請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/29256
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 王暉 | |
dc.contributor.author | Chun-Lin Kuo | en |
dc.contributor.author | 郭俊麟 | zh_TW |
dc.date.accessioned | 2021-06-13T01:03:27Z | - |
dc.date.available | 2008-07-27 | |
dc.date.copyright | 2007-07-27 | |
dc.date.issued | 2007 | |
dc.date.submitted | 2007-07-23 | |
dc.identifier.citation | [1] On San A. Tang and S. Aitchison Colin, “A very wide-band microwave MESFET mixer using the distributed mixing principle,” IEEE Trans. MTT, vol.33, no.12, pp. 1470-1478, Dec. 1985
[2] D. Hollmann, R. heilig, and G.Baumann, “A monolithic broadband 10-50 GHz distributed HEMT mixer including active LO-RF combiner,” in 1994 IEEE GaAs IC Symp. Dig., pp. 100-103, Oct. 1994. [3] W. Ko, Y. Kwon, “A GaAs-based 3-40 GHz distributed mixer with cascade FET cells,” Radio Frequency Integrated Circuits Symposium, pp. 413-416, Jun. 2004 [4] K. L. Deng and Huei Wang, “A 3-33 GHz PHEMT mmic distributed drain mixer,” in IEEE RFIC Symp. Dig., pp. 151-154, Jun. 2002 [5] F.-C. Chang, P.-C. Huang, S.-F. Chao, and H. Wang, “A low power folded mixer for UWB system applications in 0.18-μm CMOS technology,” IEEE Microwave and Wireless Component Letters, vol. 17, issue 5, pp. 367-369, May 2007. [6] C.-S. Lin, P.-S. Wu, H.-Y. Chang and H. Wang, “A 9-50-GHz Gilbert-cell down-conversion mixer in 0.13-μm CMOS technology,” IEEE Microwave and Wireless Component Letters, vol. 16, pp. 293-295, May 2006. [7] M.-D. Tsai and H. Wang, “A 0.3-25-GHz ultra-wideband mixer using commercial 0.18-μm CMOS technology,” IEEE Microwave and Wireless Component Letters, vol. 14, no. 11, pp. 522-524, Nov. 2004. [8] J.-H. Tsai, P.-S. Wu, C.-S. Lin, T.-W. Huang, John G.-J. Chern and W.-C. Huang, “A 25-75 GHz broadband Gilbert-Cell mixer using 90-nm CMOS technology,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 4, pp. 247-249, April, 2007. [9] W. C. Chen, S. Y. Chen, J. H. Tsai, T. W. Huang, and H. Wang, “A 38-48-GHz miniature MMIC subharmonic mixer,” in Proc. Gallium Arsenide Applications Symp. (GAAS 2005), Oct., 2005, pp. 437-440 [10] P. Blount, and C. Trantanella, “A high IP3, subharmonically pumped mixer for LMDS application,” in Proc. Gallium Arsenide Applications Symp. (GAAS 2000), Nov., 2000, pp. 171-174. [11] M. Bao, H. Jacobsson, L. Aspemyr, G. Carchon, and X. Sun, “A 9-31-GHz subharmonic passive mixer in 90-nm CMOS technology,” IEEE J. Solid-State Circuits, vol. 11, no. 10, pp. 2257-2264, Oct. 2006. [12] A. H. Darsinooieh and O. Palamutcuoglu, 'On the theory and design of subharmonically drain pumped microwave MESFET distributed mixers,' Electrotechnical Conference, 1996, pp. 595-598 vol.1. [13] B. Razavi, RF Microelectronics, Prentice Hall, 1998. [14] Keng