請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/26041完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 林清富(Ching-Fuh Lin) | |
| dc.contributor.author | Yu-Min Shen | en |
| dc.contributor.author | 沈祐民 | zh_TW |
| dc.date.accessioned | 2021-06-08T06:59:01Z | - |
| dc.date.copyright | 2011-08-18 | |
| dc.date.issued | 2011 | |
| dc.date.submitted | 2011-08-15 | |
| dc.identifier.citation | 第一章
[1] http://www.eia.doe.gov/oiaf/ieo/world.html International Energy Outlook 2010 [2] http://www.leonardo-energy.org/drupal/node/306 Pathways to 2050 - the role of electricity in a carbon constrained world [3] M. A. Green, “The Path to 25% Silicon Solar Cell Efficiency: History of Silicon Cell Evolution,” Prog. Photovoltaics 17, 183-189 (2009). [4] 蔡進譯, ”超高效率太陽電池-從愛因斯坦的光電效應談起”, 物理雙月刊 27 701-719 (2005)。 [5] J. Zhao, A. Wang, M. A. Green, and F. Ferrazza, “19.8% efficient “honeycomb” textured multicrystalline and 24.4% monocrystalline silicon solar cells,” Appl. Phys. Lett. 73, 1991 (1998). [6] Lawrence Kazmerski, “NREL Compilation of best research solar cell efficiencies,” National Renewable Energy Laboratory (NREL), Golden, Colorado (2010). [7] G. Conibeer, “Third-generation photovoltaics,” Mater. Today 10, 42-50 (2007). [8] National Applied Research Laboratories, NARL Quarterly July 27, 12-22 (2010). [9] H. Tsubomura, M. Matsumura, Y. Nomura, T.Amamiya, “Dye sensitised zinc oxide: aqueous electrolyte: platinum photocell,” Nature 261, 402-403 (1976). [10] B. O'Regan and M. Gratzel, “A low-cost, high- efficiency solar cell based on dye-sensitized colloidal TiO2 films,” Nature 353, 737 (1991). [11] C. W. Tang, “Two-layer organic photovoltaic cell,” Appl. Phys. Lett. 48, 183 (1986). [12] H. Hoppe, N. S. Sariciftci, “Organic solar cells: An overview,” J. Mater. Res. 19, 1924-1945 (2004). [13] 張正華，李陵嵐，葉楚平，楊平華，馬振基, 有機與塑膠太陽能電池, 五南圖書出版公司, Taipei (2008)。 [14] N. Espinosa , H. F. Dam, D. M. Tanenbaum, J. W. Andreasen , M. Jorgensen, F. C. Krebs, “Roll-to-Roll Processing of Inverted Polymer Solar Cells using Hydrated Vanadium(V)Oxide as a PEDOT:PSS Replacement,” Mater. 4(1), 169-182 (2011). [15] 韓于凱,『塑膠材料』研發團隊簡訊（第三期）。 [16] L. J. A. Koster, D. E. Markov, “Device Physics of Polymer: Fullerene Bulk Heterojunction Solar Cells,” Adv. Mater. 19, 1551-1566 (2007). [17] A. Moliton and J. M. Nunzi, “How to model the behaviour of organic photovoltaic cells,” Polym. Int. 55, 583 (2006). [18] N. S. Sariciftci, L. Smilowitz, A. J. Heeger, and F. Wudl, “Photoinduced electron transfer from a conducting polymer to buckminsterfullerene,” Science 258, 1474-1476 (1992). [19] 蕭傑予,無機奈米線與有機材料混成太陽能電池之研究, 國立臺灣大學電機資訊學院光電工程學研究所碩士論文 (2008)。 [20] http://www.optoiq.com/index/photonics-technologies-applications/lfw-display/lfw-article-display/361941/articles/laser-focus-world/features/photovoltaics-measuring-the-sun.html PHOTOVOLTAICS: Measuring the ‘sun’ [21] http://en.wikipedia.org/wiki/Sunlight Sunlight 第二章 [1] 張正華，李陵嵐，葉楚平，楊平華，馬振基, 有機與塑膠太陽能電池, 五南圖書出版公司, Taipei (2008). [2] H. Shirakawa, E. J. Louis, A. G. Macdiarmid, C. K. Chiang, and A. J. Heeger, “Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x,” J. Chem. Soc., Chem. Commun. 