請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25803完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 黃漢邦(Han-Pang Huang) | |
| dc.contributor.author | Sio-Fong Ip | en |
| dc.contributor.author | 葉兆豐 | zh_TW |
| dc.date.accessioned | 2021-06-08T06:30:54Z | - |
| dc.date.copyright | 2006-07-28 | |
| dc.date.issued | 2006 | |
| dc.date.submitted | 2006-07-24 | |
| dc.identifier.citation | [1] J. Agnus, P. Nectoux, and N. Chaillet, “Overview of Microgrippers and Design of a Micro-manipulation Station Based on a MMOC Microgripper,” Proceedings of IEEE International Symposium on Computational Intelligence in Robotics and Automation, Espoo, Finland, pp. 117-123, 2005.
[2] F. Arai, A. Kawaji, T. Sugiyama, Y. Onomura, M. Ogawa, T. Fukuda, H. Iwata, and K. Itoigawa, “3D Micromanipulation System under Microscope,” Proceedings of the International Symposium on Micromechatronics and Human Science, Nagoya, Japan, pp. 127-134, 1998. [3] S. S. Bi, G. H. Zong, and W. Zhao, “Micromanipulator System for Bioengineering,” Optics and Precision Engineering, pp. 62-69, 1998. [4] J. M. Breguet, C. Schmitt, and R. Clavel, “Micro/Nanofactory: Concept and State of the Art,” Proceedings of the International Society for Optical Engineering, Boston, United States, Vol. 4194, pp. 1-12, 2000. [5] H. B. Brown, P. M. Muir, A. A. Rizzi, M. C. Sensi, and R. L. Hollis, “A Precision Manipulator Module for Assembly in a Minifactory Environment,” Proceedings of IEEE International Conference on Intelligent Robots and Systems, Maui, Hawaii, Vol. 2, pp. 1030-1035, 2001. [6] A. Burisch, S. Soetebier, and J. Wrege, “Design of a Parallel Hybrid Micro-SCARA Robot for High Precision Assembly,” Micromotion GmbH, 2004. [7] G. Campion, Q. Wang, and V. Hayward, “The Pantograph Mk-II: A Haptic Instrument,” Proceedings of IEEE International Conference on Intelligent Robots and Systems, Alberta, Canada, pp. 193-198, 2005. [8] G. Carbone and M. Ceccarelli, “A Stiffness Analysis for a Hybrid Parallel-serial Manipulator,” Robotica, Vol. 22, No. 5, pp. 567-576, 2004. [9] J. Cecil, D. Vasquez, and D. Powell, “A Review of Gripping and Manipulation Techniques for Micro-assembly Applications,” International Journal of Production Research, Vol. 43, No. 4, pp. 819-828, 2005. [10] D. Chablat and P. Wenger, “Working Modes and Aspects in Fully Parallel Manipulators,” Proceedings of IEEE International Conference on Robotics and Automation, Leuven, Belgium, Vol. 3, pp. 1964-1969, 1998. [11] S. L. Chiu, “Control of Redundant Manipulators for Task Compatibility,” Proceedings of IEEE International Conference on Robotics and Automation, Raleigh, NC, Vol. 4, pp. 1718-1724, 1987. [12] Z. Y. Chu, D. S. Qu, L. N. Sun, and J. Cui, “Research of 2-DOF Planar Parallel High Speed/High Accuracy Robot,” Proceedings of the 5th World Congress on Intelligent Control and Automation, Hangzhou, P. R. China, Vol. 6, pp. 4715-4719, 2004. [13] M. B. Cohn, K. F. Bohringer, J. M. Noworolski, A. Singh, C. G. Keller, K. Y. Goldberg, and R. T. Howe, “Microassembly Technologies for MEMS,” Proceedings of the International Society for Optical