請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/32430
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳俊雄(Chun Hsiung Chen) | |
dc.contributor.author | Chao-Huang Wu | en |
dc.contributor.author | 吳昭篁 | zh_TW |
dc.date.accessioned | 2021-06-13T03:48:53Z | - |
dc.date.available | 2006-08-01 | |
dc.date.copyright | 2006-08-01 | |
dc.date.issued | 2006 | |
dc.date.submitted | 2006-07-25 | |
dc.identifier.citation | [1] B. Easter and K. A. Merza, “Parallel-coupled-line filters for inverted-microstrip and suspended-substrate MICs,” in Proc. 11th European Microwave Conf., Oct. 1981, pp. 164–167.
[2] C.-Y. Chang and T. Itoh, “A modified parallel-coupled filter structure that improves the upper stopband rejection and response symmetry,” IEEE Trans. Microwave Theory Tech., vol. 39, no. 2, pp.310-314, Feb. 1991. [3] K. F. Chang and K. W. Tam, “Miniaturized cross-coupled filter with second and third spurious responses suppression,” IEEE Microwave Wireless Compon. Lett., vol. 15, no. 2, pp. 122–124, Feb. 2005. [4] M. Sagawa, M. Makimoto, and S. Yamashita, “Geometrical structures and fundamental characteristics of microwave stepped-impedance resonators,” IEEE Trans. Microwave Theory Tech., vol. 45, no. 7, pp. 1078-1085, July 1997. [5] S.-Y. Lee and C.-M. Tsai, “New cross-coupled filter design using improved hairpin resonators,” IEEE Trans. Microwave Theory Tech., vol. 48, no. 10, pp. 2482-2490, Dec. 2000. [6] S.-C. Lin, Y.-S. Lin, and C. H. Chen, “Compact microstrip bandpass filters with quarter-wavelength stepped-impedance resonators,” in Proc. 35th European Microwave Conf., Oct. 2005, pp.931-934. [7] J. S. Wong, “Microstrip tapped-line filter design,” IEEE Trans. Microwave Theory Tech., vol. 27, no. 1, pp. 44-50, Jan. 1979. [8] R. J. Wenzel, “Synthesis of combline and capacitively loaded interdigital bandpass filters of arbitrary bandwidth,” IEEE Trans. Microwave Theory Tech., vol. 19, no. 8, pp. 678-786, July 1971. [9] G. L. Matthaei, “Interdigital band-pass filters”, IEEE Trans. Microwave Theory Tech., vol. 10, no. 6, pp. 479-491, July 1962. [10] C.-Y. Chang, C.-C. Chen, and H.-J. Huang, “Folded quarter-wave resonator filters with Chebyshev, flat group delay, or quasi-elliptic function response,” in 2002 IEEE MTT-S Int. Microwave Symp. Dig., 2002, pp.1609-1612. [11] C.-C. Chen, Y.-R. Chen, and C.-Y. Chang, “Miniaturized microstrip cross-coupled filters using quarter-wave or quasi-quarter-wave resonators,” IEEE Trans. Microwave Theory Tech., vol. 51, no. 1, pp. 120-131, Jan. 2003. [12] C.-Y. Chang and C.-C. Chen, “A novel coupling structure suitable for cross-coupled filters with folded quarter-wave resonators,” IEEE Microwave Wireless Compon. Lett., vol. 13, no. 12, pp. 517-519, Dec. 2003. [13] C.-H. Wang, Y.-S. Lin, and C. H. Chen, “Novel inductance-incorporated microstrip coupled-line bandpass filters with two attenuation poles,” in 2004 IEEE MTT-S Int. Microwave Symp. Dig., June, 2004, pp. 1979–1982. [14] I. J. Bahl, “Capacitively compensated high performance parallel coupled microstrip filters,” in 1989 IEEE MTT-S Int. Microwave Symp. Dig., June, 1989, pp. 679-682. [15] A. Riddle, “High performance parallel coupled microstrip filters,” in 1988 IEEE MTT-S Int. Microwave Symp. Dig., May, 1988, pp. 427-430. [16] J.