請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31078
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 邱文英 | |
dc.contributor.author | Yi-Jun Lin | en |
dc.contributor.author | 林怡君 | zh_TW |
dc.date.accessioned | 2021-06-13T02:28:39Z | - |
dc.date.available | 2009-02-02 | |
dc.date.copyright | 2007-02-02 | |
dc.date.issued | 2007 | |
dc.date.submitted | 2007-01-26 | |
dc.identifier.citation | Chapter 1
1. C. Sanchez, J. Livage, New J. Chem. 1990, 14, 513. 2. C.J. Wang, Y.R. Zhu, and Z.Y. Chen, Mater. Sci. and Eng., 77 (2000) 135. 3. B. L. Cushing, V. L. Kolesnichenko, C. J. Connor ,Chem. Rev. 2004, 104, 3893 4. J. Livage, M. Henry, C. Sanchez, Prog. Solid St. Chem. 1988, 18, 259 5. E. Matijevic, Chem. Mater. 1993, 5, 412 6. Léaustic, F. Bahonneau, J. Livage, Chem. Mater. 1989, 1, 248. 7. D. M. Puri, R. C. Mehrotra, Indian J. Chem. 1967, 51, 448. 8. S. Chen, Ind. Eng. Chem. Res. 35 (1996) 4487. 9. C. J. Brinker, Y. F. Lu, A. Sellinger, H. Y. Fan, Adv. Mater. 1999, 11, 579 10. C. T. Kresge, M. E. Leonowicz, W. J. Roth, J. C. Vartuli, J. S. Beck, 1992, 359, 710 11. P. D. Yang, D. Y. Zhao, D. I. Margolese, B. F. Chmelka, G. D. Stucky, Nature 1998, 396, 152 12. J. Ba, J. Polleux, M. Antonietti, M. Niederberger, Adv. Mater. 2005, 17, 2509 13. G. J. D. A. A. Soler-illia, C. Sanchez, B. Lebeau, J. Patarin, Chem. Rev. 2002, 102, 4093 14. C. G. G. Niner, M. Antonietti, Adv. Mater. 1997, 9, 431 15. C. G. G. Niner, M. Antonietti, Adv. Mater. 1998, 10, 195 16. R. A. Caruso, M. Antonietti, Chem. Mater. 2001, 13, 3272 17. R. A. Caruso, Top. Curr,. Chem. 2003, 226, 91 18. Y. Lu, R. Ganguli, C. A. Drewien, M. T. Anderson, C. J. Brinker, W. Gong, Y. Guo, H. Soyez, B. Dunn, M. H. Huang, J. I. Zink, Nature 1997, 389, 364. 19. D. Zhao, P. Yang, N. Melosh, J. Feng, B. F. Chmelka, G. D. Stucky, Adv. Mater. 1998, 10, 1380. 20. G. J. A. A. Soler-Illia, C. Sanchez, B. Lebeau, J. Patarin, Chem. Rev. 2002, 102, 4093. 21. P. Yang, D. Zhao, D. I. Margolese, B. F. Chmelka, G. D. Stucky, Nature 1998, 396, 152. 22. D. Grosso, G. Soler-Illia, F. Babonneau, C. Sanchez, P. A. Albouy, A. Brunet-Bruneau, A. R. Balkenende, Adv. Mater. 2001, 13, 1085. 23. Y. K. Hwang, K. C. Lee, Y. U. Kwon, Chem. Commun. 2001, 1738. 24. Y. Yue, Z. Gao, Chem. Commun. 2000, 1755. 25. H. S. Yun, K. Miyazawa, H. S. Zhou, I. Honma, M. Kuwabara, Adv. Mater. 2001, 13, 1377. 26. Y. Sakamoto, M. Kaneda, O. Terasaki, D. Y. Zhao, J. M. Kim, G. D. Stucky, H. J. Shin, R. Ryoo, Nature 2000, 408, 449. 27. P. Alberius-Henning, K. L. Frindell, R. C. Hayward, E. J. Kramer, G. D. Stucky, B. F. Chmelka, Chem. Mater. 2002, 14, 3284. 28. IUPAC, pure and Applied Chemistry 192, 31, 578 29. M. Kruk, M. Jaroniec, Chem. Mater. 2001, 13, 3169 30. K. I. Hadjiivanov, D. G. Klissurski, Chem. Soc. Rev. 25, 61 (1996). 