Engineering, Santa Clara, California, Vol. 3513, pp. 2-16, 1998. [14] J. Denavit and R.S. Hartenberg, “A Kinematic Notation for Lower Pair Mechanisms Based on Matrices,” ASME Journal of Applied Mechanics, Vol. 77, pp. 215-221. [15] A. Ferreira, C. Cassier, and S. Hirai, “Automatic Microassembly System Assisted by Vision Servoing and Virtual Reality,” IEEE/ASME Transactions on Mechatronics, Vol. 9, No. 2, pp. 321-333, 2004. [16] F. Gao, F. Guy, and W. A. Gruver, “Criteria Based Analysis and Design of Three Degree of Freedom Planar Robotic Manipulators,” Proceedings of IEEE International Conference on Robotics and Automation, Albuquerque, New Mexico, Vol. 1, pp. 468-473, 1997. [17] C. Gosselin, “The Optimum Design of Robotic Manipulators Using Dexterity Indices,” Robotics and Autonomous Systems, Vol. 9, No. 4, pp. 213-226, 1992. [18] C. Gosselin and J. Angeles, “The Optimum Kinematic Design of a Planar Three-Degree-of-Freedom Parallel Manipulator,” Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 110, No. 1, pp. 35-41, 1988. [19] C. Gosselin and J. Angeles, “A Global Performance Index for the Kinematic Optimization of Robotic Manipulators,” Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 113, No. 3, pp. 220-226, 1991. [20] J. Hesselbach, O. Becker, S. Dittrich, and P. Schlaich, “A New Hybrid 4-DOF Robot for Micro-assembly,” Production Engineering, Vol. 9, No. 1, pp. 105-108, 2002. [21] J. Hesselbach and A. Raatz, “Compliant Parallel Robot with 6 DOF,” Proceedings of the International Society for Optical Engineering, Newton, Massachusetts, Vol. 4568, pp. 143-150, 2001. [22] J. Hesselbach, J. Wrege, A. Raatz, and O. Becker, “Aspects on Design of High Precision Parallel Robots,” Assembly Automation, Vol. 24, No. 1, pp. 49-59, 2004. [23] J. W. Hill, D. W. Ploeger, and Y. Gorfu, “Telepresence Microsurgery System,” Proceedings of the International Society for Optical Engineering, San Jose, California, Vol. 3262, pp. 288-295, 1998. [24] R. Hollis and J. Gowdy, “Miniature Factories for Precision Assembly,” Proceedings of International Workshop on Microfactories, Tsukuba, Japan, pp. 9-14, 1998. [25] H. P. Huang and C. P. Liu, “A Novel Trajectory Optimization and Workspace Boundary Singularity Solution for Industrial Robots,” Proceedings of Automation the Eighth International Conference on Automation Technology Conference, Taichung, Taiwan, pp. 1-6, 2005. [26] M. Z. Huang and S. H. Ling, “Kinematics of a class of hybrid robotic mechanisms with parallel and series modules,” Proceedings of IEEE International Conference on Robotics and Automation, San Diego, California, Vol. 3, pp. 2180-2185, 1994. [27] T. Huang, M. Li, Z. X. Li, D. G. Chetwynd, and D. J. Whitehouse, “Optimal Kinematic Design of 2-DOF Parallel Manipulators with Well-Shaped Workpace Bounded by a Specified Conditioning Index,” IEEE Transactions on Robotics and Automation, Vol. 20, No.3, 2004. [28] I. W. Hunter, T. D. Doukoglou, L. A. Jones, P. G. Charette, M. A. Sagar, G. D. Mallinson, and P. J. Hunter, “A Teleoperated Microsurgical Robot and Associated Virtual Environment for Eye