-T. Kuo, W.-H. Hsu, and W.-T. Huang “Parallel coupled microstrip filters with suppression of harmonic response,” IEEE Microwave Wireless Comp. Lett., vol. 12, no. 10, pp.383-385, Oct. 2002. [17] T. Lopetegi, M. A. G. Laso, J. Hernandez, M. Bacaicoa, D. Benito, M. J. Garde, M. Sorolla, and M. Guglielmi, “New microstrip “wiggly-line” filters with spurious passband suppression,” IEEE Trans. Microwave Theory Tech., vol. 49, no. 9, pp.1593-1598, Sept. 2001. [18] T. Lopetegi, M. A. G. Laso, F. Falcone, F. Martin, J. Bonache, J. Garcia, L. Perz-Ceivas, M. Sorolla, and M. Guglielmi, “Microstrip ‘wiggly line’ filters with multispurious rejection,” IEEE Microwave Wireless Compon. Lett., vol. 14, no. 11, pp. 531–533, Nov. 2004. [19] J.-T. Kuo, M. Jiang, and H.-J. Chang, “Design of parallel-coupled microstrip filters with suppression of spurious resonances using substrate suspension,” IEEE Trans. Microwave Theory Tech., vol. 52, no. 1, pp.83-89, Jan. 2004. [20] J.-T. Kuo and M. Jiang, “Enhanced microstrip filter design with a uniform dielectric overlay for suppressing the second harmonic response,” IEEE Microwave Wireless Compon. Lett., vol. 14, no. 9, pp. 419–421, Sep. 2004. [21] M. d. C. Velazquez-Ahumada, J. Martel, and F. Medina, “Parallel coupled microstrip filters with ground-plane aperture for spurious band suppression and enhanced coupling,” IEEE Trans. Microwave Theory Tech., vol. 52, no. 3, pp. 1082-1086, Mar. 2004. [22] J. Garcia-Garcia, F. Martin, F. Falcone, J. Bonache, I. Gil, T. Lopetegi, M.A.G. Laso, M. Sorolla, and R. Marques, “ Spurious passband suppression in microstrip coupled line band pass filters by means of split ring resonators,” IEEE Microwave Wireless Comp. Lett., vol. 14, no. 10, pp.416-418, Sept. 2004. [23] J. Garcia-Garcia, F. Martin, F. Falcone, J. Bonache, J. D. Baena, E. Amat, I. Gil, T. Lopetegi, M.A.G. Laso, J. A. M. Iturmendi, M. Sorolla, and R. Marques, “Microwave Filters With Improved Stopband Based on Sub-Wavelength Resonators,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 6, pp.1997-2006, June, 2005. [24] J.-T. Kuo, S.-P. Chen, and M. Jiang, “Parallel-coupled microstrip filters with over-coupled end stages for suppression of spurious responses,” IEEE Microwave Wireless Comp. Lett., vol. 13, no. 10, pp.440-442, Oct. 2003. [25] P. Cheong, S.-W. Fok, and K.-W. Tam, “Miniaturized parallel coupled-line bandpass filter with spurious-response suppression,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 5, pp.1810-1816, May, 2005. [26] S.-M. Wang, C.-H. Chi, M.-Y. Hsieh, C.-Y. Chang “Miniaturized spurious passband suppression microstrip filter using meandered parallel coupled lines,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 2, pp.747-753, Feb. 2005. [27] J.-T. Kuo and E. Shih “Microstrip stepped impedance resonator bandpass filter with an extended optimal rejection bandwidth,” IEEE Trans. Microwave Theory Tech., vol. 51, no. 5, pp.1554-1559, May. 2003. [28] F.-R. Yang, K.