31. A. L. Linsebigler, G. Lu, and J. T. Yates, Chem. Rev. 95, 735 (1995). 32. B.O,Regan, M. Gratzel, Nature 353, 737 (1991). 33. Park, N. G.; Lagemaat, J.; Frank, A. J. J. Phys. Chem. B 2000, 104, 8989. 34. Stone, V. F.; Davis, R. J. Chem. Mater. 1998, 10, 1468. 35. P. Hoyer, Langmuir 12, 1411 (1996). 36. J. Hwa Jung, H. Kobayashi, K. J. C. Van Bommel, A. Shinkai, and T. Shimizu, Chem. Mater. 14, 1445 (2002). 37. R. A. Caruso, J. H. Schattka, and A. Greiner, Adv. Mater. 13, 1577 (2001) 38. X. P. GaO, H. Y. Zhu, G. L. Pan, S. H. Ye, Y. Lan, F. Wu, and D. Y. Song, J. Phys. Chem. 108, 2868 (2004). 39. Z. R. R. Tian, J. A. Voigt, J. Liu, B. Mckenzie and H. F. Xu, J. Am. Chem. Soc. 125, 12384 (2003). 40. Du, G. H.; Chen, Q.; Che, R. C.; Yuan, Z. Y.; Peng, L. M. Appl. Phys. Lett. 2001, 79, 3702. PartII References 1. D. C. Jiles, Acta Materialia 51, 5907 (2003). 2. P. Poddar et al., Nanotechnology 15, 570 (2004). 3. S. Chikazumi et al., Journal of Magnetism and Magnetic Materials 65, 245 (1987). 4. Y. D. Zhang et al., et al., Journal of Applied Physics 95, 7130 (2004). 5. B. D. Cullity, Introduction to Magnetic Materials (1972). 6. C. C. Berry, A. S. G. Curtis, Journal of Physics D: Applied Physics 36, 198 (2003). 7. E. Callen, Physical Review 150, 367 (1966). 8. A. H. Morrish, S. P. Yu, Physical Review 102, 670 (1956). 9. S. Odenbach, Journal of Physics-Condensed Matter 16, R1135 (2004). 10. M. Zahn, Journal of Nanoparticle Research 3, 73 (2001). 11. R. E. Rosensweig, Science 271, 614 (1996). 12. B. Berkovski, V. Bashtovoy, Magnetic fluids and applications handbook (1996). 13. W. C. Elmore, Phys. Rev. 54, 309 (1987). 14. A. S. Lubbe, C. Alexiou, C. Bergemann, J. Surgical Research 95, 200 (2001). 15. C. Stamm, F. Marty, A. Vaterlaus, V. Weich, S. Egger, U. Maier, U. Ramsperger, H. Fuhrmann, and D. Pescia, Science 282, 449 (1998). 16. L. A. Welo, O. Baudisch, Philosophical Magazine 50, 399 (1925). 17. L. E. Slaten, Journal of Applied Physics 31, 74S (1960). 18. R. Kaiser, G. Miskolczy, Journal of Applied Physics 41, 1064 (1970). 19. J. M. D. Coey, Physics Review Letters 27, 1140 (1971). 20. J. P. Chen, C. M. Sorensen, K. J. Klabunde, G. C. Hadjipanayis, E. Devlin, and A. Kostikas, Physical Review B 54, 9288 (1996). 21. M. Ozaki, T. Sugimoto, Ed. New York: Marcel Dekker, Inc., 2000, pp. 662-682. 22. Z. X. Tang, C. M. Sorensen, K. J. Klabunde, and G. C. Hadjipanayis, Journal of Colloid and Interface Science 146, 38 (1991). 23. Z. J. Zhang, Z. L. Wang, B. C. Chakoumakos, and J. S. Yin, Journal of the American Chemical Society 120, 1800 (1998). 24. S. Neveu, A. Bee, M. Robineau, and D. Talbot, Journal of Colloid and Interface Science 255, 293 (2002). 25. Z. L. Liu, Y. J. Liu, K. L. Yao, Y. H. Ding, J. Tao, and X. Wang, Journal of Materials Synthesis and Processing 10, 83 (2002). 