16, 578-580 (1977). [3] B. L. Groenendaal, F. Jonas, D. Freitag, H. Pielartzik, and J. R. Reynolds, “Poly(3,4-ethylenedioxythiophene) and its derivatives: Past, present, and future,” Adv. Mater. 12, 481-494 (2000). [4] K.Y. Jen, G.G. Miller, and R.L. Elsenbaumer, “Highly conducting, soluble and environmentally stable poly(3-alkylthiophenes),” J. Chem. Soc., Chem. Commun. 17, 1346-1347 (1986). [5] I. F. Perepichka, D. F. Perepichka, H. Meng, and F. Wudl, “Light-Emitting Polythiophenes,” Adv. Mater. 17, 2281-2305 (2005). [6] Y. Kim, S. Cook, S. M. Tuladhar, S. A. Choulis, J. Nelson, J. R. Durrant, D. D. C. Bradley, M. Giles, I. McCulloch, C. S. Ha, and M. Ree, “A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells,” Nat. Mate. 5, 197-203 (2006). [7] D. Chirvase, Z. Chiguvare, M. Knipper, J. Parisi, V. Dyakonov, and J. C. Hummelen, “Temperature dependent characteristics of poly(3 hexylthiophene)-fullerene based heterojunction organic solar cells,” J. Appl. Phys. 93, 3376-3383 (2003). [8] V. Dyakonov, “Mechanisms controlling the efficiency of polymer solar cells,” Appl. Phys. A, Mater. Sci. Process. 79, 21-25 (2004). [9] G. Dennler, M. C. Scharber, and C. J. Brabec, “Polymer-Fullerene Bulk-Heterojunction Solar Cells,” Adv. Mater. 21, 1323-1338 (2009). [10] B. C. Thompson and J. M. J. Frechet, “Polymer–Fullerene Composite Solar Cells,” Angew. Chem., Int. Ed. 47, 58-77 (2008). [11] H. Kallmans and M. Pope, “Photovoltaic effect in organic crystals,” J. Chem. Phys. 30, 585-586 (1958). [12] K. M. Coakley and M. D. McGehee, “Conjugated polymer photovoltaic cells,” Chem. Mater. 16, 4533-4542 (2004). [13] G. A. Chamberlain, “Organic solar cells: A review,” Solar Cells 8,47 (1983). [14] D. Wöhrle and D. Meissner, “Organic solar cells,” Adv. Mater. 3, 129 (1991). [15] K. M. Coakley and M. D. McGehee, “Conjugated polymer photovoltaic cells,” Chem. Mater. 16, 4533-4542 (2004). [16] A.K. Gosh, D.L. Morel, T. Feng, R.F. Shaw, and C.A. Rowe, “Photovoltaic and rectification properties of Al/Mg phthalocyanine/Ag Schottky-barrier cells,” J. Appl. Phys. 45, 230 (1974). [17] S. Karg, W. Riess, V. Dyakonov, and M. Schwoerer, “Electrical and optical characterization of poly(phenylene-vinylene) light emitting diodes,” Synth. Met. 54, 27 (1993). [18] A. K. Ghosh and T.Fen, “Merocyanine organic solar cells,” J. Appl. Phys. 49, 5982-5989 (1978). [19] D.L. Morel, A.K. Gosh, T. Feng, E.L. Stogryn, P.E. Purwin, R.F. Shaw, and C. Fishman, “High-efficiency organic solar cells,” Appl. Phys. Lett. 32, 495 (1978). [20] C.W. Tang, “Two-layer organic photovoltaic cell,” Appl. Phys. Lett. 48, 183(1986). [21] G. Yu, J. Gao, J. C. Hummelen, F. Wudl, and A. J. Heeger, “Polymer Photovoltaic Cells - Enhanced Efficiencies Via a Network of Internal Donor-Acceptor Heterojunctions,” Science 270, 1789-1791 (1995). [22] G. Yu, A. J. Heeger, “Charge Separation and Photovoltaic Conversion in Polymer Composites with Internal Donor-Acceptor Heterojunctions,” J. Appl. Phys. 78, 4510-4515 (1995). [23] F. Padinger, R. S. Rittberger, N. S. Sariciftci, “Effects of Postproduction Treatment on Plastic Solar Cells,” Adv. Funct. Mater. 