-P. Ma, Y. Qian, and T. Itoh, “A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuits,” IEEE Trans. Microwave Theory Tech., vol. 47, no. 8, pp. 1509–1514, Aug. 1999. [29] W. M. Fathelbab, and M. B. Steer, “Parallel-coupled line filters with enhanced stopband performances,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 12, pp. 3774–3781, Dec. 2005. [30] M. Sagawa, M. Makimoto, and S. Yamashita, “A design method of bandpass filters using dielectric-filled coaxial resonators,” IEEE Trans. Microwave Theory Tech., vol.33, no. 2, pp.152-157, Feb 1985. [31] P.-H. Deng, S.-C. Lin, Y.-S. Lin, C.-H. Wang, and C. H. Chen, “Microstrip bandpass filters with dissimilar resonators for suppression of spurious responses”, in Proc. 35th European Microwave Conf., Oct. 2005, pp.1263-1266. [32] C.-F. Chen, T.-Y. Huang, and R. B. Wu, “Design of microstrip bandpass filters with multiorder spurious-mode suppression,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 12, pp. 3788-3793, December 2005. [33] S.-C. Lin, P.-H. Deng, Y.-S. Lin, C.-H. Wang, and C. H. Chen, “Wide-stopband microstrip bandpass filters using dissimilar quarter-wavelength stepped-impedance resonators,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 3, pp. 1011-1018, March 2006. [34] K. U-yen, E. J. Wollack, T. A. Doiron, J. Papapolymerou, and J. Laskar, “A planar bandpass filter design with wide stopband using double split-end stepped-impedance resonators,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 3, pp. 1237-1244, March 2006. [35] D. Zhang, G.-C. Liang, C. F. Shih, Z. H. Lu, and M. E. Johansson, “A 19-pole cellular bandpass filter using 75-mm-diameter high-temperature superconducting thin films,” IEEE Microwave Guided Wave Lett., vol. 5, no. 11, pp. 405–407, Nov. 1995. [36] M. S. Gashinova, M. N. Goubina, G. Zhang, I. A. Kolmakov, Y. A. Kolmakov, and I. B. Vendik, “High-Tc superconducting planar filter with pseudo-Chebyshev characteristic,” IEEE Trans. Microwave Theory Tech., vol. 51, no. 3, pp. 792–795, Mar. 2003. [37] G. Tsuzuki, M. Suzuki, and N. Sakakibara, “Superconducting filter for IMT-2000 band,” IEEE Trans. Microwave Theory Tech., vol. 48, no. 12, pp. 2519–2525, Dec. 2000. [38] R. Levy, “Filters with single transmission zeros at real or imaginary frequencies,” IEEE Trans. Microwave Theory Tech., vol. 24, no. 4, pp. 172-181, Apr. 1976. [39] K. T. Jokela, “Narrow-band stripline or microstrip filters with transmission zeros at real and imaginary frequencies,” IEEE Trans. Microwave Theory Tech., vol. 28, no. 6, pp. 542-547, June. 1980. [40] J. S. Hong and M. J. Lancaster, Microstrip Filters for RF/Microwave Applications. New York: Wiley, 2001. [41] C.-F. Chen, T.-Y. Huang, and R. B. Wu, “A miniaturized net-type microstrip bandpass filter using λ/8 resonators,” IEEE Microwave Wireless Comp. Lett., vol. 15, no. 7, pp. 481-483, July, 2005. [42] C.-F. Chen, T.-Y. Huang, and R. B. Wu, “Novel compact net-type resonators and their applications to microstrip bandpass filters,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 2, pp. 755–762, Feb. 2006. [43] C. Y. Tan, L. Chen, J. Lu, X. S. Rao, and C. K. Ong, “Cross-coupled dual-spiral high-temperature superconducting filter,” IEEE Microwave Wireless Comp. Lett., vol. 13, no. 6, pp. 247-249, June, 2003. [44] G. Zhang, F. Huang and M. J. Lancaster, “Superconducting spiral filters with quasi-elliptic characteristic for radio astronomy,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 3, pp. 947-951, March, 