請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31470
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 吳乃立(Nae-Lih Wu) | |
dc.contributor.author | Chun-Chih Chang | en |
dc.contributor.author | 張鈞智 | zh_TW |
dc.date.accessioned | 2021-06-13T03:13:26Z | - |
dc.date.available | 2009-07-27 | |
dc.date.copyright | 2007-07-27 | |
dc.date.issued | 2006 | |
dc.date.submitted | 2006-08-17 | |
dc.identifier.citation | [1] Jürgen O. Besenhard (Ed.), Handbook of Battery Materials, WILEY-VCH, 1998.
[2] Steven S. Zumdahl, Chemical Principles, 3rd ed., ch. 11, Houghton Mifflin, 1998. [3] http://en.wikipedia.org/wiki/Image:Galvanic_cell.png#file [4] http://en.wikipedia.org/wiki/Fuel_cell [5] http://www.atp.nist.gov/eao/wp05-01/append-4.htm [6] http://products.sel.sony.com/semi/energy/aboutbat.html [7] G.-A. Nazri and G. Pistoia (Eds.), Lithium Batteries: Science and Technology, Kluwer Academic Publishers, 2004. [8] J.-M. Tarascon and M. Armand, Issues and Chanllenges Facing Rechargeable Lithium Batteries, Nature, 414, 359-367(2001). [9] J. L. Tirado, Inorganic Materials for Negative Electrode of Lithium-ion Batteries: State of the Art and Future Prospects, Materials Science & Engineering Reports, 40, 103-136(2003). [10] http://www.benbest.com/cryonics/lessons.html [11] E. Buiel, Lithium Insertion in Hard Carbon Anode Materials for Li-ion Batteries, doctorate thesis, 1998. [12] Y.-C. Chang, H.-C. Sohn, C.-H. Ku, Y.-G. Wang, Y. Korai, and I. Mochida, Anodic Performances of Mesocarbon Mesobeads (MCMB) Prepared from Synthetic Naphthalene Isotropic Pitch, Carbon, 37, 1285-1297(1999). [13] M. Winter and J. O. Besenhard, Electrochemical Lithiation of Tin and Tin-based Intermetallics and Composites, Electrochim. Acta, 45, 31-50(1999). [14] W.-R. Liu, Synthesis and Characterization of Si-based Anode Materials for Lithium Ion Batteries, doctorate thesis, 2006. [15] W.-R. Liu, M.-H. Yang, H.-C. Wu, S. M. Chiao, and N.-L. Wu, Enhanced Cycle Life of Si-Anode for Li-Ion Batteries by Using Modified Elastomeric Binder, Electrochem. Solid-State Lett., 8, A100-A103(2005). [16] W.-R. Liu, J.-H. Wang, H.-C. Wu, D.-T. Shieh, M.-H Yang, and N.-L. Wu, Electrochemical Characterizations on Si and C-Coated Si Particle Electrodes for Lithium-Ion Batteries, J. Electrochem. Soc., A1719-A1725(2005). [17] W.-R Liu, Z.-Z. Guo, W.-S. Young, D.-T. Shieh, H.-C. Wu, M.-H. Yang, N.-L. Wu, Effect of Electrode Structure on Performance of Si Anode in Li-Ion Batteries: Si Particle Size and Conductive Additive, J. Power Sources, 140, 139-144(2005). [18] W.-R. Liu, Z.-Z. Guo, D.-T. Shieh, H.-C. Wu, M.-H. Yang, and N.