13, 85-88 (2003). [24] J. Y. Kim, S. H. Kim, H. H. Lee, K. Lee, W. L. Ma, X. Gong, and A. J. Heeger, “New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer,” Adv. Mater. 18, 572 (2006). [25] G. Li, V. Shrotriya, J. S. Huang, Y. Yao, T. Moriarty, K. Emery, and Y. Yang, ”High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends,” Nat. Mater. 4, 864-868 (2005). [26] M. Campoy-Quiles, T. Ferenczi, T. Agostinelli, P. G. Etchegoin, Y. Kim, T. D. Anthopoulos, P. N. Stavrinou, D. D. C. Bradley, and J. Nelson, “Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends,” Nat. Mater. 7, 158-164 (2008). [27] Z. Xu, L. M. Chen, G. W. Yang, C. H. Huang, J. H. Hou, Y. Wu, G. Li, C. S. Hsu, and Y. Yang, “Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells,” Adv. Funct. Mater. 19, 1227-1234 (2009). [28] S. A. Amautov, E. M. Nechvolodova, A. A. Bakulin, S. G. Elizarov, A. Khodarev, D. S. Martyanov, and D. Y. Paraschuk, “Properties of MEH-PPV films prepared by slow solvent evaporation,” Synth. Met. 147, 287-291 (2004). [29] V. Shrotriya, Y. Yao, G. Li, and Y. Yang, “Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance,” Appl. Phys. Lett. 89, 063505 (2006). [30] C. W. Chu, H. C. Yang, W. J. Hou, J. S. Huang, G. Li, and Y. Yang, “Control of the nanoscale crystallinity and phase separation in polymer solar cells”, Appl. Phys. Lett. 92, 103306 (2008). [31] http://www.energybandgap.com/power-generation/inverted-solar-cells/ Inverted solar cells 第三章 [1] G. Y. Kim, J. S. Oh, E. H. Choi, G. S. Cho, S. O. Kang, and J. Cho, “Work function change on O-plasma treated indium–tin-oxide,” Mater. Sci. Eng., B 100, 275-279 (2003). [2] M. Ohyama, H. Kouzuka, and T. Yoko, “Sol-gel preparation of ZnO films with extremely preferred orientation along (002) plane from zinc acetate solution,” Thin Solid Films 306, 78-85 (1997). [3] M. S. White, D. C. Olson, S. E. Shaheen, N. Kopidakis, and D. S. Ginley, “Inverted bulk-heterojunction organic photovoltaic device using a solution-derived ZnO underlayer,” Appl. Phys. Lett., 89 (2006). [4] M. R. Wang, J. Wang, W. Chen, Y. Cui, and L. D. Wang, “Effect of preheating and annealing temperatures on quality characteristics of ZnO thin film prepared by sol-gel method,” Mater. Chem. and Phys. 97, 219-225 (2006). [5] G. Li, V. Shrotriya, J. S. Huang, Y. Yao, T. Moriarty, K. Emery, and Y. Yang, “High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends,” Nat. Mater. 