26. D. K. Kim, M. Mikhaylova, Y. Zhang, and M. Muhammed, Chemistry of Materials 15, 1617 (2003). 27. M. C. K. Wiltshire, J. B. Pendry, I. R. Young, D. J. Larkman, D. J. Gilderdale, J. B. Hajnal, Science 291, 849 (2001). 28. D. E. Speliotis, J. Magn. Magn. Mater. 193, 29 (1999). 29. M. Kryszewski, J. K. Jeszka, Synth. Met. 94, 99 (1998). 30. Y. S. Kang, S. Risbud, J. F. Rabolt, P. Stroeve, Chem. Mater. 8, 2209 (1996). 31. C. Y. Hong, I. J. Jang, H. E. Horng, C. J. Hsu, Y. D. Yong, H. C. Yang, J. Appl. Phys. 81, 4275 (1997). 32. Z. J. Zhang, Z. L. Wang, B. C. Chakoumakos, J. S. Yin, J. Am. Chem. Soc. 120, 1800 (1998). 33. M. P. Pileni, N. J. Moumen, Phys. Chem. B 100, 1867 (1996). 34. C. Liu, B. Zou, A. J. Rondinone, Z. J. Zhang, J. Phys. Chem. B 104, 1141 (2000). 35. F. X. Redl, K.-S. Cho, C. B. Murray, S. O’Brien, Nature 423, 968 (2003). 36. J. Park, K. J. An, Y. S. Hwang, J. G.. Park, H. J. Noh, J. Y. Kim, J. H. Park, N. M. Hwang, T. Hyeon, Nature materials 3, 891 (2004). 37. S. Iijima, Nature 354, 56 (1991). 38. Y. Y. Wu, M. Benjamin, P. D. Yang, Adv. Mater. 13, 1487 (2001). 39. D. J. Hornbaker, S.-J. Kahng, S. Misra, B. J. Smith, A. T. Johnson, E. J. Mele, D. E. Luzzi, A. Yazdani, Science 295, 828 (2002). 40. X. L. Chen, J. Y. Li, Y. G. Cao, Y. C. Lan, C. Y. Wang, Z. Zhang, Z. Y. Qiao, Adv. Mater. 12, 1432 (2000). 41. D. H. Justin, P. J. Keith, R. C. Doty, B. A. Korgel, Science 287, 1471 (2000). 42. G. S. Cheng, L. D. Zhang, Y. Zhu, G. T. Fei, L. Li, C. M. Mo, Appl. Phys. Lett. 75, 2455 (1999). 43. Y. G. Sun, Y. N. Xia, Adv. Mater. 14, 833 (2000). 44. J. L. Li, X. J. Liang, J. F. Jia, X. Liu, J. Z. Wang, E. G. Wang, Q. K. Xue, Appl. Phys. Lett. 79, 2826 (2001). 45. N. Wang, Y. H. Tang, Y. F. Zhang, C. S. Lee, S. T. Lee, Phys. Rev. B. 58, R16024 (1998). 46. C. H. Liang, L. C. Chen, J. S. Huang, K. H. Chen, Y. T. Huang, Y. F. Chen, Appl. Phys. Lett. 81, 22 (2002). 47. J. K. Jian, X. L. Chen, W. J. Wang, L. Dai, Y. P. Xu, Appl. Phys. A 75, 695 (2002). 48. J. Y. Li, X. L. Chen, Z. Y. Qiao, M. He, H. Li, J Phys.: Condens. Matter. 13, L937 (2001). 49. R. Skomski, J. Phys.: Condens. Matter. 15, R841 (2003). 50. S. H. Sun, C. B. Murray, D. Weller, L. Folks, A. Moser, Science 287, 1989 (2000). 51. D. Beydoun, R. Amal, S. McEvoy, J. Phys. Chem. B 104, 4387 (2000). 52. J. M. Perez, T. O’Loughin, F. J. Simeone, R. Weissleder, L. Josephson, J. Am. Chem. Soc. 124, 2856 (2002). 53. M. Zhao, L. Josephson, Y. Tang, R. Weissleder, Angew. Chem. Int. Ed. 42, 1375 (2003). 54. Y. J. Lin, L. Wang, J. G. Lin, Y. Y. Huang, W. Y. Chiu, Synth. Met. 135, 769 (2003). 55. T. Fried, G.. Shemer, G. Markovich, Adv. Mater. 13, 1158 (2001). 56. W. W. Yu, J. C. Falkner, C. J. Yavuz, V. L. Colvin, Chem. Commun. 