2005. [45] F. Huang, “Superconducting spiral wide bandpass filters with wide upper stopband,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 7, pp. 2335-2339, July, 2005. [46] J. S. Hong and M. J. Lancaster, “Couplings of microstrip square open-loop resonators for cross-coupled planar microwave filters,” IEEE Trans. Microwave Theory Tech., vol. 44, no. 11, pp. 2099–2109, Nov. 1996. [47] J. S. Hong and M. J. Lancaster, “Cross-coupled microstrip hairpin-resonator filters,” IEEE Trans. Microwave Theory Tech., vol. 46, no. 1, pp. 118–122, Jan. 1998. [48] J. S. Hong and M. J. Lancaster, “Design of highly selective microstrip bandpass filters with a single pair of attenuation poles at finite frequencies,” IEEE Trans. Microwave Theory Tech., vol. 48, no. 7, pp. 1098-1107, July 2000. [49] J.-T. Kuo, M.-J. Maa and P.-H. Lu, “A microstrip elliptic function filter with compact miniaturized hairpin resonators,” IEEE Microwave Wireless Comp. Lett., vol. 10, no. 3, pp. 94-95, March, 2000. [50] U. Rosenberg, S. Amari, “Novel coupling schemes for microwave resonator filters,” IEEE Trans. Microwave Theory Tech., vol. 50, no. 12, pp. 2896-2902, Dec. 2002. [51] D. C. Rebenaque, F. Q. Pereira, J. P. Garcia, A. A. Melcon, and M. Guglielmi, “Two compact configurations for implementing transmission zeros in microstrip filters,” IEEE Microwave Wireless Comp. Lett., vol. 14, no. 10, pp. 475-477, Oct. 2004. [52] M. Guglielmi, P. Jarry, E. Kerherve, O. Roquebrun, and D. Schmitt, “A new family of all-inductive dual-mode filters,” IEEE Trans. Microwave Theory Tech, vol. 49, no. 10, pp. 1764–1769, Oct. 2001. [53] G. Macchiarella and M. Fumagalli, “Inline comb filters with one or two transmission zeros,” in 2004 IEEE MTT-S Int. Microwave Symp. Dig., June 2004, pp. 1085-1088. [54] M. Matsuo, H. Yabuki, and M. Makimoto, “The design of a half-wavelength resonator BPF with attenuation poles at desired frequencies,” in 2000 IEEE MTT-S Int. Microwave Symp. Dig., June 2000, pp. 1181-1184. [55] A. Hennings, E. Semouchkina, A. Baker, and G. Semouchkin, “Design optimization and implementation of bandpass filters with normally fed microstrip resonators loaded by high-permittivity dielectric,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 3, pp. 1253-1261, March 2006. [56] J.-R. Lee, J.-H. Cho, and S.-W. Yun, “New compact bandpass filter using microstrip λ/4 resonators with open stub inverter,” IEEE Microwave Guided Wave Lett., vol. 10, no. 12, pp. 526-527, Dec. 2000. [57] L. Zhu and W. Menzel, “Compact microstrip bandpass filter with two transmission zeros using a stub-tapped half-wavelength line resonator,” IEEE Microwave Wireless Comp. Lett, vol. 13, no. 1, pp. 16-18, Jan 2003. [58] Y.-M. Yan, Y.-T. Chang, H. Wang, R.-B. Wu, and C. H. Chen, 'Highly selective microstrip bandpass filters in Ka band,' in Proc. 32th European Microwave Conf., Oct. 2002, pp. 1137-1140. [59] C.-M. Tsai, S.-Y Lee, and C-C Tsai, “Performance of a planar filter using a 0° feed structure,” IEEE Trans. Microwave Theory Tech., vol. 50, no. 10, pp. 2362-2367, Oct. 2002. [60] L.-H. Hsieh, and K. Chang, “Tunable microstrip bandpass filters with two transmission zeros,” IEEE Trans. Microwave Theory Tech., vol. 51, no. 2, pp. 520-525, Feb. 2003. [61] C.