4, 864-868 (2005). [6] S. A. Amautov, E. M. Nechvolodova, A. A. Bakulin, S. G. Elizarov, A. Khodarev, D. S. Martyanov, D. Y. Paraschuk, “Properties of MEH-PPV films prepared by slow solvent evaporation,” Synth. Met. 147, 287-291 (2004). [7] C. Y. Chou, J. S.Huang, C. H.Wu, C.Y. Lee,and C. F. Lin, “Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells,” Sol. Energy Mater. Sol. Cells 93, 1608–1612 (2009). [8] M. D. Irwin, D. B. Buchholz, A. W. Hains, R. P. H. Chang, and T. J. Marks, “P-Type Semiconducting Nickel Oxide as an Efficiency-Enhancing Anode Interfacial Layer in Polymer Bulk-Heterojunction Solar Cells,” Proc. Natl. Acad. Sci. 105, 2783-2787 (2008). [9] 黃敬舜, 使用溶液製程開發有機無機三明治結構太陽能電池, 國立臺灣大學電機資訊學院光電工程學研究所博士論文 (2010)。 [10] http://www.optoiq.com/index/display/article-display/286515/articles/laser-focus-world/volume-43/issue-3/features/photovoltaics-enhancements-enable-solar-simulators-to-shed-light-on-new-photovoltaic-designs.html PHOTOVOLTAICS: Enhancements enable solar simulators to shed light on new photovoltaic designs [11] http://www.perkinelmer.com/Catalog/Family/ID/LAMBDA%2035%20UV%20Vis%20Systems LAMBDA 35 UV/Vis Systems [12] S. N. Magonov, V. Elings, and M. H. Whangbo , “Phase imaging and stiffness in tapping-mode atomic force microscopy,” Surf. Sci. 375, L385-L391 (1997). 第四章 [1] G. Yu, J. Gao, J. C. Hummelen, F. Wudl, and A. J. Heeger, “Polymer Photovoltaic Cells - Enhanced Efficiencies Via a Network of Internal Donor-Acceptor Heterojunctions,” Sci. 270, 1789-1791 (1995). [2] G. Yu, and A. J. Heeger, “Charge Separation and Photovoltaic Conversion in Polymer Composites with Internal Donor-Acceptor Heterojunctions,” J. Appl. Phys. 78, 4510-4515 (1995). [3] F. Padinger, R. S. Rittberger, and N. S. Sariciftci, “Effects of Postproduction Treatment on Plastic Solar Cells,” Adv. Funct. Mater. 13, 85-88 (2003). [4] A.C. Mayer, S.R. Scully, B.E. Hardin, M.W. Rowell, and M.D. McGehee, “Polymer-Based Solar Cells,” Mater. Today 10, 28-33 (2007). [5] K.M. Coakley, M. D. McGehee, “Conjugated polymer photovoltaic cells,” Chemistry of Materials 16, 4533-4542 (2004). [6] V. Dyakonov, “Mechanisms controlling the efficiency of polymer solar cells,” Appl. Phys. A, Mater. Sci. Process 79, 21-25 (2004). [7] G. Dennler, M. C. Scharber, and C. J. Brabec, “Polymer-Fullerene Bulk-Heterojunction Solar Cells,” Adv. Mater. 21, 1323-1338 (2009). [8] G. Li, V. Shrotriya, J. S. Huang, Y. Yao, T. Moriarty, K. Emery, and Y. Yang, “High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends,” Nat. Mater. 4, 864-868 (2005). [9] S. S. Pandey, W. Takashima, S. Nagamatsu, T. Endo, M. Rikukawa, and K. Kaneto, “Mechanism of Photocarrier Generation and Transport in Poly(3-Alkylthiophene) Films,” Jpn. J. Appl. Phys. 39, 6309-6315 (2000). [10] U. Zhokhavets, T. Erb, G. Gobsch, M. Al-Ibrahim, and O. Ambacher, “Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells,” Chem. Phys. Lett. 418, 347–350 (2006). [11] F. Padinger, R. S. Rittberger, and N. S. Sariciftci, “Effects of Postproduction treatment on plastic solar cells,” Adv. Funct. Mater., 13,85-88 (2003). [12] Y. Kim, S. A. Choulis, J. Nelson, D. D. C. Bradley, S. Cook, J. R. Durrant, “Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene,” Appl. Phys. Lett. 86, 063502 (2005). [13] W. Ma, C. Yang, X. Gong, K. Lee, and A. J. Heeger, “Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology,” Adv. Funct. Mater. 