2306 (2004). 57. Y. B. Khollam, S. B. Dhage, H. S. Potdar, S. B. Deshpande, P. P. Bakare, S. D. Kulkarni, S. K. Date, Materials Letters 56, 571 (2002). 58. S. Y. Lian, Z. H. Kang, E. B. Wang, M. Jiang, C. W. Hu, L. Xu, Solid State Commun. 127, 605 (2003). 59. N. R. Jana, Y. Chen, X. Peng, Chem. Mater. 16, 3931 (2004). 60. J. Wang, Q. Chen, C. Zeng, B. Hou, Adv. Mater. 16, 137 (2004). Chapter 2 References 1. J. Bard and L. R. Faulkner, Electrochemical Methods: Fundamentals and Applications (2nd Ed.) (Wiley, New York, 2001). 2. D. T. Sawyer, W. R. Heineman and J. M. Beebe, Chemistry Experiments for Instrumental Methods (Wiley, New York, 1984) p.77. 3. J. L. Brédas, R. Silbey, D. S. Boudreux and R. R. Chance, J. Am. Chem. Soc. 105, 6555 (1983). 4. R. Cervini, X. –C. Li, G. W. C. Spencer, A. B. Holmes, S. C. Moratti and R. H. Friend, Synth. Met. 84, 359 (1997). 5. E. M. Genies, G. Bidan and A. Diaz, J. Electrochem. Soc. 149, 101 (1983). 6. G. Tourillon and F. Garnier, J. Electroanal. Chem. 135, 173 (1982). 7. R. J. Waltman, A. F. Diaz and J. Bargon, J. Electrochem. Soc. 131, 1452 (1994). 8. M. Dietrich and J. Heinze, J. Electroanal. Chem. 369, 87 (1994). 9. Q. Pei, G. Zuccarello, M. Ahluskog and O. Inganäs, Polymer 35, 1347 (1994). 10. G. Zotti, M. C. gallazzi, G. Zerbi, S. V. Meille, Synth. Met. 73, 217 (1995). 11. F.Li and W. J. Albery, Electrochimica Acta 37, 393 (1992). 12. H. Randriamahazaka, V. Nöel, C. Chevrot, J. Electroanal. Chem. 103-111, 472 (1999). 13. R. Schrebler, P. Grez, P. Cury, C. Veas, M. Merino, H. Gomez, R. Cordora, M. Der valle, J. Electroanal. Chem. 430, 77 (1997). 14. Handbook of Conducting Polymers, 1st ed. ed. T. A. Skotheim, MARCEL DEKKER, New York 1986. 15. S. Z. Xing, M. Fahlman, X. W. Chen, O. Inganäs, W. R. Salaneck, Synth. Met. 89, 161 (1999). 16. R. J. Waltman, A. F. Diaz and J. Bargon, J. Electrochem. Soc. 131, 1452 (1994). 17. J. Tarabek, M. Wolter, P. Rapta, W. Plieth, M. Maumy, L. Dunsch, Macromol. Symp.169, 219 (2001). 18. A. R. Hillman and E. F. Mallen, J. Electroanal. Chem. 220, 351 (1987). 19. R. J. Waltman, J. Bargon, and A. F. Diaz, J. Phys. Chem. 87, 1459 (1983). 20. F. Chao, M. Costa, and C. Tian, Synth. Met. 53, 127 (1993). 21. G. R.A. Kumara, A. Konno, K. Shiratsuchi, J. Tsukahara, and K. Tennakone, Chem. Mater. 14, 954 (2002). 22. B. O'Regan, D. T. Schwartz, S. M. Zakeeruddin, and M. Grätzel, Adv. Mater. 12, 1263 (2002). 23. J. Krüger, R. Plass, M. Grätzel, and H. J. Mathieu, Appl. Phys. Lett. 81, 367 (2002). Chapter 3 References 1. C. Kittel, Introduction to Solid State Physics (John Wiley and Sons, Inc, New York, ed. 7, 1996). 2. J. L. Bredas, J. Cornil, A. J. Heeger, Advanced Materials 8, 447 (1996). 3. T. G. Bjorklund, S. H. Lim, C. J. Bardeen, J. Phys. Chem. B 105, 11970 (2001). 