-K. Liao, and C.-Y. Chang, “Design of microstrip quadruplet filters with source-load coupling,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 7, pp.2302-2308, July 2005. [62] P.-H. Deng, Y.-S. Lin, C.-H. Wang and C. H. Chen, “Compact microstrip bandpass filters with good selectivity and stopband rejection,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 2, pp.533-539, Feb. 2006. [63] C. P. Wen, “Coplanar waveguide: a surface strip transmission line suitable for nonreciprocal gyromagnetic device applications,” IEEE Trans. Microwave Theory Tech., vol. 17, no. 12, pp. 1087-1090, Dec. 1969. [64] D. F. Williams and S. E. Schwarz, “Design and performance of coplanar waveguide bandpass filters,” IEEE Trans. Microwave Theory Tech., vol. 83, no. 7, pp. 558-566, July 1983. [65] J. K. A. Everard and K. K. M. Cheng, “High performance direct coupled bandpass filters on coplanar waveguide,” IEEE Trans. Microwave Theory Tech., vol. 41, no. 9, pp. 1568-1573, Sept. 1993. [66] A. Vogt and W. Jutzi, “An HTS narrow bandwidth coplanar shunt inductively coupled microwave bandpass filter on LaAlO3,” IEEE Trans. Appl. Supercond., vol. 45, pp. 492-497, April 1997. [67] S. Uysal, “Coplanar waveguide edge-coupled bandpass filters with finite ground planes,” Electron. Lett., vol. 33, no. 5, pp. 375-376, Feb. 1997. [68] F.-L. Lin, C.-W. Chiu, and R.-B. Wu, “Coplanar waveguide bandpass filter – a ribbon-of-brick-wall design,” IEEE Trans. Microwave Theory Tech., vol. 43, no. 7, pp.1589-1596, July 1995. [69] T. M. Weller, “Edge-coupled coplanar waveguide bandpass filter design,” IEEE Trans. Microwave Theory Tech., vol. 48, no. 12, pp. 2453-2458, Dec. 2000. [70] K. Wada and I. Awai, “Heuristic models of half-wavelength resonator bandpass filter with attenuation poles,” Electron. Lett., vol. 35, no. 5, pp. 401-402, March 1999. [71] J.-S. Chih, C.-H. Wang, Y.-S. Lin, and C. H. Chen,“Coplanar-waveguide coupled-line bandpass filter with attenuation poles in upper and lower rejection bands,” in Proc. 2003 Asia-Pacific Microwave Conf., Nov. 2003, pp. 1489-1492. [72] T. Tsujiguchi, H. Matsumoto, and T. Nishikawa, “A miniaturized end-coupled bandpass filter using λ/4 hairpin coplanar resonators,” in 1998 IEEE MTT-S Int. Microwave Symp. Dig., June 1998, pp. 829-832. [73] J. Zhou, M. J. Lancaster, and F. Huang, “Coplanar quarter wavelength quasi-elliptic filters without bond-wire bridges,” IEEE Trans. Microwave Theory Tech., vol. 52, no. 4, pp. 1150-1156, April 2004. [74] T. Tsujiguchi, H. Matsumoto, and T. Nishikawa, “A miniaturized double-surface CPW bandpass filter improved spurious responses,” IEEE Trans. Microwave Theory Tech., vol. 49, no. 5, pp. 879–885, May 2001. [75] J. Gao and L. Zhu, “Asymmetric parallel-coupled CPW stages for harmonic suppressed λ/4 bandpass filters,” Electron. Lett., vol.40, no. 18, pp.1122-1123, Sept. 2004. [76] S.-C. Lin, T.-N. Kuo, Y.-S. Lin and C. H. Chen, “Novel coplanar-waveguide bandpass filters using loaded air-bridge enhanced capacitors and broadside-coupled transition structures for wide-band spurious suppression,” accepted for publication in the IEEE Trans. Microwave Theory Tech. [77] C.-H. Wu, C.-H. Wang, Y.