15, 1617-1622 (2005). [14] G. Li, V. Shrotriya, Y. Yao, and Y. Yang, “Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene),” J. Appl. Phys. 98, 043704 (2005). [15] H. Kim, W. W. So, and S. J. Moon, “The importance of post-annealing process in the device performance of poly-(3-hexylthiophene):methanofullerene polymer solar cell,” Sol. Energy Mater. Sol. Cells 91, 581-587 (2006). [16] H. Hoppe, M. Niggemann, C. Winder, J. Kraut, R. Hiesgen, A. Hinsch,D. Meissner, and N. S. Sariciftci, “Nanoscale Morphology of Conjugated Polymer/Fullerene-Based Bulk- Heterojunction Solar Cellsm,” Adv. Funct. Mater. 14, 1005-1011 (2004). [17] W. Ma, C. Yang, X. Gong, K. Lee, and A. J. Heeger, “Thermally stable, efficiency polymer solar cells with nanoscale control of the interpenetrating network morphology,” Adv. Funct. Mater. 15, 1617-1622 (2005). [18] F. C. Chen, H. C. Tseng, C. J. Ko, “Solvent mixtures for improving device efficiency of polymer photovoltaic devices,” Appl. Phys. Lett. 92, 103316 (2008). [19] G. Sharma, V. Singh Choudhary, and M. Roy, “Effect of annealing on the optical, electrical, and photovoltaic properties of bulk hetero-junction device based on PPAT:TY blend,” Sol. Energy Mater. Sol. Cells 91, 275-284 (2007). [20] Y. Li, Y. Hou, Y. Wang, Z. Feng, B. Feng, L. Qin, and F. Teng, “Thermal treatment under reverse bias: Effective tool for polymer/fullerene bulk heterojunction solar cells,” Synth. Met. 158, 190-193 (2008). [21] F. Padinger, R.S. Rittberger, and N. S. Sariciftci, ”Effects of post production treatment on plastic solar cells,” Adv. Funct. Mater. 13, 85-88 (2003). [22] Z. Xu, L. M. Chen, G. Yang, C. H. Huang, J. Hou, Y. Wu, G. Li, C. S. Hsu, and Y. Yang, “Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells,” Adv. Funct. Mater. 19, 1227-1234 (2009) [23] P. Peumans and S.R. Forrest, “Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells,” Appl. Phys. Lett. 79, 126-128 (2001). 第五章 [1] C. Winder and N. S. Sariciftci, “Low bandgap polymers for photon harvesting in bulk heterojunction solar cells,” J. Mater. Chem. 14, 1077-1086 (2004). [2] E. Bundgaard, and F. C. Krebs, “Low band gap polymers for organic photovoltaics,” Sol. Energy Mate. Sol. Cells 91, 954-985 (2007). [3] R. Kroona, M. Lenesa, J. C. Hummelenab, P. W. M. Bloma, and B. de BoeraSmall, “Bandgap Polymers for Organic Solar Cells (Polymer Material Development in the Last 5 Years),” Polym. Rev. 48, 531-582 (2008). [4] L. J. A. Koster, V. D. Mihailetchi, P. W. M. Blom, ”Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells,” Appl. Phys. Lett. 88, 093511 (2006). [5] A. Ajayaghosh, 'Donor–acceptor type low band gap polymers: polysquaraines and related systems, ' Chem. Soc. Rev. 32, 181-191 (2003). [6] C. Winder and N.S. Sariciftci, “Low bandgap polymers for photon harvesting in bulk heterojunction solar cells,” J. Mater. Chem. 14, 1077-1086 (2004). [7] C. Kitamura, S. Tanaka, and Y. Yamashita, “Design of Narrow-Bandgap Polymers. Syntheses and Properties of Monomers and Polymers Containing Aromatic-Donor and o-Quinoid-Acceptor Units,” Chem. Mater. 