4. J. J. M. Halls, J. Cornil, D. A. dosSantos, R. Silbey, D. H. Hwang, A. B. Holmes, J. L. Bredas, R. H. Friend, Phys. Rev. B. 60, 5721 (1999). 5. N. S. Sariciftci, A. J. Heeger, Int. J. Mod. Phys. B 8, 237 (1994). 6. P. Peumans, S. R. Forrest, Appl. Phys. Lett. 80(2), 338 (2002). 7. W. U. Huynh, J. J. Dittmer, A. P. Alivisatos, Science 295, 2425 (2002). 8. H. Ago, M. S. P. Shaffer, D. S. Ginger, A. H. Windle, R. H. Friend, Phys. Rev. B 61(3), 2286 (2000). 9. L. Chen, D. Godovsky, O. Inganäs, J. C. Hummelen, R. A. J. Janssens, M. Svensson, M. R. Andersson, Advanced Materials 12(18), 1367 (2000). 10. C. J. Brabec, A. Cravino, D. Meissner, N. S. Sariciftci, M. T. Rispens, L. Sanchez, J. C. Hummelen, T. Fromherz, Thin Solid Films 403-404, 368 (2002). 11. S. E. Shaheen, R. Radspinner, N. Peyghambarian, G. E. Jabbour, Appl. Phys. Lett. 79(18), 2996 (2001 ). 12. P. Yu, M. Cardona, Fundamentals of Semiconductors (Springer, Berlin, 1996) 13. J. J. M. Halls, J. Cornil, D. A. dosSantos, R. Silbey, D. H. Hwang, A. B. Holmes, J. L. Bredas, R. H. Friend, Phys. Rev. B. 60, 5721 (1999). 14. D. S. Ginger, N. C. Greenham, Phys. Rev. B 59, 10622 (1999). 15. R. N. Marks, J. J. M. Halls, D. D. C. Bradley, R. H. Friends, A. B. Holmes, J. Phys. Condens. Matter. 6, 1379 (1994). 16. L. S. Roman, L. Mammo, A. A. Pettersson, M. R. Andersson, O. Inganas, Advanced Materials 10, 774 (1998). 17. H. C. F. Martens, J. N. Huiberts, P. W. Blom, Appl. Phys. Lett. 77, 1852 (2000). 18. M. A. Green, K. Emery, D. L. King, S. lgari, W. Warta, Prog Photovoltaics 9, 287 (2001). 19. J. Rostalski, D. Meissner, Sol. Energy Mater. Sol. Cells 61, 87 (2000). 20. H. K. Pulker, G. Paesold, E. Ritter, Appl. Opt. 15, 2986 (1976). 21. R. van de krol, A. Goossens, J. Schoonman, J. Electrochem. Soc. 144, 1723 (1977). 22. M. Thelakkat, C. Schmitz, H.-W. Schmidt, Adv. Mater. 14, 577 (2002). 23. M. Okuya, K. Nakade, S. Kanebo, Solar Energy Mater. Solar Cells 70, 425 (2002). 24. L. Kavan, M. Grätzel, Electrochim. Acta 40, 643 (1995). 25. J. Krüger, R. Plass, L. Cevey, M. Piccirelli, M. Gratzel, Appl. Phys. Lett. 79, 2085 (2001). 26. C. J. Brabec, N. S. Sariciftci, and J.C. Hummelen, Adv. Funct. Mater. 3, 15 (2000). 27. W. U. Huynh, J. J. Dittmer, and A. P. Alivisatos, Science 295, 2425 (2002). 28. S. E. Shaheen, C. J. Brabec, and N. S. Sariciftci, Appl. Phys. Lett. 78, 841 (2001). 29. J. J. M. Halls, K. Pichler, R. H. Friend, S. C. Moratti, and A. B. Holmes, Appl. Phys. Lett., 68, 3120 (1996). 30. K. E. Ziemelis, A. T. Hussain, D. D. C. Bradley, R. H. Friend, J, Rühe, and G. Wegner, Phys. Rev. Lett. 66, 2231 (1991). 31. P. Dyreklev, O. Inganäs, J. Paloheimo, and H. Stubb, J. Appl. Phys. 71, 2816 (1992). 32. T. J. Savenije, J. M. Warman, and A. Goossens, Chem. Phys. Lett. 287, 148 (1998). 33. F. Garnier and G. Horowitz, Synth. Met. 18, 693 (1986) | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31078 | - |