Leong Fong and Robert G. Meyer, “Monolithic RF active mixer design,” IEEE Trans., Circuits and Systems, Vol. 46, Issue 3, pp. 231-239, Mar. 1999. [15] K. Kawakami, M. Shimozawa, H. Ikematsu, K. Itoh, Y. Isota, and O. Ishida, “A millimeter-wave broadband monolithic even harmonic image rejection mixer,” in IEEE MTT-S Int. Microwave Symp. Dig., pp. 1443-1446, June 1998. [16] M. Yu, Robert H. Walden, A. E. Schmitz, and M. Lui, “Ka/Q-band doubly balanced MMIC mixers with low LO power,” IEEE Microwave and Guided Wave Letters, vol. 10, no. 10, pp. 424-426, Oct. 2000. [17] M.-F. Lei, P.-S. Wu, T.-W. Huang, and H. Wang, “Design and analysis of a miniature W-band MMIC subharmonically pumped resistive mixer,” in IEEE MTT-S Int. Microwave Symp. Dig., 2004, pp. 235-238. [18] Ali Hajimiri, “Distributed integrated circuits: and alternative approach to high-frequency design,” IEEE communication Magazine, pp. 168-173, Feb. 2002. [19] W. S. Percival, British Patent Specification, No. 460,562, applied for July 24, 1936 [20] Design Manual of 1P8M 0.13-μm CMOS, TSMC. [21] D. M. Pozar, Microwave Engineering. New York: Wiley, 1998. [22] P. Phillipe, and M. Pertus, “A 2-GHz enhancement mode GaAs down converter IC for satellite TV tuner,” IEEE Microwave and Millimeter-Wave Monolithic Circuits Symposium Digest of Papers, 1991, p. 61 [23] T. Hirota, A. Minakawa, and M. Muraguchi, “Reduced-size branch-line and rat-race hybrid for uniplanar MMIC’s,” IEEE Trans. Microwave Theory Tech., vol. 38, pp. 270-275, Mar. 1990. [24] Kian Sen Ang, Yoke Choy Leong, “Converting baluns into broad-band impedance-transforming 180∘hybrids,” IEEE Transactions on Microwave Theory and Techniques, Vol. 50, pp. 1990-1995, Aug. 2002. [25] G. Kathiresan, C. Toumazou, “A low voltage bulk driven downconversion mixer core,” IEEE International Symposium on Circuits and Systems, 1999, vol. 2, pp. 598-561, June. 1999. [26] P.J. Sullivan, B.A. Xavier and W.H. Ku, “Low voltage performance of a microwave CMOS Gilbert cell mixer,” IEEE Jounal of Solid-State circuits, vol. 32, no. 7, pp. 1151-1155, July 1997. [27] J. C. Rudell, J. J. Ou, T. B. Cho, G. Chien, F. Brianti, J.A. Weldon and P.R. Gray, “A 1.9 GHz wide-band IF double conversion CMOS integrate receiver for cordless telephone applications,” IEEE Journal of Solid-State Circuits, vol. 32, no. 12, pp. 2071-2088, Dec. 1997 [28] L. Abdulkerim, P. E. Allen and X. Shi, “Low voltage analog IC design in CMOS technology”, IEEE Transactions on Circuits and Systems-I, vol. 42, no. 11, pp. 955-958, Nov, 1995. [29] P. E. Allen, B. J. Blalock and G. A. Rincon, “A 1V CMOS op-amp using bulk driven MOSFETs,” 1995 IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 192-193. [30] A. Rofougaran, J. Y. C. Chang, M. Rofougaran and A. Abidi, “A 1 GHz CMOS RF front-end IC for a direct conversion wireless receiver,” IEEE Journal of Solid-State Circuits, vol. 31, no. 7, pp. 880-889, July 1996. [31] C. Kienmayer, M. Tiebout, W. Simburger, A.L. Scholtz, “A low-power low-voltage NMOS bulk-mixer with 20 GHz bandwidth in 90 nm CMOS,” IEEE International Symposium on Circuits and Systems, Vol. 4, pp. 385-388, May 2004. [32] P.