8, 570-578 (1996). [8] J.L. Bre′das, A.J. Heeger, and F. Wudl, “Towards organic polymers with very small intrinsic band gaps. I. Electronic structure of polyisothianaphthene and derivatives,” J. Chem. Phys. 85, 4673-4678 (1986). [9] M. Karikomi, C. Kitamura, S. Tanaka, and Y. Yamashita, “New Narrow-Bandgap Polymer Composed of Benzobis(1,2,5-thiadiazole) and Thiophenes,” J. Am. Chem. Soc. 117, 6791-6792 (1995). [10] M. Jayakannan, P. A. van Hal, and R. A. J. Janssen, “Synthesis and structure- property relationship of new donor–acceptor-type conjugated monomers and polymers on the basis of thiophene and benzothiadiazole,' J. Pol. Sci. A Pol. Chem 40, 251-261 (2002). [11] M. Chen, E. Perzon, M.R. Andersson, S. Marcinkevicius, S.K.M. Jonsson, M. Fahlman, and M. Berggren, “1 micron wavelength photo- and electroluminescence from a conjugated polymer,” Appl. Phys. Lett. 84, 3570-3572 (2004). [12] C. Kitamura, S. Tanaka, and Y. Yamashita, “Synthesis of new narrow bandgap polymers based on 5,7-di(2-thienyl)thieno[3,4-b]pyrazine and its derivatives,” J. Chem. Soc. Chem. Commun. 1585-1586 (1994). [13] H.Y. Chen, J. Hou, S. Zhang, Y. Liang, G. Yang, Y. Yang, L. Yu, Y. Wu, and G. Li, “Polymer solar cells with enhanced open-circuit voltage and efficiency,” Nat. Photon 3, 649-653 (2009). [14] S. H. Park, A. Roy, S. Beaupre′, S. Cho, N. Coates, J. S. Moon, D. Moses1, M. Leclerc, K. Lee, and A. J. Heeger, “Bulk heterojunction solar cells with internal quantum efficiency approaching 100%,” Nat. Photonics 3, 297-302 (2009). [15] C. Piliego, T. W. Holcombe, J. D. Douglas, C. H. Woo, P. M. Beaujuge, and J. M. J. Fre′chet, “Synthetic Control of Structural Order in N-Alkylthieno[3,4-c]pyrrole -4,6-dione-Based Polymers for Efficient Solar Cells,” J. Am. Chem. Soc. 132, 7595-7597 (2010). [16] Y. C. Chen, C. Y. Yu, Y. L. Fan, L.I. Hung, C. P. Chen, and C. Ting, “Low-bandgap conjugated polymer for high efficient photovoltaic applications,” Chem. Commun. 46, 6503–6505 (2010). [17] Y. Liang, Z. Xu, J. Xia, S. T. Tsai, Y. Wu, G. Li, C. Ray, and L. Yu, “For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%,” Adv. Mater. 22, E135–E138 (2010). [18] T. Y. Chu, J. Lu, S. Beaupr, Y. Zhang, J. R. Pouliot, S. Wakim, J. Zhou, M. Leclerc, Z. Li, J. Ding, and Y. Tao, “Bulk Heterojunction Solar Cells Using Thieno[3,4-c]pyrrole-4,6-dione and Dithieno[3,2-b:20,30-d]silole Copolymer with a Power Conversion Efficiency of 7.3%,” J. Am. Chem. Soc. 133, 4250–4253 (2011). [19] N. S. Sariciftci, L. Smilowitz, A. J. Heeger, and F. Wudl, “Photoinduced electron transfer from a conducting polymer to buckminsterfullerene,” Science 258, 1474-1476 (1992). [20] S. Cooka, H. Ohkitaa, Y. Kimc, J. J. Benson-Smithc, D. D. C. Bradley, and J. R. Durrant, “A photophysical study of PCBM thin films,” Chem. Phys. Lett. 445, 276–280 (2007). [21] C. Y. Chou, J. S. Huang, C.H. Wu, C.Y. Lee, and C. F. Lin, “Lengthening the polymer solidification time to improve the performance of polymer/ZnO nanorod hybrid solar cells,” Sol. Energy Mater. Sol. Cells 93, 1608-1612 (2009). | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/26041 | - |
