請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25779
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 蔡坤諭 | |
dc.contributor.author | Hau-Tzung Wang | en |
dc.contributor.author | 王豪綜 | zh_TW |
dc.date.accessioned | 2021-06-08T06:29:38Z | - |
dc.date.copyright | 2006-07-28 | |
dc.date.issued | 2006 | |
dc.date.submitted | 2006-07-26 | |
dc.identifier.citation | [1] C. Dorlemann, P. Muβ, M. Schugt, R. Uhlenbrock, “New High Speed Current Controlled Amplifier For PZT Multilayer Stack Actuator,” ScienLab electronic systems GmbH, Bochum, Germany.
[2] Fleming's left hand rule available at http://www.answers.com/topic/fleming-s-left-hand-rule [3] Art Dudley, Stereophile, Jan. 2005. Available at http://www.stereophile.com/artdudleylistening/105listening [4] Kenji Uchino and Jayne R. Giniewicz, Micromechatronics, Copyright © 2003 by Marcel Dekker, Inc. All Rights Reserved. [5] David B. Weems, Designing, Building, and Testing Your Own Speaker System, pp. 2. [6] P.G.L. Mills and M.O.J. Hawksford, “Distortion Reduction in Moving-Coil Loudspeaker Systems Using Current-Drive Technology,” University of Essex, Wivenhoe Park, Colchester, Essex, C04 3SQ, UK. [7] National Semiconductor website http://www.national.com [8] LM12 Power Operational Amplifier Specification: http://www.national.com/an/AN/AN-446.pdf [9] LM675 Power Operational Amplifier, National Semiconductor http://www.national.com/pf/LM/LM675.html [10] Hendrik W. Bode, Network Analysis and Feedback Amplifier Design, Research Mathematician, Bell Telephone Laboratories, Inc, 1957. [11] Gene F. Franklin, J. David Powell, Abbas Emami-Naeini, Feedback Control of Dynamic Systems, Foutth Edith, © 2002 by Prentice Hall. [12] Sergio Franco, Design with Operational Amplifiers and Analog Integrated Circuit, Third Edition, Published by Tata McGraw-Hill, 2002. [13] E.J.Kennedy, Operational Amplifier Circuits Theory and Applications, Copyright © 1988 by Holt, Rinehart and Winston, Inc. [14] Adel S. Sedra, Kenneth C. Smith, Microelectronic Circuits, Fourth Edition, Copyrighy ©1998 by Oxford University Press, Inc. [15] Ramakant A. Gayakwad, Op-Amps and Linear Intergarated Circuits, © 1993 by Regents/Prentice Hall. [16] Intersil Application Note, “Current Feedback Amplifier Theory and Applications”, April 1995. [17] Intersil Application Note, “Converting from Voltage-feedback to Current-Feedback Amplifier”, April 1999. [18] Gene F. Franklin, J. David Powell, Michael Workman, Digital Control of Dynamic Systems, Third Edith, © 1998 by Addison Wesley Longman, Inc. [19] Martin Colloms, High Perfromance Loudspeaker, Fifth Edition, Copyright © 1997 West Sussex PO19 1UD, England. [20] David B. Weems, G. R. Koonce, Great Sound Stereo Speaker Manual, Second Edition, copyright © 2000 by the McGraw-Hill Companies, Inc. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/25779 | - |
dc.description.abstract | 由於奈米級電子元件的發展,對於精確度的需求已從微米級進階至奈米級。在奈米級定位的應用方面,層積壓電致動器(PZT)則經常地被使用,但由於壓電致動器本身的高電容效應使其在驅動時產生許多困難,因此壓電致動器之驅動電路設計即成為一項重要課題。另一方面,音圈馬達(VCM)不僅被廣泛地使用在精密控制中也經常地應用在消費性電子產品,如音響系統,所以適當的放大器電路是不可或缺的。傳統上來講,電壓回饋放大器(VFA)是最常被用來驅動壓電致動器以及音圈馬達的放大器類型。然而,眾所皆知地,利用電壓回饋放大器來驅動壓電致動器會產生磁滯(Hysteresis)非線性效應。除此之外,音圈馬達方面的應用,則由於音圈本身的電感效應而難以提高整個系統的頻寬。根據許多文獻,利用電流來驅動致動器的方式擁有許多優點,因此我們將藉由電流回饋類型的放大器來消除以上所敘述的非線性效應等。