Surgery,” Presence, Vol. 2, No. 4, pp. 265-280, 1993. [29] K. A. Jensen, C. P. Lusk, and L. L. Howell, “An XYZ Micromanipulator with three translational degrees of freedom,” Robotica, Vol. 24, pp. 305-314, No.3, 2006. [30] T. Kasaya, H. T. Miyazaki, S. Saito, K. Koyano, T. Yamaura, and T. Sato, “Image-based Autonomous Micromanipulation System for Arrangement of Spheres in a Scanning Electron Microscope,” Review of Scientific Instruments, Vol. 75, No. 6, pp. 2033-2042, 2004. [31] J. O. Kim and P. K. Khosla, “Dexterity Measures for Design and Control of Manipulators,” Proceedings of IEEE/RSJ International Workshop on Intelligent Robots and Systems, Osaka, Japan, Vol. 2, pp. 758-763, 1991. [32] C. A. Klein and B. E. Blaho, “Dexterity Measures for the Design and Control of Kinematically Redundant Manipulators,” International Journal of Robotics Research, Vol. 6, No. 2, pp. 72-83, 1987. [33] A. Kosinka, M. Galicki, and K. Kedzior, “Designing and optimization of parameters of Delta-4 parallel manipulator for a given workspace,” Journal of Robotic Systems, Vol. 20, No. 9, pp. 539-548, 2003. [34] D. S. Kwon, K. Y. Woo, S. K. Song, W. S. Kim, and H. S. Cho, “Microsurgical Telerobot System,” Proceedings of IEEE International Conference on Intelligent Robots and Systems, Vol. 2, pp. 945-950, 1998. [35] W. H. Lan,, “Development of a Micro-Positioning Stage for Cell Manipulation,” Master Dissertation, Department of Mechanical Engineering, National Taiwan University, 2003. [36] M. Y. Lee, A. G. Erdman, and Y. Gutman, “Applications of Kinematic/Kinetic Performance Tools in Synthesis of Multi-DOF Mechanisms,” Transactions of the ASME Journal of Mechanical Design, Vol. 116, No. 2, pp. 452-461, 1994. [37] S. J. Lee, K. H. Kim, D. H. Kim, J. O. Park, and G. T. Park, “Recognizing and Tracking of 3D-shaped Micro Parts Using Multiple Visions for Micromanipulation,” Proceedings of International Symposium on Micromechatronics and Human Science, Nagoya, pp. 203-210, 2001. [38] C.S. Lin, P. R. Chang, and J. Y. S. Luh, “Formulation and Optimization of Cubic Polynomial Joint Trajectories for Industrial Robots,” IEEE Transactions on Automatic Control, Vol. AC-28, No. 12, pp. 1066-1074, 1983. [39] X. J. Liu, J. I. Jeong, and J. W. Kim, “A Three Translational Dofs Parallel Cube-Manipulator,” Robotica, Vol. 21, No. 6, pp. 645-653, 2003. [40] Y. J. Lou, G. F. Liu, J. J. Xu, and Z. X. Li, “A General Approach for Optimal Kinematic Design of Parallel Manipulators,” Proceedings of IEEE International Conference on Robotics and Automation, New Orleans, LA, Vol. 4, pp. 3659-3664, 2004. [41] H. Maekawa and K. Komoriya, “Development of A Micro Transfer Arm for A Microfactory,” Proceedings of IEEE International Conference on Robotics and Automation, Seoul, Korea, Vol.2, pp. 1444-1451, 2001. [42] J-P. Merlet, “An Improved Design Algorithm Based on Interval Analysis for Spatial Parallel Manipulator with Specified Workspace,” Proceedings of IEEE International Conference on Robotics and Automation, Seoul, Korea, Vol. 2, pp. 1289-1294, 2001. [43] Y. Okazaki, N. Mishima, and K. Ashida, “Microfactory—Concept, History, and