| dc.description.abstract | 太陽能電池發展至今，仍以結晶矽太陽能電池為主流，然而最大缺點在於生產成本太高。有機高分子太陽能電池則提供另一種發電方式，其製程簡單、成本低廉，且具有透光性、大面積製造及可撓性的優點，顯示其巨大的發展潛力。在本論文中，我們藉由一種新的外加電場處理方式來提升有機高分子太陽能電池的效率表現，與先前的文獻比較，使用此處理方式的優點在於避免造成元件電極的破壞，還能夠配合有機高分子材料的極性方向來施加。我們利用化學軟體HyperChem (Hypercube Inc.)分析有機分子材料的極性方向，並針對極性方向進行外加水平方向電場處理，成功的提升元件效率。使用外加水平方向電場處理對於有機吸光層薄膜的表面形態有兩個重要的修飾：第一是當外加水平方向電場後，有機高分子材料會由於極性而受到電場影響而移動，且有機高分子材料主鏈會沿著有機吸光層薄膜表面垂直方向規則排列，因此載子便能經由主鏈有效且快速的傳遞到相對應的電極，提高載子遷移率。第二是由於有機高分子材料移動而造成薄膜表面粗糙度提升，由原子力顯微鏡圖分析，外加時間長短與方均根粗糙度大小有關，而越大的方均根粗糙度則表示有機吸光層薄膜與電極的接觸面積會增加，使載子可以快速且大量的被電極捕捉形成光電流。因此，藉由外加強度為10000 V/m水平方向電場處理，能夠提升以P3HT:PCBM混摻溶液製作之倒置結構有機高分子太陽能電池的光電轉換效率到達4.16 %，其開路電壓為0.57 V，短路電流為11.9 mA/cm2，填充因子為61.3 %。論文的最後，我們使用台灣大學材料所趙基揚教授團隊提供的PBF低能隙有機高分子材料，應用在倒置結構有機高分子太陽能電池上，並藉由調整有機吸光層混摻比例與預熱溫度，在不同旋塗轉速下找到最佳的製作參數，最後再使用外加電場處理改善元件表現。 | zh_TW |
| dc.description.abstract | Up to the present, silicon crystal solar cells still play the major role in the field of development of photovoltaic devices. However, high production cost of these cells is a major drawback. Polymer solar cells provide an alternative which has the advantages including: easy fabrication, low cost, pervious to light, large area fabrication, and flexibility; therefore, shows a great potential in future development. In this thesis, we will adopt a new method of applying an external electric field to enhance the performance of solar cells. Compared with previous references, this method has an advantage of avoiding damage caused to the electrodes of the device; furthermore, the electric field can be applied in conformity with the polarity direction of the polymer material. We succeeded to increase the device‘s efficiency by applying a horizontal external electric field, which its direction is determined by utilizing a chemical software HyperChem(Hypercube Inc.) to analyze the polarity of the polymer material. Applying a horizontal external electric field has two effects on the surface morphology of the polymer light-absorbing thin film. One is that after the electric field is applied, polymer molecules will be affected because of their polarity; thus, a shift occurs. The main chain of the polymer will align vertically against the polymer light-absorbing thin film surface. Hence, carriers will be able to transfer to their corresponding electrodes efficiently and increase carrier mobility. Second, the shift causes the roughness of the thin film surface to increase. According to the AFM images, the electric field applying time is relevant to the RMS roughness. As the RMS roughness increases, the contact area of the polymer light-absorbing thin film surface and the electrode increases, carriers are then collected quickly and turned into photo current. As a consequence, by applying a horizontal external electric field of magnitude 10000 V/m can increase the PCE of an