請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/16259完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 汪重光(Chorng-Kuang Wang) | |
| dc.contributor.author | Shuo-Chun Chou | en |
| dc.contributor.author | 周碩君 | zh_TW |
| dc.date.accessioned | 2021-06-07T18:07:06Z | - |
| dc.date.copyright | 2012-07-27 | |
| dc.date.issued | 2012 | |
| dc.date.submitted | 2012-07-23 | |
| dc.identifier.citation | [1] A. Seo, B. Jagannathan, J. Pekarik, and M. J. W. Rodwell, “A 150 GHz Amplifier With 8 dB Gain and 6 dBm in Digital 65 nm CMOS Using Dummy-Prefilled Microstrip Lines,” IEEE Journal of Solid-State Circuits, vol. 44, no. 12, pp. 3410-3421, Dec. 2009.
[2] N. Deferm and P. Reynaert, “A 100 GHz Transformer-Coupled Fully Differential Amplifier in 90 nm CMOS,” IEEE Radio Frequency Integrated Circuits Symposium Digest of Papers, pp. 359-362, May 2010. [3] A. Tang and M.-C. F. Chang, “183GHz 13.5mW/Pixel CMOS Regenerative Receiver for mm-Wave Imaging Applications,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 296-298, Feb. 2011. [4] A. Siligaris et al., “A 65nm CMOS Fully Integrated Transceiver Module for 60GHz Wireless HD Applications,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 20-24, Feb. 2011. [5] Y.-A. Li, M.-H. Hung, S.-J. Huang and J. Lee, “A Fully Integrated 77GHz FMCW Radar System in 65nm CMOS,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 216-217, Feb. 2010. [6] Y. Nakasha et al., “W-band Transmitter and Receiver for 10_Gb_s Impulse Radio With an Optical-Fiber Interface,” IEEE Transactions on Microwave Theory and Techniques, vol. 57, no. 12, pp. 3171-3180, Dec. 2009. [7] A. Tomkins, P. Garcia, and S. P. Voinigescu, “A Passive W-Band Imaging Receiver in 65-nm Bulk CMOS,” IEEE Journal of Solid-State Circuits, vol. 45, no. 10, pp. 1981-1991, Oct. 2010. [8] A. Arbabian et al., “A 90GHz-Carrier 30GHz-Bandwidth Hybrid Switching Transmitter with Integrated Antenna,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 420-421, Feb. 2010. [9] E. Laskin, M. Khanpour, R. Aroca, K. W. Tang, P. Garcia and S. P. Voinigescu, “A 95GHz Receiver with Fundamental-Frequency VCO and Static Frequency Divider in 65nm Digital CMOS,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 180-605, Feb. 2008. [10] A. Parsa and B. Razavi, “A 60GHz CMOS Receiver Using a 30GHz LO,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 190-606, Feb. 2008. [11] S. Emami, C. H. Doan, A. M. Niknejad and R. W. Broderse, “A Highly Integrated 60GHz CMOS Front-End Receiver,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 190-191, Feb. 2007. [12] K.W. Tang, M. Khanpour, P. Garcia, C. Garnier and S.P. Voinigescu, “65-nm CMOS, W-Band Receivers for Imaging Applications,” IEEE Custom Integrated Circuits Conference, pp. 749-752, Sep. 2007. [13] D. K. Shaeffer, and T. H. Lee, “A 1.5-V, 1.5-GHz CMOS Low Noise Amplifier,” IEEE Journal of Solid-State Circuits, vol. 32, no. 5, pp. 745-759, May 1997. [14] T. H. Lee, “The Design of CMOS Radio-Frequency Integrated Circuits,” CAMBRIDGE, 2004. [15] A. van der Ziel, “Noise in Solid State Devices and Circuits,” Wiley, 1986. [16] B. Razavi, “Design of Analog CMOS Integrated Circuits,” M.H., 2001. [17] B. Afshar, Y. Wang and Ali M. Niknejad “A Robust 24mW 