-L. Wu, Investigation on Structural Factors of Cycling Stability for Si Anode, IBA meeting at Grazel, April 2004. [19] L. Aldon, P. Kubiak, M. Womes, J. C. Jumas, J. Oliver-Fourcade, J. L. Tirado, J. I. Corredor, and C. Pérez Vicente, Chemical and Electrochemical Li-Insertion into the Li4Ti5O12 Spinel, Chem. Mater., 16, 5721-5725(2004). [20] S. Huang, Z. Wen, X. Zhu, and Z. Gu, Preparation and Electrochemical Performance of Ag Doped Li4Ti5O12, Electrochem. Commun., 6, 1093-1097(2004). [21] L. Kavan, M. Kalbác, M. Zukalová, I. Exnar, V. Lorenzen, R. Nesper, and M. Graetzel, Lithium Storage in Nanostructured TiO2 Made by Hydrothermal Growth, Chem. Mater., 16, 477-485(2004). [22] C. Arbizzani, M. Lazzari, and M. Mastragostino, Recent Trends in Research Activity on Lithium-Ion Batteries, J. Power Sources, 146, 3-9(2005). [23] M. Broussely, P. Biensan, and B. Simon, Lithium Insertion into Host Materials: The Key to Success for Li Ion Batteries, Electrochim. Acta, 45, 3-22(1999). [24] http://www.phy.cmich.edu/people/petkov/nano.html [25] Z. Chen and J. R. Dahn, Methods to Obtain Excellent Capacity Retention in LiCoO2 Cycled to 4.5 V, Electrochim. Acta, 49, 1079-1090(2004). [26] 林振華,林振富,充電式鋰離子電池-材料與應用,全華科技圖書股份有限公司,2001。 [27] P. Kalyani and N. Kalaiselvi, Various Aspects of LiNiO2 Chemistry: A Review, Sci. Tech. Adv. Mater., 6, 689-703(2005). [28] G. Amatucci, A. Du Pasquier, A. Blyr, T. Zheng, and J.-M. Tarascon, The Elevated Temperature Performance of The LiMn2O4/C System: Failure and Solutions, Electrochim. Acta, 45, 255-271(1999). [29] Y.-M. Lin, H.-C Wu, Y.-C Yen, Z.-Z. Guo, M.-H Yang, H.-M Chen, H.-S. Sheu, and N.-L. Wu, Enhanced High-Rate Cycling Stability of LiMn2O4 Cathode by ZrO2 Coating for Li-Ion Battery, J. Electrochem. Soc., 152, A1526-A1532(2005). [30] K. Kang, Y. S. Meng, J. Bréger, C. P. Grey, and G. Ceder, Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries, Science, 331, 977-980(2006). [31] A. K. Padhi, K. S. Nanjundaswamy, and J. B. Goodenough, Phospho-olivines as Positive-Electrode Materials for Rechargeable Lithium Batteries, J. Electrochem. Soc., 144, 1188-1194(1997). [32] V. A. Streltsov, E. L. Belokoneva, V. G. Tsirelson, and N. K Hansen, Multipole Analysis of the Electron Density in Triphylite, LiFePO4,Using X-ray Diffraction Data, Acta Cryst. B49, 147-153(1993). [33] A. K. Padhi, K. S. Nanjundaswamy, C. Masquelier, S. Okada, and J. B. Goodenough, Effect of Structure on the Fe3+/Fe2+ Redox Couple in Iron Phosphates, J. Electrochem. Soc., 144, 1609-1613(1997). [34] C. Masquelier, A. K. Padhi, K. S. Nanjundaswamy, and J. B. Goodenough, New Cathode Materials for Rechargeable Lithium Batteries: The 3-D Framework Structures Li3Fe2(XO4)3 (X=P, As), J. Solid State Chem., 135, 228-234(1998). [35] A.K. Padhi, V. Manivannan, and J. B. Goodenough, Tuning the Position of the Redox Couples in Materials with NASICON Structure by Anionic Substitution, J. Electrochem Soc., 145, 1518-152-(1998). [36] A. S. Andersson, B. Kalska, L. Häggström, and J. O. Thomas, Lithium Extraction/Insertion in LiFePO4: an X-ray Diffraction and Mössbauer Spectroscopy Study, Solid State Ionics, 130, 41-52(2000). [37] F. Zhou, K. Kang, T. Maxisch, G. Ceder, and D. Morgan, The Electronic Structure and Band Gap of LiFePO4 and LiMnPO4, Solid State Commun., 132, 181-186(2004). [38] A. Deb, U. Bergmann, E. J. Cairns, and S. P. Cramer, Structural Investigation of LiFePO4 Electrodes by Fe X-ray Absorption Spectroscopy, J. Phys. Chem. B, 108, 7046-7051(2004). [39] A. S. Andersson, J. O. Thomas, B. Kalska, and L. Häggström, Thermal Stability of LiFePO4-Based Cathodes, Electrochem. Solid-State Lett., 3, 66-68(2000). [40] M. Takahashi, S. Tobishima, K. Takei, and Y. Sakurai, Reaction Behavior of LiFePO4 as a Cathode Material for Rechargeable Lithium Batteries, Solid State Ionics, 148, 283-289(2002). [41] A. Yamada, S.