請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22029
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳國慶(KUO-CHING CHEN) | |
dc.contributor.author | YU-WEI HONG | en |
dc.contributor.author | 洪鈺葳 | zh_TW |
dc.date.accessioned | 2021-06-08T03:58:43Z | - |
dc.date.copyright | 2018-08-13 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-08-10 | |
dc.identifier.citation | [1] D. Ren, X. Feng, An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery, Journal of Power Sources, 364, Page: 328-340, 2017
[2] K. Nishikawa, T. Mori, Li dendrite growth and Li ionic mass transfer phenomenon, Journal of Electroanalytical Chemistry, 661, Page: 84-89, 2011 [3] B. Wu, J. Lochala, The interplay between solid electrolyte interface (SEI) and dendritic lithium growth, 40, Page: 34-41, 2017 [4] M.H. Yang, D. Belov, Investigation of the kinetic mechanism in overcharge process for Li-ion battery, solid state ionics, 179, Page: 1816-1821, 2008 [5] M. Dubarry, B.Y. Liaw, Cell-balancing currents in parallel strings of a battery system, Journal of Power Sources, 321, Page: 36-46, 2016 [6] L. Lin, N. Kawarabayashi, A practical and Accurate SOC Estimation System for Lithium-ion Batteries by EKF, IEEE, Page: 27-31, 2015 [7] N. Yang, X. Zhang, Unbalanced discharging and aging due to temperature differences among the cells in a lithium-ion battery pack with parallel combination, Journal of Power Sources, 306, Page: 733-741, 2016 [8] M. Ouyang, D. Ren, Overcharge-induced capacity fading analysis for large format lithium-ion batteries with LiyNi1/3Co1/3Mn1/3O2 t LiyMn2O4 composite cathode, Journal of Power Sources, 279, Page: 626-635, 2015 [9] N. Sharma, V.K. Peterson, Overcharging a lithium-ion battery: effect on the LixC6 negative electrode determined by in situ neutron diffraction, Journal of Power Sources, 244, page: 1-7, 2012 [10] T. Ohsaki, T. Kishi, T. Kuboki, N. Takami, N. Shimura, Y. Sato, et al., Overcharge reaction of lithium-ion batteries, Journal of Power Sources, 146, Page: 97-100, 2005 [11] H.G. Schweiger, Comparison of several methods for determining the internal resistance of lithium ion cells, Sensors(Vasel), 10, page: 5604-5625, 2010 [12] S. Erol, M.E. Orazem, Influence of overcharge and over-discharge on the impedance response of LiCoO2jC batteries, Journal of Power Sources, 270, Page: 92-100, 2014 [13] K. Takahashi, H. Maekawa, Effects of intermediate layer on interfacial resistance for all-solid-state lithium batteries using lithium borohydride, Solid State Ionics, 262, page: 179-182, 2014 [14] 蔡慶鴻, 鋰離子電池老化特性和開路電壓簡易估算法與並聯行為之解析, 國立台灣大學工學院應用力學研究所碩士論文, 2017 [15] 張岑安, 全固態鋰電池之彎折分析, 國立台灣大學工學院應用力學研究所碩士論文, 2017 [16] S. Kim, M. Kim, Quercetin as electrolyte additive for LiNi0.5Mn1.5O4 cathode for lithium-ion secondary battery at elevated temperature, Journal of Power Source, 336, page:316-324, 2016. [17] Y.X. Ren, T.S. Zhao, A stabilized high-energy Li-polyiodide semi-liquid battery with a dually-protected Li anode, Journal of Power Source, 347, page: 136-144, 2017. [18] C. Li, T. Shi, A flexible high-energy lithium-ion battery with a carbon