dc.description.abstract | 本研究主要包括三大部分,包含二氧化鈦、氧化鐵奈米材料之合成與探討;以電化學聚合法製備光敏性聚噻吩/二氧化鈦奈米複合材料以及混成太陽能電池元件之製備。內容共分為三個章節。
第一章最主要在於合成具有不同型態之二氧化鈦及氧化鐵奈米材料。在二氧化鈦方面,首先探討利用溶膠-凝膠反應法合成多孔性二氧化鈦薄膜之性質,並進一步合成具有高穩定性及單一粒徑分佈之二氧化鈦粒子,此部分探討有機溶劑中水含量、前驅物濃度以及溶劑種類對於粒子之型態及粒徑分佈之影響。經由實驗參數之控制,我們可得到高穩定性及單一粒徑分佈之二氧化鈦粒子,且可調控粒徑分佈在50 nm 到252 nm 範圍之間。另外,我們也利用evaporation-induced self-assembly (EISA)方式,藉由溶劑之揮發,造成模版試劑和無機物種之間的自組裝,形成規則性介孔結構,製備具有序連續結構之網狀奈米TiO2 無機薄膜材料。氧化鐵方面,首先以化學共沈法合成Fe3O4粒子,並利用高分子poly(acrylic acid)穩定分散Fe3O4 微粒,形成具有高穩定之磁性流體,進一步探討磁性流體之性質。另外,利用熱裂解法合成大小均一之Fe3O4 磁性粒子,可將Fe3O4 磁性粒子之粒徑控制在5 nm 到15 nm 之間。本章中,我們也利用水熱法處理二氧化鈦以及氧化鐵奈米粒子,以製備奈米管及奈米線。製備所得之二氧化鈦奈II米管表面積大幅增加,其表面積約為原本奈米粒子之六倍 第二章以電化學聚合法製備光敏性聚噻吩/二氧化鈦奈米複合材料,應用電化學聚合法直接將有機導電高分子材料以in-situ 聚合方式與無機半導體材料直接形成active hybrid layer。本章中,我們將深入探討電化學反應參數、混合溶劑中水的比例、電流密度以及酸濃度對於聚噻吩/二氧化鈦奈米複合材料之附著性、表面型態、以及電化學性質之影響。我們可藉由反應參數的調控,得到表面型態均勻、附著性佳且電化學性質穩定之複合材料。 第三章主要以電化學聚合法製備聚噻吩/二氧化鈦太陽能電池。利用噴霧熱解法製備緻密二氧化鈦層,並導入此緻密層以製備元件。本部分詳細探討製備緻密二氧化鈦層時,實驗參數對於二氧化鈦膜之表面型態以及對於元件效率之影響。實驗結果顯示導入此二氧化鈦緻密層後,元件效率有顯著之提升,效率較未導入此緻密層時提高約一千倍,且Fill factor 由0.2 提高到0.51。本章中會更進一步探討緻密層之層數對於元件之光電特性之影響。 | zh_TW |
dc.description.abstract | This thesis divided into three parts. The synthesis of metal oxide materials, including titanium dioxide (TiO2) and iron oxides (Fe3O4) were described in Chapter 1. The experimental procedures and characterization results of successful synthesis of crystalline TiO2, and Fe3O4 with various shapes and morphologies were reported and discussed in this chapter. In the following part of this work, the synthesis and characterization of TiO2 nanocrystals with a rather small particle size distribution were presented. The effects of titanium precursor concentration, solvent, and water content on the morphology and particle size distribution of TiO2 colloids were also briefly discussed. The diameter of these titania spheres can be easily tuned from 50 to 252 nm by varying the precursor concentration from 0.68 mM to 1.94E-2 M. Titania thin film produced by evaporation-induced self-assembly (EISA) route were also studied, which has a highly ordered mesostructure, narrow pore-size distribution, relatively high specific surface area, and very good thermal stability. Moreover, the structure was stable up to 400℃ and contains channel walls with anatase nanocrystallites. Importantly, under modified film aging conditions, optically transparent and crack-free thin films were obtained by the deposition onto a compact TiO2 layer. A part of this chapter presented the methods used to synthesize and characterize the magnetite materials. In the chapter, a series of magnetic materials with different shapes and morphologies were proposed and studied.