-C. Chung, and K. Hinokuma, Optimized LiFePO4 for Lithium Battery Cathodes, J. Electrochem. Soc., 148, A224-A229(2001). [42] H. Huang, S.-C Yin, and L. F. Nazar, Approaching Theoretical Capacity of LiFePO4 at Room Temperature at High Rates, Electrochem. Solid-State Lett., 4, A170-A172(2001). [43] S. Franger, F. Le Cras, C. Bourbon, and H. Rouault, LiFePO4 Synthesis Routes for Enhanced Electrochemical Performance, Electrochem. Solid-State Lett., 5, A231-A233(2002). [44] X.-Z. Liao, Z.-F. Ma, L. Wang, X.-M. Zhang, Y. Jiang, and Y.-S. He, A Novel Synthesis Route for LiFePO4/C Cathode Materials for Lithium-Ion Batteries, Electrochem. Solid-State Lett., 7, A522-A525(2004). [45] D. Wang, H. Li, Z. Wang, X. Wu, Y. Sun, X. Huang, and L. Chen, New Solid-State Synthesis Routine and Mechanism for LiFePO4 using LiF as Lithium Precursor, J. Solid State Chem., 177, 4582-4587(2004). [46] C. H. Mi, X. B. Zhao, G. S. Cao, and J. P. Tu, In Situ Synthesis and Properties of Carbon-Coated LiFePO4 as Li-Ion Battery Cathodes, J. Electrochem. Soc., 152, A483-A487(2005). [47] M. Takahashi, S. Tobishima, K. Takei, and Y. Sakurai, Characterization of LiFePO4 as the Cathode Material for Rechargeable Lithium Batteries, J. Power Sources, 97-98, 508-511(2001). [48] C. H. Mi, G. S. Cao, and X. B. Zhao, Low-Cost, One-Step Process for Synthesis of Carbon-Coated LiFePO4 Cathode, Mater. Lett., 59, 127-130(2005). [49] C. R. Sides, F. Croce, V. Y. Young, C.R. Martin, and B. Scrosati, A High-Rate, Nanocomposite LiFePO4/Carbon Cathode, Electrochem. Solid-State Lett., 8, A484-A487(2005). [50] G.X. Wang, S. Bewlay, S. A. Needham, H. K. Liu, R. S. Liu, V. A. Drozd, J.-F. Lee, and J. M. Chen, Synthesis and Characterization of LiFePO4 and LiTi0.01Fe0.99PO4 Cathode Materials, J. Electrochem. Soc., 153, A25-A31(2006). [51] Y. Hu, M. M. Doeff, R. Kotstecki, and R. Fiñonse, Electrochemical Performance of Sol-Gel Synthesized LiFePO4 in Lithium Batteries, J. Electrochem. Soc., 151, A1279-A1285(2004). [52] K. Dokko, K. Shiraishi, and K. Kanamura, Identification of Surface Impurities on LiFePO4 Particles Prepared by a Hydrothermal Process, J. Electrochem. Soc., 152, A2199-A2202(2005). [53] S. Yang, Y. Song, P. Y. Zavalij, M. S. Whittingham, Reactivity, Stability and Electrochemical Behavior of Lithium Iron Phosphates, Electrochem. Commun., 4, 239-244(2002). [54] S.-T Myung, S. Komaba, R. Takagai, N. Kumagai, and Y.-S. Lee, Emulsion Drying Preparation of LiFePO4/C Composite and Its Enhanced High-Rate Performance at 50oC, Chem. Lett., 32, 566-567(2003). [55] S.-T Myung, S. Komaba,N. Hirosaki, H. Yashiro, and N. Kumagai, Emulsion Drying Synthesis of Olivine LiFePO4/C Composite and Its Electrochemical Properties as Lithium Intercalation Material, Electrochim. Acta, 49, 4213-42222(2004). [56] T.