請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31975
標題: | 多埠校準方法:穿透-非對稱反射-不等長線 Thru-Reflection-unequal-Line (TRuL) calibration method with asymmetric R calibrator |
作者: | Yien-Tien Chou 周晏田 |
指導教授: | 盧信嘉(Hsin-Chia Lu) |
關鍵字: | 多埠校準方法, multimode TRL calibration,TRuL, |
出版年 : | 2006 |
學位: | 碩士 |
摘要: | 要使用傳統的多模TRL校準方法有一個先決條件,就是訊號在傳輸線中傳遞時,不同模態的傳播常數必須不同,然而,一般來說,在多埠網路中,每一個埠中的傳播常數可能相等。因此針對在相同傳播常數的狀況,我們提出穿透-非對稱反射-不等長線多埠校準方法。在校準過程中,使用不等長線來產生不同特徵值,這個步驟可以大大的簡化計算量。而非對稱反射較準器被使用來簡化正負號的判定。以FR4及Rogers RO4003C製作的分支偶合器來驗證TRuL校準方法,可發現散射矩陣的量測值和模擬值非常的符合。 The multimode TRL calibration methods is known as an approach for the measurement of multi-conductor transmission line devices. The propagation constants of different modes propagating along the multi-conductor transmission line must be different when using this method. However, in general multi-port networks, the propagating constants at each port may be equal. The thru-reflection-unequal-line (TRuL) calibration method with asymmetric R calibrator for the calibration of the equal propagation constant case is proposed. Lines of unequal length are used to make the eigenvalues unequal during calibration process. This will greatly simplify the calculation. Asymmetric “R” calibrator is proposed to simplify the sign ambiguity resolution process. The measured scattering matrices of a branch line coupler on FR4 and Rogers RO4003C substrate using proposed “TRuL” calibration method shows good agreement with EM simulation. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31975 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 1.59 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。