In organic/inorganic hybrid photovoltaic cells, the inherent incompatibility of inorganic particle and conjugated polymer frequently causes microscopic separation in the interface of two materials, thus significantly reducing its interfacial photo-induced charge transfer efficiency. In Chapter 2, a series of photoactive hybrids were prepared by the electrochemical polymerization of bithiophene into a nanoporous TiO2-coated ITO glass using chronopotential method in pure acetonitrile solution, or in a water/acetonitrile mixed solvent at different current densities. The growth conditions for the preparation of well defined smooth and adhesive polybithiophene films were demonstrated. Furthermore, the morphologies and electrochemical properties of the as-prepared polybithiophene/TiO2 photoactive hybrid materials were described in this chapter. In Chapter 3, it describes the details of the preparation of organic solar cells by in-situ electropolymerization method. In photovoltaic cells, the use of an additional blocking TiO2 layer was essential to avoid short circuiting and loss of current through recombination at the FTO electrode. A method of preparation of a compact TiO2 layer by spray pyrolysis technique, and its standardization for the solar cell fabrication was discussed. The nature, structure and morphology of this layer with increasing thickness was examined with scanning electron microscopy (SEM), and the effects of this compact layer on the photovoltaic properties of the corresponding solar cells were also studied by looking into the current(I)-voltage(V) characteristics of a solar cell. Influences of the spraying cycles of this compact layer were also investigated in this chapter. The results indicated that an optimum spraying cycles of compact TiO2 layer was found to be the key issue to give the best results in terms of photovoltaic properties, and the layers of blocking TiO2 film should lie in the optimized region. In our experimental, this corresponds to below 10 spraying cycles in terms of surface morphology and photovoltaic properties. The results of this thesis demonstrate that this study provides a facile and successful route for growing conducting polymer from the porous TiO2 film. The cell power conversion efficiency could be further improved by optimizing the in-situ polymerization conditions, polymer structures, film morphologies, and contacts of metal/polymer/inorganic interfaces. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T02:28:39Z (GMT). No. of bitstreams: 1 ntu-96-D90524012-1.pdf: 6387395 bytes, checksum: 1f70d5c527814d6992921cbb6f8b589b (MD5) Previous issue date: 2007 | en |
dc.description.tableofcontents | 摘要…………………………………………I
Abstract………………………………………………… III Table of Contents…………………………………………………V List of Figures…………………………………………IX List of Tables……………………………………………XVI Chapter 1 Synthesis and characterization of nanostructured inorganic materials-TiO2, and Fe3O4………………………………………………………………1 Part I: Nanostructured TiO2 1-1 Nanoporous TiO2 film……………………1 1-1-1 Sol-gel process……………………………………1 1-1-2 Experimental…………………………………3 1-1-3 Results and discussion…………………………………………5 1-2 Monodispersed TiO2 particles…………………………………6 1-2-1 Experimental…………………………………7 1-2-1-1 Synthesis of TiO2 colloids………………………………7 1-2-1-2 Characterization………………………………………7 1-2-2 Results and discussion………………………………8 1-2-2-1 Influence of water content……………8 1-2-2-2 Influence of solvents…………………………………9 1-2-2-3 Influence of precursor concentrations………………10 1-3 Ordered mesoporous titania thin films fabricated by evaporation-induced self assembly (EISA) method……………………………………………14 1-3-1 Evaporation-induced self assembly method…………14 1-3-2 Experimental…………………………………………………….17 1-3-2-1 Materials……………………………………………17 1-3-2-2 Preparation of reactant solution……………………….17 1-3-2-3 Preparation of samples…………………………17 1-3-2-4 Characterization……………………17 1-3-3 Results and discussion…………………………18 1-3-3-1 Morphology studies of the ordered mesoporous TiO2 thin film…18 1-3-3-2 Characterization of porosity and surface area……………20 1-4 TiO2 nanotubes prepared by hydrothermal treatment method………23 1-4-1 Experimental…………………………………………24 1-4-2 Results and