-H. Cho and H.-T. Chung, Synthesis of Olivine-Type LiFePO4 by Emulsion-Drying Method, J. Power Sources, 133, 272-276(2004). [57] K. S. Park, J. T. Son, H. T. Chung, S. J. Kim, C. H. Lee, and H. G. Kim, Synthesis of LiFePO4 by Co-Precipitation and Microwave Heating, Electrochem. Commun., 5, 839-842(2003). [58] P. P. Prosini, M. Carewska, S. Scaccia, P. Wisniewski, M. Pasquali, Long-Term Cyclability of Nanostructured LiFePO4¬, Electrochim. Acta, 48, 4205-4211(2003). [59] J. Lu, Z. Tang, Z. Zhang, and W. Shen, Structural and Electrochemical Properties of Multihollow LiFePO4 for Lithium Batteries Cathodes, J. Electrochem. Soc., 152, A1441-A1444(2005). [60] A. D. Spong, G. Vitins, and J. R. Owen, A Solution-Precursor Synthesis of Carbon-Coated LiFePO4 for Li-Ion Cells, J. Electrochem. Soc., 152, A2376-A2382(2005). [61] H.-H. Chang, C.-C. Chang, H.-C. Wu, Z.-Z. Guo, M.-H. Yang, Y.-P. Chiang, H.-S. Sheu, N.-L. Wu, Kinetic Study on Low-Temperature Synthesis of LiFePO4 via Solid-State Reaction, J. Power Sources (in press). [62] S.-Y. Chung, J. T. Blocking, and Y.-M. Chiang, Electronically Conductive Phospho-olivines as Lithium Strorage Electrodes, Nat. Mater., 1, 123-128(2002). [63] C. Delacourt, L. Laffont, R. Bouchet, C. Wurm, J.-B. Leriche, M. Morcrette, J.-M. Tarascon, and C. Masquelier, Toward Understanding of Electrical Limitations (Electronic, Ionic) In LiMPO4(M=Fe, Mn) Electrode Materials, J. Electrochem. Soc., 152, A913-A921(2005). [64] P. P. Prosini, M. Lisi, D. Zane, and M. Pasquali, Determination of the Chemical Diffusion Coefficient of Lithium in LiFePO4, Solid State Ionics, 148, 45-51(2002). [65] D. Morgan, A. Van der Ven, and G. Ceder, Li Conductivity in LixMPO4 (M= Mn, Fe, Co, Ni) Olivine Materials, Electrochem. Solid-State Lett., 7, A30-A32(2004). [66] M. Saiful Islam, D. J. Driscoll, C. A. J. Fisher, and P. R. Slater, Atomic-Scale Investigation of Defects, Dopant, and Lithium Transport in the LiFePO4 Olivine-Type Battery Material, Chem. Mater., 17, 5085-5092(2005). [67] V. Srinivasan and J. Newman, Existence of Path-Dependence in the LiFePO4 Electrode, Electrochem. Solid-State Lett., 9, A110-A114(2006). [68] N. Ravet, Y. Chouinard, J. F. Magnan, S. Besner, M. Gauthier, and M. Armand, Electroactivity of Natural and Synthetic Triphylite, J. Power Sources, 97-98, 503-507(2001). [69] Z. Chen and J. R. Dahn, Reducing Carbon in LiFePO4/C Composite Electrodes to Maximize Specific Energy, Volumetric Energy, and Tap Density, J. Electrochem. Soc., 149, A1184-A1189(2002). [70] J. Barker, M. Y. Saidi, and J. L. Swoyer, Lithium Iron(II) Phospho-olivines Prepared by a Nover Carbothermal Reduction Method, Electrochem. Solid-State Lett., 6, A53-A55(2003). [71] E. M. Bauer, C. Bellitto, M. Pasquali, P. P. Prosini, and G. Righini, Versatile Synthesis of Carbon-Rich LiFePO4 Enhancing Its Electrochemical Properties, Electrochem. Solid-State Lett., 7, A85-A87(2004). [72] S. L. Bewlay, K. Konstantinov, G. X. Wang, S. X. Dou, and H. K. Kiu, Conductivity Improvements to Spray-Produced LiFePO4 by Addition of a Carbon Source, Mater. Lett., 58, 1788-1791(2004). [73] X.