Developments,” Journal of Manufacturing Science and Engineering, Vol. 126, No. 4, pp. 837-844, 2004. [44] F. C. Park and J. W. Kim, “Manipulability of Closed Kinematic Chains,” Journal of Mechanical Design, Transactions of the ASME, Vol. 120, No. 4, pp. 542-548, 1998. [45] H. H. Pham, H. C. Yeh, and I. M. Chen, “Micromanipulation system design based on selective actuation mechanisms,” International Journal of Robotics Research, Vol. 25, No. 2, pp. 171-186, 2006. [46] D. O. Popa and H. E. Stephanou, “Micro and Mesoscale Robotic Assembly” Journal of Manufacturing Processes, Vol. 6, No. 1, pp. 52-71, 2004. [47] A. E. Quaid and R.L. Hollis, “Cooperative 2-DOF Robots for Precision Assembly,” Proceedings of IEEE Intl. Conf. on Robotics and Automation, Minneapolis, Minnesota, Vol. 3, pp. 2188-2193, 1996. [48] J. K. Salisbury and J. J. Craig, “Articulated Hands- Force Control and Kinematic Issues,” International Journal of Robotics Research, Vol. 1, No. 1, pp.4-17, 1982. [49] T. Sato, T. Kameya, H. Miyazaki, and Y. Hatamura, “Hand-Eye System in Nano Manipulation World,” Proceedings of IEEE International Conference on Robotics and Automation, Nagoya, Vol.1, pp. 59-66, 1995. [50] L. Stocco, S. E. Salcudean, and F. Sassani, “Fast Constrained Global Minimax Optimization of Robot Parameters,” Robotica, Vol. 16, No. 6, pp. 595-605, 1998. [51] T. Tanikawa and T. Arai, “Development of Micro Manipulation System Having a Two-Fingered Micro-Hand,” IEEE Transactions on Robotics and Automation, Vol. 15, No.1, pp. 152-162, 1999. [52] T. Tanikawa, T. Arai, and Y. Hashimoto, “Development of Vision System for Two-Fingered Micro Manipulation,” Proceedings of IEEE International Conference on Intelligent Robots and Systems, Grenoble, Vol. 2, pp. 1051-1056, 1997. [53] T. Tanikawa, M. Kawai, N. Koyachi, T. Arai, T. Ide, S. Kaneko, R. Ohta, and T. Hirose, “Force Control System for Autonomous Micro Manipulation,” Proceedings of IEEE International Conference on Robotics and Automation, Seoul, Korea, Vol. 1, pp. 610-615, 2001. [54] L. W. Tsai, Robot Analysis: The Mechanics of Serial and Parallel Manipulators, 1st Edition, New York: John Wiley &Sons Inc., pp.19-29, 1999. [55] K. M. Tse and C. H. Wang, “Evolutionary optimization of cubic polynomial joint trajectories for industrial robots,” Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, Vol.4, pp. 3272-3276, 1998. [56] J. G. Wang and C. Gosselin, “A New Approach for the Dynamics Analysis of Parallel Manipulators,” Multibody System Dynamics, Vol. 2, No. 3, pp.317-334, 1998. [57] J. G. Wang, C. Gosselin, and L. Cheng, “Modeling and Simulation of Robotic Systems with Closed Kinematic Chains Using the Virtual Spring Approach,” Multibody System Dynamics, Vol. 7, No. 2, pp. 145-170, 2002. [58] X. Z. Wu, Y. L. Wu, and S. Y. Li, “A Parallel Manipulator for Micro Assembly and Machining,” Proceedings of the International Society for Optical Engineering, Nanjing, China, Vol. 4601, pp. 328-333, 2001. [59] H. Yamamoto and T. Sano, “Study of Micromanipulation Using Stereoscopic Microscope,” IEEE Transactions on Instrumentation and