我們預期利用電流回饋放大器系統來驅動致動器這個構想,將適用於精密閉迴路控制的應用以期減低系統的非線性現象。與古典的電壓回饋類型驅動電路不同的是,電流驅動電路將可控制在壓電致動器中累積的電荷,控制電荷的模式相對於電壓驅動電路的優點如下:致動器移動的線性化、增加致動器的剛性以及改善致動器在高頻動態操作時的可靠度。另一方面,由佛萊明(Fleming)左手定則可得知音圈所受之推動力是由通過音圈的電流與週遭磁場的交互作用直接產生,因此我們預期利用電流回饋放大器來驅動音圈馬達系統將可大大地改善其響應。更進一步,目前針對電壓回饋放大器與電流回饋放大器應用在壓電致動器及音圈馬達系統來說,這類類比回饋放大器的設計並沒有直接且有效率的設計方法,而是必須經過不斷的嘗試。本論文將著重於如何利用回饋控制理論來有系統地設計與分析類比驅動電路。首先我們將利用一顆市面上的功率運算放大器分別接成電壓回饋以及電流回饋電路兩種不同的類型,並且包括負載(壓電致動器或音圈馬達),我們將驅動電路與負載視為整個系統,接著針對此系統根據模擬與實驗作分析與比較,在實驗方面我們首先採取電路在麵包板上的設計與測試。特別針對電流回饋放大器,我們將利用控制理論來模擬與設計電流回饋電路達到系統所需要的規格。 | zh_TW |
dc.description.abstract | Due to the development of nano-electronic devices, a requirement of precision changes from micrometer to nanometer grade. For nano-positioning applications, piezoelectric (PZT) multilayer stack actuators are often used. It is difficult to drive PZT actuators due to high capacitance effects and it is a hot topic in nanotechnology. On the other hand, voice-coil motors (VCM’s) are also widely used for not only precision control but also many consumer applications such as audio systems. Therefore, a proper VCM driving circuit is also essential. Conventionally, voltage feedback amplifiers (VFA’s) are used to drive most PZT and VCM actuators. However, it is known that with voltage feedback amplifier, PZT possesses hysteretic nonlinearities, and it is difficult to increase the bandwidth of VCM due to inductance effects. By using current feedback amplifiers (CFA’s), these effects may be eliminated.
It is expected that a CFA-PZT system is well suitable for applications of precision closed-loop control to reduced nonlinearities. Unlike classical voltage driving circuits, current driving circuits allow controlling piezoelectric actuators via electrical charges. This charge-control mode has several benefits compared to classical voltage-control such as a linearization of motion, increment of actuator stiffness and drastic improvement of actuator reliability when submitted to stringent dynamical operating conditions. It is also expected that using a CFA may significantly improve the performance of the VCM system, since the produced force on the voice-coil is an interaction between the current flowing through the wire and the surrounding magnetic field according to Fleming’s left hand. Furthermore, currently for both VFA’s and CFA’s, the design of analog feedback amplifiers is not straight-forward, and it requires several heuristic techniques and iterative attempts. The focus of this thesis is to systematically design and analyze an analog drive circuit using feedback control theories. Firstly, an existing power operational amplifier is utilized and performed as amplifier circuits with voltage feedback and current feedback topologies individually. The performances of topologies coupled with the load (PZT or VCM) will be analyzed and compared by simulations and experiments. Discrete-component amplifier circuits will be designed and tested first. Particularly, CFA’s will be heuristically redesigned to meet the system requirements of applications. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T06:29:38Z (GMT). No. of bitstreams: 1 ntu-95-R93921073-1.pdf: 1772333 bytes, checksum: e46f1c8dce6703332d184af8ba99312c (MD5) Previous issue date: 2006 | en |