-S. Lin and C. H. Chen, “Novel microstrip coupled-line bandpass filters with shortened coupled sections for stopband extension,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 2, pp.540-546, Feb. 2006. [78] Y.-S. Lin, C.-H. Wang, C.-H. Wu and C. H. Chen, “Novel compact parallel-coupled microstrip bandpass filters with lumped-element K-inverters,” IEEE Trans. Microwave Theory Tech., vol. 53, no. 7, pp.2324-2328, July 2005. [79] C.-H. Wu, Y.-S. Lin, C.-H. Wang and C. H. Chen, “Compact microstrip coupled-line bandpass filter with four transmission zeros,” IEEE Microwave Wireless Comp. Lett., vol. 15, no. 9, pp.579-581, Sept. 2005. [80] C.-H. Wu, Y.-S. Lin, C.-H. Wang, and C. H. Chen, “Compact microstrip bandpass filter with two transmission zeros based on one-eighth wavelength coupled-line sections,” in Proc. 35th European Microwave Conf., Oct. 2005, pp. 1283-1286. [81] C.-H. Wu, Y.-S. Lin, C.-H. Wang, and C. H. Chen, “Compact microstrip coupled-line bandpass filter with two cross-couplings for creating multiple transmission zeros,” in Proc. 35th European Microwave Conf., Oct. 2005, pp. 1267-1270. [82] C.-H. Wu, Y.-S. Lin, C.-H. Wang, and C. H. Chen, “Compact microstrip parallel-coupled bandpass filters with multiple transmission zeros,” accepted for publication in Proc. 36th European Microwave Conf., Oct. 2006. [83] Y.-S. Lin, C.-H. Wu, and C.-H. Chen, “Novel compact coupled-line bandpass filters based on quarter-wavelength resonators,” in 2004 Asia-Pacific Microwave Conference Abstracts, pp. 15. [84] C.-H. Wu, Y.-S. Lin and C. H. Chen, “Parallel-coupled coplanar-waveguide bandpass filters based on quarter-wavelength resonators,” submitted to IEEE Trans. Microwave Theory Tech., May 2006. [85] M. Makimoto and S. Yamashita, “Bandpass filters using parallel coupled stripline stepped impedance resonators,” IEEE Trans. Microwave Theory Tech., vol. 28, no. 12, pp. 1413-1417, Dec. 1980. [86] G. L. Mattaei, L. Young, and E. M. T. Jones, Microwave Filters, Impedance-Matching Networks, and Coupling Structures. Norwood, MA: Artech House, 1980. [87] D. M. Pozar, Microwave Engineering, 2nd ed. New York: Wiley, 1998. [88] G. L. Mattaei, “Direct-coupled, band-pass filters with λo/4 resonators,” 1958 IRE National Convention Record, Part 1, pp. 98-111. [89] A. E. Ruehli, “Inductance calculations in a complex integrated circuit environment,” IBM J. Res. Develop., vol. 16, pp. 470–481, Sept. 1972. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/32430 | - |
dc.description.abstract | 本論文提出一系列具有延伸截止帶與較佳選擇度之耦合線帶通濾波器,其中包含了數個微帶線架構與兩個共面波導濾波器。這些濾波器可分別運用於不同需求之無線通訊系統中。
首先,根據濾波器之基本理論及耦合節線之等效電路,在第二章提出基本型之耦合線帶通濾波器。藉由在傳統耦合線帶通濾波器中加入集總元件反轉器, 基本型耦合線帶通濾波器之階數可增加為傳統耦合線帶通濾波器的兩倍,並且不會增加電路面積與產生双倍頻效應。 在延伸截止帶方面,根據基本型之耦合線帶通濾波器,在第三章運用縮短型耦合節線之內在傳輸零點來抑制奇數倍之倍頻響應,並藉此發展出具有延伸截止帶之新型微帶線耦合帶通濾波器。此方法具有不會增加電路面積與植入損耗之優點。 在改善選擇度方面,第四章提出數個微小型微帶線耦合帶通濾波器,並且運用電容性或電感性之交叉耦合來產生多數個傳輸零點。並且傳輸零點之頻率可藉由變化交插耦合之電容或電感值來調整,以便改善濾波器之選擇度。 最後,為了克服微帶線架構之缺點,第五章提出兩個具有良好選擇度與截止帶響應之微小型耦合線共面波導帶通濾波器。與傳統型耦合線帶通濾波器運用了二分之一波長共振器來比較,由於此共面波導帶通濾波器運用了四分之一波長之共振器來實現,所以尺寸只有傳統型濾波器之ㄧ半,而且不會在兩倍中心頻率處產生倍頻效應。另外,此共面波導帶通濾波器也採用了第三章與第四章之概念來達到延伸截止帶與較佳選擇度之目標。 | zh_TW |
dc.description.abstract | In this dissertation, a new class of coupled-line bandpass filters (BPFs) with stopband extension and better selectivity, including several microstrip and two coplanar-waveguide (CPW) structures, is presented. These BPFs can find applications in various wireless communication systems.