-S. Wu, C.-H. Wang, T.-W. Huang, and H. Wang, “Compact and broad-band millimeter-wave monolithic transformer balanced mixers,” IEEE Trans. MTT, vol. 53, no. 10, pp. 3106-3114, Oct. 2005. [33] A. Verma, K. K. O, J. Lin, ”A low-power up-conversion CMOS mixer for 22-29-GHz ultra-wideband applications,” IEEE Transactions on Microwave Theory and Techniques, Vol. 54, pp. 3295-3300, Aug. 2006. [34] F. L. Di Alessio, and A. D’Orazio, “Sub-harmonically pumped direct vector modulator,” IEEE Electronics Lett., vol. 39, no. a, pp. 70-71, Jan. 2003. [35] T. O’Connell, P.J. Murphy, A. Murphy, “A direct I/Q modulator at microwave frequencies using GaAs MESFETS,” Microw. J., 1994, 37, pp. 62-76. [36] Design Manual of 1P9M 90-nm CMOS, TSMC [37] L. Sheng, J. C. Jensen, and L. E. Larson, “A wide-bandwidth Si/SiGe HBT direct conversion sub-harmonic mixer/downconverter,” IEEE J. Soli -State Circuits, vol. 35, no. 9, pp. 1329-1337 Sep. 2000. [38] M. Goldfarb, E. Balboni, and J. Cavey, “Even harmonic double-balanced active mixer for use in direct conversion receivers,” IEEE J. Solid State Circuits, vol. 38, no. 10, pp. 1762-1766, Oct. 2003. [39] K.-J. Koh, M.-Y. Park, C.-S. Kim, and H.-K. Yu, “Subharmonically pumped CMOS frequency conversion (up and down) circuits for 2-GHz WCDMA direct-conversion transceiver,” IEEE J. Solid State Circuit, vol. 39, no. 6, pp. 871-884, June 2004. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/29256 | - |
dc.description.abstract | 混波器在傳統收發系統中,佔有相當重要的角色,而且對於系統特性的影響甚鉅。而一個好的調變器,在數位訊號的調變系統中,也扮演著關鍵的角色。在過去的研究中,混波器常以二極體或是晶體檢測器的架構實現,而近年因半導體製程的研發與成長,產生了相當多由主動式元件組成的混波器架構,因此,利用新的半導體製程來設計出特性良好的混波器及調變器,是一個相當值得探討的主題。
本論文的主題在於利用先進的半導體製程,設計出特性良好且寬頻的混波器 ,以及利用混波器的基本特性,來組成一個高頻的調變器。論文主要可分為三大部分,第一部份介紹混波器及調變器的功能,基本設計原理以及設計時架構的考量。第二部份討論應用於毫米波的寬頻降頻混波器的原理,本論文提出兩個寬頻的降頻混波器,並會說明其架構以及設計的原理。第一個電路使用台積電0.13微米金氧半互補式製程提出一個分佈式的次諧波混波器,成功的實現了一個30-68 GHz的寬頻次諧波混波器。此晶片的面積僅有0.36平方毫米。除此之外,利用製程的特性,我們設計了一個由基體驅動的混波器,操作在11-35 GHz,其直流功率損耗僅有6 mW。應用於毫米波的調變器設計亦是本論文的討論重點,最後一個部份將討論調變器之設計與原理,並利用台積電90奈米金氧半互補式製程,設計了一個作用於70 GHz的四相位次諧波調變器,而其面積為0.51平方微米,我們亦將討論其特性與調變器中匹配的影響。 | zh_TW |
dc.description.abstract | Mixer plays an important role in a transceiver system. The characteristics affect the performance of the system. A modulator is also very important in a direct-conversion system. Therefore, to design high frequency mixers and modulators with good performance is important.