inverted structured P3HT:PCBM polymer solar cell up to 4.16 %, and it‘s Voc is 0.57 V, Jsc is 11.9 mA/cm2 and FF is 61.3 %. At the end of this thesis, we employed PBF, which is a low band gap material provided by Professor Chao Chi-Yang and his group, on inverted structured polymer solar cells. Optimal parameters were determined by adjusting the mixing ratio of the active layer, preheating temperature, and spin-coat rotational speed. Lastly, the device was improved by applying an electric field. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-08T06:59:01Z (GMT). No. of bitstreams: 1 ntu-100-R98941026-1.pdf: 6640000 bytes, checksum: 6414e4820ec8ab2f419ea121cdf5d7a5 (MD5) Previous issue date: 2011 | en |
| dc.description.tableofcontents | 口試委員審定書 I
摘要 II Abstract III 目錄 V 圖目錄 VII 表目錄 IX 第一章 緒論 1 1.1 前言 1 1.2 太陽能電池的發展 4 1.3 有機太陽能電池的發展 6 1.4 有機高分子太陽能電池運作原理 8 1.4.1 太陽能電池量子效率 10 1.4.2 太陽能電池等效電路分析 11 1.4.3 有機太陽能電池性能指標參數 12 1.5 AM指標參數與太陽光譜 16 1.6 參考資料 18 第二章 有機高分子太陽能電池結構探討 20 2.1 有機高分子簡介 20 2.2 有機高分子太陽能電池結構簡介 23 2.2.1 單層結構 24 2.2.2 雙層異質結構 24 2.2.3 混摻異質接面結構 26 2.2.4 有序混摻異質接面結構 27 2.2.5 傳統結構與倒置結構 28 2.3 參考資料 30 第三章 倒置結構有機高分子太陽能電池製備與量測 34 3.1 實驗材料簡介 34 3.2 元件結構與製備流程 36 3.3 元件量測與分析方法 40 3.3.1 電流密度-電壓特性曲線 40 3.3.2 吸收頻譜曲線 41 3.3.3 原子力顯微鏡 42 3.4 參考資料 43 第四章 外加電場處理修飾高分子薄膜形態 45 4.1 文獻回顧與實驗動機 46 4.2 外加電場處理實驗流程 48 4.3 水平方向與垂直方向電場處理對元件之影響 50 4.3.1 實驗結果與討論 50 4.3.2 化學結構模擬分析 52 4.4 水平方向電場外加強度對薄膜形態之影響 54 4.5 水平方向電場外加時間對元件之影響 58 4.5.1 實驗結果與討論 58 4.5.2 吸收頻譜圖分析 61 4.5.3 原子力顯微鏡圖分析 62 4.6 水平方向電場配合退火處理提升元件效率 64 4.6.1 實驗流程 65 4.6.2 實驗結果與討論 66 4.7 結論 67 4.8 參考資料 68 第五章 低能隙有機高分子應用於倒置結構太陽能電池研究 71 5.1 低能隙有機高分子簡介 71 5.2 元件結構與製備流程 75 5.3 有機吸光層使用不同混摻比例對元件之影響 78 5.4 有機吸光層不同預熱溫度對元件之影響 82 5.5 水平方向與垂直方向電場處理對元件之影響 84 5.6 結論 87 5.7 參考資料 88 第六章 總結 91 6-1 論文回顧 91 6-2 未來展望 93 著作列表 95 | |
| dc.language.iso | zh-TW | |
| dc.subject | 外加電場 | zh_TW |
| dc.subject | 低能隙 | zh_TW |
| dc.subject | 有機高分子太陽能電池 | zh_TW |
| dc.subject | 倒置結構 | zh_TW |
| dc.subject | 表面形態 | zh_TW |
| dc.subject | surface morphology | en |
| dc.subject | organic polymer solar cell | en |
| dc.subject | low band gap | en |
| dc.subject | external electric field | en |
| dc.subject | inverted structure | en |
| dc.title | 有機太陽能電池薄膜形態之修飾與效率提升 | zh_TW |
| dc.title | Modulation of Thin Film Morphology and Efficiency Improvement on Organic Solar Sells | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 99-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 林唯芳(Wei-Fang Su),吳志毅(Chih-I Wu),陳奕君(I-Chun Cheng) | |
| dc.subject.keyword | 有機高分子太陽能電池,倒置結構,表面形態,外加電場,低能隙, | zh_TW |
| dc.subject.keyword | organic polymer solar cell,inverted structure,surface morphology,external electric field,low band gap, | en |
| dc.relation.page | 95 | |
| dc.rights.note | 未授權 | |
| dc.date.accepted | 2011-08-15 | |
| dc.contributor.author-college | 電機資訊學院 | zh_TW |
| dc.contributor.author-dept | 光電工程學研究所 | zh_TW |
| 顯示於系所單位： | 光電工程學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-100-1.pdf 未授權公開取用 | 6.48 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。