請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31062
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 詹穎雯 | |
dc.contributor.author | Rei-Xiuan Lai | en |
dc.contributor.author | 賴睿璿 | zh_TW |
dc.date.accessioned | 2021-06-13T02:27:50Z | - |
dc.date.available | 2011-08-09 | |
dc.date.copyright | 2011-08-09 | |
dc.date.issued | 2011 | |
dc.date.submitted | 2011-08-01 | |
dc.identifier.citation | 【1】 Henry, G Russell, “ACI Defines High-Performance Concrete,”Concrete International, Vol. 21 , No. 2 ,PP. 56-57, February 1999.
【2】 陳振川,「高性能混凝土整合推動計畫與國外經驗」,結構工程第九卷,第一期,pp. 7-23頁,民國八十三年。 【3】 Okamura,H., “High Performance Concrete” Report Concrete Lab. Dept. of Civil Engineering, University of Tokyo, 1991. 【4】 Larrard,F.D, “A Survey of Recent Researches in the French ‘LPC’ Network on High Performance Concrete” ,Proc. Of Symposium in Lillehammer, Norway, PP.57-67,1993. 【5】 林維明,「高性能混凝土研究計畫概說」,營建知訊,第119期,pp38-61頁,1992。 【6】 MacGregor , J . G. , “Canadian Network of Centers of Excellence on High-Performance Concrete “ Concrete International , ACI , Vol . 15 , No . 2 , PP. 60-61 , 1993. 【7】 Guirguis. S. Kett, D and RL Munn “High Performance Concrete” Constructional Review , August 1993. 【8】 陳振川,「高性能混凝土發展現況與展望」,高性能混凝土配比設計實作研討會,內政部營建署主辦,1998。 【9】 黃兆龍,「飛灰混凝土發展與應用趨勢」,如何使用飛灰提昇混凝土品質論文集,台灣研究院,pp. 27-64 ,民國八十六年一月。 【10】 Mehta , P.K. , “Pozzolanic and Cementitious by Products as Mineral Admixtures for Concrete-A Critical Review , “ ACI SP-79 , PP. 1-46 , 1983. 【11】 Metha , P. , and P.J.M. Monteiro , “Concrete Structure , Prorerties and Materials , Prentice-Hall inc. , Englewood-Cliffs , N.J. , 1986. 【12】 林平全,「飛灰混凝土」,科技圖書股份有限公司,民國八十二年八月。 【13】 Fournier, B., “The Role of Fly Ash in Controlling AlkaliSilica Reaction in Concrete,” Proceedings, Three-Day CANMETI ACI International Symposium on Sustainable Development of the Cement and Concrete Industry, Ottawa, Canada, PP. 411-422, October 21-23 (1998). 【14】 Sivasundaram, V., and V.M. Malhotra, ”Properties of concrete incorporating low quantity of cement and high volumes of low-calcium fly ash.” (1989). 【15】 陳朝和,「飛灰混凝土使用手冊」,台電公司煤灰處理與利用小組,1987,。 【16】 Malhotra, V.M., “Superplasticized Fly Ash Concrete for Structural Applications,” ACI Concrete International, V. 8, No.12, PP. 28-31, Dec. (1986). 