請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/2330
標題: | 高強度鋼筋混凝土開孔剪力牆裂縫控制之研究 Study on Crack Width Control of High-Strength Reinforced Concrete Wall with Openings |
作者: | Yi-Chien Wu 吳怡謙 |
指導教授: | 黃世建(Shyh-Jiann Hwang) |
關鍵字: | 高強度鋼筋混凝土,開孔剪力牆,裂縫控制,性能評估, high-strength reinforced concrete,shear walls with openings,crack width control,performance evaluation, |
出版年 : | 2017 |
學位: | 碩士 |
摘要: | 本研究的主題為鋼筋混凝土剪力牆的試驗與分析,試驗目的為比較不同強度材料及相異開口型式之剪力牆的反覆載重行為及裂縫控制研究,因此設計了尺寸、配筋相同的四座剪力牆試體:普通強度未開孔牆、高強度未開孔牆與普通強度開孔牆、以及高強度開孔牆。在實驗後針對彼此的觀測結果互相對比,並以歐洲共同規範CEB-FIP[9]之裂縫模型結合軟化壓拉桿[6,7]建立本研究之尖峰裂縫模型,再以本實驗所歸納的尖峰裂縫與殘餘裂縫寬度比例曲線,將所預測之尖峰裂縫轉為預測殘餘裂縫寬。最後,將殘餘裂縫寬分析值與實驗值以日本建築協會AIJ 2004[10]及AIJ 2010[11]的相關規範做性能評估,並針對評估結果作討論。 The main purpose of this research is about experimental and analysis study of Reinforced Concrete shear wall. The objective of the test is to compare the cyclic loading behavior and the crack width control. The parameters include different strength of materials and openings. This research design four RC wall specimens, normal-strength RC shear wall, high-strength RC shear wall, normal-strength RC shear wall with an opening and the last one is high-strength RC shear wall with an opening. We discuss the observations of the tests, establish a model to predict the peak crack width by combining the concepts of CEB-FIP[9] and Softened Strut-and-Tie model[6,7]. Than we modify the peak crack width to the residual crack width by using experimentally observed ratio between these two widths of this research. Moreover, we evaluate our value of proposed method and experimental data by perspectives the code of Architectural Institute of Japan, AIJ 2004[10] and AIJ 2010[11]. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/2330 |
DOI: | 10.6342/NTU201703299 |
全文授權: | 同意授權(全球公開) |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-1.pdf | 13.14 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。