-Z. Liao, Z.-F. Ma, Y.-S. He, X.-M. Zhang, L. Wang, and Y. Jiang, Electrochemical Behavior of LiFePO4/C Cathode Material for Rechargeable Lithium Batteries, J. Electrochem. Soc., 152, A1969-A1973(2005). [74] K.-F. Hsu, S.-Y. Tsay, and B.-J. Hwang, Physical and Electrochemical Properties of LiFePO4/Carbon Composite Synthesized at Various Pyrolysis Periods, J. Power Sources, 146, 529-533(2005). [75] D. Zane, M. Carewska, S. Scaccia, F. Cardellini, and P. P. Prosini, Factor Affecting Rate Performance of Undoped LiFePO4, Electrochim. Acta, 49, 4259-4271(2004). [76] G. X. Wang, L. Yang, S. L. Bewlay, Y. Chen, H. K. Liu, and J. H. Ahn, Electrochemical Properties of Carbon Coated LiFePO4 Cathode Materials, J. Power Sources, 146, 521-524(2005). [77] C. Delacourt, C. Wurm, L. Laffont, J.-B. Leriche, and C. Masquelier, Electrochemical and Electrical Properties of Nb- and/or C-Containing LiFePO4 Composites, Solid State Ionics, 177, 333-341(2006). [78] G. X. Wang, S. Bewlay, J. Yao, J. H. Ahn, S. X. Dou, and H. K. Liu, Characterization of LiMxFe1-xPO4( M=Mg, Zr, Ti) Cathode Materials Prepared by the Sol-Gel Method, Electrochem. Solid-State Lett., 7, A503-A506(2004). [79] D. Wang, H. Li, S. Shi, X. Huang, and L. Chen, Improving the Rate Performance of LiFePO4 by Fe-site Doping, Electrochim. Acta, 50, 2955-2958(2005). [80] K. S. Park, J. T. Son, H. T. Chung, S. J. Kim, C. H. Lee, K. T. Kang, and H. G. Kim, Surface Modification by Silver Coating for Improving Electrochemical Properties of LiFePO4, Solid-State Commun., 129, 311-314(2004). [81] A. Yamada, M. Hosoya, S.-C Chung, Y. Kudo, K. Hinokuma, K.-Y. Liu, and Y. Nishi, Olivine-Type Cathodes: Achievements and Problems,J. Power Sources, 119-121, 232-238(2003). [82] R. Dominko, M. Gaberscek, J. Drofenik, M. Bele, S. Pejovnik, and J. Jamnik, The Role of Carbon Black Distribution in Cathodes for Li-Ion Batteries, J. Power Sources, 119-121, 770-773(2003). [83] R. Dominko, M. Bele, M. Gaberscek, M. Remskar, D. Hanzel, S. Pejovnik, and J. Jamnik, Impact of the Carbon Coating Thickness on the Electrochemical Performance of LiFePO4/C Compostites, J. Electrochem. Soc., 152, A607-A610(2005). [84] R. Dominko, J. M. Goupil, M. Bele, M. Gaberscek, M. Remskar, D. Hanzel, and J. Jamnik, Impact of LiFePO4/C Composites Porosity on Their Electrochemical Performance, J. Electrochem. Soc., 152, A858-A863(2005). [85] P. Subramanya Herle, B. Ellis, N. Coombs, and L. F. Nazar, Nano-Network Electronic Conduction in Iron and Nickel Olivine Phosphates, Nat. Mater., 3, 147-152(2004). [86] M. Herstedt, M. Stjerndahl, A. Nytén, T. Gustafsson, H. Rensmo, H. Siegbahn, N. Ravet, M. Armand, J. O. Thomas, and K. Edström, Surface Chemistry of Carbon-Treated LiFePO4 Particles for Li-Ion Battery Cathodes Studied by PES, Electrochem. Solid-State Lett., 6, A202-A206(2003). [87] A. S. Andersson and J. O. Thomas, The Source of First-Cycle Capacity Loss in LiFePO4, J. Power Sources, 97-98, 498-502(2001). [88] V. Srinivasan and J. Newman, Discharge Model for the Lithium Iron-Phosphate Electrode, J. Electrochem. Soc., 151, A1517-A1529(2004). [89] C. Delacourt, P. Poizot, J.