【17】 V.M. Malhotra, P.K. Mehta, ”High-Performance, High-Volume Fly Ash Concrete for Building Sustainable and Durable Structures”, January 2008. 【18】 台灣電力綜合研究所,「飛灰利用之研究(一)、(二)」,民國76年1月。 【19】 Neville, A.M., and G. Winter, “Design of Concrete Structure,” PP. 177~218, Eleventh Edition, McGraw-Hill, Inc., 1991. 【20】 陳宏謀、江式鴻,「鋼筋混凝土觀念分析」,文笙書局,March 1993。 【21】 周兆為(高健章指導),「高度與間距對水平鋼筋握裹力之影響」,碩士論文,國立台灣大學土木工程研究所,June 1997。 【22】 Reza Esfahani, M. and B. Vijaya Rangan, “Local Bond Strength of Reinforcing Bars in Normal Strength and High-Strength Concrete ( HSC ),” ACI Structure Journal, Vol. 95, No. 2, March -April 1998. 【23】 Jumikis, A.R., “Soil Mechanics,” Van Nostrand, Ch-15, 1962 【24】 Powere, T.C., “The Properites of Fresh Concrete,” John Wiley & Sons, Inc., 1968 【25】 林秉如、陳建年、劉年華,「土木材料」,高立圖書,1998 【26】 Lutz, L.A., and P. Gergely and G. Winter, “The Mechanics of Bond and Slip of Deformed Reinforcing Bar in Concrete,”Structural Engineering Report, No.324, Cornell University, August 1966. 【27】 ACI Committee 408, ”Bond Stress-The State of the Art,” ACI Journal, Vol. 63, November 1966. 【28】 Anand, Y.N., and R.A. Briggs, “Cracking of Fresh Concrete as Related to Reinforcement-Discussion,” ACI Journal Vol.73, February 1976. 【29】 Mathey, R.G. and D. Watstein, ”Investigation of Bond in Beam and Pull-Out Specimens with High-Yield-Strength Deformed Bars,” ACI Journal, Vol.62, PP. 1071-1090, March 1961. 【30】 陳廷湘(高健章指導),「混凝土浮水對鋼筋握裹力之影響」,碩士論文,國立台灣大學土木工程研究所,June 1977。 【31】 Jirsa, J.O., J.E. Breen, J.J. Luke, and B.S. Hamad, “Effect of Casting Position on Bond,” Bond in Concrete, Edited by Bartos, P., Applied Science Publishers London, PP. 300-307, 1982. 【32】 Donahey, R.C. and D. Darwin, “Bond of Top-Cast Bars in Bridge Decks,” ACI Journal PP. 57-66, January-February 1985. 【33】 Brettmann, B.B., D. Darwin and R.C. Donahey, “Bond of Reinforcment to Superplasticized Concrete,” ACI Journal, PP.98-107, January-February 1986. 【34】 Jeanty, P.R., D. Mitchell and M.S. Milza, “Investigation of Top Bar Effects in Beams,” ACI Structural Journal, PP. 251-257, May-June 1988. 【35】 J D Parkinson, “Workability and Flow Behavior, Pumped Concrete,” Concrete Rev. reprinted by PCCA, UK., December 1971. 【36】 R D Browne, P B Bamforth, Tests to Establish Concrete Pumpability, ACI Journal, PP.193-202, May 1977. 