dc.description.tableofcontents | Abstract I
中文摘要 III Statement of General Contributions IV Statement of Original Contributions IV Acknowledgement V 中文致謝 VI Table of Contents VII List of Illustrations X Chapter 1. Introduction 1 1.1 Motivation 1 1.2 Overview of the Thesis 2 Chapter 2. Actuator Control System 3 2.1 Introduction to Piezoelectric Actuators (PZT) 3 2.1.1 Principles of PZT 3 2.1.2 The Reason CFA has Advantages over VFA in PZT applications 5 2.2 Introduction to Voice Coil Motor (VCM) 6 2.2.1 Principles of VCM 6 2.2.2 The Reason CFA has Advantages over VFA in VCM applications 8 2.3 Overview of the Actuator Control System 10 PART A 12 Chapter 3. Verification of PZT Hysteresis Phenomena 12 3.1 Current Source Circuit 12 3.2 Pspice Simulation of Howland Circuit (ideal current source) 17 3.3 Implementation of Ideal Current Source with Op-amp LM675 18 3.3.1 Find an Appropriate Operational Amplifier to Use 18 3.3.2 Circuit Implementation 19 3.4 Verification of PZT 21 PART B 26 Chapter 4. Operational Amplifier and Circuit Analysis 26 4.1 Background 26 4.2 Introduction to Operational Amplifier (Op-amp) 27 4.2.1 Ideal Op-amp 27 4.2.2 Non-ideal Op-amp 28 4.3 Introduction of Feedback Topologies 29 4.3.1 Closed-loop Voltage Gain 32 4.3.2 Input Resistance with Feedback 34 4.3.3 Output Resistance with Feedback 35 4.3.4 Bandwidth with Feedback 36 4.4 Design Flow Chart of Feedback Amplifier 37 4.5 Voltage Feedback Amplifier (VFA) 38 4.6 Current Feedback Amplifier (CFA) 41 4.7 System Identification of Loudspeaker Impedance Model 43 Chapter 5. Simulations and Experiments of CFA and VFA 45 5.1 ORCAD Pspice and Matlab Simulations 45 5.1.1 Identify the LM675 Model from Pspice 45 5.1.2 System Identification of the Loudspeaker Model by Experiment 48 5.1.3 VFA System in Matlab 50 5.1.4 CFA System in Matlab 51 5.1.5 Sensitivity Prediction 52 5.2 Experiments of Circuits 54 5.2.1 Identify the LM675 Model from Experiment 54 5.2.2 Implementation of VFA System 58 5.2.3 Implementation of CFA System 60 5.2.4 Comparisons of Simulations and Experiments 63 Chapter 6. Conclusions and Future Work 67 6.1 Conclusions 67 6.2 Future Work 67 References 68 | |
dc.language.iso | en | |
dc.title | 利用回饋控制理論於電流回饋功率放大器之設計與應用 | zh_TW |
dc.title | DESIGN AND APPLICATION OF CURRENT-FEEDBACK POWER AMPLIFIER
BASED ON FEEDBACK CONTROL THEORIES | en |
dc.type | Thesis | |
dc.date.schoolyear | 94-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 陳永耀 | |
dc.contributor.oralexamcommittee | 顏家鈺,盧奕璋 | |
dc.subject.keyword | 壓電致動器,音圈馬達,電壓回饋放大器,電流回饋放大器,回饋控制, | zh_TW |
dc.subject.keyword | piezoelectric actuator (PZT),voice-coil motor (VCM),voltage-feedback amplifier (VFA),current-feedback amplifier (CFA),feedback theory, | en |
dc.relation.page | 69 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2006-07-26 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電機工程學研究所 | zh_TW |
顯示於系所單位: | 電機工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 1.73 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。