Measurement, Vol. 51, No. 2, pp. 182-187, 2002. [60] H. Yamamoto, T. Sano, and S. Hasebe, “Automatic Microinjection System Using Stereoscopic Microscope,” IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, Crimea, Ukraine, pp. 83-86, 2001. [61] G. Yang, J. A. Gaines, and B. J. Nelson, “A Flexible Experimental Workcell for Efficient and Reliable Wafer-level 3D Micro-assembly,” Proceedings of IEEE International Conference on Robotics and Automation, Seoul, Korea, Vol. 1, pp. 133-138, 2001. [62] Y. K. Yiu, H. Cheng, Z. H. Xiong, G. F. Liu, and Z. X. Li, “On the Dynamics of Parallel Manipulators,” Proceedings of IEEE International Conference on Robotics and Automation, Seoul, Korea, Vol. 4, pp. 3766-3771, 2001. [63] T. Yoshikawa, “Analysis and Control of Robot Manipulators with redundancy,” Robotics Research: The 1st International Symposium, Bretton Woods, NH, pp. 735-747, 1984. [64] S. Yu and B. J. Nelson, “Microrobotic Cell Injection,” Proceedings of IEEE International Conference on Robotics and Automation, Seoul, Korea, Vol. 1, pp. 620-625, 2001. [65] T. Zhu and D. L. Tan, “Research on Micro Manipulating Robotics System and Its Key Technology,” Modular Machine Tool and Automatic Manufacturing Technique, No. 11, pp. 33-36, 2001. [66] http://cp.literature.agilent.com/litweb/pdf/5988-5895EN.pdf [67] http://www.awce.com/pom.htm [68] http://www.atmel.com/dyn/resources/prod_documents/DOC2324.pdf [69] http://www.atmel.com/dyn/resources/prod_documents/DOC3023.pdf | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25803 | - |
| dc.description.abstract | 本文之主要目的，是設計與控制一具有四個自由度之微操作機械手臂，以適用於微米等級應用如微組裝及微注射。為達到高解析度、工作空間大、體積小的目的，本文提出一兼具傳統串聯及並聯式機構優點之並聯混合式機構。相對於傳統機械手臂，此微操作機械手臂的所佔空間較少，適合操作於微型工廠。
在設計方面，主要分為運動設計及機構設計。運動設計的目的在於求得符合需求的桿件長度，機構設計則主要考量機構之干涉、變形及組裝困難以設計出一實體機構。此外並利用電腦輔助工程設計軟體來模擬致動器所需的轉速及扭力，以作為選擇驅動元件的準則。本文亦推導及驗證微操作機械手臂之順向、逆向的運動學及動力學，並應用於機械手臂的運動規劃及控制上。 透過個人電腦、數位訊號處理器及可程式邏輯閘的整合，以實現微操作機械手臂之多軸控制。此外並完成馬達驅動器電路的設計與製作。實驗結果顯示此微操作機械手臂適用於微米等級操作之應用。 | zh_TW |
| dc.description.abstract | This thesis presents the development of a micromanipulator for micro-scale manipulation tasks such as microassembly and cell injection. The design of the micromanipulator is based on task requirements. The micromanipulator provides four degrees of freedom (DOFs) for dexterous motion. To achieve high resolution, large workspace and compact structure, a hybrid configuration which is a combination of a parallel selectively compliant assembly robot arm (SCARA) configuration and a serial mechanism was proposed. Due to its compact size, the micromanipulator can operate in a microfactory. In kinematic design, a novel method was proposed to select kinematic parameters so that the prescribed workspace can be achieved. To determine a unique set of kinematic parameters, kinematic performance indices were also introduced. Analyses of required angular velocity and torque of each actuated joint for a typical task were performed and used as a criterion for selection of actuating components. Based on the mechanical design, kinematics and dynamics in both forward and inverse cases were derived and verified.