First of all, in Chapter 2, the basic coupled-line BPFs are proposed according to the fundamental concepts of filters and equivalent-circuit models of coupled-line sections. By adding the lumped-element-inverters into conventional coupled-line BPFs, the order of proposed coupled-line BPFs are double of conventional coupled-line BPFs without increasing the circuit area, and no repeated passband is observed at twice center frequency. For the stopband extension, in Chapter 3, the basic coupled-line BPFs are extended to implement the novel microstrip coupled-line BPFs with extended rejection band, using the transmission zeros inherently associated with the shortened coupled sections to suppress the odd spurious harmonics. This technique has the advantage of compact circuit size without increasing the insertion loss. For the selectivity improvement, several compact microstrip coupled-line BPFs with capacitive or inductive cross-couplings to create multiple transmission zeros are proposed in Chapter 4. The locations of transmission zeros can be adjusted by varying the values of cross-coupled capacitances or inductances so as to improve the filter selectivity. Finally, in order to overcome the drawbacks of microstrip structures, two compact coupled-line coplanar-waveguide bandpass filters with good selectivity and stopband responses are proposed in Chapter 5. By using the quarter-wavelength resonators in implementation, the filter size can be reduced by half and no spurious passband is observed at twice the center frequency when compared with the conventional parallel-coupled bandpass filters based on half-wavelength resonators. In addition, the concepts in Chapters 3 and 4 are also adopted in the CPW filters design so as to achieve stopband extension and better selectivity. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T03:48:53Z (GMT). No. of bitstreams: 1 ntu-95-F91942049-1.pdf: 1497682 bytes, checksum: a310b0b53d305a950cd9359595b9173d (MD5) Previous issue date: 2006 | en |
dc.description.tableofcontents | Abstract (Chinese) Ⅰ
Abstract (English) Ⅱ Contents Ⅳ List of Figures Ⅷ Chapter 1. Introduction 1 1-1 Research Motivation…..………………………..…..………..…… 1 1-2 Literature Survey...............................................................................2 1-3 Contributions.....................................................................................7 1-4 Chapter Outlines………..……………...………….……………..…8 Chapter 2. Basic Concepts and Coupled-Line Bandpass Filters 11 2-1 Insertion Loss Method……..…………………………..……….....11 2-2 Lowpass Prototype Filters and Elements........................................12 2-2.1 Butterworth Lowpass Prototype Filters……………………..13 2-2.2 Chebyshev Lowpass Prototype Filters………………………13 2-3 Frequency and Element Transformations........................................14 2-4 Impedance or Admittance Inverters................................................16 2-4.1 Filters with Impedance or Admittance Inverters…...………..16 2-4.2 Practical Realization of Impedance and Admittance Inverters……………………………………………………..18 2-5 General Principle of Coupled-Line Filters......................................19 2-5.1 Coupled-Line Equivalent Circuits…………….