60GHz Receiver in 90nm Standard CMOS,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 182-605, Feb. 2008. [18] K. Okada et al., “A 60GHz 16QAM/8PSK/QPSK/BPSK Direct-Conversion Transceiver for IEEE 802.15.3c,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 160-162, Feb. 2011. [19] C. Weyers, P. Mayr, J. W. Kunze and U. Langmann, “A 22.3dB Voltage Gain 6.1dB NF 60GHz LNA in 65nm CMOS with Differential Output,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 192-606, Feb. 2008. [20] D. Sandstrom, M. Varonen, M. Karkkainen and K. Halonen, “W-Band CMOS Amplifiers Achieving +10dBm Saturated Output Power and 7.5dB NF,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 486-487, Feb. 2009. [21] L. Zhou, C.-C. Wang, Z. Chen and P. Heydari, “A W-band CMOS Receiver Chipset for Millimeter-Wave Radiometer Systems,” IEEE Journal of Solid-State Circuits, vol. 46, no. 2, pp. 378-391, Feb. 2011. [22] B.-J. Huang, B.-J. Huang, K.-Y. Lin and H. Wang, “A 2–40 GHz Active Balun using 0.13μm CMOS Process,” IEEE Microwave and Wireless Components Letters, vol. 19, no. 3, pp. 164-166, Mar. 2009. [23] H.-H. Chiang, F.-C. Huang, C.-S. Wang and C.-K. Wang, “A 90 nm CMOS V-Band Low-Noise Active Balun With Broadband Phase-Correction Technique,” IEEE Journal of Solid-State Circuits, vol. 46, no. 11, pp. 2583-2591, Nov. 2011. [24] H.-H. Chiang, F.-C. Huang, C.-S. Wang and C.-K. Wang, “A 63 GHz Low-Noise Active Balun with Broadband Phase-Correction Technique in 90 nm CMOS,” IEEE Asian Solid-State Circuits Conference, pp. 1-4, Nov. 2010. [25] B. Welch, K. T. Kornegay, H.M. Park and J. Laskar, “A 20-GHz Low-Noise Amplifier with Active Balun in a 0.25-μm SiGe BICMOS technology,” IEEE Journal of Solid-State Circuits, vol. 40, no. 10, pp. 2092–2097, Oct. 2005. [26] S.-H. Weng, H.-Y. Chang and C.-C. Chiong, “A DC-21 GHz Low Imbalance Active Balun Using Darlington Cell Technique for High Speed Data Communications,” IEEE Microwave and Wireless Components Letters, vol. 19, no. 11, pp. 728-730, Nov. 2009. [27] M. Ferndahl and H.-O. Vickes, “The Combiner Matrix Balun, A Transistor Based Differential to Single-Ended Module for Broadband Applications,” IEEE MTT-S International Microwave Symposium Digest, pp. 1-4, June 2011. [28] M. Ferndahl and H.-O. Vickes, “The Matrix Balun—A Transistor-Based Module for Broadband Applications,” IEEE Transactions on Microwave Theory and Techniques, vol. 57, no. 1, pp. 53-60, Jan. 2009. [29] S. Joo, T.-Y. Choi, J.-Y. Kim and B. Jung, “A 3-to-5 GHz UWB LNA with a Low-Power Balanced Active Balun,” IEEE Radio Frequency Integrated Circuits Symposium Digest of Papers, pp. 303-306, June 2009. [30] K. Jung, W. R. Eisenstadt, R. M. Fox, A. W. Ogden and J. Yoon, “Broadband Active Balun Using Combined Cascode–Cascade Configuration,” IEEE Transactions on Microwave Theory and Techniques, vol. 56, no. 8, pp. 1790-1796, Aug. 2008. [31] S. C. Blaakmeer, E. A. M. Klumperink, D. M. W. Leenaerts and B. Nauta, “Wideband Balun-LNA With Simultaneous Output Balancing, Noise-Canceling and Distortion-Canceling,” IEEE Journal of Solid-State Circuits, vol. 43, no. 6, pp. 1341–1350, June 2008. [32] S.-J. Huang, Y.-C. Yeh, H. Wang, P.