【37】 R A Crepas, Pumping Concrete Techniques and Applications, Concrete Constructions, Publ. Inc., USA, PP. 2.1-2.15, 1985. 【38】 A N Ede, The Sleeve Pump for Semi-Solids, Mag of Conc. Res. V.10, N28, PP.17-22, 1958. 【39】 陳育聖(詹穎雯指導),「自充填混凝土之工程性質」,碩士論文,國立台灣大學土木工程研究所,June 2000。 【40】 陳永國(詹穎雯指導),「SCC之鋼筋握裹性質與橋柱韌性行為之研究」,碩士論文,國立台灣大學土木工程研究所,June 2001。 【41】 EI-Dash, K.M., and Ahmad, S.H., “Model for the stress-strain relationship of rectangular confined normal and high strength concrete columns,” Material and Structures, Vol.27, No.174, PP.572-579, Dec 1994. 【42】 S.A. Mirza, and J.G. MacGregor, “Variability of Mechanical Properties of Reinforcing Bars,” Journal of the Structural Division, ASCE, Vol. 105, NO.5, PP.921-937, May 1979 【43】 陳駿(詹穎雯指導),「高摻量飛灰混凝土配比設計與力學行為探討」,碩士論文,國立台灣大學土木工程研究所,June 2010。 【44】 鄧羽恬(詹穎雯指導),「混凝土工作性與模板材質對清水混凝土表面特性之影響」,碩士論文,國立台灣大學土木工程研究所,June 2010。 【45】 馬保國,彭觀良,胡曙光,吕林女,「泵送混凝土可泵性的评价方法浅探」,山東建材第五期,2000。 【46】 張晏清,「混凝土的泵送壓力與壓力泌水」,混凝土與水泥製品,1995。 【47】 Nilson,A.H., and G. Winter, “Design of Concrete Structure,” Eleventh Edition, McGraw-Hill, Inc. PP.177~218, 1991 【48】 山崎健一,林其如譯,「日本阪神淡路大震災建築外牆磁磚損壞概況與耐震對策」,磁磚材料科技與營造施工技術研習會,PP.24,1999。 【49】 Momayez,A., Ramezanianpour, A. A., Rajaie, H., and Ehsani, M. R., “Bi-Surface Shear Test for Evaluating Bond between Existing and New Concrete,” ACI MATERIALS JOURNAL, PP.90~100, March-April, 2004 【50】 林宜清,「新舊混凝土界面黏結品質之檢測評估」,土木技術第三卷第12期, Dec 2000 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31062 | - |
dc.description.abstract | 飛灰為燃煤火力發電廠之副產物,是可善加利用的材料,早期飛灰並未被妥善利用,棄置時往往造成環境污染問題,因此飛灰的再利用即為一重要的課題。飛灰屬性為卜作嵐材料,可作為混凝土礦物摻料,除可避免資源的浪費外,更可節省可觀的處置成本。以飛灰作為混凝土的礦物摻料,有降低混凝土水化熱、提高混凝土長期抗壓強度與耐久性、節省混凝土成本等優點。基於資源有效利用考量,飛灰應被推廣應用到公共工程混凝土上。不過,使用過程若缺乏正確的方法,反而會影響混凝土與工程之品質。
高摻量飛灰混凝土在國外已有多起的工程案例,但在國內將高摻量飛灰混凝土運用於工程上的發展尚屬啟蒙階段,故本論文的目的即在對高摻量飛灰混凝土的工程性質做一探討。 本研究之內容主要分成施工性與介面力學性質兩大部分。施工性方面主要為針對高摻量飛灰混凝土進行泵送性的評估與鋼筋握裹力的試驗。介面力學性質方面包含不同混凝土表面情形的砂漿層黏結力與使用不同模板所澆置出的混凝土表面緻密度探討。 本研究試驗之結果顯示,飛灰取代率越高,泵送時需要的壓力越大。高摻量飛灰混凝土的鋼筋握裹力可達到SCC的等級,且頂筋效應較OPC來說較不明顯。使用新木模的模板所澆置出的混凝土表面粗糙度差異情形較大,表面情形較不一致。而使用新芬蘭板和舊木模澆置出的混凝土表面情形較一致。 | zh_TW |
dc.description.provenance | Made available in DSpace on 2021-06-13T02:27:50Z (GMT). No. of bitstreams: 1 ntu-100-R98521230-1.pdf: 6475027 bytes, checksum: ed8839eaa079d0b9a16fa07f3642f4d6 (MD5) Previous issue date: 2011 | en |