black-sandwiched Si anode, Electrochimica Acta, 225, page: 11-18, 2017. [19] A.J. Bard, L.R. Faulkner, Elecrtochemical Methods Fundamentals And Applications, 2001 [20] 胡啟章, 電化學原理與方法, 2011 [21] W. Song, M. Chen, Non-uniform effect on the thermal/aging performance of Lithium-ion pouch battery, Applied Thermal Engineering, 128, Page: 1165-1174, 2018 [22] S.F. Schuster , T. Bach, Nonlinear aging characteristics of lithium-ion cells under different operational conditions, Journal of Energy Storage, 1, Page: 44-53, 2015 [23] F. Richter, S. Kjelstrup, Measurements of ageing and thermal conductivity in a secondary NMC-hard carbon Li-ion battery and the impact on internal temperature profiles, Electrochimica Acta, 250, Page: 228-237, 2017 [24] S. D. Fabre, D. Guy-Bouyssou, Charge/Discharge Simulation of an All-Solid-State Thin-Film Battery Using a One-Dimensional Model, Journal of Electrochemical Society, 159(2), Page: 104-115, 2012 [25] R.D. Perkins, A.V. Randall, Controls oriented reduced order modeling of lithium deposition on overcharge, Journal of Power Source, 209, Page: 318-325, 2012 [26] Y. Aizawa, K. Yamamoto, In situ electron holography of electric potentials inside a solid-state electrolyte: Effect of electric-field leakage, Ultramicroscopy, 178, Page: 20-26, 2017 [27] 張建邦, 快速電化學法估算純電動車之電池組狀態, 台灣大學應用力學所碩士論文, 2016 [28] P. Ramadass, B. Haran, Mathematical modeling of the capacity fade of Li-ion cells, Journal of Power Sources, 123, Page: 230-240, 2003 [29] N. Kuwata, X. Lu, Lithium diffusion coefficient in amorphous lithium phosphate thin films measured by secondary ion mass spectroscopy with isotope exchange methods, Solid State Ionics, 294, Page: 59-66, 2016 [30] S. Pramanik, S. Anwar, Electrochemical model based charge optimization for lithium-ion batteries, Journal of Power Sources, 313, Page: 164-177, 2016 [31] S. Larfaillou, D. Guy-Bouyssou, Comprehensive characterization of all-solid-state thin films commercial microbatteries by Electrochemical Impedance Spectroscopy, Journal of Power Sources, 319, Page: 139-146, 2016 [32] X. Yu, J.B. Bates, A Stable Thin-Film Lithium Electrolyte Lithium Phosphorus Oxynitride, Journal of Electrochemical Society, 144, Page: 524-532, 1997 [33] S. Erol , M.E. Orazem, Influence of overcharge and over-discharge on the impedance response of LiCoO2/C batteries, Journal of Power Sources, 270, Page: 92-100, 2014 [34] Z. Yang, W. Yang, Enhanced overcharge behavior and thermal stability of commercial LiCoO2 by coating with a novel material, Electrochemistry Communications, 10, Page: 1136-1139, 2008 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22029 | - |
dc.description.abstract | 在本論文中,我們將全固態電池以定電流充電的方式,使電池過充至不同程度,透過所量測的溫度曲線可發現,電池在大幅度過充時,其表面溫度仍只高於環境溫度2-3℃。又透過分析固態電池在過充時,其內阻的變化可以發現,內阻成長可分為內阻緩慢成長期和內阻激增期等兩部分。比較電池在飽電狀態、內阻緩慢成長期和內阻激增期等三種狀態下,電池老化速度的差異性我們發現,電池在觸發不可逆反應後,確實有著老化速度大增的現象。雖然電池再內阻緩慢成長區間中進行循環時,電池老化速度明顯較飽電狀態下來的迅速,但這可能是因為目前的固態電池生產品質並不穩定,又或是充入電量太多使得電極在膨脹和收縮的過程中,產生不可逆的機械性破壞,進而導致電極內部活性材料減少的緣故。雖然固態電池在小幅度過充後,仍然會使電池老化速度加速,但老化速度地增加卻可以使每一次循環的使用時間延長,這不僅可以讓生產方滿意亦可滿足消費者的需求。 | zh_TW |