The goal of the thesis is to design and implement wideband mixers and high frequency IQ modulator. The thesis includes three parts. The first part introduces the basic concept and design parameters of the mixers and modulators. In the second part, we employed the distributed topology to design a wideband sub-harmonic mixer. The concept of distributed circuits will also be described in this part. The distributed sub-harmonic mixer was fabricated using TSMC 0.13-um CMOS technology. From the measurement results, the mixer achieved a conversion loss of 11 dB from 30 to 68 GHz with a compact size of 0.36 mm2. In addition, a bulk-pumped fundamental mixer is designed and implemented in this part and the theory is introduced. With the advantages of low supply voltage and power consumption, the mixer demonstrates a conversion gain of -3 to 0 dB from 11 to 35 GHz. The total power consumption is only 6 mW, included the IF output buffer amplifier. Finally, a sub-harmonic IQ modulator using TSMC 90-nm CMOS technology is implemented and the design concept is also presented. How the matching network between mixer cell and 90° phase shifter affects the image rejection will also be discussed. | en |
dc.description.provenance | Made available in DSpace on 2021-06-13T01:03:27Z (GMT). No. of bitstreams: 1 ntu-96-R94942016-1.pdf: 7230442 bytes, checksum: deae485b290546a42d77923ed95527c0 (MD5) Previous issue date: 2007 | en |
dc.description.tableofcontents | Chapter 1 Introduction…………………………… ………… 1
1.1 Background and Motivation …………………………… 1 1.2 Literature Survey………………………………………. 2 1.3 Contribution….…………………………………….…… 4 1.4 Chapter Outlines……………………………………… 5 Chapter 2 General Background of Mixer and Modulator... 7 2.1 Principle of Mixers…………………………… ……… 8 2.1.1 Introduction…………………………….……………. 8 2.1.2 Fundamental of Mixers……………… .……………. 9 2.1.3 Performance Parameters of Mixers.…….……….. 11 2.2 Principle of Modulators…… …………………….... 19 2.2.1 Introduction......…………………………….……. 19 2.2.2 Design Considerations of Modulators……………. 20 Chapter 3 Design of Distributed Sub-harmonic Mixer….…23 3.1 Overview………………………………………………….. 23 3.1.1 Sub-harmonic Mixer……………………………….…. 23 3.1.2 Distributed Mixer…………………………………... 24 3.2 Distributed Sub-harmonic Mixer Design…………… 27 3.2.1 Foundry Description………………………………… 27 3.2.2 Design Flow of the Distributed Sub-harmonic Mixe 27 3.2.3 Measurement Results………………………………... 38 3.2.4 Performance Summary………………………………… 43 3.3 Discussions..……………… ……………………….... 45 Chapter 4 Design of the Bulk-pumped Mixer………….…….48 4.1 Design Principle of Bulk-pumped Mixer………..…… 48 4.2 Design of the Bulk-pumped Mixer…………… …….. 54 4.2.1 Design Flow of the Bulk-pumped Mixer…………… 54 4.2.2 Measurement Result…………………………………… 60 4.2.3 Performance Summary…………… …………………… 64 4.3 Discussions……...……………………………………… 64 Chapter 5 Design of Sub-harmonic IQ Modulator……………67 5.1 Design Principle of Sub-harmonic Modulator……… 68 5.2 Design of the Sub-harmonic Modulator………… …. 70 5.2.1 Foundry Description…………...…………………… 70 5.2.2 Design of the Sub-harmonic Modulator………….. 71 5.2.3 Measurement Results………………………………... 80 5.2.4 Performance Summary…………………………………. 86 5.3 Discussions..……………………… …………………… 86 Chapter 6 Conclusions..… ……………………..…….………91 References…………………………… ………………..…………93 | |
dc.language.iso | en | |
dc.title | 應用於微波及毫米波混波器及調變器之研製 | zh_TW |
dc.title | Design of Mixers and Modulators for Microwave and Millimeter-wave Application | en |
dc.type | Thesis | |
dc.date.schoolyear | 95-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 陳咨吰,鐘世忠,林坤佑,張鴻埜 | |
dc.subject.keyword | 混波器,調變器,毫米波, | zh_TW |
dc.subject.keyword | Mixer,Modulator,Millimeter-wave, | en |
dc.relation.page | 96 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2007-07-24 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電信工程學研究所 | zh_TW |
顯示於系所單位: | 電信工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-96-1.pdf 目前未授權公開取用 | 7.06 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。