-M. Tarascon, and C. Masquelier, The Existence of a Temperature-Driven Solid Solution in LixFePO4 of 0≦x≦1, Nat. Mater., 4, 254-260(2005). [90] A. Yamada, H. Koizumi, N. Sonoyama, and R. Kanno, Phase Change in LixFePO4, Electrochem. Solid-State Lett., 8, A409-A413(2005). [91] M. S. Whittingham, Y. Song, S. Lutta, P. Y. Zavalij and N. A. Chernova, Some Transition Metal (oxy)Phosphate and Vanadium Oxides for Lithium Batteries, J. Mater. Chem., 15, 3362-3379(2005). [92] G. Chen, X. Song, and T. J. Richardson, Electron Microscopy Study of the LiFePO4 to FePO4 Phase Transition, Electrochem. Solid-State Lett., 9, A295-A298(2006). [93] D. Wang, X. Wu, Z. Wang, and L. Chen, Cracking Causing Cyclic Instability of LiFePO4 Cathode Material, J. Power Sources, 140, 125-128(2005). [94] K. Amine, J. Liu, and I. Belharouak, High-Temperature Storage and Cycling of C-LiFePO4/Graphite Li-Ion Cells, Electrochem. Commun., 7, 669-573(2005). [95] C.-Y. Su and H.-C. Wu, The Electrochemical Performance and Fading Mechanism Analysis of Commercial LiMn2O4 and LiFePO4, Annual Meeting of Chinese Society of Material Science, 2005. [96]http://physics.pdx.edu/~pmoeck/phy381/Topic5a-XRD.pdf [97]http://mse.iastate.edu/microscopy/home.html [98]http://www.cartage.org.lb/en/themes/Sciences/Chemistry/Electrochemis/Electrochemical/CyclicVoltammetry/CyclicVoltammetry.htm [99] Material Safety Data Sheet of Lithium Carbonate, Sigma-Aldrich (2004). [100] K. E. Aifantis and J.P. Dempsey, Stable Crack Growth in Nanostructured Li-batteries, J. Power Sources, 143, 203-211(2005). [101] H. Günzler and A. Williams (ed.), Handbook of Analytical Techniques, vol. I, WILEY-VCH, 2001. [102] A.J. Bard and L.R Faulkner, Electrochemical Methods: Fundamentals and Applications, 2nd ed., John Wiley & Sons, Inc., 2001. [103] S.M Park and J.S Yoo, Analyticl Chemistry, vol.75, 455A, 2003. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31470 | - |
dc.description.abstract | 由於鋰鐵磷酸鹽之低成本、低毒性、高工作電位、高理論電容量、以及其組成元素在地球上豐富的藏量,使得它成為一極具潛力之鋰離子電池正極材料。在本研究中,我們使用一能夠讓反應氣氛流經源材料粉體床之實驗配置來合成碳批覆鋰鐵磷酸鹽,利用這個裝置可在兩小時中合成出具良好電化學特性之鋰鐵磷酸鹽。從調整鋰鐵計量比的實驗結果,可以找到一個最適的計量比範圍,其中當鋰鐵比例為1.17時,其產物可以放出140 mAh/g的電容量。將前述的製程稍作改良之後,在最佳化的熱處理條件之下可以得到148 mAh/g的電容量,且在高溫循環壽命測試下有很好的表現(平均每圈0.026%的衰減),改良過的製程較原本製程更有利於大量生產。之後,不同碳含量的樣品也比較了它們之間高溫循環的能力,結果顯示碳量高的樣品表現出較佳的循環壽命(在循環100圈之後相差了30%的電容量衰退)。最後,以溶膠-凝膠法在少量碳批覆之鋰鐵磷酸鹽表面鍍上一層二氧化鈦,此二氧化鈦鍍層成功地增進了在55oC高速充放電下的半電池壽命。 | zh_TW |
dc.description.abstract | Lithium iron phosphate (LiFePO4) is a potential cathode material for lithium ion batteries owing to its low cost, low toxicity, abundance on earth, high operating voltage, and high theoretical capacity. In this research, carbon coated LiFePO4 (C-LFP) was synthesized by an experimental setup of flow-through configuration within 2 h. An optimum Li/Fe ratio of 1.17 was found (capacity of 140 mAh/g), and it revealed that the electrochemical performance would greatly be influenced by