dc.description.abstract | In this thesis, we use the method of constant-current charging to make the all-solid-state battery overcharge to different degrees. It is found that surface temperature of the battery is only 2-3°C higher than ambient temperature when the battery is highly overcharged by the measured temperature curve. By analyzing the change of the internal resistance of the all-solid-state battery, it is found that the internal resistance can be divided into two parts, which are slow and fast-growing period by analyzing the change of the internal resistance when the all-solid-state battery is overcharged. Comparing the differences of the battery aging speed in the state of full charge, internal resistance slow growth and internal resistance swift growth, we found that the battery aging speed is indeed increasing after triggering the irreversible reaction. Although the battery aging speed is obviously faster than the state of full charge when the battery is cycling in the slow resistance growth interval. It may be since the current production quality of all-solid-state battery is not stable, or the charge quantity is too much that causes irreversible mechanical damage occurs during the expansion and contraction and it leads to a decrease in the active material inside the electrode. Although the all-solid-state battery will accelerate the aging rate of the battery after a small overcharge, the aging speed can increase the usage time of each cycle, which satisfies not only the production side but also the needs of consumers. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T03:58:43Z (GMT). No. of bitstreams: 1 ntu-107-R05543052-1.pdf: 6673191 bytes, checksum: 1d52e1ff36e2122bc733fcb8ca6129ab (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 目錄
摘要 I ABSTRACT III 圖目錄 VII 表目錄 X 第一章、 緒論 1 1-1 前言 1 1-2 研究動機 2 第二章、鋰離子電池相關介紹 4 2-1 電池專有名詞解釋 4 2-2固態電池介紹 9 2-2.1 固態電池和液態電池結構差異 9 2-2.2 常見之正極材料 10 2-2.3 常見之負極材料 12 2-2.4 常見之固態電解質材料 14 第三章、文獻回顧 15 3-1 傳統液態電池過充溫度變化情形 15 3-2 量測電池內阻方法 16 第四章、定電流過充實驗 18 4-1 固態電池過充實驗必需性 18 4-2 定電流過充實驗 18 4-2.1 實驗儀器介紹 18 4-2.2 實驗設置 21 4-2.3 定電流過充實驗結果 22 4-2.4 定電流過充重複性實驗 28 第五章、固態電池過充應用 33 5-1延長電池電容量方法 33 5-2 循環伏安法實驗 34 5-2.1 循環伏安法原理 34 5-2.2 循環伏安法實驗設置 36 5-2.3循環伏安法實驗之結果 37 5-3 間歇性電流實驗 40 5-3.1 脈衝電流量測電阻和間歇性電流實驗之關係 40 5-3.2 工作電壓和開路電壓驗證 47 5-3.3 工作內阻和開路內阻差異 56 5-3.4 間歇性電流過充實驗 63 5-4 定電流定電壓老化實驗 68 第六章、固態電池過充模型架構 73 6-1 模型架構和原理 73 6-2 模擬參數與結果 80 6-2.1 模擬參數設置 80 6-2.2模擬結果 83 第七章、結論與未來展望 90 7-1 結論 90 7-2 未來展望 92 第八章、參考文獻 94 | |
dc.language.iso | zh-TW | |
dc.title | 全固態鋰離子電池過充特性的探索 | zh_TW |
dc.title | The application of the all-solid-state lithium-ion battery in overcharge situation | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 郭志禹(CHIH-YU KUO),林祺皓(CHI-HAO LIN) | |
dc.subject.keyword | 全固態電池,鋰離子電池,過充, | zh_TW |
dc.subject.keyword | all-solid-state battery,lithium-ion battery,overcharge situation, | en |
dc.relation.page | 97 | |
dc.identifier.doi | 10.6342/NTU201803015 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2018-08-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-1.pdf 目前未授權公開取用 | 6.52 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。