘強度與勁度的比較…………………………………...56 4.6 不同實驗迴歸值之比較…………...……………………….59 第五章 結論…..……………………..………………………………62 第六章 參考文獻……………………………………………………64 | |
dc.language.iso | zh-TW | |
dc.title | 中國傳統建築直榫木接頭力學行為研究 | zh_TW |
dc.title | Studies on Mechanical Behavior of the Tenon and Mortise Wood Joint of Chinese Traditional Construction | en |
dc.type | Thesis | |
dc.date.schoolyear | 94-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃世建,王松永,王怡仁,葉民權 | |
dc.subject.keyword | 大木結構,杉木,榫卯,最大彎矩,旋轉勁度, | zh_TW |
dc.subject.keyword | Wood structure,China fir,Tenon and mortise,Maximum moment,Rotational stiffness, | en |
dc.relation.page | 67 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2006-06-21 | |
dc.contributor.author-college | 生物資源暨農學院 | zh_TW |
dc.contributor.author-dept | 森林環境暨資源學研究所 | zh_TW |
顯示於系所單位: | 森林環境暨資源學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 1.46 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。