Trajectory planning based on modified tension spline (MTS) was performed for tracking of a desired Cartesian path. Digital signal processor (DSP) and field programmable gate array (FPGA) were employed to implement the multi-joint control of the micromanipulator. Driver modules were also developed. Finally, a prototype of the micromanipulator was fabricated. Experimental results demonstrate the feasibility of the proposed system in micromanipulation. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-08T06:30:54Z (GMT). No. of bitstreams: 1 ntu-95-R93522811-1.pdf: 2855872 bytes, checksum: d9895e70286b43478dd089800b8f2f39 (MD5) Previous issue date: 2006 | en |
| dc.description.tableofcontents | List of Tables v
List of Figures vi Chapter 1 Introduction 1 1.1 Motivation 1 1.2 Related Works 4 1.2.1 Literature Survey of Micromanipulation Systems 4 1.2.2 Literature Survey of High Precision Manipulators 5 1.3 Overview of the Thesis 8 1.4 Contributions 9 Chapter 2 Mechanical Design of the Micromanipulator 11 2.1 Task Requirements 12 2.2 Kinematic Configuration 14 2.3 Dexterity Measures of Manipulators 16 2.3.1 Introduction 16 2.3.2 Jacobian Matrix 17 2.3.3 Condition number 17 2.3.4 Manipulability 18 2.3.5 Isotropy 21 2.4 Kinematic Design 22 2.4.1 Determine Parameters by Prescribed Workspace 23 2.4.2 Determine Parameters by Performance Indices 25 2.5 Detailed Mechanical Design 30 2.5.1 Mechanical Structure of Base 31 2.5.2 Linear Stage 32 2.5.3 Mechanical Structure of 3-DOF Planar Mechanism 34 2.6 Arrangement of Photomicrosensors 42 2.6.1 Initialization 42 2.6.2 Protection 44 2.7 Motor Selection 46 2.7.1 Analysis of Required Angular Velocities 47 2.7.2 Analysis of Required Torques 49 2.7.3 Specifications of Selected Actuators 52 2.8 Deformation Analysis 53 2.9 Fabrication of the Micromanipulator 55 Chapter 3 Kinematics and Dynamics of the Micromanipulator 56 3.1 Forward Kinematics 56 3.2 Inverse Kinematics 61 3.3 Differential Kinematics 62 3.4 Evaluation of Workspace and Resolution 63 3.4.1 Workspace 63 3.4.2 Resolution 64 3.5 Forward Dynamics 67 3.6 Inverse Dynamics 75 3.7 Verification of Dynamic Model 77 3.7.1 Verification of Forward Dynamic Model 77 3.7.2 Verification of Inverse Dynamic Model 79 Chapter 4 Trajectory Planning and Control of the Micromanipulator 81 4.1 Trajectory Planning 81 4.1.1 Modified Tension Spline 82 4.1.2 Trajectory Planning of the Micromanipulator 85 4.2 Controller Design 89 4.2.1 Transfer Function of a Single Joint 89 4.2.2 Position Controller 93 4.3 Control System of the Micromanipulator 97 4.3.1 Central Control Module 98 4.3.2 Interface Module 99 4.3.3 Driver Module 106 Chapter 5 Simulation and Experiments 110 5.1 Simulation 110 5.2 Experiments on Position Control 114 5.3 Microgripper 117 5.4 Integration of the Micromanipulator with the Microgripper 118 Chapter 6 Conclusions 119 6.1 Conclusions 119 6.2 Future Works 120 References 121 | |
| dc.language.iso | en | |
| dc.subject | 定位控制 | zh_TW |
| dc.subject | 微操作 | zh_TW |
| dc.subject | 混合式機械手臂 | zh_TW |
| dc.subject | 機構設計 | zh_TW |
| dc.subject | 運動學 | zh_TW |
| dc.subject | 動力學 | zh_TW |
| dc.subject | 軌跡規劃 | zh_TW |
| dc.subject | micromanipulation | en |
| dc.subject | position control | en |
| dc.subject | trajectory planning | en |
| dc.subject | dynamics | en |
| dc.subject | kinematics | en |
| dc.subject | mechanical design | en |
| dc.subject | hybrid manipulator | en |
| dc.title | 多軸微操作機械手臂之研製 | zh_TW |
| dc.title | Development of a Micromanipulator with Multiple Degrees of Freedom | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 94-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 謝成(Chen Hsieh),蔡坤諭(Kuen-Yu Tsai) | |
| dc.subject.keyword | 微操作,混合式機械手臂,機構設計,運動學,動力學,軌跡規劃,定位控制, | zh_TW |
| dc.subject.keyword | micromanipulation,hybrid manipulator,mechanical design,kinematics,dynamics,trajectory planning,position control, | en |
| dc.relation.page | 126 | |
| dc.rights.note | 未授權 | |
| dc.date.accepted | 2006-07-26 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
| 顯示於系所單位： | 機械工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-95-1.pdf 未授權公開取用 | 2.79 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。