-N. Chen and J. Lee, “An 87GHz QPSK Transceiver with Costas-Loop Carrier Recovery in 65nm CMOS,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 168-170, Feb. 2011. [33] B. Razavi, “RF Microelectronics,” Pearson, 1998. [34] G. Gonzalez, “Microwave Transistor Amplifiers: Analysis and Design,” Pearson, 2010. [35] I. Sarkas et al., “An 18-Gb/s, Direct QPSK Modulation SiGe BiCMOS Transceiver for Last Mile Links in the 70–80 GHz Band,” IEEE Journal of Solid-State Circuits, vol. 45, no. 10, pp. 1968-1980, Oct. 2010. [36] M. Khanpour, K. W. Tang, P. Garcia and S. P. Voinigescu, “A Wideband W-Band Receiver Front-End in 65-nm CMOS,” IEEE Journal of Solid-State Circuits, vol. 43, no. 8, pp. 1717-1730, Aug. 2008. [37] L. Gilreath, V. Jain and P. Heydari, “Design and Analysis of a W-Band SiGe Direct-Detection-Based Passive Imaging Receiver,” IEEE Journal of Solid-State Circuits, vol. 46, no. 10, pp. 2240-2252, Oct. 2011. [38] D. Murphy et al., “A Blocker-Tolerant Wideband Noise-Cancelling Receiver with a 2dB Noise Figure,” IEEE International Solid-State Circuits Conference Digest of Technical Paper, pp. 74-76, Feb. 2012. [39] A. Jahanian and P. Heydari, “A CMOS Distributed Amplifier With Distributed Active Input Balun Using GBW and Linearity Enhancing Techniques,” IEEE Transactions on Microwave Theory and Techniques, vol. 60, no. 5, pp. 1331-1341, May. 2012. [40] Y. Natsukari and M. Fujishima, “36mW 63GHz CMOS Differential Low-Noise Amplifier with 14GHz Bandwidth,” IEEE Symposium on Very Large Scale Integrated Circuits, pp. 252-253, June 2009. | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/16259 | - |
| dc.description.abstract | 隨著半導體製程的蓬勃發展，電晶體的尺寸不斷的微縮，電晶體所能操作的頻率也不斷上升，近年來使用CMOS製程實現毫米波電路與系統的研究相當受到重視。根據美國聯邦通訊委員會公布之使用規範，81-86 GHz將應用於高速點對點無線通訊系統，此傳輸系統藉由其高傳輸率來做為用戶與整個網路聯接的橋樑，其傳輸範圍可達數公里之遠。然而因為其較遠的傳輸距離及高傳輸率的要求，使用低成本的CMOS製程來實現此毫米波系統為一非常困難的挑戰。因此本論文將著重於81-86 GHz無線接收機前端電路的設計與實現。
由於此系統的傳輸範圍相當遠，對於無線接收機的增益及雜訊指數要求也相當高，本論文提出一個適用於毫米波的低雜訊放大器架構，利用基本放大器的特性相互配合，用較簡單的架構來同時達到高增益和低雜訊。經由實際量測，此低雜訊放大器具有19分貝的順向增益、16 GHz的頻寬、4.3分貝的雜訊指數，並且在0.7伏特及1伏特電壓供應下，消耗功率為21.4毫瓦。 為了提升無線接收機的效能，採用差動訊號的架構可以具有許多優點，如抑制偶數階的諧波失真以及抗拒共模雜訊的能力，因此在低雜訊放大器之後接上一平衡非平衡轉換器，將單端訊號轉為差動訊號，藉由此差動訊號可提升後級電路對抗雜訊的能力。然而在毫米波時，此電路將會具有相當大的增益誤差以及相位誤差，使得差動訊號的優點消失。為了解決此問題，提出一個具有振幅及相位校正技巧的平衡非平衡轉換器，可大幅降低差動訊號的增益誤差及相位誤差，產生較理想的差動訊號。經由實際量測，此平衡非平衡轉換器具有6.1分貝的增益、12 GHz的頻寬、增益誤差和相位誤差在頻寬內分別小於0.36分貝以及2.2度，並且在1伏特的電壓供應下，消耗功率為11.6毫瓦。 | zh_TW |
| dc.description.abstract | With the continuous development of semiconductor process, the size of a transistor decreases rapidly, and the maximum operation frequency is also increased rapidly. The researches for implementation of millimeter-wave circuit and system have become attractive recently. According to the announcement of Federal Communication Commission (FCC) of United States, the 81-86 GHz band is allocated to the high-speed point-to-point telecom system applications. With high data-rate of the system, users can connect to the network through the telecom system. The transmission range of the telecom system covers several kilo-meters. However, owing to long transmission range and high data-rate, how to realize the millimeter-wave system in low-cost CMOS process is a very difficult challenge. Therefore, this thesis will focus on the 81-86 GHz wireless receiver front-end circuit design.