different stoichiometries. A modified synthetic route was developed. At the optimized heating condition, capacity of 148 mAh/g and good cycle life (0.026% fading per cycle) were obtained. Then, the high temperature (55oC) cycling performances of C-LFP under high rate were compared between different carbon contents. The more carbon one exhibited much better performance than the less carbon one did (30% fading in difference after 100 cycles). Finally, the sol-gel coating TiO2 on C-LFP with less carbon was made to improve the cycle performance of the half cell at 55oC. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T03:13:26Z (GMT). No. of bitstreams: 1 ntu-95-R93524003-1.pdf: 11003820 bytes, checksum: 991fb00fe4b5abcaef9f8084beaf438b (MD5) Previous issue date: 2006 | en |
dc.description.tableofcontents | 摘要 I
Abstract II Table of Contents III List of Tables V List of Figures VI Chap. 1 Introduction and Research Background 1 Chap. 2 Theory and Literature Review 3 2-1 Introduction to Batteries 3 2-2 Introduction to Lithium Ion Secondary Batteries 7 2-3 Electrode Materials Using in Lithium Ion Batteries 11 2-3.1 Anode Materials 11 2-3.2 Cathode Materials 15 2-4 LiFePO4 Cathode Material for Lithium Ion Batteries 23 Chap. 3 Experimental 39 3-1 Chemicals 39 3-2 Synthesis of Lithium Iron Phosphates 41 3-2.1 Synthesis of Carbon-Coated Lithium Iron Phosphate 41 3-2.2 Synthesis of Titanium-Added Carbon-Coated Lithium Iron Phosphate 42 3-2.3 Synthesis of Sol-Gel Coating TiO2 on Carbon Coated Lithium Iron Phosphate 42 3-2.4 The Ball-Milling Process 43 3-2.5 The Cell-Fabricating Process 44 3-3 Characterizations 52 3-3.1 Phase Determination 52 3-3.2 Morphology Observation 52 3-3.3 Determination of Carbon Content 53 3-3.4 The Electrochemical Characterizations 54 3-3.5 Charge-Discharge Test 55 3-3.6 Raman Spectroscopy 56 3.3.7 Electrochemical Impedance Spectroscopy 56 Chap. 4 Results and Discussions 61 4-1 Electrochemical Performance of Different Stoichiometries of Carbon Coated Lithium Iron Phosphates under Modest Rate 61 4-2 Fluidized Bed Process- the Modification of Pellet Method 74 4-3 The Effect of Carbon Content on High Temperature (55oC) Cycling Performance 86 4-4 Modification of Carbon Coated Lithium Iron Phosphate by Sol-Gel Coating Titanium Oxide 101 4.5 The Electrochemical Impedance Spectroscopy Study of Carbon- Coated LiFePO4 113 Chap. 5 Conclusions 121 References 123 | |
dc.language.iso | en | |
dc.title | 鋰離子電池碳批覆鋰鐵磷酸鹽正極材料之製備與特性分析 | zh_TW |
dc.title | Preparations and Characterizations of Carbon Coated LiFePO4 Cathode Materials for Lithium-Ion Batteries | en |
dc.type | Thesis | |
dc.date.schoolyear | 94-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 楊模樺(Mo-Hua Yang),吳弘俊(Hung-Chun Wu) | |
dc.subject.keyword | 鋰離子電池,正極材料,鋰鐵磷酸鹽, | zh_TW |
dc.subject.keyword | Li-Ion batteries,cathode materials,LiFePO4, | en |
dc.relation.page | 133 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2006-08-17 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 10.75 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。