…...………..19 2-5.2 Modified Equivalent-Circuits Models of Coupled-Line Sections……………………………………………………...21 2-6 Basic Coupled-Line Bandpass Filters Based on Quarter-Wavelength Resonators…………………………………………….………….23 2-7 Basic Parallel-Coupled Microstrip Bandpass Filters With Lump-Element K Inverters……………………………………….24 2-7.1 Fourth-Order Bandpass Filter……………………………….24 2-7.2 Filter Size Reduction………………………………………...26 2-8 Conclusions…………………………….......................................28 Chapter 3. Novel Microstrip Coupled-Line Bandpass Filters With Shortened Coupled Sections for Stopband Extension 42 3-1 Introduction……..…………………………..……………….........42 3-2 Second-Order Bandpass Filter……………………………………43 3-2.1 Filter Structure………………………………………..……..43 3-2.2 Transmission Zeros………………………………………….45 3-2.3 Filter Implementation and Results…………………………..47 3-3 Fourth-Order Bandpass Filter…………………………………….48 3-3.1 Filter Structure………………………………………..……..48 3-3.2 Filter Implementation and Results…………………………..50 3-4 Conclusions…………………………….......................................50 Chapter 4. Compact Microstrip Coupled-Line Bandpass Filters With Multiple Transmission Zeros 61 4-1 Introduction……..…………………………..……………….........61 4-2 Second-Order Bandpass Filter Based on λ/8 Coupled-Line Section……………………………………………………………62 4-3 Fourth-Order Bandpass Filter Based on λ/8 Coupled-Line Section …………………………………………………………...64 4-3.1 Filter Structure………………………………………..……...64 4-3.2 Transmission Zeros………………………………………….65 4-3.3 Filter Implementation and Results…………………………..65 4-4 Fourth-Order Bandpass Filter With Lump- Element K Inverters...67 4-5 Conclusions…………………………….......................................69 Chapter 5. Parallel-Coupled Coplanar-Waveguide Bandpass Filters Based on Quarter-Wavelength Resonators 82 5-1 Introduction……..…………………………..……………….........82 5-2 Second-Order Bandpass Filter……………………………………83 5-2.1 Filter Structure and Circuit Model…………………………..83 5-2.2 Selectivity Improvement…………………………………….86 5-2.3 Filter Design Procedure……………………………………...87 5-2.4 Filter Implementation and Results…………………………..88 5-3 Fourth-Order Bandpass Filter…………………………………….90 5-3.1 Filter Structure and Implementation………………..……..90 5-3.2 Transmission Zeros and Filter Results………………………92 5-4 Conclusions…………………………….......................................93 Chapter 6. Conclusions 105 6-1 Summary………………………………………………………...105 6-2 Future Works…………………………………………………….106 REFERENCES 108 | |
dc.language.iso | en | |
dc.title | 具寬截止帶與傳輸零點之耦合線帶通濾波器 | zh_TW |
dc.title | Coupled-Line Bandpass Filters With Stopband Extension and Multiple Transmission Zeros | en |
dc.type | Thesis | |
dc.date.schoolyear | 94-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 吳瑞北(Ruey-Beei Wu),王暉(Huei Wang),莊晴光(Ching-Kuang C.Tzuang),郭仁財(Jen-Tsai Kuo),張志揚(Chi-Yang Chang),毛紹綱(Shau-Gang Mao),林祐生(Yo-Shen Lin) | |
dc.subject.keyword | 濾波器,耦合線,傳輸零點,截止帶, | zh_TW |
dc.subject.keyword | filter,coupled-line,transmission zeros,stopband extension, | en |
dc.relation.page | 117 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2006-07-26 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 1.46 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。