Because the transmission range of telecom system is long, the requirements of gain and noise figure to a receiver are severe. This thesis proposes the LNA architecture, which is suitable for millimeter-wave frequency. By optimal arrangement of topology at each stage, the LNA has high gain and low noise with simple architecture. The LNA has measured 19dB forward gain, 16 GHz bandwidth, 4.3dB noise figure, and the power consumption is 21.4mW with 0.7V and 1V supply voltages. In order to increase the performance of wireless receiver, the differential signals is preferred because many advantages such as suppression of even-order harmonic distortion and better rejection of common-mode noise. Therefore, a balun is used after LNA to transform signal from single-ended to differential. However, the balun has large gain error and phase error in millimeter-wave frequency. In order to solve the problem, the magnitude and phase correction technique (MPCT) is proposed for the balun. This technique can reduce the gain error and phase error effectively even in millimeter-wave frequency. The balun has measured 6.1dB forward gain, 12 GHz bandwidth, gain error and phase error are smaller than 0.36dB and 2.2 degree respectively in 3 dB bandwidth and the power consumption is 11.6mW with 1V supply voltage. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-07T18:07:06Z (GMT). No. of bitstreams: 1 ntu-101-R99943130-1.pdf: 3728428 bytes, checksum: b3d838eb997bbddd08af6352859d9a32 (MD5) Previous issue date: 2012 | en |
| dc.description.tableofcontents | 口試委員會審定書 #
誌謝 i 中文摘要 iii ABSTRACT v CONTENTS vii LIST OF FIGURES ix LIST OF TABLES xii Chapter 1 Introduction 1 1.1 Background 1 1.2 Motivation 4 1.3 The Receiver Front-End of 81-86 GHz High Speed Point-to-Point Telecom System 5 1.4 Organization of This Thesis 7 Chapter 2 W-Band Low noise Amplifier 8 2.1 Introduction 8 2.2 Topologies of LNA 11 2.2.1 Common-Source Structure 11 2.2.2 Cascode Structure 13 2.2.3 Comparison between Common-source and Cascode 14 2.3 Proposed W-band LNA 16 2.3.1 Circuit Architecture 16 2.3.2 Design Consideration 17 2.4 Simulation Result 19 2.5 Measurement Result 25 2.6 Discussion of Inconsistency 32 Chapter 3 Magnitude and Phase Correction Technique for Active Balun 35 3.1 Introduction 35 3.1.1 Conventional Active Balun 35 3.1.2 Phase Correction Technique 37 3.2 Magnitude and Phase Correction Technique 41 3.2.1 Behavior Description 41 3.2.2 Mathematical Analysis 43 3.2.3 Practical Implementation 54 3.3 Simulation Result 57 3.4 Measurement Result 68 Chapter 4 Conclusion 75 References 76 | |
| dc.language.iso | en | |
| dc.title | 應用於81-86 GHz點對點無線傳輸系統之低雜訊放大器與主動平衡非平衡轉換器設計 | zh_TW |
| dc.title | Design Techniques of Low Noise Amplifier and Active Balun for 81-86 GHz High Speed Point-to-Point Telecom System | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 100-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 吳介琮(Jieh-Tsorng Wu),王暉(Huei Wang),劉深淵(Shen-Iuan Liu),郭泰豪(Tai-Haur Kuo),黃柏鈞(Po-Chiun Huang) | |
| dc.subject.keyword | 接收機,低雜訊放大器,平衡非平衡轉換器,震幅和相位校正,增益誤差,相位誤差, | zh_TW |
| dc.subject.keyword | receiver,LNA,balun,magnitude and phase correction,gain error,phase error, | en |
| dc.relation.page | 80 | |
| dc.rights.note | 未授權 | |
| dc.date.accepted | 2012-07-23 | |
| dc.contributor.author-college | 電機資訊學院 | zh_TW |
| dc.contributor.author-dept | 電子工程學研究所 | zh_TW |
| 顯示於系所單位： | 電子工程學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-101-1.pdf 目前未授權公開取用 | 3.64 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。