dc.description.tableofcontents | 誌謝 一
摘要 三 目錄 五 表目錄 九 圖目錄 十一 照片目錄 十五 第1章 緒論 1 1.1 研究動機與目的 1 1.2 研究範圍與內容 2 第2章 文獻回顧 5 2.1 高性能混凝土 5 2.2 卜作嵐材料 8 2.3 飛灰混凝土 9 2.3.1 飛灰 9 2.3.1.1 飛灰的來源與分類 10 2.3.1.2 飛灰的成分及性質 11 2.3.1.3 飛灰主要水化反應機理 11 2.3.1.4 添加飛灰對混凝土之影響 12 2.3.2 高飛灰混凝土 15 2.3.3 國內飛灰利用現況 17 2.3.4 高飛灰摻量混凝土國外應用案例介紹 19 2.4 泵送混凝土之流質行為 22 2.4.1 混凝土的泵送情形 22 2.4.2 混凝土流變行為 23 2.5 鋼筋混凝土之握裹力 25 2.5.1 基本原理 25 2.5.1.1 握裹強度的力學行為 25 2.5.2 鋼筋周圍混凝土的應力情況 29 2.5.3 束制條件對握裹力的影響 30 2.5.4 混凝土浮水對水平鋼筋握裹力的影響 30 2.5.5 鋼筋握裹力之相關文獻 32 2.6 砂漿層黏著機制 36 2.7 表面孔隙 37 第3章 實驗計畫 39 3.1 實驗內容 39 3.2 基本試驗材料及儀器 40 3.2.1 基本試驗材料 40 3.2.2 基本試驗儀器 41 3.3 壓力泌水試驗 43 3.3.1 試驗材料 43 3.3.2 實驗儀器 43 3.3.3 試體拌合方法 43 3.3.4 壓力泌水試驗方法 44 3.4 泵送試驗 45 3.4.1 試驗材料 45 3.4.2 試驗儀器 45 3.4.3 坍流度試驗 46 3.4.4 抗壓強度試驗 47 3.4.5 泵送試驗內容及流程規劃 47 3.5 鋼筋拉拔試驗 49 3.5.1 試驗材料 49 3.5.2 實驗儀器與設備 49 3.5.3 試體製作 50 3.5.4 加載儀器與設備 51 3.5.5 滑移量量測儀器設計 51 3.5.6 試驗變數與內容 52 3.5.7 試驗步驟 52 3.6 表面拉拔試驗 53 3.6.1 試驗材料 53 3.6.2 試驗儀器 53 3.6.3 試驗變數與內容 54 3.6.4 試驗步驟 54 3.7 快速氯離子試驗 55 3.7.1 試驗材料 55 3.7.2 試驗內容與變數 55 3.7.3 試驗步驟 55 第4章 實驗結果與討論 57 4.1 壓力泌水試驗結果 57 4.1.1 飛灰含量對壓力泌水之影響 57 4.1.2 飛灰含量對泵送性評估之討論 58 4.2 泵送試驗結果 59 4.2.1 泵送前後新拌性質與力學性質比較 59 4.2.2 泵送壓力曲線說明 59 4.2.3 泵送速率計算說明 60 4.2.4 泵送壓力分析 60 4.2.5 綜合討論 62 4.3 鋼筋拉拔試驗 63 4.3.1 拉拔試驗之應力曲線 63 4.3.2 握裹力判斷方法 63 4.3.3 齡期對飛灰混凝土鋼筋握裹力之影響 65 4.3.4 高程對飛灰混凝土鋼筋握裹力之影響 65 4.3.5 文獻比較 66 4.4 表面拉拔試驗 67 4.4.1 破壞模式 67 4.4.2 不同模版對砂漿層黏結的影響 68 4.4.3 不同表面處理方式對砂漿層黏結的影響 69 4.4.4 表面處理對不同模板砂漿層黏結的影響 69 4.5 快速氯離子試驗 70 4.5.1 不同模版快速氯離子試驗之結果 70 4.5.2 不同模版表面緻密度之探討 71 第5章 結論與建議 73 5.1 結論 73 5.1.1 飛灰混凝土施工性 73 5.1.2 飛灰混凝土介面性質 74 5.2 建議 75 參考文獻 77 | |
dc.language.iso | zh-TW | |
dc.title | 飛灰混凝土之施工性與介面力學性質探討 | zh_TW |
dc.title | Study on Constructability and Interface Mechanical Properties of Fly Ash Concrete | en |
dc.type | Thesis | |
dc.date.schoolyear | 99-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 劉楨業,楊仲家 | |
dc.subject.keyword | 飛灰,壓力泌水,泵送,鋼筋握裹力,砂漿層黏結力,快速氯離子試驗, | zh_TW |
dc.subject.keyword | fly ash,Bleeding under pressure,pumping,Reinforcement bond strength,mrotar adhesion,RCPT, | en |
dc.relation.page | 148 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2011-08-01 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 6.32 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。