discussion…………………………………………25 References……………………………………………31 Part Ⅱ: Nanostructured Fe3O4 1-5 Magnetic materials…………………………………34 1-5-1 Background of magnetite and superparamagnetism……34 1-5-2 Synthesis of Fe3O4 nanoparticles by chemical coprecipitation……41 1-5-2-1 Experimental……………………42 1-5-2-2 Results and discussion……………………42 1-5-3 Synthesis of monodispersed Fe3O4 nanoparticles…………46 1-5-3-1 Experimental……………………………47 1-5-3-2 Characterization of monodispersed iron oxide nanoparticles……48 1-5-4 Synthesis of Fe3O4 nanowire……………………51 1-5-4-1 Experimental……………………………52 1-5-4-2 Results and discussion………………………………………53 References…………………………………55 Chapter 2 Synthesis and morphology studies of the electopolymerized polybithiophene/titania composite……………………………………59 2-1 Introduction of electrochemical method………………………………60 2-1-1 Electrochemical process and system………………60 2-1-2 Determination of the energy levels of organic semiconductors……66 2-1-3 Electrochemical synthesis of polymers………………66 2-2 Electropolymerization of thiophene derivatives onto nanoporous titania films by chronoamperometry method……………………………………68 2-2-1 Experimental…………………………………69 2-2-1-1 Growth conditions for the electropolymerization of bithiophene…69 2-2-2 Morphology studies of polybithiophene films……………………74 2-2-2-1 Effect of total charge amount………………………74 2-2-2-2 Effect of growth parameters………………………83 2-2-3 Electrical properties of polybithiophene films…………………85 2-3 Electropolymerization of 3-MeT onto nanoporous titania films…………………87 2-4 Electropolymerization of bithiophene onto nanoporous titania films by chronopotentiometry method…………………………………91 2-4-1 Experimental………………………………………………….91 2-4-2 Morphology studies of polybithiophene films…………………91 2-4-2-1 Effect of the water content ………………………….91 2-4-2-2 Effect of the current density……………………………97 2-4-2-3 Effect of perchloric acid concentration ……………………100 2-4-3 Electrical properties of polybithiophene films………………………104 Conclusion…………………………………………………105 References……………………………………………………106 Chapter 3 Polybithiophene/TiO2 composite solar cells fabricated by electrochemical polymerization method…………………………………………………108 3-1 Introduction of organic solar cells…………………………………108 3-1-1 The demand for solar cells………………108 3-1-2 Polymer-based solar cells…………………………110 3-1-3 Processes of solar energy conversion……………………112 3-1-4 Photovoltaic cell performance…………………………113 3-2 Spray pyrolysis deposition of compact TiO2 layer…………………116 3-2-1 Experimental……………………………117 3-2-1-1Materials……………………………117 3-2-1-2 Instrumentation…………………………………………….117 3-2-1-3 Synthesis of Di-isopropoxy titanium bis(acetylacetone)……117 3-2-1-4 Preparation of the compact TiO2 films…………………….118 3-2-2 Results and discussion……………………………………119 3-3 Fabrication of polybithiophene/TiO2 composite solar cells……127 3-3-1 Experimental………………127 3-3-1-1Etching of fluorine-doped tin oxide (FTO) substrate…128 3-3-1-2 Spraying pyrolysis deposition of TiO2……………129 3-3-1-3 Preparation and sintering of nanoporous TiO2 film……129 3-3-1-4 Electropolymerization of bithiophene into titania films……130 3-3-1-5 Fabrication of photovoltaic cells…………130 3-3-2 Results and discussion……………………………………131 Conclusion……………………………………………………………………134 References……………………………………………………………………135 | |
dc.language.iso | en | |
dc.title | 具奈米結構之二氧化鈦/共軛高分子與氧化鐵/聚丙烯酸複合材料之合成、性質與應用 | zh_TW |
dc.title | Nanostructured TiO2/Conjugated Polymer and Fe3O4/PAA Composites: Synthesis, Properties and Photovoltaic Application. | en |
dc.type | Thesis | |
dc.date.schoolyear | 95-1 | |
dc.description.degree | 博士 | |
dc.contributor.coadvisor | 王立義 | |
dc.contributor.oralexamcommittee | 戴子安,廖文彬,胡孝光,謝國煌,郭昌恕 | |
dc.subject.keyword | 二氧化鈦/共軛高分子複合材料,電化學聚合,氧化鐵/聚丙烯酸複合材料,有機太陽能電池, | zh_TW |
dc.subject.keyword | TiO2/Conjugated polymer composites,electrochemical polymerization,Fe3O4/PAA composites,photovoltaic application, | en |
dc.relation.page | 137 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2007-01-26 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 化學工程學研究所 | zh_TW |
顯示於系所單位: | 化學工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-96-1.pdf 目前未授權公開取用 | 6.24 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。